|
| 1 | Disconnectingdosingplantany model any capacity alongwith components, dismantling and segregation of all parts for repair/replacement of defective part, cleaning, washing/reassembling the plants, connecting in position and testing complete all as directed by Engr-in-charge (Spares will be measured and paid under item No 02 to 13). Note :- All the repairs required and pertain to dosing plant shall be carried out & ensureat the concern installations by the contractorRep upto smooth functioning of the same. Non taken over site by the contractor and delay in repair if noticed the recovery shall be made Rs 500/- per day fromcontractor bill till complete the job because of unchlorinated water cannotbe Supplied to the troops complete all as specified and directed by Engr-in-charge. |
| 2 | Supply only suction valve assy complete of dosing plant(liquid end) as per sample. |
| 3 | Supply only discharge valveassy complete. |
| 4 | Supply only diaphragm for dosing plant(liquid end) as per sample. |
| 5 | Supply only foot valve assembly for dosing plant (liquid end) as per sample. |
| 6 | Supply only NRV assembly for dosing plant as per sample |
| 7 | Supply only head for dosing plant (liquid end) as per sample. |
| 8 | Supply only tubing for dosing plant including all accessories (liquid end) as per sample. |
| 9 | Supply only Injector valve including fitting as per sample. |
| 10 | Supply only PCB for dosing pump as per sample. |
| 11 | Supply only impeller of agitator blade made of PVC all as per sample. |
| 12 | Supply only extended agitator shaft of non-corrosive material all as per sample. |
| 13 | Supply only complete Set of \"O\" rings. |
| 14 | Dismantelling of old burnt motor of dosing plant 960 RPM and rewinding with super enamelled copper wire with replacing all unserviceable parts of motor for making it as serviceable including fixing new ball bearing etc complete all as specified and directed by Engr-in-charge. (Note :- Spare part shall be included in quated rate). |
| 15 | Repair/Replacementof chemical decrin dosing pump (model no. C 24.121) Non-metalic diaphragm type for injection of dixinfection of water treatment injection capacity @ 14.5 LPH (type MAGDO/MD/20/40) having 14.5 LPH at 13 kg/cm2 (bar) discharge working pressure solenoid driven electrically control 220 volts maximum current 01 Amps,with IP 65 protection and \"F\" class insulation with standard fittings with stoke length suitable from 0-100% and stock frequency suitable from 0-to 100% minimum, included all accessories such as football line injection valve suction valve deliveryvalve and PE tubing consistencey in performance, complete all as specified and directed by Engr-in-charge. Make :- JESCO/Declibac |
| 16 | Supply and filling in dozing plant calcium based, high strength chlorination chemical for water disinfectant in granular form in factory sealed HDPE container (40 to 50 Kg each), chlorine concentration level 65-70% complete all as specified and directed. |
| 17 | Supply only soda Ash (crystal Grade) 1 of best quality incorporated for improvement of swimming pool water complete all as specified and directed. |
| 18 | Supply only Alam Crystal Grade 1 of best quality incorporated for improvement of swimming pool water complete all as specified and directed. |
| 19 | Supply only copper sulphate Crystal Grade 1 of best quality incorporated for improvement of swimming pool water complete all as specified and directed. |
| 20 | M/L for bacteriological and chemical analysis of water (sample of borewell water) from DIRECTOR OF HEALTH SERVICES, ENVIRONMENTAL AND POLLUTION CONTROL WING, PathankotNOTE :- (a) The water sample shall be carried in sterilised bottle/watercan which will be issued by DIRECTOR OF HEALTH SERVICES, ENVIRONMENTAL AND POLLUTION CONTROL WING, Pathankot(b) The rate quoted shall be deemed to includingude transportation cost & cost of sterilised bottle |
| 21 | Supply and filling in item No-S411AE, item type C, item name STEQUA411 AE refill, of Declibac specification :- Chlorine tablets contained in plastic cylindrical sealed disposible sanitiser refill for disinfection of drinking water with arrengements of controlled release of disinfection in weter, suitable for operation through recommeneded dosing system. replacement indication- visual and weight variation operation type non contact non inhalatory, heavy metal contaminants (like Hg and Pb) in product madia must be below detection limit (BDL) and product must pass through acute toxicity test, based on which the product must be considered safe to use from human health safety point of view when use in recommended dosage, all as specified and directed . Make :- Declibac technologies Pvt Ltd/Potter and watts/Brio Zing as approved |
| 22 | Supply & installation in replacement of old dosing tank model No- ADS-1 (having 100 ltrs FRP tank with inbuilt motor and agitator) capacity 100 Ltrs MOC:PE/FRP.Lid containing port hole for pouring chlorination chemical and water when necessary. Provision for mounting of motor at proper angle provision for mounting dosing pump on lid, level gauge, make :- DECLIBAC/AQUAFIT/PURICHLOR. |
| 23 | M&L for Repair of solar water heater capacity upto 500 LPDafter carefully opening of different tubes, electricalconnectionand unscrewing of nuts and bolt from foundation, refixing the same after cleaning and serviceable complete all as specified and directed. |
| 24 | Supply and replacement3 layer PP-R polypropylene random copolymer concealed pipe 25mm dia SDR 7.4(PN-1.6) UV stablised and antimicorobial fusion welded having thermal stability for hot and cold water suppy all PP-R plain & brass threaded polypropylene random fittings laid in trenches including taking outall as specified and directed by Engr-in-Charge. |
| 25 | Supply and replacement3 layer PP-R polypropylene random copolymer concealed pipe 20mm dia SDR 7.4(PN-1.6) UV stablised and antimicorobial fusion welded having thermal stability for hot and cold water suppy all PP-R plain & brass threaded polypropylene random fittings laid in trenches including taking outall as specified and directed by Engr-in-Charge. |
| 26 | S&F in replacement of broken flat collector plates tinted glass of solar panel (length and size as per existing sample) new one including lifting from floor to roof of the building by manually or mechanically is included in the coated rates complete all as specified and directed. |
| 27 | M & L for Rubber flexible Hose pipe of dia as per existing heat resistance type suitable for Solar plant of diff capacity with suitable clamps, nut and bolts complete all as specified and directed. |
| 28 | Supply and replacement Evacuated heat tubeof any size by taking out the broken tube complete. |
| 29 | Supply and replacement PP-R gate valve brass inserted 25mm dia. |
| 30 | Supply and replacement PP-R gate valve brass inserted 20mm dia. |
| 31 | Supply and replacement Rotation moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position of capacity 500 litre including taking down unsv/ broken tank. |
| 32 | S & F tank nipple after makingproper hole in inlet and outlet portion all as specified. |
| 33 | S & F Floatvalvewith iron rod andball20mm dia. |
| 34 | Supply and replacement of heating element 3000 watt for solar water heater. |
| 35 | Supply and replacement of thermostat suitable for solar water heater. |
| 36 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated 3 core stranded copper conductor servedwith an inner sheathing of PVC tape PVC sheathed 2.5 sqmm nominal cross section in service connection/light connections in solar water heater, including taking out old unserviceable cable complete all as specified and directed by Engr-in-charge. |
| 37 | Supply and fix or laying in trenches PVC pipe 25 mm dia heavy duty for cable protection/fixing of garden lights etc, of the following sizes including necessary tee/elbow/junction box etc. provision for cable entry if reqd in garden lights complete including taking out old unserviceable pipe as required complete all as specified and directed by Engr-in-charge. |
| 38 | Repair to washing machine Hydro extractor of cap 30 Kgs 3 ph 415 volts 50Hz AC complete and after completion of work testing of the machine all as specified and directed by Engr-in-Charge. (Note :- Defective major components/spares elaborated hereafter in respecive item of schedule shall be measured as supply only) |
| 39 | Supply only LS contactor 3 pole 220 volts suitable for 30 Kgs. |
| 40 | Supply only Selector 800 SMR complete for dryer of capacity 30 kgs as per sample. |
| 41 | Supply only IBLAR sleeves for 30 Kgs washing machine as per sample. |
| 42 | Supply only IBLAR bearingfor 30 Kgs washing machine as per sample. |
| 43 | Supply only single phase preventor suitable for 30 kgs washing machine as persample |
| 44 | Supply only Relay 2.5 Amp to 6 Amp for Dryer Machine Motoras per sample |
| 45 | Supply only Stainless steel spring assy for 30 Kgs laundry machine as per sample. |
| 46 | Supply & fixing of the following partsfor washingMachine Hydro extractor of cap 25 Kgs and Tumblerdrying machinme 25 Kgs, three ph 415 volts, 50 Hz AC complete and servicing, greassing and gland dori for motor and testing after completion of work all as specified and directed by Engr-in-Charge. (Note :- Defective major components/spares elaborated hereafter in respecive item of schedule shall be measured as supply only) |
| 47 | Supply only IBLARbearingfor 25 kgs washing machine as per sample |
| 48 | Supply only Single phase preventor suitable for 25 kgs washing machine as per sample |
| 49 | Supply only Pressue switch suitable for 25 kgs washing machine as per sample. |
| 50 | Supply only Pressue switch pipesuitable for 25 kgs washing machine as per sample. |
| 51 | Supply only door open/close sensor for loundry machine dryerof capacity25 kgs as per sample all as specified and directed. |
| 52 | Supply only Stainless steel spring assy for 25 Kgs laundry Machine and Dryer assy as per sample all as specified and directed. |
| 53 | Supply and fixing cast iron non return valve 150 mm bore dia flanged ends drilled holes including jointing material such as rubber gasket, bolts, nuts and washers of suitiable size complete all as specified and directed. Make :- L&T/Upadyay/Zoloto |
| 54 | S & F in Repair/Replacement of retro reflective informatory sign board of size 1200x900 mm made out of 3 mm thick aluminium composite sheet, both faces to be fully covered with high intensity encapsulated lens type retro-reflective sheeting (as per sample). Letter, symbols, borders etc. as per requirement will be as per IRC -67 with required colour scheme on the boards with the high intensity grade A. SS sheet to be riveted/welded to stainless steel squre frame of 30x30 mm and fixed on 2 Nos of 50 mm dia stainlees steel 3m post with caps on top of SS grade 304. The board will be fixed & welded to the frame and fixing in ground with PCC 1:3:6 after necessary earth work of size 60x60x90 cm in any type soil complete all as directed. |
| 55 | Supply and fixedMCCB 160 amps 3 pole 25 KA adjustable type magnetic setting and fixing in exisiting DB and making connection with cable by means of suitable size of thimbles complete all as specified and directed. |
| 56 | Supply and fixedMCCB 200 amps 3 pole 36 KA adjustable type magnetic setting and fixing in exisiting DB and making connection with cable by means of suitable size of thimbles complete all as specified and directed. |
| 57 | Supply and fixedMCCB 250 amps 4 pole 36 KA adjustable type magnetic setting and fixing in exisiting DB and making connection with cable by means of suitable size of thimbles complete all as specified and directed. |
| 58 | Supply and fixedMCCB 400 amps 4 pole 35 KA adjustable type magnetic setting and fixing in exisiting DB and making connection with cable by means of suitable size of thimbles complete all as specified and directed. |
