|
| 1 | Taking down cement plaster on brick or stone walls etc. including raking out of joints, hacking for key, scrubbing down with water etc. of any description, complete all as specified and as directed. |
| 2 | M&L 15mm thick renderingin cement mortar 1:6 onbrick or concretesurfaces of walls, finished the surfacefair and even without using extra cement, complete all as specified and as directed. |
| 3 | M & L 15 mm thick renderingin cement mortar (1:4),on brick or concrete wall surface, mixed with water proofing compound @ 3% (Make :- Fosroc/ Nausar or equivalent) by weight of cement, finished fair & even without using extra cement, complete all as specified and as directed. |
| 4 | M & L 5 mm thick renderingin cement mortar (1:3)on ceiling surface, finished even & smooth without using extra cement, complete all as specified and as directed. |
| 5 | M & L for Ready Mix Plaster (pre-mixed with graded sand, cement and additives), conforming to IS: specifications, applied in thickness 10 to 12 mm on fair faces of brick work/concrete surfaces, mixing with clean water as per manufacturer’s instructions, finished even and smooth (without using extra cement), complete all as specified and directed. |
| 6 | M & L for Ready Mix Plaster (pre-mixed with graded sand, cement and additives), conforming to IS: specifications, applied in thickness 12 to 15 mm on external faces of brick work/concrete surfaces, mixing with clean water as per manufacturer’s instructions, finished even and rough (without using extra cement), complete all as specified and directed. |
| 7 | M & L for Ready Mix Plaster (pre-mixed with graded sand, cement and additives), conforming to IS: specifications, applied in thickness 6 to 8 mm on ceiling surfaces including necessary scaffolding, mixing with clean water as per manufacturer’s instructions, finished even and smooth (without using extra cement), complete all as specified and directed. |
| 8 | M & L for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4 (1 cement :4 coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand:2 coloured marble stone chipping 10mm nominal size) including using Colour pigment & marble powder as required in ground in panels with groove all around as per approved pattern includingscrubbing and washing the top layer with wire brushes and water to expose the stone chippings includind forming groove of uniform size 15mm wide and 15mm deep as per approved pattern, complete all as specified and as directed. |
| 9 | M&L preparation of new plastered wall surfaces and applying two coats of Oil Bound Distemper over and including primer and 2 mm thick cement based wall care putty, complete all as specified and as directed. |
| 10 | M&L preparation of new plastered wall surfaces and applying two coats of weather proof Exterior emulsion paint (Colour & Shade scheme shall be as approved by the GE & user)over and including a coat of priming paint, over and including 2 mm thick cement based wall care putty, complete all as specified and as directed. Make - Asian Apex Ultima or equivalent of make specified in PS. |
| 11 | M&L for preparation of new plastered ceiling and applying three coat of white wash, complete all as specified and as directed. |
| 12 | M & L for preparation of old decorated, wall surface by scrapping by electrically operated grinder machine/electric regmal machine andapplying one coat ofwall care putty on patches surfaces then scrubbing by sand paper to prepare a even surface and applying priming paint followed by applying one coats of OBD of any colour washing down with water, complete all as directed. (Asian Paints,Berger) |
| 13 | M&L for preparation of old decorated, wall, roof(corrugal) surface, by brooming and removing all loose layersof old treatment, efflorescence soot and moss by wire brush and filling all nail holes and patches with cement based wall care putty and applying one coat of weather proof Exterior emulsion paint of colour & shade as approved(to match with the Existing surface), complete all as specified and as directed.Make- Asian Apex Ultima or equivalent of make specified in PS. Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work, as required. |
| 14 | M&L for preparation of pathway/Flooring (Over Interlocking/Chequired tile surface) or any type of surfaces old/New or any position and applying one coat of floor paint of superior quality, complete all as specified and as directed.Make- Asian/Berger/Indigo. |
| 15 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises, complete all as specified and as directed. |
| 16 | M&L for 25 mm thick PCC 1:2:4, Type B1 (using 20 mm graded stone aggregate) below tiles for levelling of existing surface, complete all as specified and as directed. |
| 17 | S&F Glazed coloured Vitrified tiles(light shade) 10 mm thick (square/ rectangular) polished, area of each tiles Not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the shade of tile, over and including 15 mm thick screed bedding layer in CM 1:6, complete all as specified and as directed. |
| 18 | S&F Glazed coloured Vitrified tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the shade of tile, over and including 15 mm thick screed bedding layer in CM 1:6, complete all as specified and as directed. |
| 19 | S & Fnon skidceramic coloured tiles 7 to 8mm thick area of each tiles exceeding 0.11 sqmm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match, over 15mm thick screed bed in CM (1:6), complete all as specified and as directed. |
| 20 | M&L glazed coloured ceramic tiles, 600x300x7mm thick, in vertical surfaces such as skirting/dado etc, set and jointed in cement slurry, laid over & including 10mm thick rendering/ backing coatin cement mortar 1:4, set, jointed and pointed in white cement mixed with colour pigment to match the shade of tile, complete all as specified and as directed. |
| 21 | M&L for heavy duty coloured (approved colour) fully vitrified paving tiles of size 400mmx400mmx11 to 12mm thick, set and jointed in neat cement slurry and pointed in coloured or white cement to match the shade of tiles over and including 15 mm thick screed in cement mortar 1:6, complete all as specified and directed. |
| 22 | M&L for Non-skid Semi Vitrified Ceramic Tiles of size 300x300x8 to 10 mm thick (or as specified), coloured, square / rectangular, conforming to IS: 15622, water absorption less than 3%, breaking strength ≥ 1500 N, Modulus of Rupture ≥ 35 N/mm², skid resistant (Coefficient of Friction ≥ 0.6 dry and ≥ 0.4 wet as per IS: 13893), frost resistant, with straight edges and true size. Tiles to be laid in floors, treads of steps, landings, balconies, varandahs and outdoor areas, over and including 20 mm thick cement mortar (1:4) bed, set and jointed in neat cement slurry, pointed in white / coloured cement to match the shade of tiles, including rubbing, polishing, curing and cleaning, complete all as specified and directed. |
| 23 | Dismantling of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortarin floor, aprons etc and including disposal of all debrisexc 1.5 KMtr not exc 5 Km, complete all as specified and as directed. |
| 24 | M&L for 100 mmPCC type D -2 (1:4:8) using 40 mm graded crushed stone aggregate as in Sub base, complete all as specified and directed. |
| 25 | M&L for 50 mmPCC type B-1 (1:2:4) using 20 mm graded crushed stone aggregate as in levelling course even and rough, complete all as specified and directed. |
| 26 | M&L for chequered cement concrete tiles with grey cement & pigments, size 30cmx30cmx 25 mm thick,set, jointed and pointed in neat cement slurry pigmented to match colour/shade of tiles as in floors etc.; laid over & including 20 mm thick screed bed or bedding layer in CM 1:4, etc, complete all as specifiedand directed. |
| 27 | M&L for 80 mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 28 | M&L for 60 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour in any design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 29 | M&L for 20-22 mm thick machine cut kota stone slab flooringjointed and pointedwith grey cement slurry mixed with pigment to match the shade of the slab laid over 20 mm thick screed bed of CM 1:6 including rubbing and polishing, complete all as specified and directed. |
| 30 | M&L for 15 to 18 mm thick machine cut kota stone slab in riser, steps and skirting jointed and pointedwith grey cement slurry mixed with pigment to match the shade of the slab laid over 10 mm thick screed bed of CM 1:4 including rubbing and polishing, complete all as specified and directed. |
| 31 | S&Fin repairKerb stone of 300x300x 100mm thick precasted plain cement concrete type B0 , 1:2:4 , using 12.5mm graded crushed stone aggregate incl earth work for laying kerb stones, complete all as specified and as directed. |
| 32 | S&F in repair stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling of existing MS/SS Grill, complete all as specified and as directed. |
| 33 | S & F in repair 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixe with coach screw and washer in roof, wall etc. including dismantling of old/ existing fibre sheet, complete all as specified and directed. |
| 34 | S & F in repairs of 4mm thick ACP( Al composite panel) cladding of approved quality and colours as approved by GE, Fixing in MS frame at any ht and incl MS frame of size not exc 0.36 Sqm (used in rectangular tubes of size 50.8mmx25.4mmx2.9mm th or square tubes 38mmx 38mm x2.9mm th are used in frame) and filling the joints with all weather silicon sealant incl all mouldings, cutting, etc complete all as specified and directed. |
| 35 | S&F in repair of Mild steel rolled pressed sheet having thickness not less than 2 mm in any design/ pattern as approved by Engr-in-Charge. |
| 36 | M& L for Avion Gloss Mosaic Tiles 25 mm x 25 mm Fixing of Glass Mosaic tiles for swimming poll using tile adhesive and filling the joints using Epoxy grout and cleaning complete. With Epoxy Grout, Adhesive after cleaning & Treatment of RCC:- RCC Raft surface to visualize the cracks/joints etc. Opening the construction joints/Starter joints in (1/2\" x 1/2\" ) \"V\" groove manner and fixing 1/2\" dia nozzle at a spacing of 1.5 m c/c and patching with (1:3) mortar mixed with make:- Dr Fixit URP 301\" .Waterproofing :- Applying primer coat bonding agent and waterproofing coating works 1st Coat & 2nd Coat of Dr.Fixit fat Flex\". Surfacecsystem screeding for protecting concrete and masnory over the entire surface after 3 Hours, over the fibreglass surface air curing for 1 to 2 days. Base Coat Plaster (Two coat ):- Laying 25 mm thick (1:4) protective plaster mixed with Gujrat Sand, cement , Dr Fixit LW+ -integral waterproofing compound @ 200 ml / 50 Kg of Cement and curing the same for 7 days, complete all as specified and directed. |
| 37 | S&F Glass Brick of size 190mm x 190mm x 80mm set and pointed with adhesive and grounting powder including glass block spacers, GI wire, other connected items and MS frame work all around the brick walls complete all as per manufacturer instruction and specified and as directed. |
| 38 | S&Fin repair 10 mm thick toughened glass as in fixed or door shutters of size area exc 1.50 Sqm but not exc 3 Sqm, including necessary floor spring hydraulically regulated, other side fixed on pivot CP fittings and fixtures, CP handles 300 mm long, CP locking arrangement, necessary cutting & holes moulding and fixed including engraving, emblem and lattering not exc 200 mm, complete as per directed. |
| 39 | S & F in repair of Modular Wardrobes, Cupboards, Kitchen Cabinets, Cabinets, Drawers, Shelves, Vanity Units, Dressing Tables including shutters (depth 45 cm up to 70 cm), complete, consisting of front side, bottom, top, two sides and partitions made out of 15 to 18 mm thick HDHMR board and backside made out of 8 to 10 mm thick HDHMR board (Action Tesa or equivalent), finished with machine pressed 0.5 to 0.8 mm thick fabric/glossy coloured laminate on all exposed front faces and decorative laminations on other faces; all exposed edges of boards machine pressed with 0.8 mm edge band (Rehau German or equivalent), colour/design/patterns as approved by GE, including all accessories and fittings such as auto/soft closing hinges for shutters, C/J Gola profile for handle-less design, telescopic channels 18\"\"/20\"\" long, rollers for smooth sliding of drawers, locks for shutters, SS baskets/pull-outs, cutlery trays, partition fittings, etc, complete all as specified and directed.Note :Front area shall be be measured for payment purpose). |
| 40 | S&F WPC railing combining WPC railing combining WPC Board/Fancy designer type grating and WPC frame 100% solid PVC (wood polymer composite) railing of required length and of 600 to 750 mm height, and 24 mm Thickcompising of K- Value 58-60 (Suspension Grade) , Calcium carbonate and natural fibres (Wood Powder/rice husk/wheat husk) and Non toxic additives, made from single extrusion process, WPC foam board with having minimum density 650 Kg/cbm and WPC frame having minimum density 780 Kg/cbm manufactured by RAJSHRI an ISO 9001-2015 certified company, having a good screw holding capacity (Screw withdrawal strength of 2000 (Face) & 1100N (Edge), Minimum comprosing of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of speed of flame of Class A Category with property of being termite/ borer free water/ moisture proof and fire resistance. For WPC railing WPC Jalli to be fixed with WPC frame of size 75 x 50 mmwith necessary supporting length at vertical as well as horizontal at wall frames to be fixed with 75 x 75 mm GI L or SS Cleats to support vertcal frame length including demolition of existing RCC Jallii with frame, complete all as specified and directed. (Make - Rajshri/ Cobra or Equivalent ).Note:- The said item shall be fixed over boundary wall/ roof tops and in any other position as required on site. |
| 41 | M& L for 16 mm thick Sand stone cladding/Facing tiles gang saw cut with machine cut edges, uniform Size, colour of each stone polishing, rubbing & including silicon treatment between two stone for wall any height over and including 10mm thick renderingin cement mortar 1:4, complete all as specified and directed. |
| 42 | Dismantling water tanks including ball valve and all other connection cap exc 500 ltr but n.exc 1000 ltr and removing from site, complete all as specified & directed. |
| 43 | S&F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position including minor repairing to iron pipe for making connections all as specified in SSR Part In any position white in colour 1000 ltr capacity, complete all as specified and as directed. |
| 44 | S&F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position including minor repairing to iron pipe for making connections all as specified in SSR Part In any position white in colour 500 ltr capacity complete all as specified. |
| 45 | S & F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia, complete all as specified and as directed. |
| 46 | S & F in repairs Vitreous china floor mounted WC( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover, flushing cistern, with P or S trapwith all fitting and fixture, complete all as specified and as directed. |
| 47 | S & F in repair Vitreous China wash down water closet pan (pedestal pattern) of size 580 mm white with ‘P’ or ‘S” trap, any pattern including Seat Cover (excluding flushing cistern and flush pipe), complete all as specified and as directed. |
| 48 | S & F in repair 10 LtrPVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and as directed. |
| 49 | S&F in repair PVC connection 15mm bore with PTMT nuts of length 600mm, complete all as specified and directed. |
| 50 | S&F in repairs, health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube andABS wall hook including making connection and fixed in position, complete all as specified and directed. |
| 51 | S&F in replacement for CP toilet paper holder fixing to wall with ss screw, compete all as specified and directed. |
| 52 | S&F in replacement sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and as directed. |
| 53 | S&F in repair white Wash Basin with full Pedestal fo size 560 x 415 x 820 mm, complete all as specified and directed.Make : Prayag/ Hindware/ Cera. |
| 54 | S&F 15mm bore brass CP WHB mixer swan neck type for mixing hot & cold, elbow operated water screwed down for iron pipe and fixed, complete all as specified and as directed. |
| 55 | S & F in repair looking mirror 600 mm x 750 mm bevelled edge mirror or selected quality glass, mounted in PVC moulded frame and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 56 | Taking up or down 25mm bore steel tubingand connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 57 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 58 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 59 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings with outer dia 32 mm on walls/ceiling or laying in floors, complete all as specified and as directed. |
| 60 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings with outer dia 25 mm on walls/ceiling or laying in floors, complete all as specified and as directed. |
| 61 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings with outer dia 20mm on walls/ceiling or laying in floors complete all as specified and as directed. |
| 62 | S&F 20 mm bore Brass Elbow for fixing of cpvc pipe, complete all as specified and directed. |
| 63 | S&F 20 mm Brass Tee for fixing of CPVC pipe, complete all as specified and directed. |
| 64 | S&F 20 mm Female Brass Threaded Adaptor (MTA/ MBTA) ) for fixing of cpvc pipe, complete all as specified and directed. |
| 65 | S&F 20 mm Male Brass Threaded Adaptor (MTA/ MBTA) ) for fixing of cpvc pipe, complete all as specified and directed. |
| 66 | S&F 25 x 20 mm Brass socket reducer for fixing of cpvc pipe, complete all as specified and directed. |
