|
| 1 | Disconnecting existing water tank of capacity exc. 250 ltr but not exc. 500 ltr, setting aside (or lowering of required) for repairs to roofs etc. and hoisting if required reconnecting and refixing in position on roof complete all as specified and directed. |
| 2 | Disconnecting existing water tank of capacity exc. 500 ltr but not exc. 1000 ltr, setting aside (or lowering of required) for repairs to roofs etc. and hoisting if required reconnecting and refixing in position on roof complete all as specified and directed. |
| 3 | Dismantling water tank capacity exc. 500 ltr but n.exc. 1000 ltr complete all as specified and directed. |
| 4 | Dismantling water tank capacity exc. 250 ltr but n.exc. 500 ltr complete all as specified and directed. |
| 5 | S&F in position rotational moulded polyethylene water storage tanks 1000 lts capacity (cylinderical verticalwith closed top) hoisted and fixed in position incl GI/CPVC tank nipple all as specified in SSR Part I complete all as directed |
| 6 | S&F in position rotational moulded polyethylene water storage tanks 500 lts capacity (cylinderical verticalwith closed top) hoisted and fixed in position incl GI/CPVC tank nipple all as specified in SSR Part I complete all as directed |
| 7 | Taking up or down existing GI tubing and connections and refixing old steel tubing and connections in new or old position(walls, ceiling, floors, etc.) for 20 mm dia pipes with and including all new fittings including making good the disturbed surface complete all as specified and directed. |
| 8 | Taking up or down existing GI tubing and connections and refixing old steel tubing and connections in new or old position(walls, ceiling, floors, etc.) for 25 mm dia pipes with and including all new fittings including making good the disturbed surface complete all as specified and directed. |
| 9 | Supply, fixing, laying & testing CPVC pipes 20 mm outer dia SDR 11 including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorsincluding taking down existing pipe complete all as specified and directed. |
| 10 | Supply, fixing, laying & testing CPVC pipes 25 mm outer dia SDR 11 including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorsincluding taking down existing pipe complete all as specified and directed. |
| 11 | S&F in repair 20mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 12 | S&F in repair 25 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 13 | Taking down existing chajja of angle iron with CGI/Galvalum sheet of size 1.80 m x 1.00 m and refixing the same with stainless steel nut, bolt, washer and plate and filling the holes with PCC 1:2:4 Type B-0 (using 12.5 mm graded stone aggregate) or cement mortar 1:3 complete all as specified and directed. |
| 14 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 15 | Dismantiling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed. |
| 16 | S&F rolled mild steel in roof trusses(framed), trussed purlins, crane gantries, rails and fastenings, MS pipe for post and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde-E- 250) quality-A complete all as specified and directed. |
| 17 | Dismantling of plain or corrugated steel sheeting, any gauge, thickess including Nainital or similar pattern roofs covering complete all as specified and directed. |
| 18 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 19 | S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, ridge, hip and vally gutters, fixed with self tapping screws as specified complete all as specified and directed. |
| 20 | M&L for preparation of old surface of wall etc. brooming down or steel wire brushing, scrapping down with steel scrapper, smoke, soot, moulds, moss and efflorescent salts, oil and greasy spots etc. and making proper surface by applying ready mix putty wherever required and applying one coat of oil bound distemper complete all as manufacturers instruction and as directed |
| 21 | M&L complete removal of existing treatment of wall, preparation of old surfaces and applying two coats of oil bound distemper one coat of alkali resistant primer complete all as specified and directed. |
| 22 | Dismantling boarding, any description, fixed in any position with screws complete all as specified and directed. |
| 23 | S&F 18 mm thick celuka PVC sheet minimum 600 KLgbm density grade-I quality of both side plain white colour regidiam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom inside the cabinet including drawer channels two No. in each drawer, magnetic ball catcher and all other fittings complete all as specified and directed.Note:- (i) Quoted rates shall deem to include fixing of cabinet on wall with appropriate rawl plug/dash through fastner type).(ii) Fabrication and installation of cabinet to be carried out by authorized vender of manufacturer only. |
| 24 | S&F 12 mm thick celuka PVC sheet minimum 600 KLgbm density grade-I quality of both side plain white colour regidiam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet shutters, sides, top and bottom inside the cabinet including drawer channels two No. in each drawer, magnetic ball catcher and all other fittings complete all as specified and directed.Note:- (i) Quoted rates shall deem to include fixing of cabinet on wall with appropriate rawl plug/dash through fastner type).(ii) Fabrication and installation of cabinet to be carried out by authorized vender of manufacturer only. |
| 25 | Taking down existing roof treatment of any type, cleaning of roof top by brooming down with wire brush scrapping down with steel scrapper and roughening surfaces of old roof and washing down with water to remove dust etc. complete all as directed.NOTE:- Debris shall be removed outside Defence land without any extra cost to the Govt. complete all as directed. |
| 26 | Filling and reinstating of separation cracks: Opening the separation cracks at the junction of RCC and masonry where ever directed and instructed into \"V\" Grooves 2 to 3\" from either side of the cracks by carefully marking areas to be opened up using a cutting machine and skillfully/carefully chiseling with a well sharpened chisel and hammer as directed including wire brushing and washing of concrete substrata and masonry walls with water jet to the surfaces thus prepared to the entire satisfaction of the consultant as instructed and directed. Moistening the cracks, provinding and applyin priming/bonding coat of slurry made out of \"Polyalk EP\" and cement (or equivalent as specified in the list of brand names) in proporiton 1:1 to surfaces prepared as instructed and directed. Filling the cracks/grooves by providing and applying \"Polyalk EP\" Polymer modified cement mortar (or equivalent as specified in the list of brand names) in proporiton 1:5:15 (Polyalk EP: Cement: Graded Sand/Quartz Sand) on the prepared surfaces and finishing it in the level with the existing plaster including hand packing, curing and making the surface similar to the external plastering using wooden floats/punch etc. complete all as specified and directed. |
| 27 | M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in as in padding over roof for levelling/making proper slope mixed with liquid water proofing compound as per manufacture instructions including necessary form work complete all as specified and directed.NOTE:- Water proofing compound shall be measured and paid seperately |
| 28 | M&L for rendering/screeding 10 mm thick on roof slab in cement mortar 1:3 mixed with liquid WPC @ 200 ml per bag of cement finished fair and even complete all as specified and directed.Note:- WPC shall be measured and paid separately |
| 29 | Supply only liquid water proofing compound |
| 30 | M&L for laying water proofing treatment using 4 mm thick APP modified membrane consisting five layers membrances with features as specified weighing not less than 3.50 kg per sqm reinforced with non woven polyester fiber @ 160 gm/Sqm laid over a coat of cold applied bituminous primer @ 0.40 kg/sqm by torching the membrance and sealing the over lap by 100 mm length side and 150 mm width side all as per manufacturer instructions including joints and changes in direction be curved with cement mortar 1:3 mixed with SBR latex @ 200 ml/bag of cement curved well before laying membrance and applying two finishing coats of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm (each coat) complete all as specified and directedNote: (i) Irrespective of lap the net covered area will only be measured for payment. (ii) Rate is inclusive of APP membrane, SBR Latex, primer, aluminium paint etc. |
| 31 | Supplying and applying High build elastomeric waterproofing coating based on pure, hydrophobic polyurethane, cold applied of spray / brush applied, membrane with an elongation of 550% and tensile strength of 2.5 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, no leakage upto 7 bars of water pressure as per DIN 1048, shore A Hardness of min. 45 as per ASTM D 2240. The system includes final base preparation, water based primer and applying SmartCare PU Magnum or approved equivalent in two to three coats to achieve a min. thickness of 1.2 mm, etc. complete as per Manufacturere specifications and as directed. |
| 32 | Providing and fixing 8 mm thick laminated wooden flooring (Endura series of Action Tesa or equivalent make as mentioned in list of makes) in approved shade and pattern, comprising multi-layer planks with abrasion -resistant melamine wear layer, decorative paper layer, high density fibreboard (HDF) core, and balancing backing layer having click-lock joint system (floating type) with minimum AC3 abrasion class suitable for residential and medium commercial use, Flooring to conform to IS 2046:1995 and IS 5389, panels laid over and including on 2 mm thick foam underlay over a clean, level and dry subfloor. Expansion gaps (10-12) to be provided along walls and fixed members neatly finished with matching skirting/beading and fixing skirting/beading of matching laminate finish to wooding flooring 18-25 mm thick, fixed with approved adhesive and/or screw to cover expansion joints and provide neat finishing along wall edges complete all as specified and directed. |
| 33 | Providing and fixing skirting/beading of matching laminate finish to wooden flooring, 18–25 mm wide and 8–10 mm thick, fixed with approved adhesive and/or screws to cover expansion joints and provide neat finishing along wall edges complete all as specified and directed. |
| 34 | S&F in repair after taking down damaged PVC tank covers, MS tank cover fabricated from 0.56 mm thick MS sheet with suitable frame for PVC water tank (circular top cover) of any capacity, with side opening and locking arrangement Includes MS hasp & staple (75 mm), MS hinges (50 mm), and all required fittings/accessories. Cover to be fixed with sufficient number of 50 mm long MS nails and provided with snap edge for monkey-proofing, finished with one coat of red oxide primer and two coats of synthetic enamel paint complete all as specified and directed. |
| 35 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed. |
| 36 | S&F mild steel framed work as in grills, grating etc. with end of bars shouldered and/or riveted, or forged into spikes: frame guard bars: barred iron doors: ladders: frame balusters: walk ways: railing: frame work of water tanks and similar works confirming to Fe- 290.Gde-E-165 complete all as specified and directed . |
| 37 | S&F mild steel work as in hand rails half round or other stock section or core for wooden hand rail straight portion drilled and counter sunk for balusters running bars for doors, balusters, nosing to steps including embeding in concrete and security etc., wind ties for roof including securing bolts, post and strut in fencing including cutting tops to shape as directed drilling holes, notching for wire etc. flat iron fillets securing wire mesh including all necessary drilling and bolting and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed. |
| 38 | M&L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying anti corrosive paint over a coat of anticorrosive primer all as specified and directed. |
| 39 | M&L for complete removal of exisitng paint on steel surfaces exceeding 10 cm width or girth and applying two coats of anti corrosive paint over a coat of anticorrosive primer all as specified and directed. |
| 40 | S&F in repair CP wall mixer, for mixing hot and cold water fancy type cast copperalloy, with capstan heads, chromium plated, screwed down for 15 mm bore pipe, high pressure with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 41 | S & F in repair stop valve/angle valve 15 mm nominal bore cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. |
| 42 | S&F in repair long body bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule orto GI socket complete all as specified and directed. |
| 43 | S&F in repair pillar taps, long nose, cast copper alloy, with capston heads, fancytype, chromium plated, screwed down high pressure with or without lettered \"Hot\" or \"cold\" with long screwed shanks and flynuts screwed for 15 mm bore iron pipe and fixed complete all as specified and directed. |
| 44 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 45 | S&F in repair chromium plated brass shower roses 125mm dia with or without swival joints, including fixing to 15 mm dia pipe or union all as specified. |
| 46 | S&F in repair 20 mm dia brass chromium plated tubular towel rail, D type, 60 cm long between flanges fixed with rawl plug completeall as specified and directed. |
| 47 | S&F in repair toilet paper holder, CP box type fixed to wall with chromium plated brass screws and rawl plugs complete all as specified and directed. |
| 48 | S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet,integral foot rest and providing lime concrete bedding and connecting to flusing cistern complete all as specified and directed. |
| 49 | S&F in repair plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 50 | S&F in repair 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets complete all as specified and directed |
| 51 | S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed. |
| 52 | S&F in repair vitreous china wash hand basin, white,flat back 550 x 400 mm excluding tap but including brackets 2 numbers including cutting for and pinning in ends of brackets, 32 mm CP brass waste coupling and waste pipe with long screwed shanks and fly-nuts, flange end bedded in red lead cement complete all as specified and directed. |
| 53 | S&F in repair Viterous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 54 | Removing building materials by truck or tractor with using of if necessary JCB machine and trolly load min 3.00 Cum each load for upto 10.00 km including loading, unloading and stacking at the destination and depositing out side defence land complete all as specified and directed. |
| 55 | Taking down shutters of any descriptionnot exc. 1 sqm each and refixing in same opening after easing and adjusting including refixing builders hardware as required and renewal of screws etc. complete all as specified and directed |
| 56 | Taking down shutters of any descriptionexc 1 sqm & n. exc 2 sqmeach and refixing in same opening after easing and adjusting including refixing builders hardware as required and renewal of screws etc. complete all as specified and directed |
| 57 | Taking down cement or cement lime plaster on walls/ concrete/roof slab any description including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 58 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surface/ block masonary in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 59 | M&L for preparation of new surface of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed. |
| 60 | M&L for preparation of old surface of ceiling etc. brooming down or steel wire brushing, scrapping down with steel scrapper, smoke, soot, moulds, moss and efflorescent salts, oil and greasy spots etc. and making proper surface by applying ready mix putty wherever required and applying one coat of oil bound distemper complete all as manufacturers instruction and as directed |
| 61 | M&L complete removal of existing treatment of ceiling incl preparation of old surfaces and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and directed. |
