|
| 1 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as reqd. |
| 2 | Providing and laying earth connection from earth eletrode with 6 SWG dia G.I. wire in 15mm dia G,I, pipe from earth electrode including connection with G.I. thimble excavation and re-filling as reqd. |
| 3 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as reqd. |
| 4 | Laying of one number PVC insulated and XLPEsheathed power cable of 1.1 Grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required |
| 5 | Upto 35 sq mm |
| 6 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and XLPE sheathed aluminium conductor cable of 1.1 KV grade as reqd. |
| 7 | 4x16 sq mm |
| 8 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator) |
| 9 | 6 Way Double Door |
| 10 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps |
| 11 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 12 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part Il complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 13 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 14 | Supply, installation, testing and commissioning of pre-wired, 150 watt, street light delievering 120 lumens/watt, IP 66 protection, PDC housing and high impact resistance (IK07) glass cover lumimiare 220-220V, 50 hz on existing street light pole/wall including all accessories and connection etc as required. (Philips make, Cat no. BRP335 LED180 CW R5C FG PSU S1 V1 or equivalent Model of Thorn/Trilux) |
| 15 | Supply, Installation, testing and commissioning of pre-wired 35 watt, IP 65, Post top lantern light have symmetric light distribution , 220-240 V, 50 Hz complete i/c all accessories etc. directly on surfaceincluding connection with 1.5 sq mm FRLS PVC insulated, copper conductor cable and earthing etc. as required (Make: Philips Uniscape Model, Cat No. BGP200 LED35 CW PSU GR CPC SPD or equivalent model of Thorn/Trilux) |
| 16 | Supplying of one number PVC insulated and PVC sheathed/XLPE aluminium conductor armoured power cable of 1.1kV grade of size 4 x16 sqmm etc as required |
| 17 | Supplying of one number PVC insulated and PVC sheathed/XLPE copper conductor un armoured power cable of 650/1100 kV grade of size 3C x 2.5sqmm etc as required |
| 18 | Servicing / cleaning the panel/feeder pillar with air blower i/c rubbing the corrossion, painting the panel with two or more coat i/c dressing the cables etc. complete as reqd. |
| 19 | Supply, installation, testing and commissioning of pre-wired, 150 watt, Flood light Pressure die-cast aluminium housing with high impact resistance (IK07) glass cover IP 66 protection, 130 lm/w, 220-240 V, 50 Hz on existing street light pole/wall including all accessories and connection etc as required. (Philips make, Cat no. BVP 192 LED 177 CW NB FG A1PSU GR or equivalent Model of Thorn/Trilux) |
| 20 | Supply, Testing and commissioning of foolowing size HOT dip galvanized octagonal steel pole made out of 3mm thick sheet PCD 200 mm, having bottom 130mm A/F & top 70mm A/F with built in connector box of size 500 mm length, M.S. base plate of size 200mm x 200mm x12mm thickto accommodate the fittingon existing RCC foundation i/c S/F of 4 Nos. M-16 x 450mm long J Type (EN-8 grade) G.I. foundation bolts & nuts with 3 Nos. and 2 Nos. washer along with suitable size templates, making connections, interconnections with suitable size of copper wire with timble/lugs in the connection box, earthing, making numbering of pole etc complete as per drawing & technical specifications attached including following accessories mounted on inbuilt control box having flush cover with 2 Nos mounting strips with tapped holes(a) 6mm thick pheenolic laminated sheet/ bakelite sheet inside the window mounted on the existing mounting strips inside the flush door( b) S/F of Teriminalblock suitable for 16 sq. mm conductor4 Nos. & shorting links - 5 Nos. on DIN Chneels(c) Terminal suitable for 6 SWG GI Wire/ 1.5 sq. mm wire (d) 6Amp SPMCB 10 KA \"C\" Series - 1 No. i/c mounting on DIN Channel. This includes making of foundation of size 1200 mm x 400mm x400mm made of cement concrete 1:3:6 (1 cement : 3 course sand : 6 graded stone aggregate 40 mm nominal size) with provision of IN and OUT slot for cable entry including excavation of and refilling etc. as required(Make : Bajaj/ Transrail/Jindal/Tata) |
| 21 | 5 Meter height |
| 22 | Supplying and Fixing of 500 mm longOver hang following arm bracket made out of suitable dia G.I. pipe and suitable for 70 mm dia G I Pole includingnut bolts etc as required (Make: Bajaj/ Transrail/ Jindal/ Tata |
| 23 | Double Arm Bracket |
| 24 | Single Arm Bracket |
