|
| 1 | M & L forpreparation of old decorated surfaces of walls and applying one coat of cement based paint of approved shade/tint all as specified and directed. |
| 2 | M & L for preparation of new plastered surfaces of walls and applyingtwo coats of cement base paint over one coat of priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed. |
| 3 | M & L forpreparation of old decorated surfaces of wallsand applying two coats of cement based paint of approved shade/tint all as specified and directed. |
| 4 | M & L for preparation of old painted surfaces of wood and wood based material of any description otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 5 | M & L for preparation of old painted surfaces of wood and wood based material of any description otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint all as specified and directed. |
| 6 | M & L forpreparation of old decorated plastered/unplastered surfacesincluding cornics pillasters and wall features by washing, rubbing down and stopping of distemper and painted surfaces of wall and applying one coat of oil bound distemper (OBD) complete all as specified and directed. |
| 7 | M & L forpreparation of old decorated plastered/unplastered surfaces including cornics pillasters and wall features by washing, rubbing down and stopping of distemper and painted surfaces of wall and applying two coats of oil bound distemper (OBD) complete all as specified and directed. |
| 8 | M & L forone coat of white wash on plastered/unplastered surfaces of ceilings including and preparation of old surface of walls complete all as specified and directed. |
| 9 | M & L forpreparation of old plastered or un plastered surfaces or concrete surfaces and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 10 | M & L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a chalk whiting on plastered surfaces preparatory to distempering complete all as specified and directed. |
| 11 | M & L for preparation of treated or untreated surfaces of wall and applying white cement putty of 1 mm thickness over plastered surfaces to prepare the surface even and smooth complete all as specified and directed. |
| 12 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed. |
| 13 | M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick masonry or concrete surfaces of walls using liquid water proofing compound @3% of cement even and smooth without using extra cement complete all as specified and directed. |
| 14 | M & L rendering 15mm thick in cement mortar (1:6) on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified and directed. |
| 15 | M & L rendering 5mm thick in cement mortar (1:3) on fair faces of ceiling and finished surfaces without using extra cement complete all as specified and directed. |
| 16 | Demolition of brick work in cement mortar incl all quoins, pillar etc complete all as specified and directed. |
| 17 | M & L for brick work with sub class \"B\" brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar (1:6) etc complete all as specified and directed. |
| 18 | S & F in repair vitreous china squatting pan of (orrisa pattern) \"long pan\" size 580mm x 440mm white (ISI marked) with intergal foot rest with \"P\" or \"S\" trap (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 19 | S & F as in repair vitreous china ware wash down water closet pan (Padestal pattern), white (ISI marked), excluding fixing bolts with including jointing to flushing cisterrn and flushing pipe, anti-syphonoage pipe incl health fusset etc complete all as specified and directed. |
| 20 | S & F in repair vitreous china wash hand basin, white flat back of size 580mm x 450mm white (ISI marked) excluding taps, waste pipe, chain and plug and porcelain but including brackets complete all as specified and directed. |
| 21 | S & F in repairs 15mm dia fancy typer Pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or withoutlettered \"Hot\" or \"Cold\" with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified and directed. |
| 22 | S & F in repairplastic water closet seat cover white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete all as specified and directed. |
| 23 | S & F in repairs looking mirror 600x450mm bevelled edge 5.5mm thick selected quality glass, mounted on 6mm thick commercial ply, aluminium frame around and fixed to wooden plug with CP brass screws and cup washeres complete all as specified and directed. |
| 24 | S & F in repair 15mm bore fancy typebib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 25 | S & F in repair 15mm bore chromium plated stop valve/ angle valve cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 26 | S & F In repair 15mm nominal internal bore PVC connection 450mm long with two brass nuts and PVC washer complete all as specified and directed. |
| 27 | S & F in repair 10 ltr capacity PVC low level flushing cistern including PVC syphon and float valve withPVC long band for out let connection of cistern with WC complete fixing the cistern with wall in pressured connecting with WC complete all as specified and directed |
| 28 | S & F in repairs MS grating CP 100mm dia, with hole/without for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as directed. |
| 29 | S&F in repairs PVC tank lid/coversintex water storage tank lid cover (cylindrical) for 500/1000 ltrs capacity tanks with GI sheet or nails on top of cover for monkey prevent, complete all as specified and directed. |
| 30 | S & F in repair 15mm chromium plated brass heath faucet or Jet with all fittings for water closet complete all as specified and directed. |
| 31 | Dismantaling ceiling boards (fiber, pulp, insulated any thickness including cover fillets) complete all as specified and directed. |
| 32 | M & L for false ceiling made out of E-board classic of size 600 x 600 x 4 mm thick, GI frame consisting of main Tee of size 38.50 x 24.00 mm and cross Tee of size 28.50 x 24.00 mm thick made out of PGI sheet 0.30 mm thick doubled at web and single at flange, flange covered with poder coated sheet 0.25 mm thick and angle 24.00 x 24.00 x0.4 mm thick powder coated suspended with GI wire 3 mm dia and up to 2 Mtrs long complete including plugging fixing of angle to brick walls with steel rawl plugs @ 450 mm c/c complete all as specified and directed. |
| 33 | S & F in repair 32 mm dia PVC waste pipe for WHB90 cm long with union, complete all as specified and directed. |
| 34 | Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 35 | Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 36 | S & F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified and directed. |
| 37 | S & F steel tubing medium grade 20mm bore Medium grade fix to wall/floor fixed complete complete all as specified and directed. |
| 38 | S & F in repair for PVC Cabinet looking mirror size 600x450x5mm selected quality fixed with brass screw and cup washer complete all as specified and directed. |
| 39 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specifed and directed. |
| 40 | S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sq. m in each pane complete all as specified and directed. |
| 41 | M & L for 18 /19 mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 42 | M & L for preparation of new surface of wooden surface and applying two coats of synthetic enamel paint over one coat pink primer complete all as specifed and directed. |
| 43 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n.exceeding 1.50 Sqm complete all as specified and directed. |
| 44 | S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification and drawing complete all as specified and directed. |
| 45 | S & F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails .MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail ,bottom rail and lock rail, Paneling of rudraksha colour PVC sheet to be fitted in MS frame welded with and including stainless steel hinges 100mm medium weight complete all as specified and directed. |
| 46 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4.00 Sq m each, complete all as specified and directed. |
| 47 | S & F for 35mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and directed. |
| 48 | S & F Aluminium anodized barrel tower bolts of extruded section, 200 mm long, complete all as specified and directed. |
| 49 | S & F Aluminium handles, cast type, anodized, 150 mm size, complete all as specified and directed. |
| 50 | S & F for 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 51 | S & F in repair Aluminium anodized barrel tower bolts of extruded section, 200 mm long, complete all as specified and directed. |
| 52 | S & F Aluminium anodized barrel tower bolts of extruded section, 150 mm long, complete all as specified and directed. |
| 53 | S & F Aluminium handles, cast type, anodized, 125 mm size, complete all as specified and directed. |
| 54 | S & F in repair Aluminium handles, cast type, anodized, 150 mm size, complete all as specified and directed. |
| 55 | S & F in repair for 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed , complete all as specified and directed. |
| 56 | S & F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 57 | S & F in repair for aluminium door closer hydraulically regulated designation No 1 unversal type suitable for door shutters up to 700mm in width and of weight not more than 35 Kg complete all as specified and directed. |
| 58 | Taking down and refixing of shutter of any description exc 2 sqm each complete all as specified and directed. |
| 59 | S & F in repair 30mm width of flaps Continous (Piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 60 | S & F in repair for 40mm dia cupboard knobs fixed with nut, screws and washer of wooden finish brass polished complete all as specified and directed. |
| 61 | S & F in repair drapery rod 30mm dia Aluminum fancy type powder coated wood finish including rings, knobs and brackets complete all as specified and directed. |
| 62 | S & F mild steel framed work as in grills, gratings etc with ends of bars shouldered and riveted or forged into spikes, framed guard bars, barred iron doors etc, conforming to Fe-290, Gde-E-165 complete all as specified and directed. |
| 63 | Dismantling floor, hearth or wall tiling including removing of cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish complete all as specified and directed. |
| 64 | M & L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar (1:6), complete all as specified and directed. |
| 65 | M & Lfor virified ceramic tiles 10mm thick (Square/rectangular) polished area of each tiles not exceeding 0.36 Sqm, in floors etc. set and joint in neat cenent slurry and pointed in white or coloured cement match complete all as specified and directed. |
| 66 | S & F Coloured non skid ceramic tiles 7 to 8mm thick (square/rectanglar) area of each tile exc 0.18 sqm but n exc 0.36sqm ,in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match,laid over 15mm thick bedding layer of cement mortar (1:4) complete all as specified and directed. |
| 67 | S & F Coloured non skid ceramic tiles 7 to 8mm thick (square/rectanglar) area of each tile exc 0.11 sqm but n exc 0.18 sqm ,in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match,laid over 15mm thick bedding layer of cement mortar (1:4) complete all as specified and directed. |
| 68 | S & F ceramic glazedcolured/ design tile in vertical surfaces 450x300x7mm thick on vertical surfaces such as dado and skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over 10 mm thick plaster in cement mortar (1:4) complete all as specified and directed. |
| 69 | M & L for 25 mm thick plain cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 70 | S & F in repair 15mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 71 | S & F in repair CP mixer for mixing hot & cold water for wash hand basin single lever complete all as specified and directed . |
| 72 | S & F in repair CP wall mixer for mixing hot & cold water complete all as specified and directed. |
| 73 | S & F in repair CP mixer for mixing hot & cold water for kitchen sink single lever complete all as specified and directed |
| 74 | S & F in repair brass legfor wall mixture and basin mixture of any description etc, complete all as specified and directed. |
| 75 | S & F in repair20 mm Ball brass valves, high pressure, with polythene float and fly- nut complete, scre-wed for iron pipe or brass ferrule and fixedcomplete all as specified and directed. |
| 76 | S & F in repair 15 mm Ball brass valves, high pressure, with polythene float and fly- nut complete, scre-wed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 77 | S & F in repair glass shelf size 300mm complete all as specified and directed. |
| 78 | S & F in repair corner glass shelf with CP railing complete all as specified and directed. |
| 79 | S & F in repair rectagular galss shelf with CP railing complete all as specified and directed. |
| 80 | S & F in repair towel ring round complete all as specified and directed. |
| 81 | S & F in repair toilet Roll ring holder complete all as specified and directed. |
| 82 | S & F in repair one piece coloured EWC concealed P or S trap complete all as specified and directed. |
| 83 | M & L for cleaning of septic tanks (any capacity) by dewatering sludge water and removing sludge/waste material etc. to a distance n. exc 50 M and burrying in pits and re-filling the same complete all as specified and directed. Note: The cost for excavation and earth work for pits is deemed to be included in the unit rate. |
| 84 | M & L dewatering of soak well by pumping or any suitable means dia of soak welln. exc 3.00 m and depth not exc 3.00 m complete all as specified and directed. |
| 85 | M & L for cleaning of manholes n. exc 1.5 m deep and removing sludge / waste materials etc to a distance n. exc 50 m andburrying in pits and re-filling the same complete all as specified and as directed.Note: The cost for excavation and earth work for pits is deemed to be included in the unit rate. |
| 86 | Cleaning of chocked any bore sewage line of any description and any size by rodding with green bamboo stick/cane stick and well flushing with water complete all as specified and directed. |
| 87 | Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 88 | Demolition and breaking up of sewage line (SGSW pipes)150mm dia set in cement mortar complete all as specified and directed. |
| 89 | Returning, filling in, including spreadiing, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed. |
| 90 | Removing excavated surplus soils not exceeding 50m and depositing where directed at a level not exceeding 1.5m abovethe starting point as in soilscomplete all as specified and directed. |
| 91 | M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone agg) as in bed to pipe including packing under and huching against the sides of pipes after they are laid and tested for 150 mm dia dia pipe complete all as specified and directed. |
| 92 | M & L for DWC (Double wall coruggated) HDPE pipes of size 150mm (ID) confirming to IS 16098 Part-II of strength/stiffness class SN 8 laid in trenches on concrete bed to level/gadient, jointing as per manufacturers instructions including jointing accessories as required complete all as specified and directed. |
| 93 | M & L for plain Cement concrete (1:4:8), type D-2, (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 94 | Supply only WPC complete all as specified and directed. |
| 95 | M & L for rendering 12mm thick cement plaster in cement mortar (1:4) and finished surfaces even and fair without using extra cement on wall complete all as specifiedcomplete all as specified and directed. |
| 96 | Demolition of RCC manhole/drain manhole/drain cover of any description and size complete all as specified and directed. |
| 97 | M & L for precast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in manhole covers, set in cement mortar (1:6) complete all as specified and directed. |
| 98 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 99 | M & L for Plain cement concrete (1:3:6) type C-2 (using 20 mm graded stone aggregate) as in surface channel, drain and manholes complete all as specified and directed. |
| 100 | M & L for Cutting into existing manhole for connecting new drains, manking good to pipe and rendering, cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in PCC (1:2:4) type B-1 smooth finished 150mm dia & upto 300mm dia complete all as specified and directed. |
| 101 | S & F mild steel deformed bars 10mm dia & over cut to length bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 102 | All as per Item No 101.00 here-in-above but of size 6 to 8mm dia complete all as specified and directed. |
| 103 | M & L for hardcore broken bricks or stones of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 104 | M & L forRCC M-20(using 20mm graded crushed stone aggregate) as in manhole covers, septic tank or soakage well cover slabs complete all as specified and directed. |
| 105 | M & L for Form work to soffits of suspended slab such as roof slabs,floor slabs,landings and similar work not exc 200mm thick flat fair finished surface to concrete complete all as specified and directed. |
| 106 | M & L for PCC ( 1:3:6) type C-2 (using 40 mm graded stone aggregate) as in lean concrete in foundation& mass concrete complete all as specified and directed. |
| 107 | Demolition and breaking up drain pipesand fittings of internal dia 75 to 100 mm and under (CI, PVC, AC etc ) set in cement mortar complete all as specified and directed. |
| 108 | S & F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 109 | S & F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 110 | S & F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 111 | S & F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 112 | S & F 75mmPVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 113 | S & F 75 mmPVC (SWR) bends any radius including jointing with solvent cementcomplete all as specified and directed. |
| 114 | S & F 110mmPVC (SWR) bends with acess door any radius including jointing with solvent cement complete all as specified and directed. |
| 115 | S & F 75 mmPVC (SWR) bends with acess door any radius including jointing with solvent cement complete all as specified and directed. |
| 116 | S & F 110mmPVC (SWR) junction single,(Single T) equal or unequal including jointing with solvent cement complete all as specified and directed. |
| 117 | S & F 75mm PVC (SWR) junction single, (Single T) equal or unequal including jointing with solvent cement complete all as specified and directed. |
| 118 | S & F 110mmPVC (SWR) junction single,(Single T) equal or unequal with acess door including jointing with solvent cement complete all as specified and directed. |
| 119 | S & F 75mm PVC (SWR) junction single, (Single T) equal or unequal with acess door including jointing with solvent cement complete all as specified and directed. |
| 120 | M & L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cementcomplete all as specified and directed. |
| 121 | M & L for PVC (SWR) vent cowl 75 mm dia complete all as specified and as directed. |
| 122 | M & L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified anddirected. |
| 123 | M & L for Cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregates) as in lintels upto 1.5m clear span, copings, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 124 | M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, quality confirming to Fe 410 -W (Gde- E- 250) quality-complete all as specified and directed. |
| 125 | S & F framed work such as grill, gratings etc with end of bars shoulders and/or riveted, or forget into spikes, framed guaged bared iron door, ladders, framed balusters, walk ways, railing, frame work of water tanks, man holes cover frame and similar works conforming to Fe-410-0 or Fe 310-0 complete all as specified and directed. |
| 126 | Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed. |
| 127 | Taking down / dismantling of barbed wire in fencing, any type complete all as specified and directed. |
| 128 | S & F in repairs for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed. Note: Each line wire to be measured. |
| 129 | Fixing only for Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as spcified and directed.Note: Each line wire to be measured. |
| 130 | Taking down / dismantling concertina coil wire in fencing, any type complete all as specified and directed. |
| 131 | S & F punched tape concertina coil of 600mm coil space of one round to another including binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 132 | S & F 0.8 mm thick PPGI sheet in wall cladiing and similar works, cut to size, drill holes punched, including round head screw, fastener,cleats, pintles etc, rivets and fix for covering crumple joints complete all as specified and directed. |
| 133 | M & L for PCC in (1:2:4) type-B-2 (using 40 mm graded stone aggregate) as in mass filling, road filling, plinth protection etc complete all as specified and directed. |
| 134 | M & L for cleaning gully trap, floor trap, P/S trap, kitchen trap etc., clearing blockage upto first manhole using appropriate tools and removing any debris from site complete all as specified and directed. |
| 135 | M & L for providing and laying 60mm thick factorymade chamfered edge cement concrete paverblock of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & patternover and including 50mm thick compactedbed of fine sand, compacting and properembedding/ laying of inter locking paverblocks into the sand bedding layer throughvibratory compaction by using platevibrator, filling the joints with sand andcutting of paver blocks as per required sizeand pattern, finishing and sweeping complete all as specified and directed. |
