|
| 1 | FIXING & INSTALLATION OF T OFF CHANNEL |
| 2 | SUPPLY & INSTALLATION OF CLAMP WITH BOLT & NUT |
| 3 | FIXING & INSTALLATION OF 11 KV DISC INSULATOR |
| 4 | FIXING & INSTALLATION OF 11 KV DISC FITTING |
| 5 | FIXING & INSTALLATION OF 11 KV PIN INSULATOR WITH PIN |
| 6 | FIXING & INSTALLATION OF F BRACKET WITH BOLT & NUT |
| 7 | FIXING & INSTALLATION OF E BRACKET |
| 8 | FIXING & INSTALLATION OF 3x120 MM 11 KV XLPE CABLE |
| 9 | FIXING & INSTALLATION OF I/D & O/D CABLE JOINTING KIT FOR SUITABLE FOR 11 KV 3x120 MM |
| 10 | LAYING OF 11 KV CABLE INCLUDING COST OF SAND & BRICKS |
| 11 | FIXING & INSTALLATION OF 11 KV CT PT POLE MOUNTED COMBOUND UNIT RATION 25x5 AMP |
| 12 | FIXING & INSTALLTION OF METER BOX 11 KV 110 VOLT TVM 11 KV |
| 13 | FIXING & INSTALLTION OF 3 PH 4 W TVM 11 KV |
| 14 | FIXING & INSTALLTION OF 3 PHASE 4 W TVM 11 KV |
| 15 | FIXING & INSTALLATION OF PILFER PROOF METERING CUBICAL WITH CT RATION 20/5 AMP 11 KV/110 V |
| 16 | FIXING & INSTALLTION OF 11 M STP POLE |
| 17 | SUPPLY & INSTALLTION OF STONE PAD 300x300x75 MM |
| 18 | FIXING & INSTALLTION OF X ARM MS ANGLE 65x65x6 MM V TYPE |
| 19 | FIXING & INSTALLATION OF CROSS ARM HOLDING CLAMP WITH BOLT & NUT |
| 20 | FIXING & INSTALLATION OF ACSR WEASEL CONDUCTOR |
| 21 | FIXING & INSTALLATION OF MS CHANNEL 100x50x2028 MM |
| 22 | FIXING & INSTALLATION OF TOP CHANNEL 100x50x2240 MM |
| 23 | SUPPLY & INSTALLATION OF CLAMP FOR CHANNEL, TOP CHANNEL TPMO AND FUSE |
| 24 | FIXING & INSTALLATION OF 11 KV DISC INSULATOR 45 KN |
| 25 | FIXING & INSTALLATION OF 11 KV DISC FITTING 45 KN |
| 26 | FIXING & INSTALLATION OF PIN INSULATOR WITH PIN INSULATOR |
| 27 | FIXING & INSTALLTION OF E BRACKET |
| 28 | FIXING & INSTALLATION OF 11/0.4 KV 100 KVA TRANSFORMER |
| 29 | FIXING & INSTALLATION OF 11 KV TPMO |
| 30 | FIXING & INSTALLATION OF 11 KV FUSE SET |
| 31 | FIXING & INSTALLATION OF LT PVC CABLE AL 3.5x400 SQMM |
| 32 | FIXING & INSTALLATION OF AL LEG LONG BARREL OFF SIZE |
| 33 | FIXING & INSTALLATION OF DANGER BOARD WITH CLAMP FOR 11 KV |
| 34 | FIXING & INSTALLATION OF PG CLAMP |
| 35 | FIXING & INSTALLATION OF BARBED WIRE |
| 36 | FIXING & INSTALLATION OF ALLUMINIUM WINDING WIRE 6 SWG |
| 37 | SUPPLY & INSTALLATION OF ALLUMINIUM PAINT |
| 38 | SUPPLY & INSTALLATION OF RED OXIDE PAINT |
| 39 | SUPPLY & INSTALLATION OF BOLT NUT & WASHER |
| 40 | FIXING & INSTALLATION OF STAY ROD 16x1800 MM |
| 41 | FIXING & INSTALLATION OF STAY WIRE GI (7/3.15 MM) |
| 42 | FIXING & INSTALLATION OF 11 KV STAY INSULATOR |
| 43 | FIXING & INSTALLATION OF 11 KV STAY CLAMP FOR STP POLE |
| 44 | FIXING & INSTALLATION OF EARTHING COMPLETE |
| 45 | FIXING & INSTALLATION OF GROUTING STAY |
| 46 | FIXING & INSTALLATION OF GROUTING OF POLE |
| 47 | SUPPLY & INSTALLATION OF GI PIPE 32 MM PIPE |
| 48 | SUPPLY & INSTALLATION OF COPPER CORE 750 GM WEIGHT |
| 49 | SUPPLY & INSTALLATION OF COPPER WIRE 6 SWG |
| 50 | SUPPLY & INSTALLATION OF COPPER BOND |
| 51 | SUPPLY & INSTALLTION OF MAKE HOLD OF SIZE 18 MM DIA IN GI PIPE |
| 52 | SUPPLY & INSTALLATION OF BOARING OF PIPE |
| 53 | FENCING OF SIZE 10\"x6\" ALL ROUND WITH GATE ANGLE SIZE 40x5 MM & IRON NET 25x25 MM DEEP 2\" LONG 40x5 MM ANGLE UNDER SUPPORT BEAM 2x9\" ABOVE EARTH GROUND LEVEL AND ALL ROUND BEAM JAIL OF SIZE 12 MM, MS TORE SHALL BE FIXED IN THE HOLLOW OF THEAM BEAM ALL ROUND |
| 54 | SUPPLY & INSTALLATION OF GI PIPE 6\" DIA |
| 55 | FIXING & INSTALLATION OF DROPPER CHANNEL 100x50x2000 MM |
| 56 | FIXING & INSTALLATION OF ACSR DOG CONDUCTOR |
| 57 | FIXING & INSTALLATION OF D POLE CLAMP |
| 58 | FIXING & INSTALLTION OF ALLUMINIUM TAPE |
| 59 | FIXING & INSTALLATION OF NUMBER PLATE |
| 60 | FIXING & INSTALLATION OF 400 KVA |
| 61 | CONSTRUCTION OF PLINTH |
| 62 | EARTHING OF TF BODY AND NEUTAL |
| 63 | FIXING & INSTALLATION OF 4 CORE LT MCB WITH BOX |
| 64 | FIXING & INSTALLTION OF 11 KV VCB |
| 65 | EARTHING OF VCB |
| 66 | FIXING & INSTALLTION OF 8.5 M PCC POLE |
| 67 | FIXING & INSTALLTION OF JOITING SLEEVES FOR ACSR WEASEL |
| 68 | FIXING & INSTALLTION OF MS ANGLE 75x75x62028 MM |
| 69 | FIXING & INSTALLTION OF TRANSFORMER 25 KVA |
| 70 | FIXING & INSTALLTION OF ABC CABLE 3x50+1x35+1x16 SQMM |
| 71 | FIXING & INSTALLTION OF DEAD & CLAMP WITH EYE HOOK (INSULATED) |
| 72 | FIXING & INSTALLTION OF LT INSULATING PIERCING CONNECTOR CLAMP OF SIZE 3x120 & 3x95 & 3x50 FOR ABC |
| 73 | FIXING & INSTALLTION OF SUSPENSION CLAMP WITH EYE HOOK |
| 74 | FIXING & INSTALLTION OF DISTRIBUTION BOX 3 PHASE |
| 75 | FIXING & INSTALLTION OF CLAMP WITH NUT & BOLT FOR DISTRIBUTION BOX |
| 76 | FIXING & INSTALLTION OF TF BASE ANGLE |
| 77 | FIXING & INSTALLTION OF LT PVC CABLE 3.5x70/5 SQMM |
| 78 | FIXING & INSTALLTION OF UG AL. 25 SQMM Please Enable Macros to View BoQ information |
