|
| 1 | CHAIR SCHOOL WITH HANDBOARD : FD/E6 /MAP/05 |
| 2 | M & L 18mm thick Prelaminated MDF board, laminatd one side with decorative choice lamination & other side balancing ehite lamination as in 585*300 mm size writing board of chair school with hand board, including PVC edging alround, screwed to existing 25mm dia hollow steel pipe inserted in 20mm dia MS road welded to frame including taking out old unserviceable writing board complete all as \"specified and directed. |
| 3 | M & L for taking out broken MS hinges of handrestand fix new MS sheet hinges of size and shape as per drawing by welding to 25 mm MS pipe at one end and make screw provionssuitable to fix hand board at other end of Chair school with hand board complete all as specified and directed. |
| 4 | M & L for replacing old broken left/right sideframe including the fromnt/rearlefg portions and the top handle portion of Chair school with hand board, eith new 20 mm dia 16 G steel condiit pipe of 1mtr long shall be measured, duly welded to the chair frame as per drawing. Replaced conduit frazme to be given 2coats of synthetic enemel paint (black colour) over a coat of red oxide zic chromate primer complete to match with existing color all as specified and as directed. |
| 5 | S & F new PVC one piece seat and back of chair sclool with hand board(Blowplast or equivalent brand) to steel frame with screws all as per drawing and as directed. |
| 6 | S & F PVC inner shoe suitablefor 25 mm dia MS pipe leg of chair school complete all s specified and directed. |
| 7 | M & L preparation of old treated steel surfaces of chair school with handboard and applying a coat of synthetic enamel black/brown p0apint complete all as specifed. |
| 8 | TABLE DINING FOR 6/4 PERSONS : FD/MAP-II/03 Dismantle, take out carefully & replace old components of table dining. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. |
| 9 | Replacement of old existing broken top of table dining 6 persons of any description with S&F newtop oftable dining 6 persons with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE). |
| 10 | All as per Srl item No. 2.01 here-in-before but top of table dining 4 persons. |
| 11 | L-Shape wooden corner of size 4\" x 4\" x 1\" to the Table between legs and rail to be fixed with screw. |
| 12 | Replacement of leg with S&F new teak wood leg made to shape |
| 13 | Replacement of long rail of table dining 6 Persons with S&F new teak wood long rails made to shape |
| 14 | Replacement of long rail of table dining 4 Persons with S&F new teak wood long rails made to shape |
| 15 | Replacement of short rails with new teak wood short rails made to shape |
| 16 | S & F new Nylon Buffer of superior quality with suitable screws for fixing. |
| 17 | Polishing one coat to old and two coats to new surfaces to table dining 6 persons with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 18 | All as per Srl item No. 2.09 here-in-before but table dining 4 persons. |
| 19 | TABLE BEDSIDE STEEL : FD/E6/MAP/15(R) S & F following components of table bed side including dismantling taking out carefully & replace old components of table bed side. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. |
| 20 | Replacement of old existing broken top of table bed side of any description with S&F new table top of 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:-Century or equivalant as approved by GE). |
| 21 | All as per item 3.01 here in but for sides of table bedside. |
| 22 | S & F new legs to table bed side steel made of 18mm MS square pipe placed in position as shown in drg. |
| 23 | S & F new CP steel 100mm long handle to the drawers of the table bed side steel placed in position as shown in drg. |
| 24 | S & F new 6mm commercial ply at back of the table bed side steel fitted with screws as shown on drg.(Make of Ply :-Greenply/ Century/ Duro) |
| 25 | Replacement of Upper drawer made out of 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:-Century or equivalant as approved by GE). |
| 26 | Replacement of Lower drawer made of 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:-Century or equivalant as approved by GE). |
| 27 | S & F new telescopic channel (Make :- Hettich/ Ozone/ Epco). |
| 28 | S & F new rubber shoes 18mm square of high quality placed in position as shown in drg. |
| 29 | Welding work wherever required as directed by EIC and GE. |
| 30 | M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the table bed side, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). |
| 31 | TABLE COMPUTER : FD/E6/MAP/03 S & F following components of table computer including dismantling taking out carefully & replace old components of table computer. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. |
| 32 | Replacement of old existing broken top oftablecomputerof any description with S&F new table top of 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE). |
| 33 | All as per srl item No. 6.01 here-in-before but bottom shelf of Table computer. |
| 34 | All as per srl item No. 6.01 here-in-before but vertical board on side of Table computer. |
| 35 | All as per srl item No. 6.01 here-in-before but keyboard tray of Table computer. |
| 36 | All as per srl item No. 6.01 here-in-before but drawer of Table computer. |
| 37 | All as per srl item No. 6.01 here-in-before but pull out mouse tray of Table computer. |
| 38 | Removing of old U/S telescopic channel of key board and S & F new stainless steel telescopic channel to Table computer. (Make :- Hettich/ Ozone/ Epco) |
| 39 | S&F new knobs to Table computer. |
| 40 | S&F new handles to Table computer. |
| 41 | S&F new Nylon buffers to Table computer. |
| 42 | Welding work wherever required as directed by EIC and GE. |
| 43 | M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Table Computer paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). |
| 44 | CHAIR WRITING OFFICERS : FD/E6/MAP/12 S & F following components of chair including dismantling taking out carefully & replace old components of chair Complete all as shown on drg, specified and directed by the Engineer-in-Charge. |
| 45 | Removing U/S damaged Seat & back of Chair writing. S & F new seat & back made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic mtr on Hampden machine.(Make of Ply :-Greenply/ Century/ Duro) |
| 46 | Removing old U/S arm rest of chair writing officer and S&F new arm made of black integral skin polyurethane with 75-85 shore \"Á \" hardness & reinforced with MS insert all as specified and directed. |
| 47 | Taking out U/S /broken frame and S&F new frame as per drg duly painted as per drg and as directed by EIC. |
| 48 | Welding work wherever required as directed by EIC |
| 49 | Replacement of shoe with steel screws where required with S&F new rubber pads of superior quality with suitable Steel Screws complete all as shown on drgs specified & directed by the Engr-in- Charge. |
| 50 | M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chair Writing Officers (MAP) paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). |
| 51 | SOFA SET 5 SEATER : FD-281/373 |
| 52 | M & L for removal of existing broken/unserviceable leg of sofa set 5 seater with arms and replacing the same with new leg 1st class hard wood (Teak) of size & dimension of the parts shall be of rthe same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced partsto match with existing all as specified and directed. |
| 53 | M & L for removal of existing broken/unserviceable side rail of sofa set 3 seater with arms and replacing the same with new side rail 1st class hard wood (Teak) of size & dimension of the parts shall be of rthe same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced partsto match with existing all as specified and directed. |
| 54 | M & L for removal of existing broken/unserviceable front long rail of sofa set 3 seater with arms and replacing the same with new long rail 1st class hard wood (Teak) of size & dimension of the parts shall be of rthe same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced partsto match with existing all as specified and directed. |
| 55 | M & L for removal of existing broken/unserviceable stiffner of sofa set 3 seater with arms and replacing the same with new stiffner 1st class hard wood (Teak) of size & dimension of the parts shall be of rthe same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced partsto match with existing all as specified and directed. |
| 56 | M & L for removal of existing broken/unserviceable leg of sofa single seater with arms and replacing the same with new leg 1st class hard wood (Teak) of size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced partsto match with existing all as specified and directed. |
| 57 | M & L for removal of existing broken/unserviceable side rail of sofa single seater with arms and replacing the same with new leg 1st class hard wood (Teak) of size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced partsto match with existing all as specified and directed. |
| 58 | M & L for removal of existing broken/unserviceable front long rail of sofa single seater with arms and replacing the same with new leg 1st class hard wood (Teak) of size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced partsto match with existing all as specified and directed. |
| 59 | M & L for removal of existing broken/unserviceable stiffners of sofa single seater with arms and replacing the same with new one1st class hard wood (Teak) of size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced partsto match with existing all as specified and directed. |
| 60 | M & L for supply of new cushions for sofa set 5 seater (set consisting of 10cushions) of size 560 X 530 X 100 mm thick 40 dencity of make sleepwell or equivalent as approved by GE and duly covered with tapestry cloth costing not less than Rs. 300/- per mtr over a cover oflong cloth complete all as specified and directed. |
| 61 | BIN LINEN MULTIPURPOSE : FD/E6/MAP/09 Dismantle, take out carefully & replace old components of bin linen multipurpose. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. |
| 62 | Removing of old U/S top from bin linen multipurpose and S&F newtop ofbin linen multipurpose with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE). |
| 63 | Removing of old and U/S door shutters of bin linen multipurpose S&F newdoor ofbin linen multipurpose with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE). |
| 64 | Removing of old U/S hingses and S & F new hinges to bin linen multipurpose as per size and design shown on drg complete all as specified and directed. |
| 65 | Removing of old broken handles and S & F of new chromium plated steel handles to bin linen multipurpose as per shown on drg and as directed. |
| 66 | Removing of old magnetic catcher and S & F of new magnetic catcher to bin linen multipurpose as per size and design shown on drg complete all as specified and directed. (Make:- Ebco/Hettich). |
| 67 | Removing of old U/S side and S & F new side made out of S&F newtop oftable with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE). |
| 68 | Removing of old U/S back ply ofbin linen multipurpose and S & F new back ply of same size made out of 12mm thick commercial plywood (ISI marked) all as shown in drg and as directed. (Make of Ply :-Greenply/ Century/ Duro) |
| 69 | Replacement of U/S drawer with new drawer of same size and shape. Front of the drawer shall be made out of 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked as approved by EIC/GE and including handle Sides, base and back of drawer made out of 12mm thick ply wood (ISI marked) and fixing all as shown in drg including one coat of lacquer polish to old and two coats to new surfaces. (Make:- Century or equivalant as approved by GE). |
| 70 | Removing of old U/S leg frombin linen multipurpose and S & F new Ist class hard wood teak leg to side board all as shown on drg and as directed. |
| 71 | Polishing one coat to old and two coats to new surfaces to bin linen multipurpose with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 72 | CHAIR COMPUTER : FD/E6/MAP/01 :S & F following components of Chairincluding dismantling taking out carefully & replace old components of Chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. |
| 73 | Removing U/S damaged Seat & back of Chair computer, S & F new seat and back made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam(Make: Sleepwell/ Springwell/Kurl-on) shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic Mtr on Hampden machine. (Make of Ply :-Greenply/ Century/ Duro) |
| 74 | Removing old U/S arm rest of chair computer and S&F new one made of black integral skin polyurethane with 75-85 shore \"Á \" hardness & reinforced with MS insert and shall be weather and scratch resistant. |
| 75 | Removing U/S 5 star base and S&F new SS 5 star base suitable for chair computer. |
| 76 | Removing U/S castor twin wheels and S&F new castor twin wheel suitable for chair computer. |
| 77 | Removing U/S adjustable tilting mechanism and S&F new adjustable tilting mechanism shall be forward tilt, self regulating tilt tension and manual override, 4 position tilt lock. Anti shock back mechanism to prevent backrest. 360 swivel mechanism to allow with fluid lateral movement suitable for chair. |
| 78 | M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chair Computer paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). |
| 79 | BED HARD WITH PLYTOP : (FD/MAP/E6/08 (R) |
| 80 | M & L 18 mm thicik Prelaminated MDF, exterior grade, prelaminatedboth side with decorative choice lamination of size 630 X 185 mm, screwed to MS strip, arc welded to 18mm size rectangular pipe as in head board of Bed hard with plytop including taking out old unserviceable head board complete all as specified and directed. |
| 81 | M & L 18 mm thicik Prelaminated MDF, exterior grade, prelaminatedboth side with decorative choice lamination of size 630 X 310 mm, screwed to MS strip, arc welded to 18mm size rectangular pipe as in foot board of Bed hard with plytop including taking out old unserviceable foot board complete all as specified and directed. |
| 82 | M & L 45 X 20 X 5 mm size MS flat iron for fixijng head/foot board, arc welded to rectangular pipe of bed hard, apply two coats of synthetic enamel paint over a coat of red oxide primer to MS flat after welding including taking out old unserviceable MS strip of any size complete all as specified and directed. |
| 83 | M & L 25 X 25 X 1.25 mm thick MS square tube, 850mm long, as in stiffner of bed hard, welded to long rail apply two coats of synthtic anamel paint over a coat of red oxide primer to MS pipe after welding including taking out old unserviceabnle MS pipe of any size complete all as specified and directed |
| 84 | M & L 12 mm thick ply wood to BWR grade confirming to IS:303 as in bed hard screwed to stiffner including taking out old unserviceable plywood complete all as specified and directed by Engineer-in-Charge |
| 85 | S & F rubber shoes suitable for 38 X 38 mm MS square tube as leg of bed hard complete all as specified and directed. |
| 86 | Supply only GI nut and bolt of size of 75mm X 7mm, conforming to IS.1239 (Part II) 1982, all as specified. |
| 87 | M & L preparation of old treated steel surfaces of bed hard MAP as per drawing and applying a coat of synthetic enamel black paint complete all as specified. |
| 88 | SHOE RACK STEEL : FD-E6/MAP/02 ® S & F following components of shoe rack including dismantling taking out carefully & replace old components of Shoe Rack. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 400 |
| 89 | Main frame of Rack shoe steel 25mm dia pipe |
| 90 | 3mm dia MS wire mesh (9 Nos,equidistant)and 3mm dia MS wire (3 Nos,equidistant) size 700mm x 300mm. All as shown on drg. |
| 91 | PVC Shoe |
| 92 | Welding work wherever required as directed by EIC |
| 93 | M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Shoe Rack Steel paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). |
| 94 | DRESSING TABLE (LADIES) INCLUDING STOOL FD/MAP-II/07 Dismantle, take out carefully & replace old components of table dressing ladies. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. |
| 95 | Replacement of handle with S&F new chromium plated handle as approved by the Engineer-in-Charge of best quality. |
| 96 | M & L for replacement of U/S sliding channel. |
| 97 | M & L for replacement of U/S 6mm thick back ply wood of mirror. (Make of Ply :-Greenply/ Century/ Duro) |
| 98 | Replacement of back of table dressing ladies with S&F new back of table dressing ladies with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked. (Make:- Century or equivalant as approved by GE). |
| 99 | Replacement of broken top of table dressing ladies of any description with S&F newtop oftable dressing ladies with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 3mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE). |
| 100 | Replacement of side of table dressing ladies with S&F new side of table dressing ladies with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked. (Make:- Century or equivalant as approved by GE). |
| 101 | Replacement of door shutter of table dressing ladies with S&F new door shutter of table dressing ladies with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked. (Make:- Century or equivalant as approved by GE). |
| 102 | Replacement of drawer of table dressing ladies with S&F new drawer as per Drg |
| 103 | Replacement of wheels of Stool dressing with S&F new wheels as per Drg |
| 104 | Replacement of hinges of table dressing ladies with S&F new hinges as per Drg |
| 105 | S & F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed. |
| 106 | Replacement of cushion of Stool dressing with S & F PU foam cushion with 40 Density(Make- Sleepwell/Godrej/Kurlon) with Tapestry cloth as approved by EIC/GE of rate not less than Rs 250/RM. |
| 107 | Removing of old U/S looking mirror from table dressing ladies and S & F new looking mirror 5mm thick (make - Modi gurard/Saint Gobin) made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge/ GE. |
| 108 | Polishing one coat to old and two coats to new surfaces to table dressing ladies with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 109 | CHAIR VERANDAH:- FD-19, FD-359, FD/MAP-II/06S & F following components of Chair Verandah including dismantling taking out carefully & replace old components of Chair Verandah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. |
| 110 | Removing the existing U/S cane/niwar plastic from the seat and back of chair and recanning the seat and backof chair with plastic cane 3.5mm to 4mm wide of 1st quality, white colour in pure godrej pattern. The canning of chairs shall only be carried out after complete painting process as specified in drg. MAKE OF CANE- SHAH, PREMIER |
| 111 | Removing the existing U/S/broken PVC seat and back from the chair verandah MAP, S & F new PVC seat and back 4mm thick to the chair verandah MAP after providing flat iron 20mmx4mm support in centre of seat only by proper welding for support of PVC seat.The PVC seat shall got approved from GE before supply. MAKE OF PVC SEAT –AMKO/ COMFO/ HARMONY |
| 112 | Replacement of legs of chair varandah with S&F new legs made out of 16 Gauge MS sheet complete all as shown on drg, specified and directed. |
| 113 | Welding work wherever required as directed by EIC |
| 114 | Removing the old broken shoes of chairs and S & F best quality new PVC shoes to the legs of chair. |
| 115 | M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chair Varandah paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). |
| 116 | CHAIR DINING OFFICER (MAP) FD/MAP-II/04 ,FD-E6-MAP-10 Dismantle, take out carefully & replace old components of chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. |
| 117 | Removing old broken/U/S front legs from chair dining and S & F new front legs of Ist class hard wood teak wood as per shape and size shown in drawing complete all as specified and directed. |
| 118 | All as per srl item No. 16.01 here-in-before but rear leg. |
| 119 | All as per srl item No. 16.01 here-in-before but front/ back/ side rail. |
| 120 | All as per srl item No. 16.01 here-in-before but back teak wood strip of size 30x15mm of suitable length. |
| 121 | All as per srl item No. 16.01 here-in-before but stiffner. |
| 122 | S & F new wooden bracket/corners of suitable size made of Ist class hard wood teak to Chair dining cushioned and screwd with railing for extra strength including lacquer polish complete all as directed. |
| 123 | Removing oldU/S PU foam cushioned seat from existing chair dining cushionedand S & F new 75 mm thick ,40 density PU foamseat of (Make- Sleepwell/Godrej/Kurlon) to chair dining duly covered with tapestry cloth of range not less than Rs.250.00 per meter, colour, shade and quality of tapestry Clothshall be as approved by EIC & GE complete all as specified and directed. |
| 124 | Polishing one coat to old and two coats to new surfaces to Chair Dining Officer (MAP) with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 125 | SOFA SET 4 SEATER : FD-281/373 |
| 126 | M & L for supply of new cushions for sofa set 4 seater (set consisting of 08cushions) of size 560 X 530 X 100 mm thick 40 dencity of make sleepwell or equivalent as approved by GE and duly covered with tapestry cloth costing not less than Rs. 300/- per mtr over a cover of lling cloth complete all as specified and directed. |
