|
| 1 | Petty repairs to joinery works such as easing of doors, windows, kitchen cabinets , refixing builder hardware gauge etc by providing glue nails and screws to the satisfaction of user andrectifying other misc minor carpentary works assigned by the Engneer In Charge. (Note : Replacement of builders hardware if required shall be measured and paid separately.) |
| 2 | Petty repairs to plumbing/internal water supply works such as repair to leaking bib taps, pillar taps, mixers, stop cocks by tightening and providing washer repair to float valves, low leveled cistern by mixture adjustments leaking water supply lines by tightening the GI fitting or refixing W/S or sanitary fixtures using thread/teflon taps andincluding small GI fittings such as GI elbow, socket, union etc as required at site to the satisfaction of user as assigned by the Engneer In Charge. (Note : Replacement of fittings and fixture like Bib tap, Piller Tap etc. if required shall be measured and paid separately.) |
| 3 | Petty repairs to Aluminium joinery works such as Aluminium Door, Alumnium Windows,Aluminium Ventilators and like similar works such as easing of doors, refixing of door, windows,refixing builder hardware such as Aluminium beadingto the satisfaction of user andrectifying other misc minor carpentary works assigned by the Engneer In Charge. |
| 4 | Demolition of brick or stone/boulder masnory, built in cement mortar. |
| 5 | M & L for brickworks with sub class \"B\" bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 |
| 6 | Taking down cement plaster on brick walls or concrete surfaceincluding raking out joints hacking for key and scrubbing down with water etc. complete all as specified & directed by Engineer-in-Charge. |
| 7 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfacein CM 1:6 finished even & smooth without using extra cement complete all as specified & directed by Engineer-in-Charge. |
| 8 | M&L for 5mm thick rendering in cement mortar in 1:3 to concrete surfaces as in ceilingin patches, finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-Charge. |
| 9 | M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 finished even & smooth without using extra cement complete all as specified & directed by Engineer-in-Charge. |
| 10 | M&L two coats of white wash to new plastered surfaces on ceiling including preparation of surfaces complete all as specified & directed by Engineer-in-Charge. |
| 11 | M&L for two coats of cement base paint on newplasteredsurfaces of walls including prepration of surfaces and priming with alkali resistant priming paint complete all as specified & directed by Engineer-in-Charge. |
| 12 | M&L for two coats of oil bound distemperon newplasteredsurfaces of walls including 3mm thick wall putty on plastered wall surface incl prepration of surfaces and priming with alkali resistant priming paint complete all as specified & directed by Engineer-in-Charge. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 14 | M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete. |
| 15 | M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding0.38 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete. |
| 16 | M & Lfor Non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18sqm but not exceeding0.38 sqm, as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding backing coat 10 mm thick in CM 1:4all as directed. |
| 17 | M&L full body Vitrified Ceramic tiles of light colour shade 8 to 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6, complete all as specified and directed. |
| 18 | M&L full body Vitrified Ceramic tiles of light colour shade 8 to 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, as in skirting to match the vitrified ceramic couloured light shade floor tiles etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 10 mm thick backing or rendering coat of plaster in cement mortar 1:4, complete all as specified and directed. |
| 19 | M&L Glazed ceramic coloured tiles of size 450 mm x 300 mm and 7 mm thickof approved colour as in verticle surfaces such as skirting, dado and risers to steps etc., set and jointed in neat cement slurry and pointed in coloured cement to match completeover and including 10mm thick backing coat in cement mrotar1:4including triangular filleting in cement mortar 1:4 on top of skirting/dado etc complete all as specified and directed. |
| 20 | Taking down chowkhats orwith shutter (without taking off shutter from the frames) & removing from site n exc. 1.5 Sqm each complete all as specified and as directed |
| 21 | Taking down chowkhats orwith shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n. exc. 4 Sqm each. |
| 22 | Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m eachcomplete all as specified and as directed |
| 23 | S&Ffor pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm |
| 24 | S&Ffor pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm |
| 25 | M/L for PCC 1:2:4 type B1 in door frame filling all as specified and directed. |
| 26 | Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing. The door frame shall be tied to wall using 75/100mm long screw as directed |
| 27 | Supply and fixing Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC \" C \"Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing. |
| 28 | S&F factory made 35 mm thick plain framed paneled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and Chemically pressed of 2nd class hard wood. |
| 29 | S & F Glazed skeleton shutter 35mm thk IInd class HW open rebated and prepared to receive glass, gauze etc (without shash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauze etc ; size of members of shutters as specified in SSR Pt-I, section 8 clause 8.24 (a) |
| 30 | S & F galvanised mild steel wore cloth, 0.63mm nominal dia of wire and avg width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples |
| 31 | Taking down steel window / ventilator of any size |
| 32 | S&F aluminium powder coated windowsliding type (3 track) with frame size100x35x1.2mm and shutter 39.40x17.70x1.2mm with two glass shutter & one mesh shutter incl necessary jointing cleatsglazing clips, rubber packing,and locking arrangement powder coated aluminium snap beading screws including 4mm plain float glass & 0.36 mm dia and 1.4 mm width of aperture stainless steel wire mesh, fittings etc complete all as specified. |
| 33 | S&F aluminium powder coated DECOGRILLE 7.5mm width and 6mm thick of design DG-102 having wt 3.131 kg/sqm fixed to and including powder coated aluminium U type frame with CP brass/Stainless steel screws @ 200c/c, including cutting the grill to proper opening size for fixing & operation of handles and fixing & operation of handles and fixing powder coated aluminium section around the opening all as per requirement and direction of Engr-in-charge. |
| 34 | S&F in repair mild steel butt hinges of 100 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed |
| 35 | S&F 250 mm Aluminum alloy, anodised , sliding door bolt with hasp and staple (BOLT TYPE) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed. |
| 36 | Supply only 250 mm Aluminum alloy, anodised , sliding door bolt with hasp and staple (BOLT TYPE) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed. |
| 37 | S&F 150mm long Aluminium anodized, barrel tower bolt of extruded section. |
| 38 | Supply only 100mm long Aluminium anodized, barrel tower bolt of extruded section. |
| 39 | S&F150mm longAluminium handles cast type anodised |
| 40 | Supply only 150mm longAluminium handles cast type anodised |
| 41 | Supply only stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised staples complete all as specified and directed. |
| 42 | Supply only20 mm dia D type CP towel rail 600 mm long between flanges complete all as specified and directed. |
| 43 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones |
| 44 | S& F3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane |
| 45 | S&F4.00 mm thick figured glass pin head type obscured or frosted on one side and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed |
| 46 | S&F floor door stopper, with 150 mm longof brass body and tounge with hard drawn steel spring in floor |
| 47 | Supply only floor door stopper, with 150 mm longof brass body and tounge with hard drawn steel spring in floor |
| 48 | Dismantlingof stone slabs and tilesof any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and as directed. |
| 49 | M&L for Granite stone slab 18 to 20 mm thickpolished as in steps, jambs, pillars, window cills, cooking platforms and like including scrteed 15mm screed bed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with colour, shade and moulding of edges or cutting grooves in steps complete all as specified and directed by Engr-in-charge. |
| 50 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 51 | Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore of pipe complete all as specified and as directed. |
| 52 | Taking up or down steel tubing and connections including cleaning for refixing of 20 mm bore of pipe complete all as specified and as directed. |
| 53 | Fixing only 15 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. |
| 54 | Fixing only 20 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. |
| 55 | M & L for 15 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. |
| 56 | M & L for 20 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. |
| 57 | Dismantling water tanks and removing to store of capacity exc. 250 litres & n.exc 500 litres. |
| 58 | Dismantling water tanks and removing to store of capacity exc. 500 litres & n.exc 1000 litres. |
| 59 | S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe spouts for connecting inlet, outlet, over flow and washout pipes all as specified and as directed. |
| 60 | S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 1000 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe spouts for connecting inlet, outlet, over flow and washout pipes all as specified and as directed. |
| 61 | S & F in repairsball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed (minimum weight 210 gms) complete all as specified and as directed. |
| 62 | Supply onlyball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed (minimum weight 210 gms) complete all as specified and as directed. |
| 63 | Supply only 15 mm dia stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union fixed in repair for 15 mm dia GI pipe all as specified and as directed. |
| 64 | Supply only 15 mm diabib taps fancy type long body chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe complete all as specified and as directed. |
| 65 | Supply only 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed. |
| 66 | Supply only 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe andcomplete all as specified and directed. |
| 67 | Supply only 15mm bore PTMT Bib taps standard any colour screwed down for iron pipe and fixed minimum weight 90 gm complete all as specified and directed. Make: Prayag & equivalent. |
| 68 | Supply only PTMT waste coupling of 32 mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed. |
| 69 | Supply only Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15 mm dia |
| 70 | Supply only Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge |
| 71 | Supply only chromium plated shower rose with swivel joints including fixing to GI pipe for 125mm dia |
| 72 | Supply only glass shelf(450x150mm)with chromium platedguard complete all as specified and directed. |
| 73 | S&F in repair aluminium( Extruded section) body door closer hydraulically regulated , designation No. 3 universal type , suitable for door shutterof 851 to 1000mm in width complete all as specified and directed. Make : Dyna and equivalent ISI marked |
| 74 | Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. from existing water tanks of capacity upto 500 litres of any type and in any position and writing the date of cleaning complete all as specified and directed. |
| 75 | Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. from existing water tanks of capacity exc. 500 litres and not exc. 1000 litres of any type and in any positionand writing the date of cleaning complete all as specified and directed. |
| 76 | Dismantling wall & ceilling boards(fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets complete all as specified and as directed. |
| 77 | S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws toframe work or with staples on snap grid including hangers 3 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat40 X 3 mm size 60 mm longall as specified |
| 78 | Demolition of cement concrete ( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 79 | M & L for 75 mm thick PCC type D-2 1:4:8(40 mm graded aggregate) as in sub base for tiling complete all as specified and as directed |
| 80 | M & L for Chequered cement concrete tiles of 20 cm x 20cm x 25 mm thick with grey cement and pigment,set and jointed in neat cement slurry in floors including 15 mm thick screed bed or bedding layers in cement mortar 1:6 forlaying tiles complete all as specified and as directed. |
| 81 | M & L for cement concrete Type C2 1:3:6(using 40mm graded aggregates) as in plinth protection 75 mm thick finished top surface even and smooth without using extra cement complete all as specified and as directed. |
| 82 | M & L forprecast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment including 25 mm thick sand cushioncomplete all as specified and as directed. |
| 83 | S&F in repairs stainless steel curtainrod 25 mm diacomplete with bracket and side knobs all as specified and directed. |
| 84 | Demolition of cement concrete (unreinforced) in Sukun portionexe15 cm thickness (below or above ground level) complete all as specified and directed. |
| 85 | M & L cement conrete 1:7:12 type F2(uisng 40mm graded aggregate) as in sunkun filling complete all as specified and directed. |
| 86 | Providing and carrying out water proofing treatment to toilet ,sunken slabs ,wet areas etc,after proper surface prepration ,carry out cementitious ingection grouting at leakage point using Cebex 100 plasticised expanding grouting admixture ,application of polymer modified at slab wall junction using Nitoband SBR latex screed modifier cum bonding agent and application ot two coats of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc,complete including 15 mm thick cement plaster in CM 1:4 all tools and plants as per manufacturer\"s specification paint complete all as specified and directed. |
| 87 | S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed in repairs complete all as specified and as directed. |
| 88 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern)white with \"P\" or \"S\" trapincluding connection to drains (or outgoing pipes) and to the flushing pipes, complete all as specified and directed. |
| 89 | Supply only Vitreous China Urinal, Half stall type(back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement including urinal spreader of PTMT any colour for fixing with 15mm dia pipe, PVC connection 15mm x 600mm long, waste coupling of PTMT (Half or full threaded) 40mm dia |
| 90 | Supply only Grating round 100 mm size of PTMT (Minimum weight 25gms.) complete all as specified and as directed. |
| 91 | Supply only stainless steel Sinks for kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe and coupling complete all as specified and as directed. |
| 92 | Supply only Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed. |
| 93 | Supply only for PVC connection pipe 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed. |
| 94 | Supply onlyPVC low/highlevel flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl brackets all as directed. |
| 95 | S & F in repair 300mm ordinary rat tail rod pattern springs including roller and roller plate incl fixing with screw or welding to wood or steel frame complete all as specified |
| 96 | Supply ony 600mmx450mmmirror of selected quality galss, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 97 | S&F in repair PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, or laid in trenches or in floor, bore of pipe 110 mm dia complete all as specified and directedby Engineer-in-Charge. |
| 98 | S&F in repair 110 mm dia PVC (SWR) bends, any radius with access door complete all as specified and directedby Engineer-in-Charge. |
| 99 | S&F in repair 110 mm dia PVC (SWR) vent cowl complete all as specified and directedby Engineer-in-Charge. |
| 100 | S&F in repair PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, or laid in trenches or in floor, bore of pipe 75 mm dia complete all as specified and directedby Engineer-in-Charge. |
| 101 | S&F in repair PVC (SWR) bends any radius, 75mm dia pipe complete all as specified and directedby Engineer-in-Charge. |
| 102 | S&F in repair 75 mm dia PVC (SWR) vent cowl complete all as specified and directedby Engineer-in-Charge. |
| 103 | Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital orsimilar pattern roof covering , in wall clading and velley gutters complete all as specified and directed. |
| 104 | Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed. |
| 105 | M&L rolled sections as in main and cross beams, hip rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed witjh angle cleats or other connecting plates Fe 410 W (gde E 250 ) quality A including a shop coat of zink chromate primer complete all as specified and as directed. |
| 106 | S & F 0.50mm thick pre painted/coloured galvalum aluminium zinc coating GI based corrugated steel sheet of any colourin roofing having tensile strength 550 Mpa fixed with self tapping screws all as specifeed. |
| 107 | All as per item No. 106 above but plain sheet fix in valley gutter / ridge complete all as specified and as directed. |
| 108 | S & F for ready made pully operated cloths drying system incl of four aluminium pipes 1.8m long each (04 pipe set) outer dia 22mm and inner dia 19.8mm channel assembly, locking system ropes and all fixing materials complete all as specified and as directed |
