|
| 1 | Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade (heavy duty )armoured UG electric cable with aluminium conductor of size 3.5 x 120 sq.mm. direct in ground including excavation andrefilling the trench but excluding sand cushioning & protective covering. |
| 2 | Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade (heavy duty )armoured UG electric cable with aluminium conductor of size 3.5 x 50 sq.mm. direct in ground including excavation andrefilling the trench but excluding sand cushioning & protective covering. |
| 3 | Supplying and Laying of one no PVC insulated/PVC sheathed XLPE power cable ,1.1 KV grade (heavy duty), armoured UG electric cable with aluminium conductor ofsize 3.5 x 120 sqmmin the existing masonry/open duct/in exisiting Conduit as required. |
| 4 | Supplying and Laying of one no PVC insulated/PVC sheathed XLPE power cable ,1.1 KV grade (heavy duty), armoured UG electric cable with aluminium conductor ofsize 3.5 x 50 sqmmin the existing masonry/open duct/in exisiting Conduit as required. |
| 5 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc80 mm |
| 6 | Supplying and fixing of light class G.I. pipe of 50 mm dia.(nominal) 3 metres length along the pole for protection ofunder ground cable as required |
| 7 | Supplying and fixing of light class G.I. pipe of 80 mm dia.(nominal) 3 metres length along the pole for protection ofunder ground cable as required. |
| 8 | Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3½ X 35 sq. mm |
| 9 | SITC of outdoor type joint box, Single door made out of 16 SWG CRCA sheet duly painted with powder coated of size 450 mm x 450 mm x 300 mm deep having 160 amps, 04 nos insulated aluminium bus bars and suitable size insulator, front door openable & angle iron base frame of size 450 mm x 300 mm with 600 mm long legs made out of 45 mm x 45 mm x 5 mm thick angle &grouting the same in suitable cement concrete foundation, arrangement for incoming / outgoing cabling / cable termination, earthing, locking, interconnection etc. as required. As per direction of Engineer-In-Charge |
| 10 | SITC of water protected outdoor type compartmentalized hut type double door cubical panel of 900 mm x 650mm x400mm depth suitable for 415 Volt, 3 phases, 50 Hz made out of 2 mm thick CRCA sheet with required hardware duly painted with powder coated. The panel having 160A/415V 4 strip aluminum bus bar duly PVC sleeved, separate detachable gland plate,angle iron base frame made out of 45mmx45mmx5mm angle iron of suitable size of the panel (minimum height 60cm)/suitable size iron base frame/Channel frame for placing on surface/cable trench as per site required, hinged door, withlocking arrangement for inside/outside separately, earth bar/stud, i/c grouting the legs in 1:3:6 cement concrete foundation complete as required with following instruments mounted on it. (Panel should beas per design &drawing approved by Engg in charge) Instruments(Inside/outside)i ) 100 Amp FP SDF unit with DIN type fuse complete as required make-L&T or equivalent specification HPL/Schneider/L&T make - 01 Nos ii) 63 Amp FP SDF unit with DIN type fuse complete as required make-L&T or equivalent specification HPL/Schneider/L&T make - 01 Nosiii) 32 Amp FP SDF unit with DIN type fuse complete as required make-L&T or equivalent specification HPL/Schneider/L&T make - 01 Nosiv) 63 Amp DPMCB - DHMGCDPF063(Havells) equivalent specification HPL/Schenider/L&T make- 02 Nosv) 32 Amp DPMCB - DHMGCDPF032(Havells) equivalent specification HPL/Schenider/L&T make- 02 Nosvi) 3 Phase DIgital Ammeter, 96x96 flush mounting Make-L&T - 01 Novii) 3 Phase DIgital Voltmeter, 96 x 96 flush mounting Make-L&T - 01 Nov) LED Pilot light (22.5 MM dia) -03 Nos |
| 11 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm diaincluding accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required |
| 12 | Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required |
| 13 | Add Labour Cess @1% on MR Items |
