|
| 1 | COMMON ITEMS APPLICABLE FOR JOB \"A\", \"JOB \"B\" , JOB \"C\" & JOB \"D\" & JOB \"E\" (B/R & E/M) :- |
| 2 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft loose soil complete all as specified & directed. |
| 3 | M&L Hard core, broken stone/boulders to gauge n exc 63 mmcomplete all as specified & directed. |
| 4 | M&L for Precast cement concrete block masonry type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc 10cm in width and setting in cement mortar 1:6, complete in walls complete all as specified and directed. |
| 5 | M&L for Providing pre-cast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed)type C1, 1:3:6 ( 20 mm graded aggregate)and setting in mortar 1:4 , complete in walls complete all as specified and directed. |
| 6 | M&L for Rendering 15mm thick on fair faces of brick works or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for 100mm thick Cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) as in flooring, foot path, hard standing, plinth protection, bases of water tanks etc. complete all as specified and directed. |
| 8 | M&L for two coats of cement paint over a coat of primer and other surfaces with alkali resistant priming paint including preparation of new surfaces complete all as specified and directed. |
| 9 | M&L PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in coping,benching,apex stone, bed plates, kerbs etc and benching and the like including weathering slightly rounded or chamfered angle and throating & necessary form work complete all as specified and directed. |
| 10 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations. |
| 11 | M&L 75mm thick Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate)including finishing the surface even and fair complete all as specified and directed. |
| 12 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n.exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 13 | M&L for PCC type D2, 1:4:8 (Using 40 mm graded stone aggregate) as in foundation,filling and mass concrete etc complete all as specified and directed. |
| 14 | M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection, finished even and smooth w/o using extra cement complete all as specified and directed. |
| 15 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 16 | Supply and spread dry clean river sand in trenches for cable cushioning all as directed and specified.Note- Punned thickness of sand i.e 18 cm shall be considered for measurement purpose. |
| 17 | S&FMCB SP, 6-32 Amps, 230V, C- series with breaking capacity of 10KA complete all as specified & directed. |
| 18 | ITEMS APPLICABLE FOR JOB \"A\"(E/M) :- |
| 19 | Supply and installation of Flame ProofCooling & Dehumidification type hi wall split AC units indoor & outdoor complete with cordless control unit and 2 TR Power supply 1 phase 220VAC, 50 Hz Hazardous Zone Zone 1, I A, IIB T3 complete all as specified & directed. Notes: 1. FLP (Flameproof product) Certificate from CCOE(Chief controller of explosives/PESO(Petroelum and explosives safety organisation) for all Electrical JB , Motors and compressor Terminal shall be submitted..2. FLP Certificate from CIMFR (Central institute of mining and fuel research) For Motor shall be submitted.3.Rate shall be Including formasonary work and other charges etc |
| 20 | Supply and installation of Flame proof Voltage stabilizer for automatic operation, single phase naturally air cooled wall mounted, copper wound with digital display indoor type for AC & designed for input variation between 140 V to 250 V with output voltage stabilized at 230 V with accuracy of +3 % and of capacity 4 KVA Zone IIA IIB T3 complete all as specified & directed. |
| 21 | S&F Jointing and testing copper tubing with nominal diameter 1/4 inch of suitable thickness for liquid line to connect with outdoor unit complete all as specified and directed. |
| 22 | S&F Jointing and testing copper tubing with nominal diameter 3/8 inch of suitable thickness including expanded polythene for external insulation of suction line for connection with outdoor condensing unit complete all as specified and directed. |
| 23 | S&F PVC non metallic flexible pipe of size of 20mm dia alongwith fixing accessories such as saddles pipe hook etc for draining out the water from indoor unit complete all as specified and directed. |
| 24 | Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth and getting out in hard/dense soil for laying of cable trenches complete all as specified and directed. |
| 25 | Removal of surplus soil (excavated soil) to distance not exceeding 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 26 | Supply and laying precast cable cover protection for UG cables of size 250 x 150x 40 mm laid in trenches IS:5820-1970 complete all as specified and directed. |
| 27 | Supply and laying cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electronic power cables(heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 3.5 core complete all as specified and directed. |
| 28 | M&L for sub main wiring with two single core 4.00 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable and including heavy grade steel conduit 25 mm dia ISI marked with all steel accessories such as tee, bend, joint cover etc, screw, gutti/roul plugs PVC all as per site requirements including fixing on surface on stone walls / brick masonary walls /ceilings /floors etc with 4.00 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete all as specified and colour coding of cables such Phase- Red, Neutral -black, and Earth-Green complete all as specified and directed. Note-Two runs of 4.00 sqmm single core cable and one run of 4.00 sqmm earth wire including steel conduit shall be measured as one Running metre. |
| 29 | S&F Flame proof single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 32 Amps complete all as specified & directed. |
| 30 | S&F Sheet metal enclosure for DB\"s double door TPN 04 ways including MCCB 125 Amp to be used as incomer and outgoing as MCB single pole, deep drawn with 200 Amps rated copper bus bar 415 V, complete all as specified & directed. |
| 31 | S&F Sheet metal enclosure for DB\"s double door SPN, 8 ways when MCBs to be used single pole and neutral, deep drawn with 200 Amps rated copper bus bar 230 Volt, complete all as specified & directed. |
| 32 | M&L for Cutting hole into stone/brick masonry wall not exceeding 450mm thick, built in cement mortar, using stone drilling machine for inserting 65mm dia pipe including making good the disturbed surfaces complete all as specified and as directed |
| 33 | ITEMS APPLICABLE FOR JOB \"B\"(B/R & E/M) :- |
| 34 | Site clearance including clearing away all grass vegetation, saplings, shrubs, brushwood, under growth,and removing rubbish upto a distacne of 50 metres outside the periphery of the area complete all as specified and directed. |
| 35 | M&L for anti termite treatment treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 36 | M&L for anti termite treatment Treating the back fill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with back fill to be measured) complete all as specified and directed. |
| 37 | M&L for anti termite treatment treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed. |
| 38 | M&L for anti termite treatment treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 39 | Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc. complete all as specified & directed. |
| 40 | Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc. complete all as specified & directed. |
| 41 | Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc complete all as specified & directed. |
| 42 | Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings,chajjas and similar work; not excee ding 200mm thick (Horizontal or sloping) in chajjas; flat rough finished surfaces of concrete complete all as specified & directed. |
| 43 | M&L for Reinforced Cement Concrete type A1, 1:1.5:3 (using 20 mm graded stone aggregate) for foundations, footing, plinth beams, bases for columns etc complete all as specified & directed. |
| 44 | M&L for Reinforced cement concrete type A1, 1:1.5:3 ( using 20mm graded aggregate ) as in column, pillars, piers, posts and struts complete all as specified & directed. |
| 45 | M&L for Reinforced cement concrete type A1, 1:1.5:3 (using 20 mm graded stone aggregate) in beams, cantilevers, lintels over 1.5 m span.complete all as specified & directed. |
| 46 | M&L for Reinforced cement concretetype A1, 1:1.5:3 (using 20 mm graded stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed. |
| 47 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 48 | S&F Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 49 | M&L for 25 mm thick Damp Proof Course in cement concrete 1:2:4, Type B-0 to horizontal or vertyical surfaces including necessary formwork complete all as specified and directed. |
| 50 | M&L Moorum /red bajri filling in floors or pavings, laid in layers not exc 15 cm thick, spread, levelled and rammed including watering, complete all as specified and directed. |
| 51 | Spreading and levelling earth filling in floors in layers and well ramming including watering as required complete all as specified and directed. (soil obtained from item No 11.00) |
| 52 | M&L for 75 mm thick plain cement concrete 1:4:8 type D2 using 40mm graded aggregateas in sub base complete all as specified and directed. |
| 53 | M&L Non skid ceramic tiles Coloured 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exceeding 0.11 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed. |
| 54 | M&L Coloured Glazed Ceramic tiles 450 x 300 x 7-8/ 600 x 300 x 7-8mm thick on vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed. |
| 55 | M&L for Rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed. |
| 56 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smoothwithout using extra cement. including mixing of water proofing compound wherever required as per manufacturers instructions complete all as specified and directed.Note: WPC shall be measured & paid separately. |
| 57 | M&L for Rendering 5 mm thick in cement mortar 1:3 on ceiling on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 58 | Supply only liquid water proofing compound of approved quality complete all as specified and directed. |
| 59 | M&L for preparation of new plastered surface of wall and applyingtwo coats ofdistemper oil emulsion white or tinted through mechnical means over a coat of 1 mm thick wall care putty, complete all as specified and directed. |
| 60 | M&L preparation of newly plastered surfaces of walls and applyingthrough mechnical means two coat of Premium Acrylic Smooth exterior emulsion paint over and including priming coat of exterior primer complete all as specified and directed. |
| 61 | M&L for Preparing of new plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed. |
| 62 | M&L for Preparing old plastered wall surfaces and applying one coats of cement base paint through mechanical means complete all as specified and directed. |
| 63 | Complete removal of existing treatment of old plastered surfaces of walls and applying through mechanical means Two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 1 mm thickness plaster of paris putty to prepare the surface even and smooth as specified and directed. |
| 64 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 65 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts as reqd complete all as specified and directed. |
| 66 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts as reqd complete all as specified and directed. |
| 67 | M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 68 | S&F Powder coating (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 1.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed. |
| 69 | S&F Powder coating (minimum thickness of powder coating 50 micron) anodisedaluminium window and ventilator shutters, sliding /side hung type without sash bars, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mmlong (2 no.) suitable handle (1no.) complete all as specified and directed. Note : Sheet Glass and SS wiremesh shall be measured & paid separately |
| 70 | S&F 4.80mm thick plain sheet glass ordinary quality and glazing with EPDM rubber/ neoprene gasket etc complete all as specified and directed. |
| 71 | S&F 4.80 mm thickground or obscured or frosted sheet glass on one sideordinary quality etc complete all as specified and directed. |
| 72 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 73 | S&FSolid PVC Door Frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 74 | S&F Factory Made Solid PVC Moulded Door Shutter,with particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 75 | S&F 100mmmild steel butt hinges, medium weight, cold rolled complete all as specified and directed. |
| 76 | S&F 100 mm longExtruded brass handles, fabricated type polished complete all as specified and directed. |
| 77 | S&F 150 mm alluminium anodisedbarrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and directed. |
| 78 | S&F Toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 79 | S&FSheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 80 | S&F in repairs Corner Glass Shelf, Fancy Type complete all as specified and directed. |
| 81 | S&FSoap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 82 | S&F in repairs 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (minimum weight 455 gms) |
| 83 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as specified and directed. |
| 84 | Supplying and laying of 32mm CPVC pipes SDR 11 & PlainCPVC SDR 11 fittings on walls ,ceilings or laying in floors including all fittings complete all as specified and directed. |
| 85 | Supplying and laying of 25mm CPVC pipes SDR 11 & PlainCPVC SDR 11 fittings on walls ,ceilings or laying in floors including all fittings complete all as specified and directed. |
| 86 | Supplying and laying of 20mm CPVC pipes SDR 11 & PlainCPVC SDR 11 fittings on walls ,ceilings or laying in floors including all fittings complete all as specified and directed. |
| 87 | S&FAngle cock 15mm borefancy type chromium plated screwed down high pressure, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 88 | S&F 15mm fancy type long body bib taps long shank cast copper alloy with crutch or butterfly hadle secrwed for iron piper or for brass ferrule complete all as specified and directed. |
| 89 | S&F 15mm bore PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed. |
| 90 | S&F chromium pated shower rose 125mm size with or without swivel joints, any size including fixing to 15 mm bore steel pipe or union complete all as specified and directed. |
| 91 | S&F Towel rail 20mm dia chromium plated including 600mm longincluding brackets, screws and wooden/plastic cleats complete all as specified and directed. |
| 92 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including makingconnections and fixed in position complete all as specified and directed. |
| 93 | S&FVitreous chinawash down water closet (Pedestal pattern, ETWC), white including fixing bolts, 110mm PVC (SWR) \"P’ trap, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 94 | S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets Flush pipe of polyethylene of low or highdensity or PVC. 32 mm dia, for low level cistern complete all as specified and directed. |
| 95 | S&F Table topwash hand basin Vitreous china, light colour / white of size 565mmx420mmx140mm including brass chromium plated waste coupling, chain, plug, porcelain rubber stopper, brackets, 32mm bore PVC waste pipe of appropriate length ilcluding making necessary connections complete all as specified and directed. Make - Hindware/Cera/Neycer |
| 96 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls110mm bore complete all as specified and directed. |
| 97 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore complete all as specified and directed. |
| 98 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete all as specified and directed. |
| 99 | S&F PVC (SWR) floor trap 75mm dia outlet, plain/hole with grating including jointing with solvent cement complete all as specified and directed. |
| 100 | S&F PVC (SWR) bends any radius 110mmbore complete all as specified and directed. |
| 101 | S&F PVC (SWR) bends any radius with access doors 110mm bore complete all as specified and directed. |
| 102 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed. |
| 103 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement concrete complete all as specified and directed. |
| 104 | M&L for concealed point wiring with 1.5 sqmm PVC insulated,unsheathed, FRLS multistrandedcopper conductor 1100 volts grade cable in and including PVC rigid conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirementsincluding fixing inside stone walls / brick masonary walls surface /ceilings /floors etc anodized modular MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dollyfor mounting of modular switches/ sockets/regulator etc and 1.5 sqmm PVC insulated,unsheathed, FRLS multistrandedcopper conductor 1100 volts grade cableas continuous earth lead connected to common earth dolly andcolour coding of cables such as Phase- Red, Neutral-Black, and Earth-Greenand making good to disturbed surfaces/wall with plaster& matching with the existing colour of wall/floor etc complete all as specified & directed for the following :- Note- Cutting, Chasing,drilling in any type of wallfor fixing of concealed conduit and sunken boxes shall be includedin quoted rate. No extra payment shall be made for this. |
| 105 | One light point controlled by one single pole 5 Amps switch. |
| 106 | One ceiling fan point controlled by one single pole 5 Amps switch. |
| 107 | One exhaust fan point controlled by one single pole 5 Amps switch. |
| 108 | One 5 pin socket point 5 Amps on independent board. |
| 109 | One 5 pin socket point 5 Amps on same board with other switches. |
| 110 | M&L for concealed point wiring with 2.5 sqmm PVC insulated,unsheathed, FRLS multistrandedcopper conductor 1100 volts grade cable in and including PVC rigid conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirementsincluding fixing inside stone walls / brick masonary walls surface /ceilings /floors etc anodized modular MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dollyfor mounting of modular switches/ sockets/regulator etc and 2.5 sqmm PVC insulated,unsheathed, FRLS multistrandedcopper conductor 1100 volts grade cableas continuous earth lead connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Greenand making good to disturbed surfaces/wall with plaster& matching with the existing colour of wall/floor etc for One 15 Amp switch socket combination on independent board complete all as specified & directed. Note- Cutting, Chasing,drilling in any type of wallfor fixing of concealed conduit and sunken boxes shall be included in quoted rate. No extra payment shall be made for this. |
| 111 | S&F Modular switch , 1 Module single pole one way10 Amps complete all as specified & directed. |
| 112 | S&F Modular socket , 2 Module6 Amps, 5 pin, 230 volts AC complete all as specified & directed. |
| 113 | S&F Modular switch , 1 Module single pole one way16 Amps complete all as specified & directed. |
| 114 | S&F Modular socket , 2 Module6/16Amps, 6 pin, 230 volts AC complete all as specified & directed. |
| 115 | S&F Modular type fan regulator upto 120 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm complete all as specified & directed. |
| 116 | S&F PVC ceiling rose 65 x 50 mm surface type with 3 terminals 230 volt complete all as specified & directed. |
| 117 | S&F Modular white cover plate with frame, 3 module omplete all as specified & directed. |
| 118 | S&F Modular white cover plate with frame, 4 module omplete all as specified & directed. |
| 119 | S&F Modular white cover plate with frame, 6 module complete all as specified & directed. |
| 120 | S&F Modular metal flush box 3 module complete all as specified & directed. |
| 121 | S&F Modular metal flush box 4 module complete all as specified & directed. |
| 122 | S&F Modular metal flush box 6module omplete all as specified & directed. |
| 123 | S&F LED Light fitting, 4 feet1x20 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed. |
| 124 | S&F LED mirror Light fitting 2 feet, 10 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed. |
| 125 | S&F LED light fitting 9/ 10 Wattsbulk head Luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed. |
| 126 | S&F LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose includingbrackets made out of 50 mm dia light grade GI pipe 1.50 mtr long bent to shape and size as per site requirement for fixing ofstreet light fitting on poles/ walls including Flat Iron clamps=02 Nos of size 30x5mm made to shape incl nuts,bolts & washerscomplete all as specified & directed. |
| 127 | S&F Sheet metal enclosure for DB\"s double door SPN, 12 ways when MCBs to be used single pole and neutral, deep drawn with 200 Amps rated copper bus bar 230 Volt, complete all as specified & directed. |
| 128 | S&F testing and commissioning MCB SPN, 40 to 63 Amps, 230 V, C- series with breaking capacity of 10 KA complete all as specified & directed. |
| 129 | S&F Exhaust fan steel body AC single phase 230 V of size 380 mm sweep, 900 RPM with blades, and frame and louvers complete all as specified & directed. |
| 130 | S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, AC single phase 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified & directed. |
| 131 | M&L for concealed sub main wiring with two single core 2.5 sqmm PVC insulated ,unsheathed , FRLS multistrandedcopper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls /ceilings /floors etc with 2.5 sqmm PVC insulated,unsheathed, FRLS multistrandedcopper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster& matching with the existing colour of wall/floor etc complete all as specified.Notes- (i) Two runs of single core 2.5 sqmm cable and one run of 2.5 sqmm earth wire including PVC concealed Conduit together shall be measured as one unit.(ii) Cutting, Chasing,drilling in any type of wallfor fixing of concealed conduitfor sub main wiring shall be included in quoted rate. No extra payment shall be made for this. |
| 132 | M&L for concealed sub main wiring with two single core 6.0 sqmm PVC insulated ,unsheathed , FRLS multistrandedcopper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls /ceilings /floors etc with 6.0 sqmm PVC insulated,unsheathed, FRLS multistrandedcopper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster& matching with the existing colour of wall/floor etc complete all as specified & directed by Engineer-in-Charge.Notes- (i) Two runs of single core 2.5 sqmm cable and one run of 2.5 sqmm earth wire including PVC concealed Conduit together shall be measured as one unit. (ii) Cutting, Chasing,drilling in any type of wallfor fixing of concealed conduitfor sub main wiring shall be included in quoted rate. No extra payment shall be made for this. |
| 133 | M&L for Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron wire 4 mm dia as earth lead up to test point with suitable size GI nuts/bolts, washers,check nut and brazed properly up to main board,LT panel etc and adequate quantity of charcoal and salt 15 cm around the earth plate including earth pit in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates,40mm thick precast RCC cover in 1:2:4 reinforced with 8mm dia TMT bars 3 Nos both way including CI cover 10 mm thick with hingedand frame of angle iron 25x25x6mmwith 6mm dia MS bar handle made to shape, excavation and earth work in any type of soil and including medium grade GI watering pipe 20mm bore with funnel and wire mesh and medium grade GIprotection pipe 15 mm bore up to main board complete all as shown in electrical plate no 3 of MES schedule Part-I , connected to earthing testing point and testing on completion complete all as specified and directed.Notes: (i) The unit rate includes 15 mm dia GI pipe up to 7.5m for protection of earth lead. (ii) The unit rate includes galvanised iron wire 4 mm dia from earth electrode to test point up to 7.5 meter (iii) In case measured value of earth resistance of each earthingis recorded more than 3 ohms then the earthing shall be re done by the contractor without any extra cost to the department. |
| 134 | S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing 4 mm dia galvanised iron or steel wire complete all as specified & directed. |
| 135 | ITEMS APPLICABLE FOR JOB \"C\"(B/R) :- |
| 136 | M&L for coloured designed chequered cement concrete tiles of a size 400x400x25mm thick withwhitecement & pigment in floorsetc., set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. |
| 137 | ITEMS APPLICABLE FOR JOB \"D\"(B/R) :- |
| 138 | M&LPCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub base and foundation, fillings and mass concrete complete all as specified and directed . |
| 139 | M&L for coloured Chequered cement concrete tiles 30cmx30cm x 22-25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:6 complete all as specified & directed. |
| 140 | M&L for Prepolished coloured Machine pressed precast conctete interlocking paver block rubber moulded with gray cement and pigmentany shape and size confirming to IS 15658-2006 of 60 mm thickness, M-40 Grade laying oversand cushion all as specified and as directed . |
| 141 | ITEMS APPLICABLE FOR JOB \"E\"(B/R) :- |
| 142 | M&L for coloured Chequered cement concrete tiles 30cm x 30cm x 22-25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in cement mortar 1:6 complete all as specified & directed. |
| 143 | M&L Stone kerb of roughly squared stones of size 20cm x 30cm , dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush complete all as specified and dirceted. |
