|
| 1 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202.(Excluding GST) |
| 2 | Excavation of foundation in ordinary soil (Ioam clay or sand) including lift upto 1.50 meter and lead up to 30meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge up to a distance of 30 meters from the foundation trenches.as per S.I. No. 251(Excluding GST) |
| 3 | Fillling in foundation trenches as per drawing and technical specification Clause 305.3.9 (Excluding GST) |
| 4 | Providing and laying Cement Concrete 1:3:6(1 cement :3sand : 6graded brick aggregate 40 mm nominal size) including supply of all materials, labour and T&P etc. required for proper completion of work and curing complete, also including cost of formwork in foundation and floors as per SI no.281 (Excluding GST) |
| 5 | Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and Technical Specifications (Excluding GST) |
| 6 | M-30 Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 (Excluding GST) |
| 7 | Supplying, fitting and placing MS bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 (Excluding GST) |
| 8 | Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 (Excluding GST) |
| 9 | Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications (Excluding GST) |
| 10 | Providing and laying pitching on slopes laid over prepared filter media including boulders apron laid dry in front of toe of embankment complete as per drawing and Technical specification.Morth Spe. 2504 (Excluding GST) |
| 11 | Construction of embankment with approved material deposited at site from road way cutting and excavation from drain & foundation of other structure graded and compacted to meet requirement of table No. 300-2 with a lead upto 0.00 m as per technical specification clause 301.5 (Excluding GST) |
| 12 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 with lead upto 1000m as per tech. speci. clause 303.1, including stablization with 2% slaked lime including its mixing with rotavator complete two layers. (Excluding GST) |
| 13 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader/Tractor mounted appropriate equipment on prepaire suface mixing by mix in place method with rotavator at OMC, and compacting with smooth roller to achieve the desired density, complete as per clause 401 (Excluding GST) |
| 14 | Providing, laying, spreading and compacting stone aggregates of specific sizes(45-63 mm and 10 cm thickness on soling road) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled 80-100 kN static rollar in stages to proper grade and camber, applying and brooming stone screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.grade 1 as per Technical specification clause 405. (Excluding GST) |
| 15 | Providing laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled 80-100 kN static roller in stage to proper grade and camber, (Excluding GST) |
| 16 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mannual means, as per technical specification cluause 502 (Excluding GST) |
| 17 | Providing and applying Tack coat with bitumen using emulsion distributor at the rate of 0.35 kg per sqm on the prepared bitumunous surface cleaned with hydraulic broom as per technical specification clause 503 (Excluding GST) |
| 18 | Providing and laying and rolling of open geaded premix surfacing of 20mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a prev (Excluding GST) |
| 19 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type C seal coat as per TS Clause 510 (Excluding GST) Please Enable Macros to View BoQ information |
