|
| 1 | BILL NO. 1: ROAD MAINTENANCE |
| 2 | Providingspot reconditioning, reconstruction and regravellingto repair specific erosion or other damagesforrestoringthe eroded area tooriginally constructed cross section on cutsandfillsslopes/ shouldersconformingto TechnicalSpecifications Clauseno.3002.Fill material should be brought from borrow areas located outside ROW conforming to TechnicalSpecification no. 305. Wateredand well compactedwithplate compactoror power rammerwith allleadsand lifts as directed by the Engineer (Quantity of compacted Fill material to be measuredoncross sectional area basis) |
| 3 | Removal of rank vegetation/weeds and undesirable vegetation from shoulders, embankmentslopes upto ROW (both sides) complete in all respects including breaking of clods,rough dressingand disposal of wastematerial and vegetation at a place outside ROW as per direction of Engineer- In-Charge and as per Maintenance Standards Clause 3.3 (Frequency will be once in a quarter).Shouldersincludingside slopesof embankmentupto toe line on both sides of the carriageway.(Frequencyof cleaning will be four times in ayear;howeverlimitedto onlyareaspronetogrowth of rank/ undesirable vegetation and weeds). |
| 4 | Providingslurrysealfor filling of hair cracks, surface cracksandpreventive/ renewal treatment as per MoRTH Specification Clause 512. |
| 5 | BILL NO. 2: Road Property Maintenance |
| 6 | Providing and marking of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250gms/ sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished Surface to be level, uniform and free from streaks and holes complete in all respects. The job includes marking of centre line, shoulder line, edge line, zebra crossing marking, arrows and dashes marking at the junctions as per Technical Specifications Clause 803.4 complete in all respect and as per approval of the Engineer-in-Charge. |
| 7 | Providing and laying of hot applied thermoplastic compound 15 mm thick including reflectorising glass beads @ 500 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes. |
| 8 | Cats Eye/Pavement Marker (NMC nail Less):-Made out of Acrylic-strene-Acrylonitril or Hi-Impect polysterene fitted with Moulded of Methacrylate (NMC) reflector cube corner reflector design; Filled with tightly adhering potting compound as per ASTM D788 size 11.5 cm X 7cm X 1.6 cm or 10 cm X 10 cm X 1.75 cm provided with bituminous adhesive in sufficient quantity with each unit for fixing. No nail should be allowed for fixing. |
| 9 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium composite pannel sheeting, 4mm thick (with MS angle frame 35x35x5), supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per attached drawing. (Rate all including supply and fixing of all material, labour, T&P etc. required for proper complition of work as per MoRTH specification Cl. 801 and IS/IRC codes.) |
| 10 | 600 mm dia Circular sign |
| 11 | 900 mm triangular sign. |
| 12 | 50x60 cm single chevron |
| 13 | 30x90 cm (Left/Right) object Hazard |
| 14 | Solar Power road marker (Solar Studs)The solar cateye shall be produced from an engineered polymer selected for superior impact resistance and weather-ability. The top of the marker should be transparent for solar charging and light output in active mode. The base of the body shall be yellow or neutral white as approved by Engineer In-charge. The marker shall incorporate a solar panel (comprising of solar cells) for converting solar energy into electricity, a storage device for storing the energy, LEDs for illumination and a design for providing 360 degree uniform smooth illumination through light tube. The marker shall also have high reflective plastic lenses for conspicuity in passive mode and dual shanks for improved road presence. These markers are intended for application directly onto pavement surfaces and shall be applied with epoxy resin adhesives designed for use with raised pavement markers and as supplied by the marker manufacturer separately. The solar cateye shall be of height: 65 ± 2 mm & Maximum Diameter: 136 ± 4 mm. The solar stud/ cateye shall be tested for water ingress as per IP 65 standards & IP 68 standard & compressive strength of 13635 Kg tested in accordance with ASTM D4280 and test report shall be submitted at the time of bidding of tender. If somehow tender pre qualification condition do not ask for government report then the report shall be submitted to engineer-in-charge before finalization of bill. The rate shall include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. |
| 15 | Providing treatment and repair of pot holes/ruts and anydepth/patchrepairof all types of bitumen pavement completeasper TechnicalSpecification Clause 3004.2 and as per direction of Engineer by usingpavinggrade bitumen/emulsion/cold readymixmaterial. The job includesremoyalof all failed material,trimmingof completed excavation to providingfirmvertical faces,cleaningof surface, painting of tack coat on the sidesandbaseof excavationasperClause no. 503 back filling the patch withbituminous materialas per clause no.509.Compacting trimming and finishing the surface to forma smoothcontinuous surfaceallasperClause no. 3004.2 of Technical Specification. |
| 16 | EMERGENCY WORK PROVISION FOR RESTORATION |
| 17 | Truck Tipper (10 Tonne) |
| 18 | Hydraulic Excavator (JCB) |
| 19 | Labour: skilled |
| 20 | Labour unskilled |
| 21 | WMM |
