|
| 1 | TABLE WRITING FD 275 : M&L for carrying out repair/replacement of following parts of Table writing as per drawing after removing the old unserviceable parts complete all as specified and shown on drg |
| 2 | Top of table using 18 mm thick prelaminated particle board Make (Archid/Novapan/ECCO) ISI marked, including 6 mm thick teak beading all around. |
| 3 | Legs using teak wood(MP Teak) |
| 4 | Rails using teak wood(MP Teak) |
| 5 | Front of drawer and shutter of cabinet using 18 mm thick prelaminated particle board (One side teak finish) |
| 6 | Shutter of cabinet using 18 mm prelaminated particle baord (One side teak finish and other side white balancing laminated)) |
| 7 | Sides bottom and shelf of cabinet using 12 mm thick particle board. |
| 8 | Bottom of drawer and side of cabinet using 6 mm thick commericlal ply wood make kit/green/national |
| 9 | Supply and fixing knobs to drawers |
| 10 | Applying two coat of french polish (ready made) to article after necessary prepartion of surfaces |
| 11 | Table 3x2 withoutdrawer FD 284 :- M&L for carrying out repair/replacement of following parts of Table 3x2 without drawer as per drawing after removing the old unserviceable parts complete all as specified and shown on drg |
| 12 | Top using 18 mm thick prelaminated particle board Make (Archid/Novapan/Ecco) ISI marked exterior grade including 6 mm thick teak beading all aroung. |
| 13 | Leg using teak wood(MP Teak) |
| 14 | long side rails using teak wood(MP Teak) |
| 15 | Short side rails using Teak wood (MP Teak) |
| 16 | Stiffiners using Teak wood (MP teak) |
| 17 | Applying two coat of french polish (ready made) to article after necessary prepartion of surfaces |
| 18 | BED PLY WOOD TOP (FD- 246):- M & L for carrying out repair/replacement of following parts of Bed Ply Topas per drawing after dismantling the old parts complete all as specified and directed. |
| 19 | S & FLong rail made out of first class hard wood (Teak). |
| 20 | S&F short rails made out of first class hard wood (Teak) as per drg |
| 21 | Head Board complete with legs as per sample |
| 22 | Foot Board complete with legs as per sample. |
| 23 | S & F Ply wood top made out of 12mm thick commercial ply wood of ISI marked . |
| 24 | Teak Face Ply of Size 04mm Of Head Wing Board |
| 25 | Teak Face Ply of Size 04mm Of foot Wing Board |
| 26 | Stiffner made out of Teak wood as per sample |
| 27 | Cleaning and preparingold polished surface of Bed ply top and apply two coats of french polishing to give a glossy finish complete allas specified and as directed by Engineer-in-Charge. |
| 28 | TEAPOY (FD-382 , FD-278):- M & L for carrying out repair/replacementfollowing parts of teapoy , complete all as specified and shown on drgs after removing the old broken part. |
| 29 | S & Ftop of 18/19 mm thick prelaminated particle board ISI Marked Make( Action / tesa /arched /novapan) exterior grade and 6 mm thick teak edging all around. |
| 30 | S & Flong rails of teak wood all as per drawing.. |
| 31 | S & Flegs of teak wood all as per drawing.. |
| 32 | S & Fstiffners of teak wood all as per drawing.. |
| 33 | Cleaning and preparingold polished surface of teapoy and apply two coats of french polishing to give a glossy finish complete all asspecified and as directed by Engineer-in-Charge. |
| 34 | TABLE CENTRE/TABLE CENTRE TWO TIER ( FD-274) M & L for carrying out repair/replacementfollowing parts to table centre, complete all as specified and shown on drgs after removing the old broken part. |
| 35 | Top 900x450mm made out of 18mm thick prelaminated particle board exterior grade,Make : action tesa/arched/novapanISI marked fixed with mild steel screws as per size and shape including4mm thick teak wood beading all around. |
| 36 | S & F Legsmade out of first class hard wood (Teak) |
| 37 | S & F Long railsmade out of first class hard wood (Teak) |
| 38 | S & F Short railsmade out of first class hard wood (Teak) |
| 39 | S & F Stiffners of table centermade out of first class hard wood (Teak) |
| 40 | Cleaning and preparingold polished surface of table centre and apply two coats of french polishing to give a glossy finish complete all asspecified and as directed by Engineer-in-Charge. |
| 41 | S&F of ply wood of 6mm thick commercial for 2 tire table |
| 42 | TABLE DINING FOR 6 PERSONS (FD-273) M & L for carrying out repair/replacementfollowing parts to table dining for 6 persons, complete all as specified and shown on drgs after removing the old broken part. |
| 43 | Top 1500x900mm made out of 18mm thick prelaminated particle board exterior grade, Make : action tesa/arched/novapanISI marked fixed with mild steel screws as per size and shape including4mm thick teak wood beading all around. |
| 44 | S & F Legssquare shape made out of first class hard wood (Teak). |
| 45 | S & F Long rails made out of first class hard wood (Teak) |
| 46 | S & F Short rails made out of first class hard wood (Teak) |
| 47 | Triangular wooden bracket 100X100X20mm thick |
| 48 | Cleaning and preparingold polished surface of table dinning 8 pers and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge. |
| 49 | SOFA SET THREE SEATER/SINGLE SEATERWITH DETACHABLE CUSHION (FD-281/FD-373) M & L for carrying out repair/replacement of following parts of Sofa set three seater /single seater with detachable cushionas per drawing after dismantling the old parts complete all as specified |
| 50 | S & F of long rails of seat for three seater sofa of size 1590mmx100mmx35mm of 1st class hardwood (teak) duly plained and smoothed with sand paper. |
| 51 | do but Side rail of back size 575mm x 100mm x 35mm. |
| 52 | All as per Srl Item no.10 above but back long rail of back of size 1590mm x 70mm x 35mm. |
| 53 | do but Side rail of sea but single seat size 575mm x 100mm x 35mm. |
| 54 | All as per Srl Itemabove but back of single seat long rail of back of size 575 mm x100mmx35mm. |
| 55 | S & F in replacement of arms for Single / Three seater sofa of size 35mm x 70mm (cross section) of 1st class hard wood (MP Teak) complete all as specified and shown on drgs after removing the old broken arms. |
| 56 | do but batten of size 50mm x 20mm. |
| 57 | M & L for applying two coat of french polish after preparation of surface complete to sofa 3 seater |
| 58 | M & L for applying two coat of french polish after preparation of surface complete to sofa single chair. |
| 59 | S & F sofa foam cushion 40 density, 100mm thick of standard size covered with tapestry clothas approved by GE. MAKE : SLEEP WELL/COOL FOAM/FEATHER FOAM. Foam Cushion cover only duly stiched and one side Jip size 530 x 560 mm as per sample approved by engineering in charge. |
| 60 | Chair writing/CBA (FD-280&250) M & L for carrying out repair/replacement following parts toChair writing/CBA, made out of 1st class hard wood (Teak) complete all as specified and shown on drgs after removing the old broken part. |
| 61 | S & F Front Legs. |
| 62 | S & F Rear Legs. |
| 63 | S & F Front Rails. |
| 64 | S & F Side Rails. |
| 65 | S & F Back Rails. |
| 66 | S & F Arms. |
| 67 | S & F Stiffners. |
| 68 | M & L for applyingtwo coats of french polish to Chair writing/CBA after preparation of surface complete all as specified. |
| 69 | Chair Dinning (FD-279) S & F in replacement following parts toChair Dinning/CBB, made out of 1st class hard wood (Teak) complete all as specified and shown on drgs after removing the old broken part.M & L for carrying out repair/replacement of following parts of Chair Dining as per drawing after dismantling the old parts complete all as specified |
| 70 | S & F Front legs. |
| 71 | S & F Rear Legs. |
| 72 | S & F Front Rails. |
| 73 | S & FSide Rails. |
| 74 | S & F Back Rails. |
| 75 | S & F Stiffners. |
| 76 | M & L for applyingtwo coats of french polish to Chair Dinning/CBB after preparation of surface complete all as specified. |
| 77 | Chair Easy (FD-229) S & F in replacement following parts toChair easy/CBB, made out of 1st class hard wood (Teak) duly french polished complete all as specified and shown on drgs after removing the old broken part.M & L for carrying out repair/replacement of following parts of Chair Dining as per drawing after dismantling the old parts complete all as specified |
| 78 | S & F Frontlegs |
| 79 | S & F Rearlegs |
| 80 | S & F Front Rails of seat. |
| 81 | S & F Rear Rails of seat. |
| 82 | S & F Side Rails of seat. |
| 83 | S & F Back Rails of Back. |
| 84 | S & F Side Rails of Back. |
| 85 | S & F Arms of Chair easy |
| 86 | M & L for applyingtwo coats of french polish to Chair Easy after preparation of surface complete all as specified. |
| 87 | Recanning of Chairs of all type M&L for removing old broken cane and recanning of Chairs with plastic cane (oval shape) 2mm wide and border with 3mm/4mm wide cane complete as per Godrej pattern using Make : SHAH/RPEMIER brand cane (removing of old broken cane shall be done at BSO yard) as per specified in drg. |
| 88 | Recanning ofchair writing (FD-280&1107) |
| 89 | Recanning of chair dinnig (FD-279) |
| 90 | Recanning of chair easy(FD-229&1108) |
| 91 | TABLE DINING120X90 CM (FD-284) M & L for carrying out repair/replacementfollowing parts to table diningcomplete all as specified and shown on drgs after removing the old broken part. |
| 92 | S&F Top of the table with18/19mm thick prelaminated particle board , Make :( action tesa/arched/novapan) ISI marked exterior grade as in top of the table including6mm thick teak wood beading all around. |
| 93 | S & F Legs of teakwood . |
| 94 | S & F Long rails of teak wood. |
| 95 | S & F Short rails of teak wood. |
| 96 | S&F Triangular wooden bracket as per Drg. |
| 97 | Cleaning and preparingold polished surface of table dinningand apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge. |
| 98 | PEG TABLEM&L for carry out repair/replacement of following parts of peg table as per drawing after dismantling the old parts complete all as specified:- |
| 99 | S&F Top with18/19mm thick prelaminated particle board , Make :( action tesa/arched/novapan) ISI marked exterior grade as in top of the table including6mm thick teak wood beading all around. |
| 100 | S & F Legs of teakwood . |
| 101 | S & F Long rails of teak wood. |
| 102 | S & F Short rails of teak wood. |
| 103 | Applying two coat of french polishto complete peg table afternecessary preparation of surfaces. |
