|
| 1 | Supplying and fixing 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S&F 3 nos DIN type HRC fuse. Make - L&T/Siemens. 125A |
| 2 | Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Make-Legrand/ Siemens of the following sizes as to GS. 4 way Enclosure upto 160 Amp |
| 3 | Supplying and fixing 415 V four pole MCCB of breaking capacity 25kA/35kA with fixed thermal and fixed magnetic/adjustable thermal and fixed magnetic setting in existing DBs/ enclosure and necessary connection Make-Legrand, as to GS. 125 Amp |
| 4 | Supplying and fixing 240/415V, MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection Make-Legrand/ Siemens as to GS. 63A TP MCB |
| 5 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded \"FRLS\" PVC insulated & unsheathed copper wire (Finolex/ Havells/KEI approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded \"FRLS\" PVC insulated & unsheathed copper wire for ECC, with drop Concealed type if reqd as per direction of EIC to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175 mm x 100 mm x 65 mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. Average run 10 mtr |
| 6 | Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required. 150 mm x 100 mm x 65 mm |
| 7 | 200 mm x 150 mm x 65 mm |
| 8 | 240 mm x 200 mm x 65 mm |
| 9 | 415 mm x 200 mm x 65 mm |
| 10 | Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. (At ANW-1, PNW-1 & Labour room) 6 Module |
| 11 | 12 Module |
| 12 | Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required. (At ANW-1, PNW-1 & Labour room) |
| 13 | Supply & Fixing 240 V 16 A Piano key type switch (Brand approved by EIC) on GI Modular type switch board having top cover plate and making necessary connections as required. (At ANW-1, PNW-1 & Labour room) |
| 14 | Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (At ANW-1, PNW-1 & Labour room) |
| 15 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (At ANW-1, PNW-1 & Labour room) |
| 16 | Blank Plate FOR Modular box. (At ANW-1, PNW-1 & Labour room) |
| 17 | Supply & Fixing 240 V, 1 x 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F150 x 100 x 65mm MS (16SWG) switch board and bakelite /perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. |
| 18 | Distribution wiring in 1.1 KV single core stranded \"FRLS\" PVC insulated & unsheathed copper wire (Finolex / Havells/ KEI / Gloster /approved by EIC) in 20mm / 25mm size PVC rigid conduit \"FR\" (Precision make) incl. necy. fittings as required. 2 x 2.5 sqmm + 1 x 1.5sqmm (for Power plug) |
| 19 | Supplying of 1.1 KV Grade following sizes Al. Armoured PVC/ XLPE Cable ( Make : Havells/ Glostar/ KEI/PWD Approved ) as per direction of EIC 4 core 25 sqmm (from VTPN to Autoclave starter) |
| 20 | 4 core 50 sqmm (from Panel to VTPN) |
| 21 | Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting |
| 22 | Laying of cable from 4core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting |
| 23 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. 4 core 25 sqmm |
| 24 | 4 core 50 sqmm |
| 25 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials . 4 core 25 sqmm |
| 26 | 4 core 50 sqmm |
| 27 | S&F angular holder (Anchor) on 3\" wooden double round block incl. S&F 9 Watt LED lamp Philips make.as per direction of EIC |
| 28 | Supply & Delivery of 4 feet single commercial LED type fluorescent light fittings complete with all accessories similar to Philips make cat No. TMC 501 P1 x T - LED 22 W P3 241 with Master LED Tube lamp of 1200 mm , 18W 865 T 81- 2100 ln corresponding to Wipro / Bajaj / Crompton/ Havells / PWD approved as per direction of EIC. |
| 29 | Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. |
| 30 | Supplying & Fixing 2\" x 2\" recess mounted LED lumineries made in CRCA sheet metal with wide light window and also with an opaque acrylic diffuser for a spot less and vgrade free uniform lighting and the fitting complete with all accessories to Crompton make Cat no - LCTLRP-36-FO-CDL 2 x 2 PLR 18-42 watt LED (with 5 years warranty) 36 watt corresponding to Philips/Bajaj/Havells as per direction of EIC |
| 31 | Supply of exhaust fan (Make -- EPC, Heavy duty/equivalent make) of following sizes as per direction of EIC. 30 cm (12\"), 1420 RPM |
| 32 | 38 cm (15\"), 1420 RPM |
| 33 | 45 cm (18\"), 1420 RPM |
| 34 | Fixing only exhaust fan after making hole in wall and making hole in wall good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of dia. 30 cm (12\") |
| 35 | 38 cm (15\") |
| 36 | 45 cm (18\") |
| 37 | Shifting & re-fixing Autoclave machine Starter M S Box. fixed in wall on flate iron frame, with spring washer, nuts etc with this box for termination of power to as per requirement & direction of EIC |
| 38 | Supply & Delivery of 23 V , 50 Hz , 24\"\" (600 mm) Sweep Three Blade/ Four Blade , 160W max consumption Air circulator type wall mounted Fan and Fixing the same on wall with S&F rug bolts 4 nos , double nut tightening (9 mm dia X 90 mm long approx). Make :- Almonard , EPC , Aerocon etc. (At DEIC) |
| 39 | Supply of 250 V 50 HZ high flo oscillating type metal body Wall Bracket( Tornedo - 2 ) fan operated by pull cord switch with inbuilt regulator ( Make -CG/ Orient/ PWD Approved) 18\" (450 mm). (For DEIC) |
| 40 | Fixing of Wall Bracket on wall with necessaryS&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length etc to complete the installation and mending good the damages as per direction of EIC. (At DEIC) |
| 41 | Supply & Fixing 230V, 50/60Hz, 40A 2NO Modular Contactors into existig Timer box, Make - L&T (CAT No. AUMC2004003) / PWD approved. |
| 42 | Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. Without angle iron support. 100x50x1.25mm (18SWG) |
| 43 | Earthing with Copper plate (610x610x3mm size) having weight of 9.84 Kg and 1 No. 25x5mm Copper strip (3.20 mt long) & 1 no. 6 sqmm PVC insulated stranded Copper wire (4 Mt long) incl. S & F 15 mm dia GI pipe (ISI-Medium) protection (4 mt. long) to be fillied with bitumen, partly under the ground level & partly above ground level to an average depth of 3.65 Mts. below the ground level and restoring the surface duly rammed incl. providing 3.0 mt long, 25 mm dia GI pipe (ISI-Medium) for periodic treatment, incl. providing masonery enclosure on the top of the earth electrode of overall size 86.36x86.36x46cm deep (below Ground level) complete with cemented brick work (1:6) of 25 cm width, duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56x35.56cm with locking arrangement, GI reducer and treatment of soil by using salt & charcoal or coke for plate electrode. |
| 44 | Supply & fixing 25x5mm Copper strip (12 mtr length) |
| 45 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. 25 mm dia |
| 46 | 40 mm dia Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe as to GS. Please Enable Macros to View BoQ information |
