|
| 1 | Supply, Installation, Testing & commissioning of following indoor /outdoor, energy efficient LED Luminaires: Note: The performance (Electrical & mechanical) of the luminaires shall to be WARRANTEED for a period of minimum 5 Years by luminaire OEM.The technical datasheet along with LM-79 & LM-80 and driver test reports from NABL accredited lab for all the luminaires shall be submitted for approval. |
| 2 | Indoor type, surface/suspended mounted, Linear (4FT) design for diffused low/free glare light output, LED high-bay/mid-bay luminaire (suitable for sports lighting) with CRCA robust construction with epoxy powder coating, high transmittivity opal optical diffuser for diffused uniform illumination and reduced glare with nominal lumen output as 18000 lumen and minimum efficacy as 120 lumen/watt, Colour temperature: 5700/6000K, pf: 0.95(min),Optics material: Glass, Optical Cover: Glass/Polycarbonate, wide beam angle, IP: 54, IK: 08, internal surge protection level ≥ 4 kV & 10 kV external surge protection, CRI ≥ 80, THD ≤ 10 %, life class: L70B50 @ 50000 Hrs. with all accessories, built-in driver & all required fixing/installation accessories & hardware and as per our technical specifications. LEDs used in the product shall comply with IEC 62471 for Photo-biological safety.Max. working height is 8 meters above ground level. Note: The design of illumination shall be done by OEM of luminaire @ avg. 500 lux level on the badminton court & same shall be submitted for approval. |
| 3 | Indoor type, surface/suspended mounted, Linear (4FT) design for diffusedlow/free glare light output, LED high-bay/mid-bay luminaire (suitable for sports lighting) with CRCA robust construction with epoxy powder coating, high transmittivity opal optical diffuser for diffused uniform illumination and reduced glare with nominal lumen output as 9600 lumen and minimum efficacy as 120 lumen/watt, Colour temperature: 5700/6000K, pf: 0.95(min),Optics material: Glass, Optical Cover: Glass/Polycarbonate, wide beam angle, IP: 54, IK: 08, internal surge protection level ≥ 4 kV & 10 kV external surge protection, CRI ≥ 80, THD ≤ 10 %, life class: L70B50 @ 50000 Hrs. with all accessories, built-in driver & all required fixing/installation accessories & hardware and as per our technical specifications. LEDs used in the product shall comply with IEC 62471 for Photo-biological safety. Max. working height is 8 meters above ground level. |
| 4 | Solar powered LED bollard luminaire with 300 lumen output, IP65/66. driver, interconnector and necessary mounting accessories & hardware. This item includes mounting foundation/ installation supports. The luminaire shall have solar PV panel, Li-ion/Li-ferro phosphate battery, charging circuit with diffused acrylic optical cover in same housing. The item includes necessary mounting base and hardware. |
| 5 | Indoor surface mounted LED type downlight luminaire with CRCA powder coated steel housing, nominal Luminous output as 1600 lumen, minimum efficacy as 100 lm/W, Colour temperature: 5700/6500K, pf: 0.9(min) , THD: <10%,CRI: >80 ,Life Class: L70B50 @ 50000 hrs, Optics: High quality diffuser & complete with all accessories, driver & all required fixing accessories & hardware etc. |
| 6 | Indoor industrial, linear (1200 mm linear length), surface/suspended mounted, high efficiency robust LED luminaire with powder coated steel housing with nominal output as 4000 and efficacy as >120 lumen/watt, Colour temperature: 5700/6500K, Beam angle: 120°, pf: 0.9(min) , THD ≤ 10%,CRI ≥ 80 , Optics: High quality polycarbonate diffuser, life class: L70B50 @ 50000 Hrs. & complete with all accessories, driver & all required fixing accessories & hardware etc. Max. working height is 5 meters above ground level. |
| 7 | Outdoor type, surface mounted Bulk head luminaire having nominal output as 900 lumens and output lumen efficacy as 100 lumen/watt, Colour temperature: 5700/6500K, pf: 0.9(min), THD: < 10%,CRI: >80 with all accessories, driver & all required fixing accessories & hardware etc. |
| 8 | Supply, Installation, Testing & Commissioning of concealed in wall/ surface mounted MS prefabricated powder coated power distribution board(DB) having IP42 ingress protection class & along with all switchgears, accessories & required hardware. |
| 9 | Incomer: 125A FP MCCB (Ics≥36kA) with microprocessor based trip release for O/C & S/C protection (LSI) having independent adjustable current & time settings for O/C & S/C protection - 1 No.Outgoing: a) 10/16/20/25/32A, SP MCB, C-curve(10 kA) - 24 Nos. 8 way/phase, VTPN DB |
| 10 | Incomer: 63A FP RCBO, Ics≥16kA, 30-100 mA earth leakage current sensitivity.Outgoing: a) 10/16/20/32A SP MCB, C-curve (10 kA) - 24 Nos.8 way/phase, VTPN DB |
| 11 | Supply, Installation, Testing & Commissioning of single phase heavy duty exhaust fans as per following ratings:Note: The technical datasheet of fans shall be submitted for approval |
| 12 | Single phase, 300 mm sweep, heavy duty type, Exhaust fan (speed ~1440 rpm) with wall cowl |
| 13 | Single phase, 450 mm sweep, heavy duty type, Exhaust fan (speed ~1440 rpm) with wall cowl |
| 14 | Supply and Installation of ERW MS conduit pipes of following sizes to be installed inside the RCC slab/inside the bricks wall/surface/on Metallic structure along with bends, junction boxes, metallic boxes, saddle, clamp, binding wire & all required materials. The jointing of two section of conduit shall be done using threaded section of conduit. For mounting of conduit, any cutting/chasing & repairing with mortar finishing of similar combination in the existing RCC/brick wall shall be part of the work. |
| 15 | 32 mm dia |
| 16 | 25 mm dia |
| 17 | 20 mm dia |
| 18 | Supply, fixing & Installation of 50x50 mm PVC Cable management system with PVC body with cover, suitable partition (if required), all types of angles/bends (wherever required), joint cover (internal & external) & all required accessories as per site requirement. All material required for fixing will be in the scope of contractor. |
| 19 | Supply, fixing & Installation of 25 mm width PVC Casing-n-caping system with PVC body with cover. The item shall include all types of angles/bends (wherever required), joint cover (internal & external) & all required accessories as per site requirement. All material required for fixing will be in the scope of contractor. |
| 20 | Supply, pulling and end termination, testing & commissioning of FRLSH PVC insulated flexible Copper wire of following size in concealed/surface mounted MS conduit pipes along with end terminations & all required material/hardware |
| 21 | 4 sq.mm wire length |
| 22 | 2.5 sq.mm wire length |
| 23 | 1.5 sq.mm wire length |
| 24 | 1 sq.mm wire length |
| 25 | Supply, Installation, Testing & Commissioning of concealed/surface mounted modular type switch boards of suitable size along with white colour cover plate with metal frame, MS/Plastic flush box, blanking plate and all required accessories. |
| 26 | (2x16A+2x6A), 230/240 V switch and Socket board (12 module) with all accessories. |
| 27 | RJ11 Modular telephone socket board |
| 28 | RJ45 Modular data socket board suitable for CAT-6 cable |
| 29 | 6A, 230V, 1-way Modular switch |
| 30 | Supply, installation, testing & commissioning of surface/wall mounted/ concealed 220-240VAC, 50 Hz, 360 Degree angle detection 6-7 meter range with adjustable setting from 30 sec. or less to 25 minutes, movement sensor/detector for Lighting & ventilation Control with adjustable time delay & min. 500 watt capacity for controlling. |
| 31 | Supply, Installation, Testing & commissioning of concealed/surfacemounted prefabricated & industrial type single phase 20A metal clad socketwith 20A SP MCB and top along with supply of all required material/hardware. The make of MCB/MCCB using for this item shall be identical with switchgear of upper end wall distribution board. |
| 32 | Supply, fixing/laying and Installation of earthing strip/wire: |
| 33 | Hot Dipped Galvanised Iron (GI) earthing conductor (50x6/32x6/25x3strip/wire) including required hardware for installation |
| 34 | Copper earthing conductor (50X6/32X6/25X3strip/wire) including required hardware for installation |
| 35 | Providing, fabricating, cutting, erecting, and fixing in position structural steelworks of any shape using ISMBs, Joists, channels, angles, flats, Tees etc.of minimum grade Fe 250, at all levels including welding, painting with a primary coat of steel primer & black paint and transportation etc. complete as per specifications and as directed by Engineer-in-Charge. |
| 36 | Supply, fabrication & installation ofgalvanized sheet steel bus duct/Cable trays/Cable Tray Cover/Panel & M.Sboxes with complete chemical & mechanical treatment on M.S sheet/MS structure etc. duly power coated, rubber gasketed, with locking arrangement, earthing bolt etc. will be provided on the fabricated items as per site requirement and specifications. |
| 37 | Supply, Installation, Testing & Commissioning of 1100 V, 4/3.5Cx50 sq. mm stranded Aluminium conductor, XLPE insulated, Extruded PVC inner sheath, FRLSH PVC outer sheathed & GI flat armoured power cables in ground as per IS: 1255. All required material (Power cable, manual excavation for trench in ground brick, sand, pipe etc), transportation, material handling, manpower etc required for cable installation, testing & commissioning are included in this item. |
| 38 | Only Installation, Testing & commissioning of 1100 V, 4/3.5Cx10/6/4/2.5 sq. mm Copper/Aluminium armoured/unarmoured/flexible Aluminium/copper conductor, XLPE/PVC insulated, power cable in/on/at Hume pipe/wall/cable tray/MS support etc as per IS: 1255. All required fixing material & hardware for cable installation, testing & commissioning are included in this item |
| 39 | Only Installation, Testing & commissioning of 1100 V, 4/3.5Cx50/35/25/16 sq. mm Copper/Aluminium armoured/unarmoured Aluminium/copper conductor, XLPE/PVC insulated, power cable in ground as per IS: 1255. All required material (Manual excavation for trench in ground, brick, sand, pipe etc), transportation, material handling, manpower etc required for cable installation, testing & commissioning are included in this item. |
| 40 | Supply, Installation, Testing & commissioning of End termination of Aluminium/Copper, armoured power cables of following sizes with double compression gland |
| 41 | 4/3.5Cx50 sq. mm, Aluminium armoured power cable |
| 42 | 4/3.5Cx25/16/10/6/4/2.5 sq. mm Copper/Aluminium armoured/unarmoured power cable |
| 43 | Supply & Installation of Cable Route Marker made out of ready made \"LT Cable\" marking plate fixed on ISA 50x50x5 mm/ 50 mm dia Class-B MS pipe with masonry work of 200x200x200 mm. |
| 44 | Excavation in all type of soil for foundation/trenches for cable/Earthing route etc. |
| 45 | Road/RCC Path cutting: Bituminous/WBM/PCC path cutting for laying power cable/Hume pipes/ GI pipes etc as per site requirement including disposal of unserviceable materials within 500 metres lead etc |
| 46 | Supply, Installation, Testing & Commissioning of GI plate Earth Stations (EE/NE/LE) of 600x600x6.3mm size as per our tender drawing along with supply of all required material/hardware. Attached drawing & detailed specifications shall be referred. |
| 47 | Providing and placing in position reinforcement (and fixing with aluminium binding wire) using TMT bars for RCC work as per drawing and directions of engineer-in-charge. |
| 48 | Supply and preparation of M20 grade cement concreting works including excavation in all types of soil, murrum, form work, shuttering, curing with clean water, for repair of road cuttings at various locations. Detailed specifications and directions of engineer-in charge shall be followed. |
