|
| 1 | Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breakinglead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: Up to 150 mm diameter. |
| 2 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in Charge. |
| 3 | Demolishing cement concrete 1:3:6 or richer mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 4 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge at internal Work- Exposed on wall. |
| 5 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand). |
| 6 | Providing and fixing 15 mm dia nominal bore Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1m spacing. This includes jointing of pipes & fittings with one step cpvc solvent cement and cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. |
| 7 | Providing and fixing 20 mm dia nominal bore Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1m spacing. This includes jointing of pipes & fittings with one step cpvc solvent cement and cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. |
| 8 | Providing and fixing 25 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes for external work, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step cpvc solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. |
| 9 | Providing and fixing 100 mm inlet and 100 mm outlet Sand Cast Iron S&S as per IS- 1729 Trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : Sand Cast Iron S&S as per IS: 1729. |
| 10 | Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 100 mm dia. |
| 11 | Providing and fixing soil, waste and vent pipes : 100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989. |
| 12 | Providing and fixing mirror of superior glass (of approved quality) and of rectangular shape and size 453 x 357 mm with plastic moulded frame of aprroved make and shade with 6 mm thick hard board backing. |
| 13 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia of Sand cast iron S&S as per IS - 1729. |
| 14 | Providing and fixing plain bend of required degree. 100 mm dia Sand cast iron S&S as per IS - 1729. |
| 15 | Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x100x100 mm Sand cast iron S&S as per IS - 1729. |
| 16 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 17 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 18 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 19 | Providing and fixing Kitchen sink with drain board 510x1040 mm bowl depth 250 mm of Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. |
| 20 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 21 | Providing and fixing Flexible pipe 32 mm dia. P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. |
| 22 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter. |
| 23 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms of 15 mm nominal bore. |
| 24 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 of 15 mm nominal bore. |
| 25 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore. |
| 26 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore. |
| 27 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 15 mm nominal bore . |
| 28 | Providing and fixing 15mm nominal diameter CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer-in-Charge. |
| 29 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 30 | Carriage of material by mechanical transport including loading, unloading and stacking uptolead of 3 KM. |
| 31 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./H.P.H.D. plastic ball. 20mm nominal bore, 120mm long, weighing not less than 198gms. |
| 32 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 25 mm nominal bore, 152mm long, weighing not less than 440 gms. |
| 33 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall, 15 mm dia nominal bore, medium quality. |
| 34 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall, 20 mm dia nominal bore, medium quality |
| 35 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall, 25 mm dia nominal bore, medium quality. |
| 36 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall, 40 mm dia nominal bore, medium quality |
| 37 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall, 50 mm dia nominal bore, medium quality. |
| 38 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall, 15 mm dia nominal bore, medium quality. |
| 39 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall, 20 mm dia nominal bore, Medium quality. |
| 40 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching(at least 1m depth) and refilling etc. External work, 15 mm dia nominal bore, medium quality. |
| 41 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching(atleast 1m depth) and refilling etc External work, 20 mm dia nominal bore, medium quality. |
| 42 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching(at least 1m depth) and refilling etc External work, 25 mm dia nominal bore, medium quality. |
| 43 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching (atleast 1m depth) and refilling etc External work, 40 mm dia nominal bore, medium quality. |
| 44 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching (atleast 1m depth) and refilling etc External work 50 mm dia nominal bore, medium quality. |
| 45 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching(atleast 1m depth) and refilling etc. External work 80 mm dia nominal bore. |
| 46 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore |
| 47 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 50 to 80 mm nominal bore |
| 48 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge, 15 mm to 40 mm nominal bore. |
| 49 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge Above 40 mm nominal bore\" |
| 50 | Supplying and filling in W.C with sand under floors, including watering, ramming and consolidating complete after throwing existing choked sand as per direction of EIC. |
| 51 | Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 52 | Providing and fixing 25 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end). |
| 53 | Providing and fixing 40 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end). |
| 54 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore. |
| 55 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 80 mm nominal bore. |
| 56 | Providing and fixing 15 mm nominal bore with 60 cm length unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
| 57 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. |
| 58 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 20 mm nominal bore. |
| 59 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 25 mm nominal bore. |
| 60 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 32 mm nominal bore. |
| 61 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 40 mm nominal bore. |
| 62 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 50 mm nominal bore |
| 63 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 80 mm nominal bore. |
| 64 | Providing and fixing 75 mm dia. soil, waste and vent pipes :Sand cast iron S&S pipe as per IS: 1729. |
| 65 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 75 mm dia pipe. |
| 66 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 100 mm dia pipe. |
| 67 | Providing and fixing 75 mm dia. sand cast iron S&S bend as per IS: 1729 of required degree with excess door insertion rubber washer 3 mm thick bolts & nuts complete. |
| 68 | Providing and fixing 75 mm dia Sand cast iron S&S plain bend as per IS - 1729of required degree. |
| 69 | Providing and fixing 100x100x100x100mm Sand cast iron S&S as per IS - 1729 double equal plain junction of required degree. |
| 70 | Providing and fixing 75x75x75 mm Sand cast iron S&S as per IS - 1729 single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 71 | Providing and fixing 100x100x100 mm sand cast iron S&S as per IS - 1729 single equal plain junction of required degree. |
| 72 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 73 | Providing and fixing 75x75x75 mm sand cast iron S&S as per IS - 1729 single equal plain junction of required degree. |
| 74 | Providing and fixing 100x100x75x75 mm sand cast iron S&S as per IS - 1729 double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 75 | Providing and fixing 100x100x75x75 mm sand cast iron S&S as per IS - 1729 double unequal plain junction of required degree. |
| 76 | Providing and fixing 100x100x75 mm sand cast iron S&S as per IS - 1729 single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 77 | Providing and fixing 100x100x75 mm sand cast iron S&S as per IS - 1729 single unequal junction of required degree |
| 78 | Providing and fixing 100 mmsand cast iron S&S as per IS - 1729 door piece, insertion rubber washer 3mm thick, bolts & nuts complete. |
| 79 | Providing and fixing 75 mmsand cast iron S&S as per IS - 1729 door piece, insertion rubber washer 3mm thick, bolts & nuts complete. |
| 80 | Providing and fixing 100 mm M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter. |
| 81 | Providing and fixing 75 mm M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter. |
| 82 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm. |
| 83 | Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan. |
| 84 | Providing and fixing 10 litre capacity - white P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 85 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 mm. |
| 86 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 87 | Providing and fixing 600 x 450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete. |
| 88 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter. |
| 89 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter. |
| 90 | Providing and laying 100 mm diameter S.W. Pipe with cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design. |
| 91 | Providing and laying 150 mm diameter S.W. Pipe with cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design . |
| 92 | Dismantling of 100 mm diametre old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps. |
| 93 | Dismantling of 150 mm diametre old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps. |
| 94 | Excavating trenches of required width for Pipes, cables etc. not exceeding 80 mm dia, including excavation for sockets, depth upto 1.5 m, width 450mm, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m : Ordinary rock. |
| 95 | Providing and fixing 15 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. |
| 96 | Providing and fixing 20 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. |
| 97 | Providing and fixing 25 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. |
| 98 | Providing and fixing 40 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work. |
| 99 | Providing and fixing 50 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. |
| 100 | Providing and fixing 80 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. |
| 101 | Providing and fixing 100 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. |
| 102 | Providing and fixing 15 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. |
| 103 | Providing and fixing 20 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. |
| 104 | Providing and fixing 25 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. |
| 105 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 106 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :Flat back wash basin of size 550x400 mm. |
| 107 | Providing and fixing stainless steel circular type of 100 mm nominal diameter grating. |
| 108 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 100 mm nominal bore. |
| 109 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 100 mm nominal bore. |
| 110 | Providing and fixing Flexible pipe 32 mm dia. P.V.C. waste pipe for sink or wash basin excluding C.P waste fittings complete. |
| 111 | Providing and fixing 15 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end). |
| 112 | Providing and fixing 20 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end). |
| 113 | Supplying, fitting and fixing of aluminium sheet of 1mm thick in the doors of Bath/W.C.including the cost of nails, screws, etc. as per the insruction of the Engineer-in-charge. |
| 114 | Cleaning of gutters (Concrete/S.W./C.I. waste pipe lines), associated manholes chambers, gully pit, inspection chamber, etc. of assorted size. The soil, sand, leaves, undissolved solid waste maerials, etc. need to be removed and dispose to far away in suitable place. (pipe length will be considered for payment). |
| 115 | Removing dead animal from colony premises to outside the colony campus as directed by Engineer-in-Charge. |
| 116 | Underground boring or tunneling below bituminous or concrete road atleast at a depth of 1.5m and laying of pipes with jointing. Payment of Pipes will be separate. |
| 117 | Supply, fittings & fixing of CPVC/G.I. pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 including jointing of pipes & fittings with one step PVC solvent cement, trenching, refilling/ exposed on wall/concealed complete and threaded to match with GI Pipes as per IS : 1239 (Part - I). PVC/G.I. of Socket/elbow/Tee/nipple/reducer/union/MTA/FTA/Bush/plug/jamnut (all type of fittings) of nominal diameter 15mm to 40mm. |
| 118 | Supply, fittings & fixing of CPVC/G.I. pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 including jointing of pipes & fittings with one step PVC solvent cement, trenching, refilling/ exposed on wall/concealed complete and threaded to match with GI Pipes as per IS : 1239 (Part - I). PVC/G.I. of Socket/elbow/Tee/nipple/reducer/union/MTA/FTA/Bush/plug/jamnut (all type of fittings) of nominal diameter above 40mm. |
| 119 | Dismantling concrete/mosaic flooring (thickness 100mm or more) of W.C., Pocelin Pan, old trap, pipes and replacement of existing old clogged sand by new sand including disposal of rubbish to the dumping ground within 1 Km lead.After fresh sand filling new cement concrete (1 Cement: 2 Sand: 4 Coarse Aggregate)flooring of thickness 100 mm need to be done to fix commode. (The rate will considered for complete work as per area of floor excluding the cost of new commode fixing) |
| 120 | Dismantling of any plumbing fittings (PAN/Towel Bar/ Trap/ Basin/ Sink/Mirror/ Shower/CI Pipe/ GI Pipe etc.) each coplete job in one quarter. |
| 121 | Checking of float valve in over head tank, valve operation, repair, washing of pipe in complete job for smooth flow of water in inlet or outlet pipe lines. |
| 122 | Providing and fixing of PVC cover on 500 litre/1000 lit/ 2000 litre water tank on roof. Rate is for each tank work. |
| 123 | Earth cutting and refilling of depth 1 m or more and cleaning of GI / MS ferul by cutting of existing water supply line of any dia and refixing by welding. In each case provide one new GI union. Where rusting is more replace the GI ferul pipe. |
| 124 | Providing and fixing of washer of any size in bib cock, pllar cock, long nose bib cock, etc. wherevere necessary in any height. |
| 125 | Supply of 40 mm Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007 Ball Valve. |
| 126 | Supply of 50 mm Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007 Ball Valve. |
| 127 | Soft Close seat cover of approved make with lid and C.P. hinges, rubber buffer and brass screws suppling, fitting and fixing complete. E W C (Model Code No. B1520118 of CERA or equivalent). |
| 128 | Renewing bolts and nuts for cistern. |
| 129 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. Polythene Flush Pipe. |
| 130 | Supplying, fitting and fixing Waste fittings completeC.P. over brass 40 mm |
| 131 | Supplying, fitting and fixing shower of approved brand and make Hand Shower(Health Faucet) with 1mtr Fexible Tube with WallHook(Equivalent to Code No.573 & Model -ALLIED of Jaquar orsimilar). |
| 132 | Supplying, fitting and fixing pillar cock of approved make CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 133 | Cleaning and disinfecting upto 2000 litre Water Tank including masonry reservoir. Steps: i) Cleaning of tank by pressure jet of water, ii) Vaccuum cleaning to eliminate sand/dust/mud etc. particles. iii) Disinfection byChlorination/Sodium Hypo Chloride. iv) Treatment by Ultra violet rays inside the tank, all complete. |
| 134 | Removing chokage of water closet, urinal and waste trap.work must be completed in the same day of complain. |
