|
| 1 | TRADE PATTERN FURNITURE (TP) : Sofa Set 3 Seater of size Width : 181cm, Depth : 80cm, Height : 85cm, Seating Height : 42.5cm Upholstery: Material synthetic leather & shade as approved of Model Supreme 3 Seater Sofa.Make : Godrej or equivalent in Featherlite / Durian |
| 2 | Sofa Single Seater of size Width : 87.5cm, Depth : 80cm, Height : 85cm, Seating Height : 42.5cm Upholstery: Material synthetic leather & shade as approved of Model Supreme single seater sofa.Make : Godrej or equivalent in Featherlite / Durian |
| 3 | Chair Revolving Executive /High Back with head rest with mesh at back side and arm rest should be heigh adjustable.Height adjustment should be provided in Aluminum structure of armrest which should be connected to Aluminum Back spine and should be operated by button. The depth adjustment should be provided in pad which should be fixed to armrest structure. Armrest Top should be made up of PU molded over plastic inner. The support spine should be made up of high pressure die cast polished hed aluminium.The adjustable tilting mechanism should bedesigned with 360° revolving type, 5 position locking, lumbar support tilting tension adjustment. The pedestal should be High Pressure Die cast polishedAluminum and fitted with 5 nos. twin wheel castors. The Neckrest should befixed to Back assembly through Neckrest spine.Color as approved of Model ACE chair with head rest. Make : Godrej or equivalent in Featherlite / Durian |
| 4 | Centre / Coffee Table of size W x D x H - 1202 x 594 x 411mm.All panels are made of 18mm Prelaminated Particle Board, with all exposed edges having 2mm thick PVC edge banding. Middle horizontal panel provides storage area. Four nylon bushes are provided.The top surface should be made of glass & PLT panel. 8mm thick toughened glass with UV plate glued on it. This glass is fixed with the side vertical panels. PLT top panel is hinged with side vertical panels to open upwards. Finishing should be in WENGE shade having SUEDE finish. UV guled plates under glass have SUNRAY finish.Hardware should be like Dowels for knockdown assembly with high quality standard hardware like screw, door hinges, bumpers, expanding sockets, nylon bushes etc.Color as approved of Model ALICE of Make : Godrej or equivalent in Featherlite / Durian |
| 5 | Chair Revolving Medium Back should be made up of 1.2 ± 0.1cm thk. hot pressed plywood measured.The Back is made up of injection mou1ded glass filled nylon & upholstered using Mesh fabric with high tenacity yarn.* SEAT SIZE : 47.0 cm. (W) x 51.5 cm (D) * BACK SIZE : 45.0 cm. (W) x 65.3 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and hardness 16 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following features : • Up-Down adjustment- 8 steps (8 0±0.Scm range) • Height adjustable armrest structure which is Powder Coated & fitted with an armrest top.• Fixed Armrest Top is PU moulded over metal insert.LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric.The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pa6. Lumbar pad has an adjustment of 8.0 ± 0.5 cm in height.FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designedwith the following features. • 360° revolving type. • Single point control.• Front-pivot for tilt with feet resting on ground ensuring more comfort. • Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2.PNEUMATIC HEiGHT ADJUSTMENT. The pneumatic height adjustment has an adjustment stroke oi 10.0 ± 0.3 cn°. Pedestal Assembly : the pedestal is injection moulded in black 30% glass filled nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch center dia is 66.1± 0.5 cm. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon.Color as approved of Model Pulse MB of Make : Godrej or equivalent in Featherlite / Durian |
| 6 | Chair Visitor should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK SIZE: 47.7 cm. (W) x 60.1 cm. (D) Visitor TUBULAR FRAME: The tubular frame should be cantilever type and made of Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202 tube. The back should be connected to frame through chrome plated high pressure die case connector piece. Overall Dimensions of Chair Seat Height -44.8cm Height -98.2cm. Width & Depth of Chair as measured from base - Width-60.9 cm and Depth-64.2 cm. Color as approved of Model Marvel Visitor of Make : Godrej or equivalent in Featherlite / Durian |
| 7 | Side Rack with Trays : Providing, placing and supplying of storage: Overall Dimensions of VSDU - 5 shall be 900mm(W)x450mm(D)x1168.5mm(H). The top shall be Metal top (1 mm add in unit height ) . The Rigid Knock Down Construction , Back , Sides and Door shall be made from 0.7 mm high yield strength CRCA ,rest in 0.8 mm CRCA . CRCA - \"D\" Grade as per IS-513 . Sliding door arrangement shall have sliding door wth top hanging arrangement to prevent derailment . Each door shall be provided with 2 plastic roller having steel ball bearing for smooth movement of door & less noise . Locking shall be 5 lever cam lock for safe locking . Handle shall be plastic flush & recessed handle . Shelving shall have Height wise adjustable shelf mounting . Uniformly Distributed Load Capacity of the shelf is 40 Kg maximum . VSDU - 5 shall have 2 no. of adjustable full shelves . Accessories optional shall be cradle with pipes for hanging godrej instadex files . Leveler shall be screw type leveler with hex plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns . For VSDU 5 - A4 size box file can be stored vertically on two shelves and clear space above third shelf is 295 mm. Color as approved of Model VSDU-5 of Make : Godrej or equivalent in Featherlite / Durian. |
| 8 | Sofa Set 2 Seater with Cushions :Providing, placing and supplying of sofa: Dimensions W x H x D (cm)- 132 x 83 x 86 Finish Color- Black Seat Height (cm)- 45 Primary Material- Pinewood Delivery Condition- Knock Down Upholstery Material- Synthetic Leather Warranty- 1 Year Warranty. Color as approved of Model PARTO PI 2 Seater Sofa of Make : Godrej or equivalent in Featherlite / Durian |
| 9 | Table Office Officer : Supplying and placing in position Main Table & ERU of the following specifications.1650x1650x750 Primary Work Surface:Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with0.4mm PVC membrane pressed on to top.Softclosing access flap with in-build power box are provided on work surface for wire management.Secondary Work Surface:Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Modesty Panel:Made of 25mm thick MDF one side pre- laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.understructure:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.integrated pedestal:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS 14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism.Handles are provided for ease of opening.Pedestal is provided with lock for security.Color as approved of Model ARISTO of Make : Godrej or equivalent in Featherlite / Durian |
| 10 | Table Office Clerk Steel Enterprise 1500 Table with CPU Hanger size shall be 1500 Width mm x 750 Depth mm x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) . Color as approved of Model Enterprise with CPU Hanger of Make : Godrej or equivalent in Featherlite / Durian Model |
| 11 | Table Computer should be having Material: Top 25 mm Melamine laminated Particle Board & rest 15 mm Paper laminated Particle board Hardware: Screw, KD Fittings, Slides , Magnetic Catch , Lock & Castors Construction: Knock down Load Bearing Capacity: 35 Kgs. Packets: 1 No. Finish: Melamine laminated Top & rest Paper lamination (Colour : Honey & Walnut) Dimensions: W 1015 X D 590 X H 750.Color as approved of Model Companion C13 of Make : Godrej or equivalent in Featherlite / Durian |
| 12 | Coffee Table Providing, placing and supplying of coffee table: Dimensions W x H x D (cm)-90 x 40 x 90 Material : 18 mm thk prelaminated particle board with 10 mm thick toughed glass Shade : Black Construction : Knock down Finish : 1) MIP lamination in Black ink shade with matching lipping in Matt finish 2) Digitally printed glass which is matching with PLT.Color as approved of Model Skyline of Make : Godrej or equivalent in Featherlite / Durian |
| 13 | Chair Revolving High Back should be SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather. Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D) BACK SIZE : 47.5 cm. (W) x 77 cm. (D) ARMRESTS: The armrest top should be moulded from polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism should be designed with the following features: • 360° revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Polypropylene. Overall Dimensions of Chair Seat Height -44.5 to 54.5 cm. Height -114.0-131.5 cm. Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm.Color as approved, Model :Lasede HB of Make : Godrej or equivalent in Featherlite / Durian |
| 14 | Display Unit / Back unit of the following specifications.Overall Dimension- 1200 x 520 x 1850. The top panel should be made of 36mm thk medium density fibre board as per IS:12406 with pigmented polyurethane coating on both sides. The side panel should be made of 18mm thk medium density fibre board as per IS:12406 with pigmented polyurethane coating on both sides. The display shelf panels should be made of 36mm thk medium density fibre board as per IS:12406 with pigmented polyurethane coating on both sides. The bottom panel should be made of 36mm thk medium density fibre board as per IS:12406 with pigmented polyurethane coating on both sides. Back and understructure panels should be made of 18mm thk medium density fibre board as per IS:12406 with pigmented polyurethane coating on both sides. LED strip lights should be provided beneath each shelf. Door panels should be made of 18mm thk medium density fibre board as per IS:12406 with pigmented polyurethane coating on both sides. Each door panel to be provided with Lock. The HDU shelf panels should be made of 18mm thk medium density fibre board as per IS:12406 with pigmented polyurethane coating on both sides.Color as approved, Model : Coeval of Make : Godrej or equivalent in Featherlite / Durian |
| 15 | Wardrobe Unit should be in position Flap Up Back unit of the following specifications.Overall Dimension- 1200 x 520 x 1850. The top panel should be made of 36mm thk medium density fibre board as per IS:12406 with pigmented polyurethane coating on both sides. The side panel should be made of 18mm thk medium density fibre board as per IS:12406 with pigmented polyurethane coating on both sides. The overhead storage panels should be made of 18mm thk medium density fibre board as per IS:12406 with pigmented polyurethane coating on both sides. The bottom panel should be made of 36mm thk medium density fibre board as per IS:12406 with pigmented polyurethane coating on both sides. The back and understructure panels should be made of 18mm thk medium density fibre board as per IS:12406 with pigmented polyurethane coating on both sides. A LED strip light to be provided beneath bottom panel of overhead storage. Color as approved, Model : Coeval of Make : Godrej or equivalent in Featherlite / Durian |
| 16 | Chair Visitor should be SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather. Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D) BACK SIZE : 46.5 cm. (W) x 59.5 cm. (D) Visitor TUBULAR FRAME: The tubular frame should be cantilever type and made of Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202 tube. The back should be connected to frame through chrome plated high pressure die case connector piece. Overall Dimensions of Chair Seat Height -46.2 cm. Height -98.2 cm. Width & Depth of Chair as measured from base - Width-60.9 cm and Depth-64.7 cm.Color as approved, Model : Lasede Visitor of Make : Godrej or equivalent in Featherlite / Durian |
