|
| 1 | Dismantling floor, hearth or wall tiling incl cement mortar bedding, taking down complete moasic dado and removing rubbish of the premises all as specified and directed by Engr-in-Charge. |
| 2 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.16 sqm, in floors etc, and cement screed in CM 1:6 (1 cement 6 river sand), 15mm thick and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. |
| 3 | M & L for glazed coloured ceramic tiles in vetical surfaces of size 450mmx300mmx7mm thick laid over 10mm thick back coat in CM 1:4 (1 cement 4 river sand), set and jointed in neat cement slurry and pointed in white or colour cement to matchthe colour of tiles, complete all as specified and directed. |
| 4 | Demolition of cement concrete (reinforced) as in roof, floors (other than ground floor) beams, staircase, landing, chajjas and similar suspended work complete and removing rubbish of the premises all as specified and directed by Engr-in-Charge. |
| 5 | M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 (1 cement 4 river sand)complete all as specified and directed. |
| 6 | M&L for reinforced Cement Concrete 1:2:4 type B1 (using 20 mm graded aggregate and river sand) as in Cover slab for manholes etc set in cement mortor 1:4 (1 cement 4 river sand) including use and waste necessary form work (Reinforced shall be measured and paid seprately) all as specified and directed. |
| 7 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar 1:4 (1 cement 4 river sand) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 8 | Supply and fixvitreous china wash basin, white, ovel shape size 550 x 400mm , 01 No. fancy type chramium plated piller tap, CP stop cock & 450mm long PVC connection,01 Nos 32mm waste coupling and pipe, , including cuttingGranite slab for placing wash basin nosing edges complete all as specified and directed |
| 9 | M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 10 | All as per item No 9 above but 5mm dia and over upto and incl 10 mm dia in spacers, stirrups and binders complete all as specified and directed. |
| 11 | Taking down 15mm bore steel tubing and connections in any position, Complete all as specified and directed. |
| 12 | Taking down 20mm bore steel tubing and connections in any position, Complete all as specified and directed. |
| 13 | Taking down 25mm bore steel tubing and connections in any position, Complete all as specified and directed. |
| 14 | Taking down 50mm bore steel tubing and connections in any position, Complete all as specified and directed. |
| 15 | Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 (1 cement 3 river sand) for concealed water tubing, etc.& making good, cutting not exc 10 cm grith |
| 16 | Supplying and fixing of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including provision of special fittings ( Unions, elbow, Tee, Male threaded brass adaptor, Female threaded brass adaptor, Tank adaptor etc), complete all as specified |
| 17 | M&L for 20 mm bore GI Tubing medium grade with all fittings fixed to wall/ ceiling or in floor complete as specified and directed. |
| 18 | M&L for 25 mm bore GI Tubing medium grade with all fittings fixed to wall/ ceiling or in floor complete as specified and directed. |
| 19 | S & Fin repair 15mm bore Bib taps, chromium plated cast copper alloy fancy type, screwed down, screwed for iron pipe or for brass ferrule complete allas specified and directed. |
| 20 | S&F in repairs 15 mm diafancy type stop cock/ angle cock chromium plated screwed down, high pressure,screwed both ends for iron pipe or for unions and fixed complete allas specified and directed. |
| 21 | S&F in repairs 15 mm diafancy type conceled stop valves/ angle cock chromium plated screwed down, high pressure,screwed both ends for iron pipe or for unions and fixed complete allas specified and directed. |
| 22 | S & F in repair 125mm size brass chromium plated shower rose with arm or without swivel joints including fixing to steel pipe or union fixed complete all as specified and directed. |
| 23 | S & F PVC connections 15 mm size with PTMT nuts of length600 mm complete all as specified and directed. |
| 24 | S & F in repairs, vitreous china Squatting panOrissa pattern of size 580mx440mmwith integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete, all as specified and directed. |
| 25 | S&F in repairs wash down water closet (pedestal pattern) complete white withplastic water closet seat black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete all as specified and directed. |
| 26 | S & F in repair vitreous china bowl urinal flat back size of 465 x 355 x 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern & flush pipe) but excluding waste pipe, complete including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement complete all as specified and directed. |
| 27 | S & F in repairPVC valveless syphonic action type low levelflushing cistern 10 Ltr capacity with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia all as specified and directed |
| 28 | S&F GI tube 50mm dia medium graded with all fitings and fixed to wall, celing or laying in trenches including taking up and down complete all as specified and directed by Engr-in-charge. |
| 29 | S&F in repair50mm bore dia Gun metal Gate valvewith iron wheel head screwed both endsfor iron pipe or for union, complete all as specified and directed. |
| 30 | S&F in repair20mm bore dia Gun metal Gate valvewith iron wheel head screwed both endsfor iron pipe or for union, complete all as specified and directed. |
| 31 | S&F in repair25mm bore dia Gun metal Gate valvewith iron wheel head screwed both endsfor iron pipe or for union, complete all as specified and directed. |
| 32 | S&F 600mmx450mm belvelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with PVC / alluminium frame and fixed to wooden plugs with chromum plated brass screws, cup washers, complete all specified and directed. |
| 33 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc and removing rubbish of the premises all as specified and directed by Engr-in-Charge. |
| 34 | M & L for brick work with sub-class `B\" bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 (1 cement 6 river sand) complete all as specified and directed. |
| 35 | Taking down cement plaster any descriptionon brick or stone walls,roof plaster etc including raking out joints,hacking for key, scrubbing down with water, complete all as specified and directed. |
| 36 | M&L for10mm thick in CM 1:6 (1 cement 6 river sand) rendering on brick or concrete surfaces finished even and smooth (without using extra cement), complete all as specified and directed. |
| 37 | M & L for rendering 15mm thick in two layers (10+5) cement mortor 1:4 (1 cement 4 river sand) on Brick wall surfaces, finished even and smooth without using extra cement with @ at 3% IWPC (IWPC measured separately) complete all as specified and directed. |
| 38 | M&L for Rendering 5mm thick in CM 1:3 (1 cement 3 river sand) as in ceilings concrete surfaces finished even and smooth (without using extra cement), complete all as specified and directed. |
| 39 | Supply only integral water proofing compound. |
| 40 | M&L for Preparation of new plastred wall surfaces and apply three coats of white wash, complete all as specified and directed. |
| 41 | M & L preparation of new surfaces of walls plastered or unplastered etc and applying two coat of cement basedpaint on wall surfaces as specified and directed by Engr-In-Charge. |
| 42 | M&L for preparation of new ceiling surfaces and applythree coat of white wash, complete all as specified and directed. |
| 43 | Complete removal of existing treatment of old wall surfaces and applying three coats of white wash, complete all as specified and directed. |
| 44 | Complete removal of existing treatment of old ceiling surfaces and applying three coats of white wash, complete all as specified and directed. |
| 45 | Supply and Fix PTMT Shelf of weight not less than 300 gms with soap dish (tray) fixed with and including Chromium plated brass screws and wooden / plastic cleats etc., complete all as specified and as directed. |
| 46 | S & FPVC( SWR ) pipes 110mm dia single socketed , in any lengthwith rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall including taking down existing pipe complete all as specified and directed. |
| 47 | S & F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down existing pipe complete all as specified and directed. |
| 48 | S & FPVC( SWR ) pipes 75mm dia single socketed , in any lengthwith rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to walls including taking down complete all as specified and directed. |
| 49 | S & FPVC( SWR ) pipes 75mm dia single socketed , in any lengthwith rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) laid in trenches including taking down complete all as specified and directed. |
| 50 | S&F in repair PVC (SWR) bends any radius 110mm bore complete all specified and directed. |
| 51 | S&F in repair PVC (SWR) bends with access door any radius 110mm bore complete all specified and directed. |
| 52 | S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 110mm complete all specified and directed. |
| 53 | S&F PVC (SWR) branch piece, double (double Y) equal or unequal of bore 110mm complete all specified and directed. |
| 54 | S&F PVC(SWR) vent cowl 110mm bore complete all specified and directed. |
| 55 | S&F PVC (SWR)bends any radius 75 mm dia complete all specified and directed. |
| 56 | S&F PVC (SWR)bends with access door any radius 75 mm dia complete all specified and directed. |
| 57 | S&F PVC (SWR) junction single (single T) equal or unequal of bore75mm complete all specified and directed. |
| 58 | S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore75mm complete all specified and directed. |
| 59 | S&F in repair PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all specified and directed. |
| 60 | S&F for PVC waste pipe for Sink/WHB/Urinal with fitting etc 38 mm dia. 60mm long complete all specified and directed. |
| 61 | Taking down chowkats with shutters (without taking off shutters from the frameexc 1.5 Sqm and n.exc 4 Sqm each and offered as credit. |
| 62 | All as per item No 61 above here in before but n exc 1.5 Sqm |
| 63 | Supply and fixing powder coated aluminum frame for windows, window shutters, ventilators, grills and Sliding windows and window grills, including necessary joining cleats, rubber packing, handles, hinges, locking arrangement for sliding windows, screws etc. complete all as specified all as specified |
| 64 | Supply and fix sheet glass 4.8mm thick and glazing with oil putty/ alu beads n.exc. 0.50sq.m. each pane (alu beads will be measured under alu doors/ windows) complete all as specified and directed. |
| 65 | Material and labour Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed withn wooden beading or with nuts and bolts to existing steel windows/wooden windows complete all as specified and directed. |
| 66 | Material and labour Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specificationall as directed. |
| 67 | Material and labour Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck insid complete all as specified and directed. |
| 68 | Supply and Fix 100mm Butt hinges, extruded Aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-22 complete all as specified and directed. |
| 69 | Supply and fix Alluminium, 150mm anodized, barrel tower bolts extruded section & fixed complete all as specified and directed. |
| 70 | Supply and fix Extruded aluminium alloy handles,150mmfabricated type anodized complete all as specified and directed. |
| 71 | S&F Pressed steel frames 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied & fixed complete all as specified and directed. |
| 72 | Material and labour IInd Class hard wood 35mm Double/Single Flush door shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed. |
| 73 | S&F Alluminium, 200mm anodized, barrel tower bolts extruded section & fixed complete all as specified and directed. |
| 74 | Supply and fixing 300mm Mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, four on bolts plate & two on staple plate & fixed complete all as specified and directed. |
| 75 | M & L Preparation of New or previously untreated steel Surfaces of any description, not otherwise described, over 10cm width or grith applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 76 | M & L Preparation of New or previously untreated wooden Surfaces of any description, not otherwise described, over 10cm width or grith applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 77 | S&F 150mm Floor door stopper of aluminum alloy body & tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 78 | Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc or for shafts wells, cesspits, manholes, pier holes etc not exc 10sqm on plan and getting out in hard/dense soil complete all as specified and directed. |
| 79 | M&L for PCC type D2 1:4 (1 cement 4 river sand):8 (using 40mm graded stone aggregate) as in foundations, filling and mass Concrete complete all as specified and directed. |
| 80 | Demolition of cement concrete (unreinforced) of any description of any position not otherwise specfically provided for as in sunken floors & floor etc complete all as specified and directed. |
| 81 | M&Lcement concrete type E-2, 1:5:10 (40mm graded stone aggregate) as in mass fillings complete all as specified and directed. |
| 82 | Supply and FixDouble walled corrugated pipes of outer dia 160mm and inner dia 136mm, SN-18 pipes confirming to IS 16205(Part 24- 2018)/ IS 14930 including all necessary special fittings, cutting & jointing complete all as specified and as directed. |
| 83 | Returning filling in , including spreading n exc 25 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 84 | Earth work in excavation in soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 85 | Spreading and levelling in layers n exc. 25 cm thick Add for well ramming including watering as required complete all as specified and directed by Engr-in-Charge. |
| 86 | M&L for brickwork with sub class B bricks in one brick thick honey comb work built in cement mortar 1:6complete all as specified and directed by Engr-in-Charge. |
| 87 | M&L for brickwork with old sized bricks laid dry in circular well steining (any radius) constructed from the base or curbcomplete all as specified and directed by Engr-in-Charge. |
| 88 | M&L for Mild Steel TMT Bars 6 to 8mm dia bars cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm diacomplete all as specified and directed by Engr-in-Charge. |
| 89 | M&L RCCinBeams , cantilevers, bressummers, lintels etc. Type B1 1:2:4using 20mm graded aggregate (Nominal mix) |
| 90 | M&L for RCC 1:2:4 type B1 using 20mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge. |
| 91 | M&L for RCC 1:2:4 type B1 using 20mm graded aggregate as in shelves,chajja and the like complete all as specified and directed by Engr-in-Charge. |
| 92 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) finishing rough finshined flat surface of concrete complete all as specified and directed by Engr-in-Charge. |
| 93 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. finishing rough finished surface of concrete complete all as specified and directed by Engr-in-Charge. |
| 94 | Formwork to chullah hoods, chajjas, troughs and similar items including edgesfinishing rough finshined surface of concrete complete all as specified and directed by Engr-in-Charge. |
| 95 | M&L for Hard core broken stone of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge. |
| 96 | M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection, finished even and smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge. |
| 97 | M&L for 75 mm thick plain cement concrete 1:4:8 type D2 using 40mm graded aggregateas in sub base complete all as specified and directed by Engr-in-Charge. |
| 98 | M&L for 15 mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6complete all as specified and directed by Engr-in-Charge. |
| 99 | M&L for non skidceramic colour tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 Sqm but not exc 0.11 sqmin floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles complete all as specified and directed by Engr-in-Charge. |
| 100 | M&L for10mm thick in CM 1:4 rendering/backing coat for skirting/dado on brick or concrete surfaces rough finished complete all as specified and directed by Engr-in-Charge. |
| 101 | M&L for glazed ceramic coloured tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge. |
| 102 | S&F steelventilator with top hung double shutter including hinges, steel peg stay complete all as specified and directed by Engr-in-Charge. |
| 103 | S&F 3mm thick sheet figured glass, pin head type and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete complete all as specified and directed by Engr-in-Charge. |
| 104 | S&F Vitreous china Urinal bowl flat back , size of 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete as directed complete all as specified and directed by Engr-in-Charge. |
| 105 | S&F 32mm Dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid for wash hand basin waste pipe complete all as specified and directed by Engr-in-Charge. |
| 106 | S&F Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 litres complete all as specified and as directed by Engineer-in-charge. |
| 107 | Supplying and fixing of 15mm dia steel galvanised water tubing medium grade fittings on walls/ceiling or laying in floors complete all as specified and directed by Engr-in-Charge. |
| 108 | S&F PP-R Gate valves (brass insert) as per requirement of the site screwed both ends to pipes of 20mm bore fixed complete. |
| 109 | S&F of Ball valves high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed to 20mm bore pipecomplete all as specified and directed by Engr-in-Charge. |
| 110 | M&L priming plastered roof surfaces with bituminous primer @ 0.3 Kg/sqm as per IS-3384 and providing water proofing treatment by applying mineral finish 3.5 Kg/sqm actatic polypropylene (advanced App torch membrane with fiber glass and finished on top with fiber glass mineral states torch incistern of thickness 3 mm by torch bonding complete over and including rendering 10 mm thick in CM 1:4 on concrete surfaces of roofs parapet etc, finishing to surfaces even and smooth with out using extra cement and providing necessary slope incl using WPC @ 3% or as per manufacturer instructions |
| 111 | S&F PVC (SWR) vent cowl 75mm borecomplete all as specified and directed by Engr-in-Charge. |
| 112 | S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cementcomplete all as specified and directed by Engr-in-Charge. |
| 113 | M&L salt glazed stone wave gully traps square or rounded mouthed type & fix 150 x 150 mm fixed in cement concretecomplete all as specified and directed by Engr-in-Charge. |
| 114 | Cutting in to existing manholes for connecting new drains making good to pipe 100mm internal dia and rendering cutting out existing benching for and forming branch channels (1/2 round or 3/4 section)in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate finished smooth and reforming benching complete all as specified and directed by Engr-in-Charge. |
| 115 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 116 | M & L for providing point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLSH unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and includingnon metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for concealed wiringon stone/brick, masonary walls, roof etcincluding modular sunken box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators, light fittings etc. complete with all fittings and accessories fixed to wall/ ceiling for one light/ fan /bell point controlled by one oneway modular switches including one run 1.5 sqmm (nominal area) PVC insulated FRLSH unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified & directed at site.Note : Cutting/running chases, pinning in shall be measured seperately for concealed point wiring ( One Concealed Point wiring shall be measured as 2.5 RM Cutting/running chases, pinning in. |
| 117 | All as per ser item No 116 here in before but for one 3 pin socket outlet 5 Amp on same board. |
| 118 | All as per ser item No 116 here in before but for one 3 pin socket outlet 15 Amp independent board using cable of size 4.0 sqmm. |
| 119 | S&F Modular switch, single pole, one way, 6Amps one module complete all as specified and as directed. |
| 120 | S&F Modular 6A 3 pin universal socket outlet, 2 module complete all as specified and as directed. |
| 121 | S&FModular switch, single pole, one way, 16Amps one module complete all as specified and as directed. |
| 122 | S&F Modular socket outlet 2-in-1, 6/16 Amps, 2 module complete all as specified and as directed. |
| 123 | S&F lamp holder insulated body with back plate suitable for battern fittings complete all as specified and directed at site. |
| 124 | S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminals complete all as specified and directed at site. |
| 125 | S&F 9 W LED bulb of base B22d with color temp 6500K all as specified and directed. |
| 126 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 127 | Supply and fix RCBOs SPN 32 Amp, 240 volts 50Hz AC supply, complete all specified and directed. |
| 128 | Supply and fix Sheet metal enclosure IP-43 double door for DBs(where MCBs arereqd) SPN 240 V, for 04 ways, complete all as specified. |
| 129 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of Single poleand current carrying capacity (SP)6-32Ain the MCB DB complete with connection testing and commissioning. |
| 130 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380mm sweep with, blades, and frame and louvers |
| 131 | Earthing complete with galvanized steelearth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead complete all as specified and directed by the Engr-in-charge. |
| 132 | Supply and fixing LED Bulding Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed. |
| 133 | M&L for Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 6 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 6.0 Sqmm as earth lead in and including PVC conduit medium gradewith all fittings suitable for concealed type complete all as specified and directed. |
| 134 | Supply and fix in repair LED lights fitting 1x 20W, 220V, AC decorative box type with powdered coated aluminium housing & integrated electronic driver with THD<10%, 4KV surge protection and 130 lumen/watt including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 135 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor of size 10 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen- ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and directed at site. |
| 136 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m depth and getting out in soft/loose soil all as specified and as directed. |
| 137 | Removing excavated materials to a distance not exc 50 M and depositing where directed at level not exc 1.5 M above the starting point all as directed. |
| 138 | S&F galvanized steel water tubing medium grade of50mm bore complete with all fittings such asbends elbows, tees, short pieces, connectors, back nuts, diminishingpieces, caps and pigs, unions including taking up or down existing steel tubing with fittings all as specified and directed. Make : JINDAL/TATA/ZEENATH |
| 139 | S&F in repairs gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of 50mm bore including taking down complete all as specified and directed. MAKE : LEADER/ZOLOTO |
| 140 | Cutting/Boring on the existing CI/GI/DI pipe line of any sizes and reducing to required length before laying and insertion of Ts of 80x80x50mm and branches for 50mm all as specified and as directed. |
| 141 | S&F galvanized steel water tubing medium grade of20mm bore complete with all fittings such asbends elbows, tees, short pieces, connectors, back nuts, diminishingpieces, caps and pigs, unions including taking up or down existing steel tubing with fittings all as specified and directed. Make : JINDAL/TATA/ZEENATH |
| 142 | Cutting/Boring on the existing CI/GI/DI pipe line of any sizes and reducing to required length before laying and insertion of Ts of 50x50x20mm and branches for 20mm all as specified and as directed. |
