|
| 1 | Supply & Erection of 9.0 M long steel tubular pole designated 410 SP-33 with 1/6 over all length of pole grouted in cement concrete 1:3:6 including the plinthing of pole 30 cm. above the ground level including excavation back filling etc. Rates are including all materials, labour. T&P etc. required for proper completion of work as per direction of E/I. With GI bottom. S.O.R.-18 NO. 618 |
| 2 | Supply and fixing of suspension clamp complete in all respect as per UPPCL approved makes & norms. |
| 3 | Supply and fixing of dead end clamp complete in all respect as per UPPCL approved makes & norms. |
| 4 | Supply and fixing of piercing connector complete in all respect as per UPPCL approved makes & norms. |
| 5 | Supply and Fixing of I /J /U hook made of 25MM M.S. Rod complete with material and labour. |
| 6 | Supply and fixing of 3X95MM + 1X70MM + 1X16MM arial bunch condctor (ABC) complete in all respect as per UPPCL approved makes & norms. |
| 7 | Supply and fixing of 3 phase moulded type 8 ways distribution consumer box complete in all respect as per UPPCL approved makes & norms. |
| 8 | Supply & Erection of 11M long steel tubular pole designated 410 SP-55 with 1/6 over all length of pole grouted in cement concrete 1:3:6 including the plinthing of pole 30 cm. above the ground level including excavation back filling etc. Rates are including all materials, labour. T&P etc. required for proper completion of work as per direction of E/I.With GI bottom. |
| 9 | Supply and fixing of M.S. channel (Top channel) of size 100X50MM, 2.24M LONG (7.9 KG/M) with M.S.clamp 50X6MM Comp. with Painting as per direction of E/I. |
| 10 | Supply & Fixing of 100X50MM ,1.30M Long channel (7.9 KG/M) with M.S.clamp 50X6MM Comp. with Painting as per direction of E/I. |
| 11 | Supply and fixing of M.S. channel of size 75X40M.M. 2.24M Long (5.7 KG/M) with M.S.clamp 50X6MM Comp. with Painting as per direction of E/I. |
| 12 | S/F of \"V\" cross Arm M.S.Channel 75X40MM, including D-clamp with material & labour all complete as per direction of E/I. |
| 13 | Supply & erection of \"D\" clamps of 50 mm x 6 mm flat iron on steel tubular poles/ steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint. |
| 14 | S/F of 11 KV pin insulator with G.I. pin on S.T.pole or any where specified including bolts to fasten the pole cap/cross arm Comp. in all respect as per UPPCL approved makes & norms. direction of E/I |
| 15 | S/F of 11 KV disc & fitting, T &C type, including nut, bolts, washer etc.Comp. in all respect as per UPPCL approved makes & norms. direction of E/I |
| 16 | S/F of 11KV T.P.M.O.set with required channel, handle switch and insulator etc. Comp. in all respect as per UPPCL approved makes & norms. direction of E/I MDA-2018 |
| 17 | S/F of 11KV D.O. set on pole Comp. in all respect as per UPPCL approved makes & norms. direction of E/I |
| 18 | S/F of Lighting arrestor for 11KV complete with base shortd with G.I. strip of Size 35x5mm. Comp. in all respect as per UPPCL approved makes & norms. direction of E/I |
| 19 | Making of transformer plinth of size 2.5M X 2.0M X 1.5M with M 150 brick work in 1:4 cement and fine sand moter having 10 cm thick concrete with 12:6:1 in B/B, F/S & cement in foundation & 10 cm thick P.C.C with s/Grit, C/sabd and cement in 4:2:1 at top of plateform including plaster in 1:4 cement & F/sand over brick work L/C supplier of all material labour T&P etc. required for proper completion of work complete in all respect as per direction of E/I |
| 20 | S/ F of 2 mt high cage fabricated with 3 mm thick wire expandod matel fixed on 50x50x6 mm. Angle iron frame having vertical members spaced at1.0 mt to 1.25 mt & horizontal members spaced at 1.0 mt the vertical members shall be grounted in floor. the cage shall have 1000x1000 mm size one leaf door with locking arrangement having door frame fabricated with 35x35x6 mm. angle iron &3 mm expand metal duly fixed with the cage members with hinges etc. the cage shall be painted with red oxide primer& senthetic enamelld paint as per direction of E/I. the job includes all material labour, T&p etc. for proper completion of work . |
| 21 | S/F of HDPE (DWC) pipe 120/103.5 MM for road crossing etc. at depth of 750 mm below ground level for L.T. cable and 900 mm below ground level for H.T. cable as cable carrier as per E/I. (make Dura-line or Reck) |
| 22 | S/F of socket/coupler for HDPE (DWC) pipe 120/103.5 MM complete in all respect as per E/I. (Make- Dura-line /Reck). |
| 23 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at a depth of 750mm below ground level over a cushion of 75 mm thick sand all around and proctected with burnt bricks on side and on top on surface the cable run shall be fixed on M.s clamps etc. of suitable size or as direction by the E/I complete in all respects the amouning of the cable shall be properly connected with the earth conductor by clamps etc. the rate will be deducted @ Rs 170/RM when cable is passing through G.I /M.S or hume pipe. As Following (i)240 SQMM X 3.5 CORE |
| 24 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at a depth of 750mm below ground level over a cushion of 75 mm thick sand all around and proctected with burnt bricks on side and on top on surface the cable run shall be fixed on M.s clamps etc. of suitable size or as direction by the E/I complete in all respects the amouning of the cable shall be properly connected with the earth conductor by clamps etc. the rate will be deducted @ Rs 170/RM when cable is passing through G.I /M.S or hume pipe. As Following (ii) 120 SQMM X 3.5 CORE |
| 25 | S/e of plam /pin typr cable socket (lugs) to the cable leads insulating with tape& making connection etc. complete in all respects as per direction of E/I. (i) 240 SQMM |
| 26 | S/e of plam /pin typr cable socket (lugs) to the cable leads insulating with tape& making connection etc. complete in all respects as per direction of E/I. (ii) 120 SQMM |
| 27 | S/F of HT/LT jumpering & connection of double pole & T/F As per direction of E/I. |
| 28 | Supply, Insatalation, testing and commissioning of 250 KVA 11/0.440KV copper wound, Oil filled, air cooled, DYN-11 Vector group Transformer with all accessorries breather temperature meter etc. complete in all respects as per direction E/I & UPPCL approved. (4 star rating) WITH 3 YEARS WARRENTY. |
| 29 | S/M of water level earthing of natural & body of T/F shall be done by B class GI pipe 40 mm dia 4 mm thick by boining up to water level 20 mtr. Deep 7 connectiong of m. s. flat 35x5 mm etc. complete in all respects as per direction of E/I. |
| 30 | Painting of S.T Pole with 2 coats of aluminium paint over red oxide primer complete in all respect SOR 2018/634 |
| 31 | Making suitable earth of S.T.Pole with 2.5 mt long 20 mm dia G.I rod, 4 S.W.G.G.i wire include the cost of all material, labour, T&P etc complete in all respect. MDA 2018/26 |
| 32 | Supply, sagging, tensioning, jointing, binding of Rabbit ASCR conductor confirming the I.S. specification including cost of binding wire, jointing sleeves, PG clamps, labour, T&p etc. required for proper completion of work as per direction of E/I. SOR/2018 627 |
| 33 | S/F of 100 MM Dia G. I. Pipe included Suitable size M.S. Clamp with bolts & realing end of pipe and nuts complete in all respect as per direction of E/I. MDA-18/16(iii) |
| 34 | S/F of 3 phase marbel stone distribution piller of size 100x900x48 mm. fixed on M.S. angle iron frame of size 50x50x6 mm. suitable for 500 amp. Incoming having 6-9 no. of fuse strips out going circuit complete in all respect al per norms of UPPCL MDA-18 / 14 |
| 35 | Supply, stringing & binding of over head line with G.I wire no. 4 to 8 SWG on pole including binding,labour. T&P etc required for proper completion of work as per direction of E/I. S.O.R.-18 NO.- 628 |
| 36 | Supply & Erection of hexagonal/cradle type gaurd of G.I.wire no.4 to 8 S.W.G including binding etc. complete in all respect. S.O.R.-18 NO.- 629 |
| 37 | Supply & erection of stay set 3.5 mt away from the pole complete with galvanlsed 19 mm diax1.80 mt long rod 30x30 cm .x 6.3 mm.Anchor plate, thimble stay clamps, stay insulator, 19 mm x 600 mm double screw tightner, 7/3.5 mm G.I stay wire etc. in 1:3:6 cement concrete complete in all respect S.O.R.-18 NO.- 631 |
| 38 | Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules. S.O.R.-18 NO.- 1109 |
| 39 | Supply and fixing of LED Street light fitting having die cast aluminium body and diffuser/Reflector with driver set suitable for 30Watt-40Watt. Confirming to IP 66 and above protection on pole, complete in all respect as per dir. of E/I. catt-AA.as per U.P.P.W.D. Approved S.O.R.-18 1420 |
| 40 | Supply and Laying of unarmoured 10SQMM 2 Core \"AL\" Twin flat cable comp. with connection, testing etc. (PSR) |
| 41 | S&F of 63 Amp. 415 V matal clad TPN Rewirable type switch fuse unit complete on angle iron bracket complete in all respect. CAT-B. S.O.R.-18 316 Please Enable Macros to View BoQ information |
