|
| 1 | Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections. (Excluding GST) |
| 2 | Filling of grade -1 granular sub-base with well graded material, complete as per technical specification clause 401. (Excluding GST) |
| 3 | Providing concrete for plain/reinforced concrete 1:3:6 in open foundations complete as per drawings and technical specifications As per SOR 279(a) (Excluding GST) |
| 4 | RCC Grade M30 Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications (Excluding GST) |
| 5 | RCC Grade M35 Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications (Excluding GST) |
| 6 | Supplying, fitting, and placing MS bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 (Excluding GST) |
| 7 | Back Filling Behind Abutment , Wing Wall and Return Wall complete as per drawing and Specification (Excluding GST) |
| 8 | Dismantling brick work or stone work in lime or cement mortar and including stacking of material as directed by the Engineer in charge within a distance of 60 m (200 ft.) (Excluding GST) |
| 9 | Dismantling reinforced cement concrete or reinforced brick work including stacking of material as directed by the Engineer in charge within a distance of 60 m(200 ft.) (Excluding GST) |
| 10 | Earthwork in embankment for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.( 30 Mt Lead and 150 M Lift) S.I. No 251 (Excluding GST) |
| 11 | Laying brick soling on prepared sub-grade with brick on end edging according to lines,graded and cross-section shown on the drawing filling joints with sand and earth,spreading 25 mm thick layer of earth over brick soling,watering and rolling. (Excluding GST) |
| 12 | Providing and laying grade -1 granular sub-base with well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. (Excluding GST) |
| 13 | Providing and laying spreading and compacting stone aggregates of specific sizes 45-63 mm to water bound macadam specification incluidng spreading in uniform thickness hand packing rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber applying and brooming stone screening /binding materials to fill-up the interstices of coarse aggregate watering and compacting to the required density grading -2 as per technical specification clause 405 (Excluding GST) |
| 14 | Providing and laying spreading and compacting stone aggregates of specific sizes 22.4-53 mm to water bound macadam specification incluidng spreading in uniform thickness hand packing rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber applying and brooming stone screening to fill-up the interstices of coarse aggregate watering and compacting to the required dencity as per technical specification clause 405 (Excluding GST) |
| 15 | Brick edging on both sides of the road of first class bricks 8 cm (3\"\") wide and 12 cm. ( 4.5\") deep laid with mud mortar including labour & supply of bricks finish to the required template and in proper alignment and also including dressing ramming the excavated earth as directed by Engineer-in-charge. (Excluding GST) |
| 16 | Providing and applying Primer coat with bitumen emulsion on prepared (SS-1) on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.70 kg / sqm using mechanical means. As per technical specification clause 502 (Excluding GST) |
| 17 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.35 kg per sqm on the prepared bituminous granular surface cleaned with mechanical broom. (Excluding GST) |
| 18 | Providing, laying and rolling of open-grade premix carpet of 20 mm thickness composed of 13.2mm & 11.2mm using VG-10 bituminous binder @ 1.46 kg/Sqm. H.P.C./I.O.C. make complying with IRC:SP 53 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C including cost of all materials, labour, T&P etc. required for proper completion as per Technical Specification Clause 508 of MORD specification. (Excluding GST) |
| 19 | Providing and applying seal coat type \"C\" comprising of a layer of bituminous binder followed by a cover of stone chipping of specified grading and rolling with power roller 8-10 tonne kN Static roller and finishing to required level and grades as per Technical Specification Clause 510 (Excluding GST) |
| 20 | Earth work in Patri or embankment in ordinary soil loam, clay or sand in patries on both side of road including ramming dressing required to proper completion of work including all labour T&P etc all complete. as per S.I. NO. 253 (Excluding GST) Please Enable Macros to View BoQ information |
