Tender For Furnishing Work And Electrical Work Of Branch At: DESCRIPTION QTY. UNIT RATE AMOUNT (RS) A. FURNISHING WORKS: 1(i) Providing & Fixing false ceiling at 9’-0” ht. (as per drg.) of India Gypsum Ltd. (GMFSC-4.1) using 12.5mm thick Gypboard, paper tape, jointing compound, G.I. Sections marked “Gypsteel” to be placed at 4’-0” C/C in one direction and at 1’-6” C/C in other direction. The false ceiling shall be finished properly after cutting / making holes for fixing light fixtures including three coats of oil bound distemper paint etc. complete as per drgs. 500 Sqft. ii Making Cove in Gypsum Board Ceiling 120 Rft. (iii) PPGI METAL SHEET FALSE CEILING: Providing & fixing in position false ceiling in Armstrong 600 x 600 mm PPGI Metal microlook lay-in standard perforated tiles silhouette 38 made of 120 gsm pre-painted galvanised iron, Grade-GPL as per IS277 (2018) with coating durability as per IS 4246 color as approved by Bank/architect with 15mm exposed grid system (Grid frame shall have black groove at bottom) by Armstrong Co. with suspenders. Making necessary framework for A.C. ducting, if any, and necessary cutouts for diffusers and light fittings, taping and finishing to proper line & level, including making grooves and trap doors for A.C unit . 500 Sqft. 2 TOUGHENED GLASS DOORS & PARTITION (for entry): Providing & fixing 12 MM thick toughened glass for door and fixed glazing, with complete patch fittings such as handles, lock and L-brackets etc. The job shall also include etching design/film. i Entrance glass. 320 Sqft. ii Floor spring for toughened glass 4 Nos 3 Providing and fixing Aluminum frame partition made of internal frame of 1 ½” x 2.5” Alum. sections placed at 2’-0” c/c vertically and horizontally finished with 6mm thick Bison Board/commercial ply on both sides finally finished with 1.00 mm thick laminate on both sides with horizontal grooves. These partitions shall have 5.00 mm thick glass (etching as per design) above 2’-6” ht. or 4’-0” ht with beading ½”x1 1/2” . The rate of partition shall include providing & fixing door in partitions made as per the specifications of partition, but with complete hardware required such as latches, stopper. The low ht. partition shall have rubber-wood / teak-wood gola of size 3” x ¾” which shall be polished as per shade reqd. 3(i) Low ht. partitions with 12 mm thick glass. 100 Sqft. (ii) Full ht. partitions with/without 5 mm thick glass. 120 Sqft. (iii) a) Cash-Cabin’s pts (7’-3” high) 70 Sqft. (iv) b) Cash cabins’ as well as single windows’ front 30 Sqft. ptn. with 12mm th. Glass. (v) Partition in strong room. 70 Sqft. (vi) Rear partition. 60 Sqft. (vii) Cost Mortice locks (with handles) 4 No (viii ) Cost of Multipurpose locks for storages, drawers etc. 30 No (ix) Cost door closers. 4 No (x) Cost floor springs. 0 No (xi) Cost of Knight Latches 1 No 4(i) P/F wall paneling on soft Alum. frame sections 1x2 placed @ 2’-0” c/c horizontally & vertically @ 1’-0” C/C, finished with 6mm thick commercial ply/Bison board finished with 1.00 mm thick laminate as per design, the paneling shall be closed with 2” x 1” rubber / teak / nu-wood beading 850 Sqft. (ii) Pin-up board finished with cotton cloth & rubber wood beading. 50 Sqft. 5(i) Banking Counters with 1½” thick post-form factory made Tops: Providing & fixing Banking Counters (SW) as per design, 2’-6” ht. & 3’-3” ht. (2 heights). The banking counters shall have the provision to adjust the key board, drawer, storage complete (full length & width) shelf for CPU at bottom and foot rest. The banking counters shall be made of 19mm thick commercial board, with rubber -wood Gola of size 1½ ”x ¾ ”, which is to be polished as per color scheme. The counter shall be finished externally and internally with 1mm thick laminate of approved shade / colour, handles, magnet catchers, hinges. Inside of drawers, storage cabinet portion shall also be finished with 8mm thick laminate of approved color. 4 Rft. 6 Tables with 1½” thick post-form factory made Tops: Providing & fixing office tables with/without drawer and storage below of size 2’-4½” (wide) or as mentioned, 2’-6” (high) with the provision of key board, with sliding channels of Ebco, complete (full length & width) shelf for CPU at bottom and foot rest. The table shall be made of 19mm thick commercial board; 1mm thick laminate on (inside & outside) with rubber -wood gola of size 1 ½” x 3/4 ” polish, side golas etc., with hardware such as hinges, catchers and handles. Inside of tables, drawers, storage cabinets shall also be finished with 8mm thick laminate of approved color. 14 Rft. 7 Side Rack with 1½” thick post-form factory made Tops: Providing and fixing side rack, 2’-3” ht. as per design. These racks shall have two drawers with storage below and be made of 19mm thick commercial board; 1mm thick laminate (inside & outside) with rubber -wood gola of size 1 ½” x ¾” polish, side golas, handles, catchers, hinges etc. Inside of drawers, storage cabinet portion shall also be finished with 8mm thick laminate of approved color. 12 Rft. 8 i Storage with 1½” thick post-form factory made Tops: Providing & fixing storage along wall 1’-6” deep made of 19 mm th. Comm. Board & 1 mm th. laminate, (inside & outside) complete finished with golas/margins, handles, hinges and catchers, front openable shutters, as per requirements / design / 210 Sqft. drg. Inside of drawers, storage cabinet portion shall also be finished with 8mm thick laminate of approved color. ii Providing & fixing G.I. sheet on backside of storage cabinets. 210 Sqft. 9 Cash Counters with 1½” thick post-form factory made Tops: Providing & Fixing Cash – counters 2’-9” wide, with two levels i.e. 2’-6” & 4’-0” ht. The lower portions top & all other exposed surface shall have 1mm thick laminate (inside & outside) and golas/margins. The lower portion on cashier side there will be provision of 3 nos. drawers with sliding channels of Ebco. for cash, stationery, key board, etc. rubber -wood beadings / gola etc. Inside of drawers, storage cabinet portion shall also be finished with 8mm thick laminate of approved color. 5 Rft. 10 Manager Table with 1½” thick post-form factory made Tops: Providing & fixing Branch Manager table 2’-6” ht. with rubber-wood Gola of size 1 ½” x ¾”. as per drgs. having drawer/s, storage cabinet, key board, with sliding channels of Ebco, foot rest, space for CPU & Monitor, all as per drg. / design, the table shall be made with 19mm thick com. Board finished with 1 mm thick laminate (inside & outside) hardware, such as handles, catchers, hinges etc. shall be shall be provided as per requirement. Inside of drawers, storage cabinet portion shall also be finished with 8mm thick laminate of approved color. 6 Rft. 11 Providing & fixing writing stand of size 3’-0” x 1’- 0” x 1’-7 ½” high (face area) as per design drg. Made of 19mm th. Com. Board, 1 mm th. Laminate with rubber wood lipping etc. 3 Rft. 12(i ) Providing & fixing notice board of size 2’-6”x 4’-0” finished with ivory colour 1mm th. laminate, 1”x1” th. rubber wood beading on all sides. 1 No (ii) Providing & fixing soft boards of size 3’-6”x 2’-0” (covered with openable glass shutters) on 10mm th. comm. ply 12mm th. soft board finished with cotton fabric , 1”x2” rubber wood beading. 1 No 13 Providing & Fixing cheque drop box and complaint box of size 18” x 27” as per detail. 2 No 14 Painting work on walls & cemented ceiling (in ground floor & basement floor) with oil bound distemper paint and enamel paint on shutters and grills. 2500 Sqft. 15 Providing & laying texture paint. 300 Sqft. 16 P/F vertical blinds of vista / Mac of approved shade / colour. 0 Sqft. 17 Providing & supplying dressing table with mirror of size 1’-0”x5’-0” including sitting desk for lockers room. 1 No 18 UCO BANK LOGO: Providing , making to shape and size ( as per the design provided) and fixing to position UCO Bank logo made out of ACP / Acrylic sheet of bank color (pre approved) fixed to position with aluminium framework with required screws, nutts bolts and hooks etc. of size 2 x 2, including outer frame finished with teak wood vinear ply with cove for 8 Sqft. lighting as LED strip. Below logo, the banks name shall be written in golden / orange ACP sheet letters as per design. 19 MDF JAALI: Providing and fixing 12/18mm thick MDF Jali computerized cut design on columns. Back side of this jali will have milky white acrylic sheet with yellow colored LED 4’ long tube lights at every 2’-0” C/C. 20 Sqft TOTAL B. ELECTRICAL QTY. UNIT RATE AMOUNT (RS) 1 i Providing & Fixing 2’x2’ recessed / or panel model mounted LED Luminaire LCTLR-36-CDL of Crompton. 12 No 2(i) Providing & Fixing 15 W LED ROUND DOWNLIGHTER LCND-15-CDL of Crompton. 22 No (ii) Providing & fixing LED tube lights 1x20W of Philips. 10 No 3(i) Providing & Fixing wall fans: Khaitan / Crompton Greaves / Orient. 9 No (ii) Exhaust Fans 12” Dia : 1400 rpm (Double ball bearing) Heavy duty Crompton Greaves / Phillips. 3 No (iii) Providing & Fixing ceiling fans: Khaitan / Crompton Greaves / Orient 4’ dia. 1 No (iv) Cost of modular regulators of Havells / Anchor ROMA makes. 1 No v Supply Installation, testing & commissioning of LED STRIP light with driver and Accessories complete as required ( MS CROMPTON or equivalent of WIPRO , PHILLIPS, BAJAJ etc. Warm White Cat No. 38389 (M/S Philips) 70 Mtr 4 ELECTRICAL POINTS : Providing laying, fixing & testing of electrical points including wiring from MCB’s to switches, plate type switches, socket & M.S. Modular boxes with rust proof treatment size to accommodate the required nos. of switches & sockets plus circuit wiring from switches to lights/fans/fixtures etc. wherever required complete with earthing 1.00 mm2 multi strand wire in 25mm dia. Unbreakable PVC conduit ISI marked with specials under floor / wall & above false ceiling or making truff under / along work – stations including chase cutting, disposal of melba away from the site and repair of the same with cement mortar, copper conductor wires only will be used of approved make. a) Air Conditioning wiring: Supplying & laying of Eletrical flexible cable of 5x2.5sq.mm multi strand suitable for 2.0 Tr , 1.5 Tr & 1.00 Tr H.W Split/Cassette unit between Indoor & Outdoor units shall be considered as ONE length for the purpose of measurement. (Make : Havells/Legrand/ KEI/ Finolex) 5 Nos b) A/C wiring from AC D/B to indoor unit with 5 x 2.5 sq.mm. with one no. 1.5 sq.mm. insulated copper conductor of PVC insulated PVC sheathed armored cable of 1100 V (IS-1554 part I) and fixing of cable on wall with suitable size of clamps/ saddles or laid in floor/recess wall including cutting of floor/wall and making good the damages etc. 5 Nos c) P/F metal clads for A.C.s: Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A C curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 5 No d 4 x 10 sq.mm. aluminium conductor with 1 no. 8 SWG G.I. wire (to ups room) 25 Per mt. e P/F 4way box with 32 amp DPs for UPS input and output. 2 Nos f) P/F 32 Amp TPN for UPS output from D/B to UPS ROOM 1 No c) 15 Amp wiring with 2.5mm sq. multi strand PVC copper wire & metal clad enclosure sockets & plus. 12 No d) 5 Amp plug point wiring with 1.5mm sq. multi stand PVC copper wire inc. Plate switches, sockets, plugs. Etc. 15 No e) Call-bell point wiring including Ding-dong bell with 1.5mm sq. multi strand PVC copper wire including plate switches, sockets, etc. 1 No f) Wall Fan points with 3-pin socket and switch, lights & exhaust fan point wiring with 1.5mm sq. from D/B to switches & fittings multi strand PVC copper wire including plate switches, sockets, etc. ( For payment no. of switches shall be counted). 50 No g) Signage wiring – P&F of 3x4mm & copper flexible wire & PVC conduiting of ISI make complete with all accessories like Saddles, bends modular switches etc. 1 No 5 UPS POINTS: P/L & testing electrical three point wiring /circuit wiring having individual circuits for computers with 2.5mm2 Multi-strand copper PVC wire in unbreakable PVC conduits 25mm dia wall thickness 2mm thick with specials under floor / wall & above false ceiling including chase cutting, disposal of malba away from the site and repair of the same with cement mortar, incl. Switches & socket M.S. switch boxes with rust proof treatment size to accommodate the required nos. of Modular switches, sockets etc. & plate type sockets with indicator three in one plate including earthing with 1.00 mm2 multi strand wire complete in all respect. 0 (i) Set of 6 amp. 4 sockets & 4 switches 15 SET 6 GEL TYPE CHEMICAL EARTHING (Distance between each pit shall be min 1.5meter) Supplying and installation of copper Gel Earthing station having length 3000 mm including bore-well, chamber with cover and all required civil allied works each earth pit to filled with 2 bags in 30 Kg 3 No pack of “Black-Fill Compound” (BFC) EARTHING CONDUCTORS: Wiring with 1x10 sqmm PVC insulated copper conductor wire of 650/1100 volts grade (Finolex make flame guard quality) as earth wire with concealed/exposed PVC pipe including making all the connections. 7 Providing and fixing of PVC conduit in wall floor including Telephone wire, M.S. box and two pin telephone sockets or R.J. – 11 plates out let incl. Testing and commissioning etc. as required. 6 No 8(i) Providing, laying, testing and commissioning CATVI/ Lucent / D-link computer networking cable in PVC conduit in floor or wall from server room to each table with I.O.’s (Socket) 15 No (ii) Supplying of patch chords for computers 1m & 2m length. 20 No 9 Elect D/B with all internal connections for electrical and generator connections with 10 sq.mm multi strand copper wire, which shall include the following items. (i) Amp Meter and voltmeter set 1 SET (ii) Kit-kats 100 Amp. With neutral link. 3 No (iii) Neutral link. 1 No (iv) Aluminum bus bar 100 Amp proper tinned. 1 No (v) 100 Amp. Main switch MCCB type. 1 No (vi) Change –over 63 Amp. 3-Phase. 1 No (vii) Providing and fixing different rated MCB,s, DPs for lights, fans, and power supply of Havells make. 24 No (viii ) Providing and fixing TPN (tripping type) of 100 Amp of Havells make. (one for lights and one for power supply) 2 No ix Making double-door powder coated M.S. Distribution board 3’x4’ to accommodate the above noted electrical items. 12 Sqft x P/F 3 phase 4-way D/B (Quote the cost of Box only) 2 nos UPS SUPPLY xi Providing and fixing (MCB type) DP of 63 Amp 2 No xii Providing and fixing different rated MCB,s for UPS supply of Havells make. 10 No xiii P/F single phase 8-way & 6-way D/Bs (Quote the cost of Box only) for UPS supply for MCB’s. 2 No 10(i ) Providing & fixing main electrical cable 4- core al. cable armored from elect. pole to meter 35mm dia. 30 Mtr (ii) P/F generator wire/cable 16mm 4-core Alum. Cable armoured. 20 Mtr (iii) P/F 16mm 4-core Alum. Cable from bus-bar to ATM. 3 Mtr 11 Making double-door wooden laminated electrical almirah 3’x8’ to accommodate the above noted electrical items. 32 Sqft 12 Providing, fixing, testing and commissioning computers 24- Ports networking switch & patch panel with racks 1 No 13(i ) P/L copper pipe with complete almirah 3’x8’ to accommodate the above noted electrical items. 32 Sqft 12 Providing, fixing, testing and commissioning computers 24- Ports networking switch & patch panel with racks 1 No 13(i ) P/L copper pipe with complete insulation required for 1.5 ton split type A.C.s from the place of external units upto the location of inside units. 230 Rft (ii) Providing and laying 25mm dia. PVC pipe heavy duty Diplast make for drainage of water of inside units. 150 Rft TOTAL ATM S No DESCRIPTION QTY UNI T RATE AMT 3 ATM (FURNISHING WORKS) 1 Providing & fixing in position false ceiling in Armstrong 600 x 600 mm x 15/16 mm Dune Supreme RH 99 Prima tile as specified by Armstrong Co. with suspenders wherever required. Making necessary framework for A.C. ducting, if any, and necessary cutouts for diffusers and light fittings, taping and finishing to proper line & level, including making grooves and trap doors for A.C unit in 18mm thick M.R. Grade Plywood with Stainless Steel hinges & locks with moulding 1” x 1” for edges, if any including finishing with White Plastic Emulsion Paint etc. complete in all respects. 60 Sqft 2 TOUGHENED GLASS DOORS, FIXED GLASS & PARTITION: Providing & fixing 12 MM thick toughened glass for door and fixed glazing, with complete patch fittings such as floor spring, handles, lock and L-brackets etc. The job shall also include etching design. 40 Sqft 3 P/F wall paneling on soft Alum. frame sections 1x2 placed @ 2’-0” c/c horizontally & vertically @ 1’-0” C/C, finished with 6mm thick commercial ply/Bison board finished with 1.00 mm thick laminate as per design, the paneling shall be closed with 2” x 1” rubber / teak / nu-wood beading 250 Sqft 4 Providing and fixing Aluminum frame partition made of internal frame of 1 ½” x 2.5” Alum. sections placed at 2’-0” c/c vertically and horizontally finished with 6mm thick Bison Board/commercial ply on both sides finally finished with 1.00 mm thick laminate on both sides with horizontal grooves. These partitions shall have 5.00 mm thick glass (etching as per design) above 2’-6” ht. or 4’-0” ht with beading ½”x1 1/2” . The rate of partition shall include providing & fixing door in partitions made as per the specifications of partition, but with complete hardware required such as latches, stopper. The low ht. partition shall 50 Sqft have rubber-wood / teak-wood gola of size 3” x ¾” which shall be polished as per shade reqd. 5 P/F ACP panelling on front face. 300 Sqft 6 Grouting of ATM Machines with Anchor fastener as per Bank’s rules, (Including the cost of RCC 12” slab. 0 NO 7 Providing & Fixing Flooring with vitrified tiles joint – free of minimum 9 mm thickness , size 24” X 24” , 4 “ Skirting , all fixed in 1:5 cement mortar, complete with cutting and filling joints with white cement. Make of tiles Johnson/bell/euro/asian /nitco/naveen/somani or equivalent. Ivory / shade or as specified by the bank. 0 Sqft 8 P/F cheque drop box-cum-writing top having 12mm th glass top. 1 NO 9 P/F acrylic notice board of size 2’x3’ with chrome spacers. 1 NO 10 Providing and supplying plastic dust bin and chair. 0 Set 11 P/F Aircon louvers powder coated of size 12” long. 2 Sqft 12 Painting work on walls & cemented ceiling, , rolling shutters with oil bound distemper paint/enamel paint, external walls are to be painted with snowcem with complete preparation of surface with wall putty, grinding. 0 job TOTAL 4 ELECTRICAL WORKS FOR ATM: S No DESCRIPTION QTY UNI T RATE AMT 1 Connectivity from server/dish Antenna: P&F of 40mm PVC conduit of ISI make including data cable of D-link (Cat-VI) & RJ-45, complete for connectivity. (to be concealed with openable and lockable box) 2 NO 2 Providing & Fixing 2’ x 2’ recessed mounted LED Aura I - LCPL-36-CDL(2X2) of Crompton. 2 NO 3 Providing & Fixing 15 W LED ROUND DOWNLIGHTER LCND-5-CDL of Crompton. 8 NO 5 Providing & fixing ordinary tube lights 1x40W of Philips. 0 NO 6 GEL TYPE CHEMICAL EARTHING (Distance between each pit shall be min 1.5meter) Supplying and installation of copper Gel Earthing station having length 3000 mm including bore-well, chamber with cover and all required civil allied works each earth pit to filled with 2 bags in 30 Kg pack of “Black-Fill Compound” (BFC) EARTHING CONDUCTORS: Wiring with 1x10 sqmm PVC insulated copper conductor wire of 650/1100 volts grade (Finolex make flame guard quality) as earth wire with 0 NO concealed/exposed PVC pipe including making all the connections. 7 Lights point wiring from UPS / raw power supply with 1.5mm sq. from D/B to switches & fittings multi strand PVC copper wire including plate switches, sockets, etc. (For payment no. of switches shall be counted). 8 NO 8 Electrical wiring for UPS input-output: P / F 32 Amp wiring with with 2 DP’s of 32 Amp. from D/B to the location of UPS/UPS room for input and output power supply with 2 runs of 4mm sq. and one run of 1.5 sq. mm as earth wire multistrand PVC copper wires, with DP switches / power pt. i.e. switch-socket. 0 NO 9 P/L & testing electrical three point wiring having individual circuits for computers with 2.5mm2 Multi-strand copper PVC wire in unbreakable PVC conduits 25mm dia wall thickness 2mm thick with specials under floor / wall & above false ceiling including chase cutting, disposal of melba away from the site and repair of the same with cement mortar, incl. Switches & socket M.S. switch boxes with rust proof treatment size to accommodate the required nos. of Modular switches, sockets etc. & plate type sockets with indicator three in one plate including earthing with 1.00 mm2 multi strand wire complete in all respect. Set of 6 amp./16 1 socket & 1 switch (to be concealed with openable and lockable box) 2 SETS 10 15 Amp wiring with 2.5mm sq. multi strand PVC copper wire & metal clad enclosure sockets & plus. 1 No 11 5 Amp plug point wiring with 1.5mm sq. multi stand PVC copper wire inc. Plate switches, sockets, plugs. Etc. 1 NO 12 P/L copper pipe with complete insulation required for 1.5 ton split type A.C.s from the place of external units upto the location of inside units. 50 Rft 13 Providing and laying 25mm dia. PVC pipe heavy duty Diplast make for drainage of water of inside units. 20 Rft 14 Supplying, erection and commissioning of timer switch 240-volt single phase for AC & Glow sign Board 2 No 15 i P/F raw power D/B (8 way S/P: 1 DP, 6 Mcbs) 1 No ii P/F UPS power D/B (4 way S/P: 1 DP, 2 Mcbs) 1 No 16 Providing and fixing 16mm cable 3-core aluminum from main panel to the DB of ATM. 0 Rmt
