Providing And Laying App (Atactic Polypropylene Polymer) Modified Prefabricated Five Layer 3Mm Thick Water Proofing Membrane, Black Finished Reinforced With Non-Woven Polyester Matt Consisting Of A Coat Of Bitumen Primer For Bitumen Membran @ 0.40 Itr/Sq.Mt. By The Same Membrane Manufacture Of Density At 25°C, 0.87-0.89 Kg/Ltr And Viscosity 70-160 Cps. Over The Primer Coat The Layer Of Membrane Shall Be Laid Using Butane Torch And Sealing All Joints Etc., And Preparing The Surface Complete. The Vital Physical And Chemical Parameters Of The Membrane Shall Be As Under Joint Strength In Longitudinal And Transverse Direction At 23°C As 650/450N/5Cm. Tear Strength In Longitudinal And Transverse Direction As 300/250N. Softening Point Of Membrane Not Less Than 150°C. Cold Flexibility Shall Be Upto -2°C When Tested In Accordance With Astm, D-5147. The Laying Of Membrane Shall Be Got Done Through The Authorized Applicator Of The Manufacturer Of Membrane. 3 Mm Thick , Providing & Laying Broken Glazed Titles On Roof ( Broken Glazed Tiles Not Less Than 9 Kg/Sqm) On Top Of Hot Bitumen @ 1.7 Kg/Sqm. (1.40 Kg Of Vg-40 (30/40 )Grade And 0.30 Kg/Sqm. Of Vg-10 (80/100) Grade) And Joints Filled With Cement Mortar 1 :2 (1 Cement:2 Marble Dust Mixed With Water Proofing Compund All Complete As Per Direction Of Engineer-In-Charge. , Providing And Fixing Steel Gate, Grating , And Grills Made Of Angles, Tees, Square Bars, Flats,Or Black Pipe With Holdfast And Fittings Complete As Per Design And Drawing Including Cutting Welding And Fabrication With Priming Coat Of Red Oxide , Providing And Fixing Of Double Leaf Steel Shutter For Cupboard, The Frame Is Made Of Pressed Steel Isi Section 80X25 Mmx 1.25 Mm Thick With 1.00 Mm Ms Sheet To Spot Welded Including Holdfasts Of 15X3mm, Ms Oxidized Fittings Such As Butt Hinges, Sliding Doors Bolts, Handles, Tower Bolts And Twin Peg Etc Complete Including Applying Priming Coat Of Approved Steel Primer Of Red Oxide Zinc Chromate And Spray Painting In Approved Shade With Deco Paint Of Approved Quality Complete As Per Direction Of Engineer In Charge , Providing And Fixing Of Upvc Sliding Windows: Frame Made From The Extruded Upvc Window Profile Section Of Size 106W X 50H Mm Having Outer Wall Thickness Of 2.5Mm (+/- 0.2Mm) And 3 Box Multi-Chamber Construction, White In Finish, Duly Reinforced With 1.2 Mm Thick Gi Section. Frame Shall Have Three Track Configuration, Vertical Member Of Frame Which Bears The Sliding Shutter Load Shall Have Aluminium Rail/Track For Smooth Sliding Of Shutter Rollers. All The Four Corners Shall Be Mitered Cut & Thermal Welded So As To Form Window Frame. Frame Shall Be Milled With Drain And Air Equalizer Hole In Order To Be Water Tight And For Drainage Of Accumulated Water, If Any, To Outer Side. Shutter : The Shutter Of Sliding Window Shall Be Made Of 39W X 69H Mm Extruded 3 Box Multi- Chamber Upvc Window Profile Section Of White Colour Having Outer Wall Thickness Of 2.5Mm (+/- 0.2Mm) Provided With Reinforcement Of 1.5Mm Thick Gi Section Duly Mitered Cut & Thermal Welded At All Corners And Fitted With Upvc Glazing Bead Of Size 22 X 20 Mm With Inner And Outer Co-Extruded Epdm/Tpe-E Weather Seal Gaskets Alongwith 6Mm Thick Isi Make Plain Float Glass. , Providing And Fixing External Grade Board Solid Core Single Leaf Flush Door Shutters Isi 2202-67 Marked Using Phenol Formal Dehyderesin In Glue Both Sides With Approved Steel Fittings Complete As Per Annexure A : 30 Mm Thick . Commercial Veneer Both Side , Extra For Providing External Lipping With 2Nd Class Teak Wood Battens 6 Mm Minimum Depth On All Edges Of Shutters (Over All Area Of Door Shutter To Be Measured) Over Item No. 8.13. , Providing & Fixing Mica Of Approved Make For Inner/Outer Side Of Shutters With Fevicol & Nails Complete As Per Approved By Engineer In Charge. 0.8Mm Thick Mica , Providing And Fixing In Cm 1 : 4 Double Paitam (Rebated) Stone Door Window And Ventilator Frames Of Approved Quarry: Size 125 X 100Mm , Kota Stone Slab Flooring 25 Mm Thick Over 20 Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) For Area Of Each Slab From 2001 To 5000 Sq.Cm , Providing And Fixing Granite Stone Slab Mirror Polished And Machine Edge Cut In Walls, Pillars, Steps, Shelves, Sills Counters, Floors Etc. Laid On 12Mm (Av.) Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Jointing With White Cement Mortar 1:2 (1White Cement : 2 Marble Dust) With Pigment To Match The Shade Of The Marble Slab Including Grinding, Rubbing And Polishing Complete. Good Quality South Black 1501 Cm2 To 3600 Cm2 Tiles , P & F 1St Quality Heavy Duty Vitrified Double Charged Tiles On Floor, Skirting And Steps Etc.In Different Sizes (Thickness Minimum 10Mm) With Water Absortion Less Than Or Equal 0.08% And Conforming To Is 15622 Of Approved Make In All Colour And Shade, Laid With 20 Mm Thick Cm 1: 4 Including Grounting The Joints With White Cement And Matching Pigment Etc Complete. Size 600 Mm X 1200Mm , Providing And Fixing 14 Mm Thick Acoustical With Fine Fissured Tiles/ Mineral Fibre High Density Tiles With Butt Edges False Ceiling Tiles Of Size 595X595 Mm In True Horizontal Level Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanised Steel Sections ( Galvanized @ 170 Gsm/Sqm.) Consisting Of Main “T” Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38mm Made From 0.30Mm Thick (Minimum) Sheet Spaced At 1200Mm Center To Center And Cross “T” Of Size 24X25mm Made Of 0.30Mm Thick (Minimum) Sheet, 1200Mm Long Spaced Between Main “T” At 600Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross “T” Of Length 600Mm And Size 24X25mm Made Of 0.30 Mm Thick (Minimum) Sheet To Be Interlocked At Middle Of The 1200X600mm Panel To Form Grids Of 600X600mm And Wall Angle Of Size 21X21x0.30 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Wherever, Required, Cutting/Making, Opening For Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc. Main “T” Runners To Be Suspended From Ceiling Using Gi Slotted Cleats Fixed To Ceiling With 6 Mm Dia And 50Mm Long Dash Fasteners, 4Mm Gi Adjustable Rods With Galvanised Level Clips Spaced At 1200Mm Center To Center Along Main T, Bottom Exposed Width Of 24Mm Of All T-Sections Shall Be Pre-Painted With Polyester Paint, All Complete At All Heights As Per Specifications Drawings And As Directed By Engineer-In-Charge. ( The Tiles Should Of 90 % Rh Avg. Ncr 0.55 Light Reflectance 80% Thermal Conductiveity K = 0.052-0.057 W/M K Colour White. Fire Performance Class 0/Class I(Bs 476) With Warranty Against Sag) , Providing And Fixing Of Wall Paneling On Grid Made Out Of Pvc Profile Section Of Size 21X17mm With A Wall Thickness Of 1.5Mm+/-0.2Mm,Fixed On The Existing Wall With Wood Screw Of Size 50Mm X 8Mm With Rowel Plug At A Spacing Of 900Mm Center.Upvc Profile Section Of Size 150Mm X 10Mm With A Wall Thickness Of 1.0Mm+/-0.2Mm To Be Fixed On The Grid By Self Tapping Screw Of Size 19Mm X 6Mm.Necessary Cutouts For Electrical Connection To Be Provided At Required Places. The Edge And Periphery, Finally To Be Covered By Extruded Pvc Beading Section Of Size 28Mm X 12Mm With A Wall Thickness Of 1.0Mm+/-0.2Mm Complete As Per Manufacture’S Specification And Direction Of Engineer-In-Charge. Size 600 Mm X 1200Mm , Granular Sub-Base With Close Graded Material (Table:- 400-1) Plant Mix Method Providing Laying Spreading And Compacting Specified Graded Sand, Gravel (Crushed Stone) As Per Table 400-1,400-2 Or Any Other Course Material As Per Design Mix, As Per Cbr In Sub Base Course Including Premixing The Material At Omc In Wet Mix Plant, Carriage Of Mixed Material Spreading In Uniform Layers With Motor Grader F.E Loader On A Prepared Base And Compacting With Vibratory Roller To Achieve Desired Density (As Per I.S.2720) Including All Material, Labor, Machinery, Lighting Guarding, Barricading And Maintenance Of Diversion Complete.[Morth Specification : Clause 401]. By Mechanical Means. For Grading-Iii Material , Fillling In Foundation Trenches As Per Drawing And Morth Specification Clause 304.3.7 Sand Filling , Interlocking Concrete Block Pavement With M-30 Grade 0.30 Mtr X 0.30 Mtr X 0.15 Mtr Edge Blocks (Measurements Shall Be Made Inner To Inner Side Of Edge Blocks) Providing And Laying Of Interlocking M-30 Grade Concrete Block Pavements Having Thickness 80 Mm As Per Drawings And As Per Is 15658:2006.And All Materials Shall Conform To Morth Specification Clause 602 With M-30 Grade 0.30 Mtr X 0.30 Mtr X 0.15 Mtr Edge Blocks. Category B : Dentated Only Two Side Like I,Z,T Shape As Per Irc:Sp:63-2004 , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work , Repair Of Door, Window Shutters Including Cost Of Material And Labour For Change Of Damaged : Panel By Wire Gauge 14 Mesh X 24 Gauge , Repair Of Door, Window Shutters Including Cost Of Material And Labour For Change Of Damaged : Panel By Plain Glass Panes 4Mm Thick , P & F Lst Quality Wvc Urinal (Is:2556 Mark) With 25Mm Dia G.I. Waste Pipe, Dome Waste Couplings, Concealed Iron Brackets Or Screws Etc Complete. Flat Back (Small) Size 456X355x265mm. , P & F Lst Quality Wvc Urinal (Is:2556 Mark) With 25Mm Dia G.I. Waste Pipe, Dome Waste Couplings, Concealed Iron Brackets Or Screws Etc Complete. Flat Back (Large) Or Half Stall Size 610X400x80mm. , P & F Wvc Wash Basin (Ist Quality Is:2556 Mark) Of Approved Make With C.I. Brackets Duly Painted 1 No. 15 Mm C.P. Pillar Cock (Is:8934 Mark) & 32 Mm C.P. Brass Waste Coupling Of Approved Make, P.V.C Waste Pipe With Pvc Nut 32 Mm Complete Including Cutting & Making Good The Wall : Size 450 Mm X 300 Mm , P & F Wvc Wash Basin (Ist Quality Is:2556 Mark) Of Approved Make With C.I. Brackets Duly Painted 1 No. 15 Mm C.P. Pillar Cock (Is:8934 Mark) & 32 Mm C.P. Brass Waste Coupling Of Approved Make, P.V.C Waste Pipe With Pvc Nut 32 Mm Complete Including Cutting & Making Good The Wall : Size 510 Mm X 400 Mm , P & F Wvc (10 Litres) Low-Level Flushing Cistern With Cover. , Providing And Fixing To Existing Door Frames. 30Mm Thick Factory Made Solid Panel Pvc Door Shutter Consisting Of Frame Made Out Of M.S. Tubes Of 19 Gauge Thickness And Size Of 19Mm X 19Mm For Stiles And 15 Mm X15mm , Top & Bottom Rails. M.S .Frame Shall Have A Coat Of Steel Primers Of Approved Make And Manufacture M.S. Frame Covered With 5Mm Thick Heat Moulded Pvc ‘C Channel Of Size 30Mm Thickness, 70Mm Width Out Of Which 50Mm Shall Be Flat And 20Mm Shall Be Tapered In 45 Degree Angle On Either Side Forming Stiles; And 5Mm Thick, 95Mm Wide Pvc Sheet Out Of Which 75 Mm Shall Be Flat And 20Mm Shall Be Tapered In 45 Degree On The Inner Side To Form Top And Bottom Rail And 115Mm Wide Pvc Sheet Out Of Which 75 Mm Shall Be Flat And 20Mm Shall Be Tapered On Both Sides To Form Lock Rail. Top Bottom And Lock Rails Shall Be Provided Either Side Of The Panel. 10Mm (5Mm X 2) Thick, 20Mm Wide Cross Pvc Sheet Shall Be Provided As Gap Insert For Top Rail & Bottom Rail. Panelling Of 5Mm Thick Pvc Sheet To Be Fitted In The M.S. Frame Welded/ Sealed To The Stiles & Rails With 7Mm (5Mm +2Mm) Thick X 15Mm Wide Pvc Sheet Bending On Inner Side, And Joined Together With Solvent Cement Adhesive. An Additional 5Mm Thick Pvc Strip Of 20Mm Width Is To Be Stuck On The Interior Side Of The ‘C Channel Using Pvc Solvent Adhesive Etc. Complete As Per Direction Of Engineer-In-Charge, Manufacture’S Specification & Drawing.(For W.C.And Bathroom Door Shutter). , Providing And Fixing Factory Made P.V.C. Door Frame Of Size 50X47mm With A Wall Thickness Of 5Mm, Made Out Of Extruded 5Mm Rigid Pvc Foam Sheet Mitred At Corners And Joined With 2 Nos. Of 150Mm Long Brackets Of 15X15mm M.S. Square Tube, The Vertical Door Profiles To Be Reinforced With 19X19mm M.S. Square Tube Of 19 Gauge, Epdm Rubber Gasket Weather Seal To Be Provided Through Out The Frame. The Door Frame To Be Fixed To The Wall Using M.S. Screws Of 65/100Mm Size Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge. , Repairs To Plaster Of Thickness 12Mm To 20Mm In Patches Of Area 2.5 Sq. Metres And Under Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground Within 50 M Lead With Cement Mortar 1 :4 ( 1 Cement : 4 Coarse Sand) , Providing And Applying White Cement Based Putty Over Plastered Surface To Prepare The Surface Even And Smooth Complete New Plastered Surface (Three Or More Coats) , Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade Including All Scaffolding: Old Work (One Or More Coats ) , P & F Pvc Storage Tank Isi Marked (Is : 12701) Indicating The Bis License No), Of Approved Make With Cover, 25Mm Dia 1M Long G.I. Over-Flow Pipe & 25 Cm. Long Wash Out Pipe With Plug & Socket, Including Making Connection Etc., Complete Of Approved Design: 500 (-Do-) , P & F Ball Cock (Is :1703 Mark) With Rod & P.V.C. Ball Complete : Brass Wt.Not Less Than 400 Gm, 20Mm. , P&F Rigid Pvc Pipe (Is:4985 Mark) Class Ii/ (4 Kg. /Cm2.) Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. 110 Mm Dia , P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant: Coupler (Socket) 110Mm Dia , P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant: Plain Tee 110Mm Dia , P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant: Bend 45 110Mm Dia , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes (Is 15778 : 2007 Code) Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings, This Included Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement , Trenching Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge (External Work). 15 Mm Nominal Size , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes (Is 15778 : 2007 Code) Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings, This Included Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement , Trenching Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge (External Work). 25Mm Nominal Size , P & F Bib Cock (Is : 8931 Mark), Superior Quality Of Approved Make: (-Do-) Long Body, 15Mm Nominal Bore Weight Not Less Than 690 Gm , P & F Inlet Connection (Angle Valves) Superior Quality, Of Approved Make, For Wash Basin, Gyser Etc. C.P. Inlet Connection 15Mm.Brass (Is : 8931 Marked)
