|
| 1 | Excavation in post holes (or similar holes ) each n.exc 0.5, getting out inhard rock complete all as specified and directed. |
| 2 | Excavation over area, n exc 1.5 m deep and getting out in hard rock complete all as specified and directed |
| 3 | Excavation over area, exc 1.5 m deep but n exc 3.0 m deep and getting out in hard rock complete all as specified and directed |
| 4 | Excavation in trenches n exc 1.5 m wide and n exc 1.5 m deep for foundation in hard rock complete all as specified and directed. |
| 5 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm inany type of soil complete all as specified and directed. |
| 6 | Removing excavated material i.e any type of soil n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting piont complete all as specified and directed. |
| 7 | Forming embankments including raising (or lowering) earth,, spreading in layesrs n exc 30 cm thick, watering, ramming / rolling and finishing to required size, shape etc, n exc 1.5 m high from base complete all specified and diected. |
| 8 | Removing excavated material i.e any type of Rock n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting piont complete all as specified and directed. |
| 9 | M & L for moorum /red bajri filling in floors or paving laid in layers n exc 15 cm thick, spread, levelled and rammed including watering. |
| 10 | M&L for Cement concrete 1:4:8 type D2 using 40mm graded stone aggregate in foundation filling and mass concrete etc complete all as specified and directed. |
| 11 | M&L for PCC type B-0,1:2:4 (12.50 mm graded stone agregate ) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 12 | M & L for walling of random rubble uncourced masonary, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed. |
| 13 | M&L PCC (1:4:8), type D-2 (using 40mm graded stone aggregate) as in sub base 75mm thick complete all as specified and directed. |
| 14 | M & L Machine pressed precast coloured concrete glossy finished interlocking paver block any shape and size of 60mm thickness, M-35 Grade conforming to IS-15658-2006 with grey cement and pigment complete all specified and directed. |
| 15 | M & L Sand filling under floors or in foundations including watering and consolidation. |
| 16 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, uffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., |
| 17 | S & F of 12 mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 18 | M & L 15 mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 to be finished even and smooth withoutusing extra cement complete all specified and directed. |
| 19 | M & L for preparing surface of newly plasteredwalls and applying two coats of Cement based paint over a coat alkali resistant primer complete all as specified and directed. |
| 20 | M&L PCC (1:3:6) type C-2 using 40mm graded stone agg as in fdnfilling and mass concrete as in base / columns etc all as specified and directed . |
| 21 | S&F MS work in truses / purlin rafter,post,plate etc including ERW or induction butt weldedtube conforming to IS-1161-1979 Gde S-240 complete all as specified. |
| 22 | S&F mild steel screw bolts(machine made)11 to 15 mm dia with hexagonal or square headat one ends and screwed the other ends, orscrewed bothends to be fitted with washer and one hexagonal screwednuts, exc 5cm but n.exc 100 mm long complete . |
| 23 | M&L Pre Painted galvalumealumunium Zinc coating GI based corrugatedsteel sheet0.50mm thick of an colour having tensile strength of550MPa as in roof covering/cladding to wall fixed with shelf tapping screw as specified. |
| 24 | M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridge fixed with self tapping screws as specified. |
| 25 | M &L Two coat of synthetic enamel paintover a coat of red oxide primer to new steel surfaces including preparationexc 10 cm width or girth incl all complete all as specified |
