|
| 1 | Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc |
| 2 | Demolition cement concrete (reinforced) of any description and in any position complete all as specified and directed. |
| 3 | Dismantling posts or struts (wood, steel or R.C.C.) any section,including taking out embedded portion embedded in concrete, brick work, masonary etc,and making good disturbed ground complete all as specified and directed. |
| 4 | Dismantling fencing wire mesh, any type any size complete all specified and directed. |
| 5 | Dismantling of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortarin floor, aprons etc complete all as specified and directed. |
| 6 | Dismantling wrought iron or mild steel workofanydescriptionnot otherwise provided for complete all as specified and directed. |
| 7 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness thickness (below or above ground level) anddisposal of all bldg Materials to out side MOD land as per NGT guide line complete all as specified & directed.. |
| 8 | Dismantling of Plain or corrugated steel sheeting, translucent, polycarbonate sheet or any type of sheet, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 9 | S&F Framed work such as grills, gratings, etc.. with ends of bars shoulderedand/orriveted, orforgedintospikes;framed guardbars;barredirondoors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 making good of dismantled portion by plastered/concrete work and match with existing surface complete all as specified and directed. |
| 10 | S&F pre-painted galvatume aluminium zinc coating GI based corrugated crimp curvedsteel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 11 | S&F for 2 mm thick fibre glass reinforcement translucent plain / corrugated sheeting fixed with coach screw and washers in roof, wall etc complete all as specified and directed. |
| 12 | S&F 0.8 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed. |
| 13 | Dismantling wood of any description Scantling / frame Work / trusses/purlin/ rafter/rails/ festenings /beam/posts/door frames etc of any size and shape complete all as specified and directed. |
| 14 | Providing and fixing at site Factory Made 24 mm thick 100% Solid WPC (Wood polymer Composite ) Plain Jali cut on CNC machine of approved design & Colour, measured size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm manufactured by an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with MS Hollow pipes frame & MS Square bar incl stainless Steel Screws / Fastners or required length all as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company.(Note : Payment of MS hollow pipe/MS angle will be paid in seperate items) |
| 15 | Excavation of post holes (or similar holes) in Soft / loose soil eachn exc0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc50m and making good final finished surface complete all as specified and directed. |
| 16 | M&L Cement concrete type B2 1:3:6 (40 mm graded aggregates) in foundations, filling and mass-concrete incl required formwork complete all as specified and directed. |
| 17 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shapeas directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 18 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etcincluding provision of binding wire complete all as specified and directed. |
| 19 | Supply only chain link MS galvanised fencing, any size, shape or any type complete all as specified and directed by Engr-in-charge. |
| 20 | M&L rendering 15mm thick in Cement Mortar 1:4 on fair faces of brick or concrete, external surfaces of walls finishedand even & fair without using extra cement complete all as specifed & as directed. (incl new brick work) |
| 21 | M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand : 2 white marble stone chipping 10mm nominal size with colour compound) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings incl Forming groove of uniform size 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed. |
| 22 | M & L for preparing the newly plastered wall surface and applying primer with applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sq( Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work, as required. ) complete all as specified and directed. |
| 23 | M&L Granite (of any type) tiles 20mm thick (approved colour) machine cut,bedded with 15 mm screed bed in cement mortar 1:6 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 24 | M&L 20 mm thick granite (of any type) (approved colour) machine cut as in vertical surfaces and skirting/ dado over including 15 mm thick rendering in CM 1:4 jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding and polishing complete all as specified. |
| 25 | M&L 100mm thick PCC 1:4:8 type D-2 using (40mm graded aggregate) as in sub base of floor complete all as specified and directed. |
| 26 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 27 | Providing edge moulding to 18 - 20 mm thick stone of any description of counters vanities etc incl machine polishing to edge to give high gloss finish etc complete all as specified and directed. |
| 28 | M&L for reinforced cement concrete (Nominal Mix) type B-1 1:2:4 using 20 mm graded aggregates as in slab supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, deck slab and in shelves and the like complete all as specified and directed. |
| 29 | M&L for use and waste of Form work to soffits of suspended slabs as roof slabs, floor slabs, landings and similar work n.exc 200mm thick Horizontal or sloping surface for rough finished surfaces of flat concrete complete all as specified. |
| 30 | M&L for Form work to edges of concrete flats, treads, breaks in floors, windows cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide ans sides of RCC/ PCCbands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide for rough finished surfaces of concrete complete all as specified. |
| 31 | M&L MS TMT bars 10mm dia and over, cut to length, bent to shape required,including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clipsall as directed by Engr-in-Charge. |
| 32 | S & F forFramed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.. |
| 33 | M&L providing cement concrete type B1, 1:2:4 (20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps, seism and other similar bands, plinth courses, string course, lacings courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightlyround or chamfered angles and thorating all as specified and directed. |
| 34 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded aggregates) as in plinth protection laid to slope 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and incl all necessary form work to divide the area in panels, finishing exposed edges rough or rounding or chemferring where directed and providing 6 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand (all by wt.) complete all specified and directed. |
| 35 | M&L for two coats of synthetic enamel paint over a coat of Red oxide primer on new Steel Surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed. |
| 36 | M&L for Onecoats of synthetic enamel painton old Steel Surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed. |
| 37 | Providing and fixing at site factory made kerb stone of required shape and size of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3(1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and incl dismantling of existing kerb stone complete all as specified and directed. |
| 38 | M&L for one coat of synthetic enamelled paintin anyapproved pattern and colourincluding preparation of new or previously untreated surfacesofKerb stone /concrete/plaster surfacesexceeding 10cm width or grith not other wise provided complete all as specified and directed. |
| 39 | M & L for complete removal of existing treatment from old decorated wall surface by scrapping by electrically operated grinder machine/electric regmal machine andapplying primer with applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sq( Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work, as required. ) |
| 40 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including allquoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete.. |
| 41 | M&L for Brick work with sub-class `B\" bricks, straight or curved on plan exceeding6 M mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 42 | M & L for providing precast cement concrete1:2:4 type B0 using 12.5mm graded aggregate louvres and jallies, 40 mm thick (measured solid), including all mouldingsset in CM 1:4 complete all as specified and directed. |
| 43 | Dismantling of RCC Jalli of any description and in position and unserviceable Jalli, incl frame/ coping removed from site and serviceable RCC Jalli stactaking at site after cleaning/dusting complete all as specified and directed by Engineer in Charge. |
| 44 | M&L for Providing and fixing precast cement concrete block type B1 1:2:4 (20 mm graded aggregates) in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar 1:4 complete with joints to match complete all as specified and directed. |
| 45 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement incl dismantling of existing railing complete all as specified and directed. |
| 46 | S& F in repair 75mm thick factory made SFRC manhole/ drain covers/ Kitchen GT cover of approved shape & size incl 2 No. of handles complete all as specified and as directed. |
| 47 | M&LMachine cut kota stone 20-25 mm thick in riser of steps, skirting, dado and pillar laid over 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the existing slab including rubbing and polishing complete all as specified and directed. |
| 48 | M&LMachine cut kota stone slab flooring 20-25 mm thick laid over 20 mm thick screed bed in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 49 | Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and as directed. |
| 50 | M&L for glazed coloured ceramic tiles in dado/vertical surface (300mm x600mm x 7-8 mm)thick set and jointed in neat cement slurry and pointed in white or colour cement to match over including screeding 10 mm thick in CM 1:4 on wall complete in all respect as specified. Colour and pattern approved by EIC). |
| 51 | M&L cement concrete 25 mm thick in PCC 1:2:4 (20 mm graded aggregates) as in sub base of floors finished fair and even complete all as directed |
| 52 | M & L Non skid coloured ceramic tiles 7-8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr in charge. (approved by EIC). |
| 53 | S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as directed (each line wire to be measured) |
| 54 | S&F in repairs, 4 mm thick aluminium composite panel(ACP) of approved quality and colour with minimum 0.025 mm thick aluminium foil and joints filled with silicon jel over necessary steel frame as incladding to cover the steel columns and beams complete all as specified and directed. (Note: Necessary steel supporting frame work for claddingshall be measured and paid separately under relevant items) (Note :- Only steel scaffolding is allowed and rate included in above item) |
| 55 | S&F stainless steel letter, comma, dash, logo etc of 600 mm height and 32 mm depth made of 1 mm thick stainless steel with seemless welding rubbed,brass colour polished and edges made smooth with necessary fixing device for lighting at night complete all as specified and directed. |
| 56 | S&F in repairs concertina coil fencing with punched tape concertina coil stretched to a length of 10 metres to achieve600 mm dia (weighing not less than 8.50 Kg per 10 RM of length),having 50 Nos rounds per 5.4 metre length,spring core wire (2.5 mm thick) of high tensile strength of 165 kg/sqmm with tape (0.52mm thick) and weight 43.478 gm/metre and fixing the same with existing Y-shape angle iron to steel parts and another coil/MS Nibs alloys shown on drgs incl fixing with special galvanised fastners such as clips, U clips all as speicified and directed. Note :- Linear length of coil after stretching and fixing shall be measured for purpose of Payment. |
| 57 | S&F Plates (Plain or chequered) (Fe-410 -W Gde E-250 quality-A) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment including all required assesseries complete all as specified. |
| 58 | S&F Steel work in tubular tru-sses of required shape including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 gradeSt.-240,complete all as specified and directed. |
| 59 | S&F Mild steel bolts of dia of neck exc 12 mm and n exc 20 mm, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted washers and one hexagonal or square nut exc 30 cm longcomplete all as specified and directed. |
| 60 | Excavation in trenches in soft/ loose soil not exceeding 1.5 m wide n.exc 1.5m depth for fdn etc for shaft, wells, cesspits, man holes, pier holes etc. n.exc 10sqm on plan and n.exc 1.5m depth and getting out in soft loose soil complete all as specified and directed. |
| 61 | Excavation in trenches in soft/ loose soil additional 1.5 m or part thereof in depth beyond the first 1.5 m (ref item 3006 above) depth for fdn etc for shaft, wells, cesspits, man holes, pier holes etc. n.exc 10sqm on plan and exc 1.5m depth and getting out in soft loose soil complete all as specified and directed. |
| 62 | M&L for returning, filling in, includingspreading, levelling, wateringand well ramming in layers not exc 25 cm on soft/loose soil complete all as specified and directed. |
| 63 | M&L for Removing surplus excavated material to a dist n exc. 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified & directed. |
| 64 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar incl cement conc bedding and haunching for 200 bore pipe. |
| 65 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar incl cement conc bedding and haunching for 300 bore pipe. |
| 66 | S&F 300 mm internal dia reinforced concrete pipes, class NP2, laid in trenches and jointed complete with collars as specified and directed. |
| 67 | M&L Concrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in cement conc 1:3:6 type C-2 for 300 mm bore of pipe complete all as specified and directed. |
| 68 | S&F 200 mm internal dia reinforced concrete pipes, class NP2, laid in trenches and jointed complete with collars as specified and directed. |
| 69 | M&L Concrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in cement conc 1:3:6 type C-2 for 200 mm bore of pipe complete all as specified and directed. |
| 70 | M&L for Dewatering/cleaning of manholes/septic tanks/ soak wells/sump wells (upto any depth) including bailing out water from it and removing sludge and blockages from inlet and outlet of sewer lines including taking out the excavated sludge and carting away the same to a distance far away from residential/office area and cover the same with fresh earth and recommissioning the same including site clearance to a distance of 3 Metre aroundcomplete all as specified and directed by Engineer-in-Charge. |
| 71 | Cleaning of deep sewage linesincluding desludging by Super SuckerMechanically operated truck mounted of25 tonne capacity with 12000 litres tanker andwater tankerfitted with high jet pressure machine with 8 working hours per day excluding stand by period and disposal of the sludge out side the MOD land as directed .Note :- (a) Per day means 8 working hours in a day excluding stand by period due to any reason.(b)In case contractor fails to attend the complaint and to deploy the machinewithin 24 hrs at site, a recovery of Rs 2000/- per day shall be madefrom his payment. |
| 72 | M&L for cleaning of all blockages of Nahani traps/floor traps/bottle traps, blockages of WC\"s, Rain water pipes, Rain water spouts at roof level, 100 mm dia CI pipes upto 1st manhole/GT in shafts, vertical CI soil/waste pipe stacks, CI Tee/door bends etc & cleaning of rcc/pvc drain pipes 150 mm to 300 mminternal diaby rodding and manholes upto 3.0 metre in depth and removal of sludge/silt/liquid mud sand (in foul conditions) etc, out of MOD premises (at thelocation notified by the local Municipal Corporation/Cantt board) complete all as specified and directed by the Engineer-in-Charge to maintain internal & external sewage system in functional state at all the time. The contractor shall engage required skilled manpower and provide all necessary tools and plants (manual/pressure cleaning pump and flexible rods and other necessary equipment (as per rules of public health), etc to ensure resolution of complaint in time frame as desired by Engineer-in-Charge. |
| 73 | M&L for Cutting in to existing man holes for connecting new drains for internal dia of pipe 225 mm, making good to pipe and rendering , cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1 : 2 :4 type \"B1\" smooth finished and reforming benching as requiredcomplete. All as directed and specified. |
| 74 | S&F of 10 mm thick polycarbonate sheet as in roof covering of pathway,Dome both side UV coated for50 micron thick, Weight of polycorbonate sheet 1.75 kg. per Sqm,colour as approved and fixedwith self -taping screws and aluminium strips as required at site and sealing the joints with liquid sealent complete all as diercted and specified. |
| 75 | M & L PCC 1:4:8 type D-2 (40 mm graded aggregates) as in Sub base, foundation filling and mass-concrete complete all as specified and directed. |
| 76 | M & L PCC 1:3:6 type C-2 using (20 mm graded aggregates) as in surface channel and drains etc including slightly rounded or chamferred angles as reqd complete all as specified and directed. |
| 77 | S&F in repair PUF insulated sandwich roof panel of required colour, thickness 60 mm, thickness of top & bottom sheet 0.8mm sandwiched with polyurethane foam, fixing of roof PUF panel incl other required accessories complete fixing at site all as specified and directed. |
| 78 | Demucking/Cleaning of old surface channels/drains of depth up to 1m of any section or width including culvert portion below road and removing/refixing drain cover of any shape and size and removal of sludge / silt /mud in foul position and disposing the sameout side MD premises complete all as specified and directed.(Note : cost of dumucking includes for foul smell also) |
| 79 | M & L for complete removal mud,/Cement/dust etc from old Chequered tile / cement concrete surface and apply two coate ofacrylic emulsion floor Paint of any colour as approved by engr in charge. |
| 80 | S&F in repair steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staples and one shop coat of primer, erected in position incl welding as indicated complete push, pull or manual type thickness of flap 1.25mm including taking down ofof rolling shutter complete all as specified and as directed . |
| 81 | M& L for endura chequerd tiles 30 cm x 30 cm with 20 to 25 mm thickness of approved colour and design pattern (Square/ rectangular) as in paths, floors etc set and jointed inneat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bedinCM 1:6 complete all as specified and directed. |
| 82 | Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat.Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guiniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary potland cement 43 grade and 2 part of Ghagger sand mixed with adhesive /admixture at the rate as per manufacturer instruction and as directed) including stripping floting with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guiniting to be finished fair with 10mm thick plaster in cement 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc as directed at site. ( Welded mesh & addl reinforcement if required measured and paid separetly)Note :-Note: Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosingaffected area by green cloth) up to G+3 storey building. |
| 83 | M & L hard drawn steel wire fabric cut to length, bent to shape required of mild steel wire mesh / welded meshand tying with and including annealed mild steel wire not less than 0.9mm dia binding wire S & F in reinforcement weight not exceeding 4.00 Kg/Sqm complete all as specified and directed |
| 84 | Dismantling of Brick tiles or terracing tiles existing roof treatment of any type , like plastic felt/HP tiles including existing plastering /concrete in covering of any thicknessincluding removal of debris to be disposed out side of MOD premises complete all as specified and directed. |
| 85 | Demolition of mud in roofs any thickness complete all as specified and directed |
| 86 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed. |
| 87 | M & Lbrushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as specified and directed. |
| 88 | M & Lfor PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in roof padding, roof kerb or mud stop, rounded or chamfered on edge complete all as specified and as directed. |
| 89 | M&L 15 mm thick Screed bed or bedding layer of CM 1:4 mixed with integral water proofing compound as per manufacturere\"s instructions . (water proofing compound shall be measured and paid seperately) complete all as specified and as directed. |
| 90 | Supply only water proofing compound liquid @ 200 ml / per bag of cement complete all as specified and directed. |
| 91 | M&L for treatment of roof with reinforced elastomeric liquid waterproofing membrane of 400-micron thickness in four layer(100micron each layer) having SRI of 130, tested as per ASTM E 1980 (with Solar Reflectance and Thermal emittance tested as per ASTM C 1549 and ASTM C 1371 , respectively). The coating should have water absorption less than 1% as per IS: 101 (P-7/Sec-1) 1989, with the ability to resist heat upto 120 00 as per IS: 101 (P-7/Sec-3) 1990 having VOC less than f g/ltr as per ASTM D 3960 and should have excellent resistance to transmission of ponded water up to 2.5 bars of pressure for 7days. It should also be resistant to Ammonia solution, Sodium nitrate, Sodium hydroxide, along WIth water and soap solution as per IS: 101 (P-7/Sec-2)1990. The waterproofing membrane will be laminated with 25 - 40-micron thick transparent Nano modified composite crosslinking polymeric coating with a minimum of 40% solid content as per IS: 101 (P -8/Sec6)1993 and also should pass Impact test as per IS: 101 (P-5/Sec-3) 1988 along with having dust and water repellent & anti-graffiti property passing Scratch hardness test of 500g as per IS: 101 (P-5/Sec-2) 1988. It should also pass Cross Cut Adhesion test as per IS: 101 (P-5/Sec-2) 1988. The Polymeric coating should have a self-cleaning and easy-to-clean property with excellent weather stability and DPR (Dirt pickup ratio). Surface preparation includes cleaning the surface with wire brush and washing cleaning to remove all dust, fungus, etc.The work will be done under the supervision of the Engineer-in-charge.The coating thickness and the methodology of application shall strictly be carried out by the authorised vender/ manufacturers with all specifications and as approved by the Engineer-incharge. The manufacturer shall give a warranty for the peformance& durability for 7years. |
| 92 | Removing building demolished materials / old waste unwanted existing material of any description or any type etc on alternate day to a distance 5 km or beyondout side MOD land complete all as specified and as directed. |
| 93 | Demolition of Cement Concrete (unreinforced) of any description and in any position complete all as specified and directed. |
| 94 | M&L for Brick work with sub-class `B\" bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed. |
| 95 | M&L for cement concrete typeE-2, 1:5:10 (40mm graded aggregate) in mass concrete and filling in sunken portion complete all as specified. |
| 96 | M&L for sunken treatment as following over it complete all as specified and as directed:-(a) Rendering 10 mm thiick in CM 1:4,(b) Two coats of tapecrete mixed (1:2) with cement slurry @ 3Kg/sqm per sqm or as per manufactures\"s instruction, surface finished even and smooth(c) Applying a coat ofbitumen primer @ 0.70 kg /sqm, applying one coat of hot bitumen 85/25 gde @ 2.6 kg/sqm (d) Applying one layer of 0.5 mm thick fibre tissue/APP membrane |
| 97 | S & F in repair Vitreous China wash down water closet pan (S-Trap/ P-Trap) 1st quality (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including sheet cover complete all as specified. |
| 98 | S & F in repair Vitreous China wash down water closet pan(S-Trap/ P-Trap) 1st quality Semi pedestal pattern (Anglo-Indian Type), white (excluding fixing bolts, flushing cistern and flush pipe) including sheet cover complete all as specified. |
| 99 | S and F in repairs PVC valveless, syphonic action type, flushing cistern of 10 lit capacity low level, white, with inlet,ball valve, float and handle including brackets with 32 mm CPFlush pipe of Low level cistern complete all as specified. |
| 100 | S&F in repairs china water closet Orissa Pan 580 X440mm long pan Ist quality ISI marked with intergral foot rests, cast iron\"S\" trap including provn of cement concrete bedding including connections and fixing flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed. |
| 101 | M&L for Supply and fixing 18 mm thick 100 % Solid premium quality Action Tesa HDHMR base board pre laminated both side (of approved colour) having density more than 850 kg/cum, fixed with screws as in wall panel, storage cabinet/Vanities/ Cub board and built in modular tables etc, for hold of shelf / partation and shall provide 3 edges in sizes 18 mm x 18 mm as per required length.theedgesof shelf / partation / wall side to be lipped with including 18 mm x 1 mm thick laminated sheet of density 850 kg/cum manufactured by as ISO -9000 certified company , lipping portion should be match with laminated colour, using solvent cement etc. (including all necessary brass hardware fitting i.e Soft closing hydraulic hinges,handle, ball catchers including mortice locking arrangement, hole cap including lipping etc, and Channel siliding rail in each Cup board/ Vanities incl dismantling of existing, complete all as specified and directed. |
| 102 | Dismantling water tanks exc 500 ltr and n.exc 1000 ltr and removal from site to store complete all as specified and directed. |
| 103 | S & F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 Ltrs Including making connection for inlet & outlet with connection piece complete all as specified and directed. |
| 104 | Dismantling water tanks exc 250 & n exc 500ltr capacity and removing to store complete all as specified and directed. |
| 105 | S&F 500 ltr Rotational moulded Polyethylene water storag tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I Including making connection for inlet & outlet with connection piece complete all as specified and directed. |
| 106 | S & F ball brass valves high pressure with polythene float & flynut complete screwed for Iron pipe or brass ferrule of 20 mm dia and fixed complete all as specified and directed. |
| 107 | S&F in repair 20 mm boregun matel globe or gate valves with iron wheel, screwed both ends for iron pipes fixedcomplete in all respect as specified and directed. |
| 108 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 109 | S & F 110 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 110 | S & F 75 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 111 | S & F 110 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 112 | S & F 75 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 113 | S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement |
| 114 | S&F MS Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to FE-290 Gde-E-165 |
| 115 | M&L in repair PVC/uPVC fittings such as Tee, bend,branch piece,floor trap etc upto 110mm bore (waste water/rain water/soil pipe) where ever required to stop leakage including testing of leakage upto (G+3) building complete all as specified and directed. |
| 116 | M&L in repair CI fittings such as Tee,bend,branch piece,floor trap etc upto 100mm bore (waste water/rain water/soil pipe) where ever required to stop leakage including testing of leakage upto (G+3) building complete all as specified and directed. |
| 117 | Dismantling 100mm/75mm dia bore cast iron soil, waste and vent pipes including fitings by burning out lead joints etc complete all as specified and directed. |
| 118 | S&F Cast iron soil waste and vent pipes in any length with or with out ears with cement joints but fixed to wall for 100 mm bore complete all as specified and directed. |
| 119 | S&F Cast iron soil waste and vent pipes in any length with or with out ears with cement joints but laid in trenches or in floorsfor 100 mm bore complete all as specified and directed. |
| 120 | S&F Cast iron soil waste and vent pipes in any length with or with out ears with cement joints fixed to walls for 75mm bore complete all as specified and directed. |
| 121 | S&F Cast iron soil waste and vent pipes in any length with or with out ears with cement joints, laid in trenches or in floorsfor 75mm bore complete all as specified and directed. |
| 122 | M & L for 1.5 to 2 cm thick outdoor garden tiles of any size, colour and pattern with high abrasion, UV, stain resistance and suitable for gardens, pathway etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr in charge. (approved by EIC) |
| 123 | M & L uprooting of plants (girth n.exc 15 cm of trunk to any height of plants) grown along the pipes or walls,chajjas,parapets bldgs and making good the surfaces as per existing surfaces and pouring acid not less than 100 ml for each plant in the root to avoid further growth as directed.Any other grass plants etc below 45 cm height shall be deemed to be removed from the premises complete all as specified and directed. Note :- The work described in these items shall be executed in bldgs up to (G+3 floor) hence the contractor shall make scaffolding arrangements, trestles, ladders etc and hessian clothes where required, for protection & all other safety precautions up to 04 storeys of buildings and the cost for the same is deemed to be included in the quoted unit rates.Note :- Removing building materials /old waste unwanted existing material of any description or any type etc.on alternate day to a distance of 5km or beyond out side MOD Land and the cost for the same is deemed to be included in the quoted unit rates. |
