|
| 1 | Taking down chowkhats or frames not exc 1.5 sqm with shutter (without taking of shutter from the frames) including taking out hold fasts and PCC bed block complete all as specified and as directed by Engr-in-charge. |
| 2 | Taking down chowkhats or frames exc 1.5 sqm but not exc 4 sqm with shutter (without taking of shutter from the frames) including taking out hold fasts and PCC bed block complete all as specified and as directed by Engr-in-charge. |
| 3 | Taking down shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and as directed by Engr-in-charge. |
| 4 | Demolition brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed by Engr-in-charge. |
| 5 | Taking down cement plaster on brick or stone walls etc., including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed by Engr-in-charge. |
| 6 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-charge. |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise specifically complete all as specified and as directed by Engr-in-charge. |
| 8 | Dismantling structural steel work of any description and any position including doors, gate but excluding framed trusses complete all as specified and as directed by Engr-in-charge. |
| 9 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store complete all as specified and as directed by Engr-in-charge. |
| 10 | Dismantling plain or corrugated steel sheeting any guage, thickness including roof covering etc., complete all as specified and as directed by Engr-in-charge. |
| 11 | Material and labour for plain cement concrete type B-1 1:2:4 (Using 20mm graded granite stone aggregate) in hold fasts and similar works complete all as specified and as directed by Engr-in-charge. |
| 12 | Supply and fix for pressed steel frames for doors size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed by Engr-in-charge. |
| 13 | Supply and fix for pressed steel frames for doors size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed by Engr-in-charge. |
| 14 | Material and labour for PCC 1:3:6 type C-1 (Using 20mm graded stone aggregate) as filled in pressed steel foor frames etc., complete all as specified and as directed by Engr-in-charge. |
| 15 | Supply and fix for factory made solid PVC door frame of size 50x47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube manufactured as per SSR Part-I complete all as specified and as directed by Engr-in-charge. |
| 16 | Supply and fix for factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, with particle board coresupplying and fixing in frame at site complete all as specified and as directed by Engr-in-charge. |
| 17 | Supply and fix for 35mm thick factory made second class hard wood plain framed panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commecrcial ply or 12mm veneered particle board with commercial veneering on both face. The size of rail and stile as per IS 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engr-in-charge. |
| 18 | Supply and fix for 35mm thick second class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc., size of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed by Engr-in-charge. |
| 19 | Supply and fix for 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides fixed to chowkats complete all as specified and as directed by Engr-in-charge. |
| 20 | Supply and fix for steel window /ventilator with side hung shutter including projecting type hinges with steel handles and steel peg stay and with glazing bars complete with dovetailed or welded complete all as specified and as directed by Engr-in-charge. |
| 21 | Supply and fix for steel window/ ventilator with side hung shutter including projecting type hinges with steel handles and steel peg stay and but without glazing bars suitable for fixing of gauze with dovetailed or welded complete all as specified and as directed by Engr-in-charge. |
| 22 | Supply and fix for 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and as directed by Engr-in-charge. |
| 23 | Supply and fix for alluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engr-in-charge. |
| 24 | Supply and fix for 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21 complete all as specified and as directed by Engr-in-charge. |
| 25 | Supply and fix for 75mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21 complete all as specified and as directed by Engr-in-charge. |
| 26 | Supply and fix for 150mm long aluminium handles, cast type, anodised complete all as specified and as directed by Engr-in-charge. |
| 27 | Supply and fix for 100mm long aluminium handles, cast type, anodised complete all as specified and as directed by Engr-in-charge. |
| 28 | Supply and fix for 150mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engr-in-charge. |
| 29 | Supply and fix for 100mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engr-in-charge. |
| 30 | Supply and fix for 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by Engr-in-charge. |
| 31 | Supply and fix for 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description), from wooden/ steel frame glazed putty or fixed with beads up to 4 storeys complete all as specified and as directed by Engr-in-charge. |
| 32 | Supply and fix in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engr-in-charge. |
| 33 | Supply and fix in repairs 20mm dia curtain rods of aluminium anodised powder coated fixed including with fixing brackets, stops, rollers etc., brackets complete all as specified and as directed by Engr-in-charge. |
| 34 | Supply and fix for powder coated aluminium frame for doors, windows, ventilators and partions etc., with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed by Engr-in-charge. |
| 35 | Supply and fix for powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws complete all as specified and as directed by Engr-in-charge. |
| 36 | Supply and fix for 4mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed by Engr-in-charge. |
| 37 | Supply and fix for 9mm thick prelaminated particle board interior grade prelaminated on one side with decorative choice lamination and with balancing white on the other side, fixed to aluminium frame work as in panel, etc., fixed as in repairs complete all as specified and as directed by Engr-in-charge.Note: Clips wherever required shall be measured and paid seperately under respective items of this schedule. |
| 38 | Supply and fix for 5.5mm thick sheet glass, ordinary quality, fixed with necessary glazing clips, in squares exc 0.5 sqm in each panel complete all as specified and as directed by Engr-in-charge. |
| 39 | Material and labour for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/ rectangular), area of each tiles exc 0.06 sqm but not exc 0.11 sqm, in floor etc., set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15mm thick in cement mortar 1:6 laying floor finish complete all as specified and as directed by Engr-in-charge. |
| 40 | Material and labour for glazed ceramic coloured tiles in vertical surfaces 350x250x7mm /450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10mm thick cement plaster in CM 1:4 complete all as specified and as directed by Engr-in-charge. |
| 41 | Material and labour for 25mm thick PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregagte) as in floor to receive floor finishes etc., complete all as specified and as directed by Engr-in-charge. |
| 42 | Material and labour for vitrified ceramic dark shade /double charged /ultra charged coloured tiles 10mm thick (square /rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-charge. |
| 43 | Material and labour for vitrified ceramic dark shade /double charged /ultra charged coloured tiles 10mm thick (square /rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1 sqm in skirting, dados etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-charge. |
| 44 | Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but not exc 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed or bedding in CM 1:4 complete all as specified and as directed by Engr-in-charge. |
| 45 | Material and labour for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/ rectangular), area of each tiles exc 0.11 sqm but not exc 0.18 sqm, in floor etc., set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15mm thick in cement mortar 1:6 laying floor finish complete all as specified and as directed by Engr-in-charge. |
| 46 | Material and labour for wall clading/ glazed earthen ware coloured tiles 200x100mm and 6 to 8mm thick including 10mm thick rendering in CM 1:3 on vertical surfaces such as skirtings, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed by Engr-in-charge. |
| 47 | Material and labour for precast coloured cement concrete pavement tiles of size 400x400 mm and minimum thickness 15mm and above laid over screed bed or bedding layer of CM 20mm thick in CM 1:6 complete all as specified and as directed by Engr-in-charge. |
| 48 | Material and labour in repairs for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed by Engr-in-charge. |
| 49 | Supply and fix steel water tube medium grade galvanized with all fittings 15mm bore and connections, complete including taking up and down steel tubing complete all as specified and as directed by Engr-in-charge. |
| 50 | Supply and fixsteel water tube medium grade galvanized with all fittings 20mm bore and connections, complete including taking up and down steel tubing complete all as specified and as directed by Engr-in-charge. |
| 51 | Supply and fix for steel water tube medium grade galvanized with all fittings 25mm bore and connections, complete including taking up and down steel tubing complete all as specified and as directed by Engr-in-charge. |
| 52 | Supply and fix in repairs 25mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engr-in-charge.Note: Quoted rate shall be deemed to include cost of scaffolding or ladders etc., required for approaching for repair work. |
| 53 | Supply and fix in repairs 20mm diagun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engr-in-charge.Note: Quoted rate shall deemed to include cost of scaffolding or ladders etc., required for approaching for repair work. |
| 54 | Supply and fix for 500 ltrs capacity potential moulded polyethylene water storage tank (cylindrical or vertical) hoisted and fixed in position including dismantling existing unserviceable any type, any capacity, water tank complete all as specified and as directed by Engr-in-charge. |
| 55 | Supply and fix for 1000 ltrs capacity potential moulded polyethylene water storage tank (cylindrical or vertical) hoisted and fixed in position including dismantling existing unserviceable any type, any capacity, water tank complete all as specified and as directed by Engr-in-charge. |
| 56 | Supply and fix in repairs 15mm bore fancy type bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-charge. |
| 57 | Supply and fix in reparis 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by Engr-in-charge. |
| 58 | Supply and fix in repairs 15mm bore stop valves, fancy type, chromium plated, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-charge. |
| 59 | Supply and fix for wash basin vitreous china white flat back of size 550x400mm including brass chromium plated pillar tap 15mm size, cast copper alloy with capstan head, brass chromium plated waste fittings, PVC waste pipe of suitable size, plug and porcelin stopper, CI brackets, cutting for and pinning in ends of brackets or erecting stand including taking down the old unserviceable one complete all as specified and as directed by Engr-in-charge. |
| 60 | Supply and fix for 15mm PVC connection 600mm long between ends with PTMT nuts and washer fixed as in repairs complete all as specified and as directed by Engr-in-charge. |
| 61 | Supply and fix in repairs plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engr-in-charge. |
| 62 | Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern), EWC white with \"P\" or \"S\" trap, including provision of fixing bolts and connecting upto drain and flushing pipe etc., complete all as specified and as directed by Engr-in-charge. |
| 63 | Supply and fix in repairs vitreous china squatt pattern, orissa pattern size 580x440mm white,with integral foot rests and \"P\" or \"S\" trap, white, including provision of fixing bolts and connecting upto drain and flushing pipe etc., complete all as specified and as directed by Engr-in-charge. |
| 64 | Supply and fix for vitreous china urinal, bowl type flat back of size 465x355x265mm white (minimum), with grating, fulsh pipe and union for discharge pipe, fixed as in repairs complete all as specified and as directed by Engr-in-charge. |
| 65 | Material and labour for powder coated aluminium windows of three tracks outer frame top, side sections, bottom frame (track) with guide track of size 92.5x31x1.50mm with sliding window shutters two nos with glass and one no with wire mesh (total 3 nos shutter) frame top and side bottom section with wheel track and inner locking section of size 40x18x1.5mm inculding glass 4mm thick and aluminium wire cloth, 0.45mm nominal dia wire and average width of aperture 1.40mm complete all as specified and as directed by Engr-in-charge. |
| 66 | Supply and fix for powder coated aluminium frame work for grills DG-104 (10mm) making shape and riveted with rivets and fixed with suitable channel complete necessary fixing arrangements etc., complete all as specified and as directed by Engr-in-charge. |
| 67 | Supply and fix for mirror of size 450x300mm, 5mm thick glass mirror with double coat for protection and longevity, decorative PU frame and silver plating on the back for better reflection complete all as specified and as directed by Engr-in-charge.Make: CERA Cat Part No.B3510120 or Techno-commercially equivalent in Prayag/ Hindware/ Parryware/ Somany |
| 68 | Supply and fix for vitreous china wash down water closet pan with soft close seat cover of size 655x355x735mm (pedestal pattern) white including S trap, including white plastic seat cover with mild steel CP hinging device, flush pipe complete jointing, connecting and making good the disturbed surfaces complete all as specified and as directed by Engr-in-charge.Make: Cera Cat part No.S1013207 (Ceromony 5D) with S trap 220mm or Techno-commercially equivalent in Prayag/ Hindware/ Parryware/ Somany |
| 69 | Supply and fix for vitreous china wash basin snow white of size 540x360x115mm with pedestal including brackets, including 32mm dia waste coupling and waste pipe fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engr-in-charge.Make: Cera Cat part No. WHB S2020154 (Colmax) or Techno-commercially equivalent in Prayag/ Hindware/ Parryware/ Somany |
| 70 | Supply and fix for single lever wall mixer (3 in 1) with self arrangement for both telephonic hand shower and overhead shower complete all as specified and as directed by Engr-in-charge.Make: Cera Cat part No. F1005413 or Techno-commercially equivalent in Prayag/ Hindware/ Parryware/ Somany |
| 71 | Supply and fix for over head shower 125x125mm dia (5\"\"x5\"\") with 200mm (8\") long shower arm and wall flange complete all as specified and as directed by Engr-in-charge.Make: Cera Cat part No. F7020111AB or Techno-commercially equivalent in Prayag/ Hindware/ Parryware/ Somany |
| 72 | Supply and fix for hand shower 120mm dia 5\" with 3 flow wall hook and 1.5m long hose pipe complete all as specified and as directed by Engr-in-charge.Make: Cera Cat part No. F7030113AB or Techno-commercially equivalent in Prayag/ Hindware/ Parryware/ Somany |
| 73 | Supply and fix for 15mm bore pillar tap quarter turn with aerator chromium plated complete all as specified and as directed by Engr-in-charge.Make: CERA Cat part No. F1016101 or Techno-commercially equivalent in Prayag/ Hindware/ Parryware/ Somany |
| 74 | Supply and fix for CP 2 way bib cock with all accessories complete all as specified and as directed by Engr-in-charge.Make. CERA Cat part No.F1099161 or Techno-commercially equivalent in Prayag/ Hindware/ Parryware/ Somany |
| 75 | Supply and fix in repairs CP health faucet brass body with wall hook and 1m SS braided rubber hose pipe with all accessories complete all as specified and as directed by Engr-in-charge.Make: CERA Cat part No.F8030108AB or Techno-commercially equivalent in Prayag/ Hindware/ Parryware/ Somany |
| 76 | Supply and fix for 15mm bore angle cock with wall flange complete all as specified and as directed by Engr-in-charge.Make: CERA Cat part No. F1018201 or Techno-commercially equivalent in Prayag/ Hindware/ Parryware/ Somany |
| 77 | Supply and fixbrass chromium plated fancy type towel rail, including brass CP brackets complete all as specified and as directed by Engr-in-charge.Make: Cera Cat part No. F5006103 or Techno-commercially equivalent in Prayag/ Hindware/ Parryware/ Somany |
| 78 | Supply and fixcorner glass self 225x225mm medium CP brackets complete all as specified and as directed by Engr-in-charge.Make: Cera Cat part No. F5005101 or Techno-commercially equivalent in Prayag/ Hindware/ Parryware/ Somany |
| 79 | Supply and fixstainless steel soap dish complete all as specified and as directed by Engr-in-charge.Make: CERA Cat part No. F5002106 or Techno-commercially equivalent in Prayag/ Hindware/ Parryware/ Somany |
| 80 | Supply and fixsoap dispenser with push type complete all as specified and as directed by Engr-in-charge.Make: CERA Cat part No. F5002111 or Techno-commercially equivalent in Prayag/ Hindware/ Parryware/ Somany |
| 81 | Supply and fixtoilet paper holder with flap guard including brass CP brackets complete all as specified and as directed by Engr-in-charge.Make: Cera Cat part No. F5002110 or Techno-commercially equivalent in Prayag/ Hindware/ Parryware/ Somany |
| 82 | Supply and fix in repair ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 20mm dia iron pipe and fixed (minimum wieght 15mm-142gms/ 20mm 210gms/ 25mm 455gms/ 40mm 690gms) complete all as specified and as directed by Engr-in-charge. |
| 83 | Material and labour for precast cement concrete block masonry with solid blocks, exc 10cm in width and setting in mortar type C1 1:3:6 set in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 84 | Material and labour for walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed by Engr-in-charge. |
| 85 | Material and labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 86 | Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 87 | Material and labour for rendering 5mm thick on concrete surfaces of ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 88 | Material and labour for PCC 1:3:6 type C-1 (Using 20mm graded broken stone aggregate) as in surface channel and drain including necessary form work complete all as specified and as directed by Engr-in-charge. |
| 89 | Material and labour for extra fair forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement, including forms, moulds, mi-tred/stopped ends etc., complete all as specified and as directed by Engr-in-charge. |
| 90 | Material and labour for providing cement concrete type B1,1:2:4 (Using 20mm graded stone aggregate) as in copings including formwork complete all as specified and as directed by Engr-in-charge. |
| 91 | Material and labour for cement concrete type C-1, 1:3:6 (Using 20mm graded stone aggregate) 75mm thick as in plinth protection, pavement etc., and finished the surface even and fair complete all as specified and as directed by Engr-in-charge. |
| 92 | Material and labour for 100mm thick cement concrete 1:2:4 type B-2 (Using 40mm graded stone aggregate) as in floor finishes and pavings even and smooth without using extra cement laid in alternate panels complete all as specified and as directed by Engr-in-charge. |
| 93 | Material and labour for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc., similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-charge. |
| 94 | Supply and fix for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engr-in-charge. |
| 95 | Material and labour for 75mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base complete all as specified and as directed by Engr-in-charge. |
| 96 | Material and labour for coloured rubberised chequered cementconcrete tiles of size 300x300x25mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 97 | Material and labour for 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and as directed by Engr-in-charge. |
| 98 | Material and labour for 60mm thick coloured machine pressed interlocking pattern paver block any shape and size conforming to IS 15658-2006 of M-35 grade laid over and including 40-50mm thick M sand cushioning layer and grouted with dry sand complete all as specified and as directed by Engr-in-charge. |
| 99 | Material and labour for sand filling under floors or foundation, and receiving to interlocking tiles complete all as specified and as directed by Engr-in-charge. |
| 100 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed by Engr-in-charge. |
| 101 | Supply and fix for rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates etc., complete all as specified and as directed by Engr-in-charge. |
| 102 | Supply and fix for prepainted galvalume aluminium zinc coating GIbased carrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge. |
| 103 | Supply and fix for prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick as in ridge of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge. |
| 104 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards /slabs/ blankets, any thickness including cover fillets etc., complete all as specified and as directed by Engr-in-charge. |
| 105 | Supply and fix for anodised aluminium snap grid frame work for false ceiling complete all as specified and as directed by Engr-in-charge. |
| 106 | Supply and fix for 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of aluminium/ G.I./ M.S complete all as specified and as directed by Engr-in-charge. |
| 107 | Providing and fixing in repairs 10mm thick plaster of paris ceiling (gypsum anhydrous) to flat surface any sunk or raised moulding over 2nd class soft wood fillets, aluminium/ metal frame, work and reinforced with G.I. wire mesh complete all as specified and as directed by Engr-in-charge. |
| 108 | Supply and fix for solid PVC wall panelling decorative typeconsisting of 5mm thick plain colour PVC prelaminated sheet inclusive of solvent cement and and fixing at site on PVC frame/ wooden frame complete all as specified and as directed by Engr-in-charge. |
| 109 | Supply and fix for 5mm thick PVC sheet fillets of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and as directed by Engr-in-charge. |
| 110 | Material and labour for preparing new plastered or unplasteredsurface of walls and applying two coats of cement base paint on walls a coat of chalk primer complete all as specified and as directed by Engr-in-charge. |
| 111 | Material and labour for preparing old plastered or unplasteredsurface of walls and applying two coats of cement base paint on walls complete all as specified and as directed by Engr-in-charge. |
| 112 | Material and labour for preparation of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed by Engr-in-charge. |
| 113 | Material and labour for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of chalk primer whitening complete all as specified and as directed by Engr-in-charge. |
| 114 | Material and labour for preparation of old plastered surfaces of wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant paint over 3mm thick wall care putty paintthrough mechanical means complete all as specified and as directed by Engr-in-charge. |
| 115 | Material and labour for preparation of untreated new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge. |
| 116 | Material and labour for two coats of synthetic enamel paint on new wooden surfaces over coat of pink primer to new surfacesincluding preparation of surfaces, over 10cm width or girth complete all as specified and as directed by Engr-in-charge. |
| 117 | Taking down eaves gutters and rain water pipes (any size orpattern) including all fittings head, shoes, bends swan-necks, etc., including cleaning and refixing or removed to store measured overall as fixed along the centre line over fittings and accessories complete all as specified and as directed by Engr-in-charge. |
| 118 | Supply and fix for 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls complete all as specified and as directed by Engr-in-charge. |
| 119 | Supply and fix for 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls /floor complete all as specified and as directed by Engr-in-charge. |
| 120 | Supply and fix for 75mm PVC (SWR) bends any radius complete all as specified and as directed by Engr-in-charge. |
| 121 | Supply and fix for 110mm PVC (SWR) bends any radius complete all as specified and as directed by Engr-in-charge. |
| 122 | Supply and fix for 110mm PVC (SWR) vent cowl complete all as specified and as directed by Engr-in-charge. |
| 123 | Supply and fix for 75mm PVC (SWR) vent cowl complete all as specified and as directed by Engr-in-charge. |
| 124 | Supply and fix for PVC (SWR) 75mm dia multifloor trap with grating including jointing with solvent cement etc., complete all as specified and as directed by Engr-in-charge. |
| 125 | Supply and fix in repairs PVC (SWR) gully trap 125/ 110mm, setting and jointing with solvent cement etc., complete all as specified and as directed by Engr-in-charge. |
| 126 | Removing building materials etc., (other than spoil payable under items) to a distance of 10 Km or beyond the lead including in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed by Engr-in-charge.Note: All debris shall be removed from MoD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations. |
