|
| 1 | M & L for fixing/ refixing only rain water pipes of any description and dia in roofs/ spouts/ wall etc with necessary pasteing material/ rubber rings/ sockets/ elbows etc including providing GI clamps to bear the load of pipes complete all as specified and directed by Engr-in-charge.Note :- (i) The contractor shall execute work upto the height of 35 mtr from ground level with necessary scaffolding and safety arrangements .(ii) Pipes shall be measured and paid seperately. |
| 2 | M&L for cleaning & desilting of manholes of any shape containing upto 0.50 cum sludge each, by pumping out/ removing liquid waste/ sewage & plugging the ends of sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinkling bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements, face mask etc and removing the silt, sludge & other waste material in leak proof trucks covered with tarpaulin outside MD land allas per existing rules and regulations of civil authorities and cleaning the manholes with fresh water complete all as specified and directed by Engr-in-Charge.Note: The place of disposal shall be find out by the contractor. |
| 3 | -Ditto- all as per item No.2.00 above but sludge exceeding 0.50 cum but not exceeding 1.00cum each |
| 4 | -Ditto- all as per item No.2.00 above but sludgeexceeding 1.00 cum but not exceeding 1.50cum |
| 5 | M&L for cleaning and desilting of sewage lines systematicaly of any size, shape and depthincluding sludge chambers, gully traps of size and shape upto any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc,sprinkling bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements, face mask etc and removing the silt,sludge & other waste material inleak proof trucks covered with tarpouline outside MD land allas per existing rules and regulations of civil authorities and flushing the sewer lines with fresh water complete all as specified and directed by Engr-in-Charge.Note: i) Length of sewage lines including chambers, traps etc will be measured for payment. However cleaning of manholes shall be measured and paid separately under appropriate item.ii) The place of disposal shall be find out by the contractor. |
| 6 | Systematically cleaning of RCC hume pipe of any bore by passing ropes, knots, bamboo incuding taking all safety measures and removing the silt,sludge & other waste material inleak proof trucks covered with tarpouline outside MD land allas per existing rules and regulations of civil authorities and flushing the sewer lines with fresh water complete all as specified and directed by Engr-in-Charge.Note: The place of disposal shall be find out by the contractor. |
| 7 | Material & Labour for removing RCC cover slab of any description from drain / culvert and cleaning the drain / culvertremoving soils, spoils, vegetation, silt etc and refixing the cover slab in existing position and making good disturbed surfaces and removing waste material outside MD Land complete all as directed by Engineerin-Charge.Note: The place of disposal shall be find out by the contractor. |
| 8 | M&L for cleaning and desilting of sewage lines upto 150mm bore including sludge chambers, gully traps of size and shape upto any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc,sprinkling bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements, face mask etc and removing the silt,sludge & other waste material inleak proof trucks covered with tarpouline outside MD land allas per existing rules and regulations of civil authorities and flushing the sewer lines with fresh water complete all as specified and directed by Engr-in-Charge.Note: i) Length of sewage lines including chambers, traps etc will be measured for payment. However cleaning of manholes shall be measured and paid separately under appropriate item.ii) The place of disposal shall be find out by the contractor. |
| 9 | -Ditto- all as per item No.8.00 above but200 mm to 250 mm of bore sewage line. |
| 10 | -Ditto- all as per item No.8.00 above but 300 mm bore sewage line |
| 11 | M & L for cleaning / Clearing blockages in CI/ AC soil, waste pipes not exc 150 mm bore by removing cleaning eye and refixing the same after cleaning the pipes including making good damaged cement joint inCM (1:2) and removing waste material outside MD Land complete all as directed by Engineerin-Charge.Note: The place of disposal shall be find out by the contractor. |
| 12 | M & L for Cutting holes through cement concrete and taking out CI pipes of any dia,cleaning / removing blockages and re- fixing including making good with CM1:3to match with existing surface, superficial area exc 250 sq.cm and n.exc 500 sq. cm complete all as directed. |
| 13 | M & L for Cleaning /Clearing of blockages in PVC soil, waste,/rain water pipe of any diaeither manually or mechanically in any position and height upto maximum 25 mtr height including scaffolding and safety arrangement complete all as directed. |
| 14 | M & L for Cleaning /Clearing of blockages in concealed CI/AC soil, wastet,/rain water pipe of any diaeither manually or mechanically and washing with bleaching powder in any position and height upto maximum 25 mtr height including scaffolding and safety arrangement complete all as directedNote: Any breaking of floor/wall required for clearing the blockage shall be measured and paid separately. |
| 15 | M & L for cleaning of plumbing shaft, floor area not exceeding 5 sq. mtr each, removing all cotton waste/liquid waste from the shaft and applying bleaching powder from ground floor to 7th floor /roof level all as directed |
| 16 | Removal of tree/plant/shrubs of any size from walls, ceiling, roofs and joints of pipes etc of the bldg from ground floor to 7th floor /roof levelincluding uprooting roots from walls and applying chemical of approved make to arrest the growth andmaking good damaged surfaces in PCC 1:2:4 type B1 or cement mortar (1:3) including necessary scaffolding and other safety arrangements complete all as specified and as directed |
| 17 | M & L for attending complaints for cleaning and clearing of blockage from nahani trap, Gully trap, WHB , Urinal,IPWC, EPWC etc with necessary tools/ cleaning rods/ machine as required to attend day to day complaints allas directed.Note : (i) Attending 4 (four) complaints shall be measured as one unit. (ii) The complaints shall be attended within 24 hours.(iii) The representative of contractor shall receive complaint from office of AGE (I) Asvini at 0900hrs daily and register shall be maintained for the same by Engr-in-charge. |
| 18 | Demolition and breaking up sewage pipes (SWG) set in cement mortar, internal dia of pipe 150 mm including removing rubbish outside MD land Note: The place of disposal shall be find out by the contractor. |
| 19 | -Ditto- all as per Item No 18.00 above but RCC pipe 300 mm dia |
| 20 | M & L for concrete bed to sewage pipes including packing under and completely surrounding pipes with concrete after they are laid and tested in cement concrete 1:3:6 type C-2 ,dia of pipe 150 mm |
| 21 | -Ditto- all as item No 20.00 above but 300 mm dia |
| 22 | M&L for salt glazed stoneware drain pipe, grade \"A\", laid in trenches and jointed as specified, internal diameter of pipe 150 mm complete all as specified & directed. |
| 23 | Material & Labour for reinforced concrete pipes, class NP-2 laid and jointed complete with collars, internal diameter of pipe 300 mm complete all as specified & directed. |
| 24 | Excavating in trenches n exc 1.5m wide & n exc 1.5m in depth; for foundation, etc. or for manholes n.exc.10 Sqm on plan and n.exc.1.5m in depth and getting out in hard/ dense soil complete all as specified. |
| 25 | Returning filling in , including spreading, leveling, watering and well ramming in layers not exc 25 cm. |
| 26 | Removing excavated materials (soils) outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor. |
| 27 | Cutting into existing manholes for connecting new drains, making good to pipe & rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete 1:2 :4 type B-1 smooth finished, & reforming benching as required, internaldia of pipe 150mm. |
| 28 | S & F in repairs cast iron work grade FG 150, articles exc 5 kg each unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles |
| 29 | M&L for preparation of new or previously untreated steel surfaces of any description and applying two coats of Black Japan paint all as specified and directed |
| 30 | M&L for providing plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggrtegate) as in lintels upto 1.5mtr clear span, cills,steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, bed blocks, roof kerbs water troughs and the like including weathering slightly rounded or chamfered angles and throatingand necessary formwork complete all as specified and as directed |
| 31 | Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specifiedNote: The place of disposal shall be find out by the contractor. |
| 32 | M&L for brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified. |
| 33 | Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land.Note: The place of disposal shall be find out by the contractor. |
| 34 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) and finished even & smooth without using extra cement complete all as specified. |
| 35 | Dismantling stone slabs, pavers and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of rubbish out side MD land.Note: The place of disposal shall be find out by the contractor. |
| 36 | M&L for machine pressed precast concrete inter locking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified . |
| 37 | M&L for providing , cement concrete type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs or mud stops, or in corners of tiles etc, rounded or chamfered on edges complete all as specified and directed. |
| 38 | Supply & Fixing 110mm bore PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with dash through fastners and rain water bracketsuitable for 110mm bore pipe spacing 1.5m c/c as per CE (Navy) Mumbai TD No TD/2023/01 or laid in floor complete all as specified. |
| 39 | -Ditto- all as per item No.38.00 above but 75mm bore. |
| 40 | -Ditto- all as per item No.38.00 above but 160mm bore. |
| 41 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing debris out side MD land. Note: The place of disposal shall be find out by the contractor. |
| 42 | M&L for glass dividing strips, 3mm thick and 38mm wide laid in floors, plinth courses etc complete all as specified and directed by Engr-in-charge. |
| 43 | Supply and application of Sealant Ottoseal S 70 Premium silicone at the junction of the windows, sky lit roof, wall-floor tile joint, expansion joint, crumple joint etc.complete all as per manufacturers instructions. |
| 44 | M&L for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes in structural members at the intervals of 75 cm center to center at 45 degree in staggered manner or as directed by Engr-incharge in RCC structural element. Work shall be carried out as under :-(i) Cleaning of holes. Clean the holes by air blower prior to fixing nozzles.(ii) Fixing of nozzles. Insert 12mm dia. Rohibb Teflon nozzles in cleaned holes.External end of nozzles to be machine to receive outlet of grouting gun.Fix it inside theholes by applying thixotropic epoxy putty to ensure complete sealing. Cure the systemfor min.12 hrs.(iii) Cutting of nozzles. Cut the nozzles by chisel after completion of grouting withoutdamaging structural elements. |
| 45 | M&L for Injecting of site cement slurry grout, in the ratio 1:2 (1- Cement, 2-water) including super plsticizer (Supercom-100) 250 ml/50 Kgs. Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 0.5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled. (for repair to slab) |
| 46 | S&F plain Aluminium sheeting 0.71mm thick Alloy 31000 H4 in as in crumple jointsincluding necessary fixing arrangements such as screws, clamps at a height upto 30 mtrs and scaffolding with all safety arrangements including taking down the old one complete all as specified and directed. |
| 47 | M&L for cement plaster 10 mm thick in two coats (5mm in each coat) as in ceiling at height upto 10mtrin CM 1:3 finished even and smooth, using factory manufactured pre mix/ ready mix plaster including cleaning the surfaces, sufficeient curing etc. and necessary scaffolding and safety arrangements complete all as per specifications and directed. |
| 48 | M&L for cleaning existing reinforcement with wire/rotary wire brush, making the surfaces free from loose material, dirt,loose rust spalls and applying two coats of rust remover (measurement shall be on the basis of exposed concrete/ plaster area ). |
| 49 | M&L applying two coats of anti-rust protective coating in the form of Acrylic Polymer mixed with Cement in 1:1.5 proportion (1 part polymer and 1.5 parts Cement)(measurement on the basis of exposed concrete/ plaster area). |
| 50 | Demolition of lime concrete (in sunken portion) of any description and in any position not otherwise specifically provided for and removing debris out side MD land. Note: The place of disposal shall be find out by the contractor. |
| 51 | Dismantling floor, hearth or wall tiling including cement mortar bedding and backing coat of any thickness and rubbish off the premises. Note: The place of disposal shall be find out by the contractor. |
| 52 | M&L for rendering 15 mm thick on sunken portion concrete surfaces of any description in CM (1:3) mixed with integral water proofing compound and finished even & smooth without using extra cement complete all as specified.Note : WPC will be measured and paid separately. |
| 53 | M & L for applying two coats of hot bitumen of any grade @ 1.50 Kg/Sqm over vertical surfaces and floor of sunken slab after laying all CI connections, branch pieces etc and covering joints including laying of polythene film black 50 micron complete all as specified |
| 54 | M & L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate), 40 mm thick in flooring, surface finished even and smooth without using extra cement complete all as specified and directed. |
| 55 | M & Lfor 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) and finished surfaces fair and even complete all as specified and directed. |
| 56 | M&L for lime concrete using 40mm brick bats/aggregate in lime mortar 1:3 as in filling of sunken portion of slab after carrying out required tests for water tightness ofCI pipe joints/water proofing treatment complete all as specified and directed. |
| 57 | S & F spouts made out of CPVC pipe 40 mm bore, including cutting holes in brickwork/ PCC/ and making joint leakproofcomplete all as specified . |
| 58 | Material & Labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles exc 0.06 Sqm but n exc 0.09 Sqm laid in floor over and including15mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified. |
| 59 | Material & Labour for coloured glazed ceramic tiles 450mm x 300mm x 7mm thick but laid on vertical surfaces such as skirting(100mm hight) /dado etc., laid over and including 10mm thick backing coat in CM (1:4), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified. |
| 60 | S&F 75 mm bore PVC(SWR) bend any radius, with rubber ring joints. |
| 61 | Supply & Fixing in repair cast iron nahani trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1, diameter of outlet75mm bore complete all as specified and directed by Engr-in-Charge . |
| 62 | Supply & Fixing in repair cast iron nahani trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1, diameter of outlet100mm bore complete all as specified and directed by Engr-in-Charge . |
| 63 | S&F in repairsvitreous china wash down water closet pan (Pedestal pattern) white, with \"P\" or \"S\" trap and matching plastic sheet cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium anodized hinging device and making all connections complete all as specified. |
| 64 | S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe including 1.2mtr hose pipe with complete connection, ISI marked complete all as specified and directed |
| 65 | S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern of size 580 x 440 mm white, with integral foot rest (excluding flushing Cistern, flush pipe etc) including 110mm PVC \"S\" trap and provision of lime concrete bedding and making all connectionscomplete all as specified. |
| 66 | S&F in repairs low level PVC flushing cistern (coloured) of heavy duty, 10 Ltrs capacity, syphonic action type complete with inlet, ball valve, float and handle including cast iron bracket and 32 mm bore PVC flush pipe and connecting to WC complete all as specified. |
| 67 | S&F in repairs wash hand basin vitreous china flat black type of size 630 mm x 450 mm white, including CI brackets and 32 mm dia PVC waste coupling including cutting for and pining in ends of bracket and connecting up supply pipes, waste or taps complete all as specified |
| 68 | S&F in repairs vitreous china urinal half stall type white including connection to flushing pipe and out going pipe complete all as specified and directed. |
| 69 | S&F in repairs sinks stainless steel 304 grade 1 mm thick kitchen or laboratory with plugs washers and wastes: incluidng bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union ot pipe upto 0.50 sqm each overall size 915mm x 460mm bowl size 410mm x 330mm x 160mmcomplete all as directed |
| 70 | S&F in repairs 15mm bore Brass CP mixer for mixing Hot & Cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 71 | S&F in repairs 304 grade braided stainless steel connection pipe hose pipe for wash basin, kitchen sink, geyser upto 60 cm length and suitable to fit 15mm dia pipe complete all as specified and directed by Engr-in-charge. |
| 72 | S&F in repairs vitreous china urinal partition white of size 310mm x 700mm terminating about 40cm above floor line ,fixed complete all as specified and directed by Engr-in-charge. |
| 73 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm. |
| 74 | S&F in repairs 40mm bore waste coupling of PTMT (half or full threaded) Minimum weight 60 gms with 40mm dia waste pipe of 1Rm complete all as directed |
| 75 | S&F 15 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings or laid in floors with suitable size GI clamps including taking down old GI tubing including fittings complete all as specified. |
| 76 | Ditto- as per item No 75.00 above but 20mm bore. |
| 77 | Ditto- as per item No 75.00 above but 25mm bore. |
| 78 | S&F in repairs20 mm bore gun metal globe or gate valve, with iron wheel, head, screwed both ends for GI pipe complete all as specified. |
| 79 | Ditto- as per item No 78.00 above but 25mm bore. |
| 80 | Supplying and fixing 40mm bore CPVC pipes SDR 11 including Plain CPVC SDR 11 fittings as required laid in floors or fixed to walls and ceilings with suitable size GI clampsincluding taking down old CPVC pipe and fittings complete all as specified. |
| 81 | Ditto- as per item No 80.00 above but 20mm bore. |
| 82 | S&F in repairs 15mm bore bib tap fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrrule or fixed complete all as directed. |
| 83 | S&F repairs angle cock/valve 15mm bore of cast copper alloy fancy type, one way/two/three way screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions ad fixed complete all as specified and directed by Engr-in-charge. |
| 84 | S&F 15 mm bore pillar taps cast copper alloy,chromium plated fancy type with capstan heads screwed down high pressure with or without lettered `Hot\" or `Cold\" with long screwed shanks and fly nuts screwed for iron pipe or brass ferrule complete all as specified. |
| 85 | S&F in repairs 125 mm dia shower rose, brass chromium plated with swivel joints andfixing to 15 mm bore steel water tubing complete all as specified. |
| 86 | S&F in repairs 6mm thick superior quality beveled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers size 600mm x 450 mm. |
| 87 | S&F in repairs Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges |
| 88 | S&F in repairs soap dish brass CPfixed towall withCP brass screws complete all as directed. |
| 89 | Taking down chowkat with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each |
| 90 | Supply & Fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specification and drawings shown in SSR Part II.complete all as specified and as directed by Engr-in-Charge. |
| 91 | M&L for factory made solid PVC moulded door shutter 28 to 30 mm thick with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face with particle board core complete all as specified in SSR Part-II. |
| 92 | S&F aluminium anodised barrel tower bolts of extruded section, 125 mm length, ISI marked. |
| 93 | S&F Butt hinges 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 |
| 94 | S&F extruded aluminium alloy handles, fabricated type, anodised 100 mm size, ISI marked. |
| 95 | Supply only integral water proofing compound |
| 96 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces of walls of bldg internallyin CM (1:6) mixed with integral water proofing compound @ 3% by weight of cement and finished even & smooth without using extra cement complete all as specified and directed by Engr-in-charge. |
| 97 | Supply and applying Asian paints Smart care Hydro Loc Pre-putty water proofing coat on plastered surface as per as per manufacturers instructions with covering area 4 sqm /ltr complete all as specified and directed by Engr-in-Charge. |
| 98 | M&L for machine cut, machine polishedgranite stone slab 20mm thick in flooring set, bedded and jointed with white cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:4) complete all as specified . |
| 99 | M&L for machine cut, mirror polished granite slab 20 mm thick as in steps, jambs, pillars, window cills, cooking platform in one piece of any size of approved colour laid over and including screed bed 15 mm thick in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including necessary grinding and rounding moulding to corner of slab all as directed by Engineer-in-Charge. |
| 100 | M&L for machine cut, machine polishedgranite stone slab 20mm thickin skirting/dado set, bedded and jointed with white cement paste and pointed with white cement mixed with admixture of pigment to match the shade of granite stone laid over and including backing coat 15 mm thickin cement mortar (1:3) complete all as specified. |
| 101 | Material & Labour for 20-25mm thick, machine cut, Kotastone slab, as in floors, steps, landing etc. laid over and including 20mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including rubbing, cutting and polishing as specified in SSR Part I complete all as specified. |
| 102 | M &L for machine cut kota stone slab 18 to 20 mm thick as in vertical surfaces such as skirting/dado laid over and including 15mm thick backing coat in CM (1:4), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile including rubbing, cutting and polishing as specified in SSR Part Icomplete all as specified. |
| 103 | M & L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate), 25 mm thick in flooring, surface finished even and smooth without using extra cement complete all as specified and directed. |
| 104 | Material & Labour for vitrified ceramic tiles 10 mm thick (square /rectangular ) polished dark shade, area of each tiles not exceeding 0.36 sqm, in floor laid in floor over and including20mm thick screed bed or bedding layer in cement mortar ( (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified. |
| 105 | M&L for 12-15mm thick and 100 to 150mm wide and 1000-1500mm in lengthinterlocking laminated wooden flooring (Make and colour approved by Engr-in-charge) laid on 5mm thick PVC foam paste to floor with adhesive as per manufacturer instruction including proper levelling of floor be done before laying including filling holes/cracks/patches with cement plaster (1:4) complete all as specified and directed by Engr-in-charge. |
| 106 | S&F in repairs sinks stainless steel 304 grade 1 mm thick kitchen or laboratory with plugs washers and wastes: incluidng bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union ot pipe upto 0.50 sqm eachoverall size 495mm x 420mm bowl size 410mm x 330mm x 160mmcomplete all as directed |
| 107 | S&F grating doom 100mm dia of PTMT (minimum weight 25 gms) complete all as directed |
| 108 | S & F in repairs 15 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high dencity plastic ball screwed for iron pipe, minimumweight 42gms each complete all as specified.. |
| 109 | S & Fin repairs PVC Mirror cabinet of size not less than 600 X 450mm of approved make and fixed to wall with CP brass screws complete all as specified |
| 110 | S & Fin repairs PVC water storage lofttank of capacity 250 litres hoisted and fixed in position including all connections for inlet, outlet, over flow and wash out etc complete all as specified. |
| 111 | Dismantling cast iron work of any description and in any position. |
| 112 | Supply & Fixing 100 mm bore Cast iron soil, waste and vent pipes ( spun pipes) , in any lengthwith or without ears, with cement joints, fixed to walls with suitable size GI clamps complete all as specified and as directed by Engr-in-Charge |
| 113 | -Ditto- all as per item No112.00above but 75mm bore |
| 114 | S&F 100 mm bore cast iron bend (any radius) with oval access doors fixed to CI pipe and jointing with cement mortar complete all as specified. |
| 115 | -Ditto- all as per item No114.00above but 75mm bore |
| 116 | S&F 100mm bore CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches and jointing with cement mortar complete all as specified. |
| 117 | -ditto- as per item No 116 above, but 75mm dia |
| 118 | S&F 110 mm bore PVC(SWR) bend any radius with access door, with rubber ring joints. |
| 119 | Material & Labour for mild steel plates 6mm thick ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk ) forming holes, without any attachment including all necessory drilling, bolting,riveting or welding conforming to Fe 410 -W (Gde E- 250) quality-A for keeping loft tank including dismantling existing plate complete all as specified. |
| 120 | S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for support to iron plates of loft tanks conforming to Fe 410-W (Gde E-250 quality A)including dismantling existing plate complete all as specified.Note :- The rates include for dismantling rolled sections and fixed propery in wall with cutting to brickwork and fixed with cement mortar (1:3) complete all as specfied. |
| 121 | M&L for preparation of new plastered surface of wall, applying a coat of wall careputty not less than 2mm thick and makingthe surface even and smooth using emery paper and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of primer complete all as per manufacturer\"s specification. |
| 122 | M&L for filling cast iron fittingjoints with cement mortar 1:3 of any size and in any position including removing old joints including necessary scaffolding and safety measures complete all as specified and directed by Engr-in-charge.Note :-The work will be carried out upto the height of 35 mtr from ground level |
| 123 | M&L for brickwork with subclass \"B\" bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed by Engr-in-charge. |
| 124 | M&L for cutting and polishing with machine existing floor tiles (Kota stone, marble ,granite stone etc) to obtain mirror finish including filling/pointing the joints of tiles with white cement mixed with pigment to match the colour of tiles complete all as specified in clause No 13.47.4 of SSR part I . |
| 125 | M & L for Somany \"stepnon crema/maroon/nero\" 9.5mm thick self embossed grooves with anti skid property and bull nose finish heavy duty full body vitrified tiles of size 300 x 1200mm for stairs laid over and including 15mm thick backing coat in cement mortar (1:3) complete all as specified and directed by Engr-in-charge. |
| 126 | M & L for Somany \"Riser crema/maroon/nero\" 9.5mm thick with anti skid property and bull nose finish heavy duty full body vitrified tiles of size 200 x 1200mm for stairslaid over and including 15mm thick backing coat in cement mortar (1:3) complete all as specified and directed by Engr-in-charge. |
| 127 | M & L for Somany \"Grantstone crema/maroon/nero\" 9.5mm thick with anti skid property and bull nose finish heavy duty full body vitrified tiles of size 600 x 1200mm for stairs laid over and including 15mm thick backing coat in cement mortar (1:3) complete all as specified and directed by Engr-in-charge. |
| 128 | M & L for 15mm thick Dholpur stone with hammer dressed facework (with maximum depression from a straight edge held against the dressed surface not exc 20mm), fixed on vertical surface area not exceeding 0.09 sqm each laid over and including 15mm thick backing coat in cement mortar (1:3) andjointed in cement and stonedust mortar 1:3, recess pointed (10mm x 20mm) with an admixture of white cement and Dholpur stone dust 1:1 complete all as specified and directed by Engr-in-charge. |
