Tender For Interior Furnishing Work Of Uco Bank, Khuntunihat Branch INTERIOR FURNISHING WORK 1 Bank Counter:Providing, fabricating and fixing in position Cash counters as per Layout Plan for both clerks and cashiers as per design and specifications.All faces of the counters, top, bottom, sides except writing table shall be of 19mm thick commercial ply Boards of approved brand, table top shall be of 25mm thick commercial ply Boards of any approved make. All external faces shall be finished with 1mm thick Laminate of approved quality and make all board edges finished with T.W beading.Clerk counter unit shall be provided with a storage cabinet and drawer out of 19mm thick commercial ply Boards and cashier’s counter shall have two drawers and cabinet as per design. All drawers shall be prepared of 19mm commercial ply Boards and finished with 1mm Laminates on front side and the inner surface is finished with 0.7mm th. inner mica including T.W. Beading. The drawers and shutters shall e provided with Godrej locks and knobs. Each counter unit shall be provided with one pullout computer keyboard of suitable size, laminated on both sides and T.W. beading on edges and fixing with necessary roller fittings All unlaminated surfaces shall be painted with two coat synthetic enamel paint over a coat of wood primer or polished as per requirement. Alluminium jally to be provided in top of the each cash counters which will be covered the ceiling of cash counters. Ø High Level Cash Counters Rft 5.00 Ø Low Level Cash Counters/Front office counter Rft 9.00 2 Full Ht: Glazed/Semiglazed/Solid:-Providing and fixing wooden double skinned partition, partly glazed and partly panelled,or solid as per Design drawing and specifications on cash cabins, managers cabins, general counters, Work stations and Glazed partitions on counters top and any other areas as shown in the Layout Plan .The frame shall be 2’x2’ (horizontally and vertically) comprising of 2”x1 ½” hevy gazed almunium section and/or as per frame work shown in the drawings covered with 9mm thick commercial ply Boardsof approved make and finished with 1mm thick Laminates of approved shades and the panel shall be as per Design and direction. For Glazed portion 8mm thick plain glass with boarder and decorative design itching as per design and direction shall be provided including decorative /plain beading .The glass partition above general /ledger counter shall be of 8mm thick plain glass with boarder and decorative design itching as per design and direction with 2”x1 ½” hevy gazed almunium section at each counter unit and with decorative moulded heads including necessary sft 280.00 9 wooden beading, painting and polishing. Matching to existing partition & as directed by the architect. 3 Low ht. Partition:Glazed/Semi Glazed/Solid:Providing and fixing in position partly glazed 4-6 HT. Partition work as per drawing ,in frame work at 2’x2’ grind (horizontally and vertically) comprising of 2”x1 ½” hevy gazed almunium section and/or as per frame work shown in the drawings with 6 mm plywood on both sides finished with 1 mm thick laminates of approved shade and colour as shown in drawings. Item to include 12 mm thick glass with etching and frosting as per design and fitted with SS finished patch panel and 2”x2” T.W. member for door sides and glass sides and T.W. door frame to take 12 mm thick glass with etching and frosting.All exposed T.W. surfaces to be finished in melamine polish of matching laminate colour as directed including all necessary Stainless Steel finish fittings/hardware and wood preservative paint etc. as per list of approved material and as approved by the Project Consultant/Bank complete in all respects. sft 90.00 4 Doors :semi glazed/solid: Providing & fabricating fixing door shutter with 28mm x 75mm height & 28mm x 75mm, 28 mmx 60mm, 28mm x80mm rails respectively by using Giringa/ Kasi wood of well seasoned with necessary wood joining, planning, polishing etc., as per drawing matching the aligned partition . The shutter will have part glazed 8mm thk float glass side beveled , high polished with body itching of st globain & part solid one covered with 6mm commercial ply Boards , both sides covered with 1 mm tk laminate of approved shade with necessary WB wood beading etc mat polished with melamine polish of asian / ici , complete to match the aligned partition elevations designs, the rates are inclusive of cost of necessary hinges, handles,cylyinderical locks, aldrops etc., all labour, materials, taxes, leads & lift to the place of work executed to the satisfaction of the Architect. sft 63.00 5 Providing and fixing Godrej Night latches to cash cabins and finished smooth. no 1.00 6 Wall Panelling:Providing and fixing wall panelling to columns in the halls with 2”x1 ½” hevy gazed almunium section (approx) fixed to wall treated with ant termite treatment, covered with 9mm commercial ply Boards and finished with 1mm thick laminates as per design and direction. sft 260.00 7 Providing and fixing Godrej make over head door closers to manager’s chamber door & cash counter door with necessary fixtures and fittings etc. no 3.00 8 LED Logo:Providing,fitting & fixing LED Logo with letter size required for the work and complete in all respect as directed by Engineer-in-charge. Nos 8.00 9 Floor spring :Providing & fixing Godrej make heavtduty floor spring in entrance door with necessary fixtures and fittings etc. nos 1.00 10 10 Gypsum Celing:Providing and fixing Suspended false ceiling to Manger’s cabin and hall with standard G.I./Aluminium Suspended frame as per manufacture’s specification with 12mm thick Gypsum boards including necessary cornice and boarders and concealed lighting system including one coat wall putty of (Birla/jk) as leveller and 2 coats plastics emulsion paint over a coat of primer..( Only the plan area will be measured for payment. No extra payment will be made for cutouts, grooves,mouldings etc.) sft 425.50 11 Suspended grid ceiling - Armstrong Group ceiling: Providing / Fixing in true horizontal level 600mm x 600mm suspended ceiling system manufactured by M/s Armstrong World Industries using hot dipped galvanized steel section, exposed surface with pre coated capping, main tee of size 24 x 32mm at every 1200mm c/c maximum and rotary stitched cross tee of size 24 x 27mm at every 600 mm c/c and sub cross tee of size 24 x 25mm at 1200mm c/c and wall angle of size 19 x 19mm fixed to the periphery of the wall. The above grid is suspended at every 1200mm c/c in both directions using 2.0mm thick prestraightened GI wire laying DUNE PRIMA Board edge ceiling tiles manufactured by M/s Armstrong World Industries, having RH99, NRC of 0.70 and size 600mm x 600mm x 18mm and having pealr finish over the formed grid complete.cost to be includ all cutouts for light fixture smoke detector etc. sft 416.00 12 Providing and fixing notice board with 19mm commercial ply Boards of approved make,back of size 3-0x4’-0” fixed to wall with necessary brackets and finished with fabric matching with colour and above board edges shall be finished T.W. beading & cover provision provided. no 1.00 13 Providing and fixing customer’s writing shelf with 19mm commercial ply Boards of size 1”3”x4’-0” fixed to wall with necessary brackets and finished with 1mm thick laminate of matching colour and above board necessary pockets/shelves of suitable size to be provided to keep the vouchers and edges shall be finished T.W. beading. no 1.00 14 Front Entrance Door ( 12 mm Toughend glass ):Providing and fixing fully glazed anodised aluminium section of approved size at entrance and other areas with necessary floor spring arrangement as per design and direction etc. Complete including Bank’s Monograms of suitable size itching patter n as per direction. The thickness of glass shall be of 12mm thick Toughend glass. sft 40.00 11 15 Workstation Table:Providing and fixing work station table along with side racks made of 19mm commercial ply Boards and finished with 1mm Laminates on front side and the inner surface is finished with 0.7mm th. inner mica including T.W. Beadingcommercial ply The table top shall be as per under mentioned dimensions and the side racks shall be of 1’3”x2’9top having all necessary arrangements for keeping the computer,,accessories,like CPU,printer, ,key, board, monitors etc.Part of the rack shall be provided with pull out drawer with locking arrangement .All exposed surfaces shall be finished with wooden round beading and finished with wooden round beading and finished with melamine polish etc.complete. 1)Workstation top size2’6”x4’6” no. 4.00 16 Vertical Blinds:Providing and fixing venetian Blinds to window, vertical type (4 width) MAC/VISTA make including necessary mechanical system as available colour to match the room decor. sft 80.00 17 Manger Table:Providing and making Managers; table size of 5’6”x3’0”x2’6” ht. With 19mm commercial ply Boards and finished with 1mm Laminates on front side and the inner surface is finished with 0.7mm th. inner mica including T.W. Beadingcommercial ply Boards box type as per design with full 12mm thick single glass top .The side rack shall be of1’-6’x4’x6’ drawers as design finished with melamine polish.1.5mm thick laminates of approved colour including necessary T.W. beading and handles and lock shall be of best quality Godrej make for keeping the computer,,accessories,like CPU,printer, ,key, board, etc. Complete. no. 1.00 18 Low height /full ht.Storage OR over head storage:Providing and fixing of low height OR over head(2-6 & 4-6 or full ht. as per design) storage cabinate having 450mm/750 mm as per instruction of architect. depth of made out of 19mm th. block board .The exposed surface is to finished with 1.0mm th.laminates and the inner surface is finished with 0.7mm th. inner mica as per design of approved shade are to be finished with as per design The work should be completed including fittings like handles,locks etc completely &according to drawing and design including all labour and materials. sft 160.00 19 Facede Front Entrance Door:Providing and fixing in position Aluminium composite panel boxing with PVDF coating & LDPE core laminated Eurobond / Altobond/ Alukbond Exterior Grade 4 mm thick with composite of (0.5 mm – 3 mm – 0.5 mm) including fabrication for the same with aluminium sections, required hardware, silicon sealant (Dow corning 789) masking tape, necessary scaffolding etc. as detailed in drawing complete in all respects. sft 56.00 12 20 Chq.Drop Box & suggestion Box:Supplying and erecting cheque drop box (overall size 450 mm x 300 mm x 750 mm) made. of 19mm thick phenol formaldehyde bonded plyboard and the curved portion at top made out of 90 mm x 90 mm C.Pteak wood section. A slit opening of 10 mm x 150 mm is to be provided at the top of the box. An openable shutter of 259 mm x 262 mm size made of 1 9 mm thick phenol formaldehyde bonded block board is to be provided at 1.50 mm above finished floor level. All the exposed timber surfaces including. all free edges are to be finished with 1 rnm thick laminate sheet of combination shade .Inner faces of block board surfaces are to be finished with minimum two coats of synthetic enoma!. paint of approved shade and quality over a coat of approved primer.Rate .to include cost of necessary hardware fittings e.g. brass hinges, lock, knob etc. of approved.designand quality. no 2.00 21 Challan / Card holder: Providing and fixing card holder as per drawing and direction of architect with 19mm play and 8mm th. Coloured eached and polished glass. The size of the card holder will be 1- 3x2-0 fixed in wall . The work include all labour and materials. no 1.00 22 Wall Paint work:Wall paint with POP & putty.Sand papering,cleaning the surface,applying primer with lambi putty/pop punning to full surface in 3 layers,thereafter applying 3 coats of paint of approved shade & color on walls.roller to be applied on all surface etc complete.jobs to include proper covering of furnitures so as to avoid damage. sft 2950.00 23 Electrical Panel Board Cover:Providing and fixing of electrical panel board cover made up of 19mm ply with two shutter at the front having T.W luvers as per drawing and design, it allso have furnished with locking arrangement. The exposed surface is finished with 1mm. Th. Laminates and inner surface is finished with two cote of plastic emulsion paint over one coate of primer . The work should be completed including all hardware, material and labour. sft 28.00 24 Enamel paint -: Providing and painting two coats of enamel paint of approved shade and colour over one coat of red oxide primer with all cost of materials and labour. Sft 160.00 Total
