Bids Are Invited For Providing, supplying and placing of 1-Bay Optimizer (Push-Pull Type). Overall Dimensions of SS1 - Single Static 1 Bay Push Pull Type(U/C + Fittings) shall be 1200mm (W) x 400mm (D) x 2080mm (H) - 1 unit. Overall Dimensions of SL1 - Single last 1 Bay Push Pull Type (U/C + Fittings) shall be 1200mm (W) x 400mm (D) x 2080mm (H)- 1 unit. Overall Dimensions of TM1 - Twin Mobile 1 Bay Push Pull Type(U/C + Fittings + Handle) shall be 1200mm (W) x 800mm (D) x 2080mm(H)- 3 units. The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS:513. Final finish consists of epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of minimum 40 microns. Shelf construction made of 0.7 thk CRCA steel conforming to IS: 513 Gr.D or DD.Uniformly distributed load capacity of 60 Kg. Undercarriage shall have construction in welded frame CRCA sheet 2 mm thk conforming to IS:513. The movements of the system shall be Push pull configuration: Movement of units achieved by pushing or pulling C tyep plastic handle (mounted on each double & single movable units) & rigidly fixed at suitable height on body side. Each movable body shall also have an understructure with 4 nos. of antifriction ball bearings for rolling on channels. The twin moving body, i.e. TM, shall have 4 nos. of bearing fitted horizontally to restrict the lateral movement of the body on rail while the single moving body, i.e. SL, body shall have 2 nos. of a special antitilt bearing assembly fitted to the understructure which not only restricts lateral movement but also prevents SL from toppling. A centralized locking arrangement shall be provided through Locking Stiffener mounted onto back of Single Last unit, i.e. SL body. It shall get locked into the channels when all the units shall be brought together, and the lock shall be turned. The recess handle lock shall be of Godrej make & placed at a height of 940mm from ground level. The locking stiffener shall be made of 1.2 mm thk conforming to IS:513.The nuts & bolts shall be galvanized / blackodized / Zn Plated. Label Holder: It shall be an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover of body. The paper shall be 300GSM matt milky white sticker paper, to be inserted into the aluminium extrusion. The length of paper shall be 394mm for LD/SD and 794mm for TD. Over that a transparent plastic of corresponding length of 150-200 micron polythene shall to be inserted. Twin Body construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS:513. Each body shall have a main unit plus add on units (1,2,3,4,5). Finish shall be Epoxy polyester powder coated thickness of 40 microns. Rail: It shall consist of ‘C’ section 2 mm thk HR sheet & Square 25.4mm X 2mm thk ERW tube – both connected by screws. Prior to the grouting of the guide channels with the help of raul plug & screw, ensure the ground is level. The rail channels shall be of 2 lengths i.e.1600mm and 2400mm. Certifications: The product should be certified with Greenguard(UL) and the company should be certified with ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 50001:2018, BIFMA Membership and AIOTA. The material should be supplied strictly as per specification, approved sample and as per direction of the Engineer-in-Charg Providing, supplying and placing of Executive Table with ERU. Overall Size: 1650mm (W) x 1650mm (D) x 750mm (H). The main table shall be of size- 1650mm (W) x 750mm (D) x 750mm (H). The side unit shall be of size- 900mm (W) x 450mm (D) x 750mm (H). The table shall be made of 25mm thick MDF- one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top shall be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel of table shall be made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure shall be made of 25mm thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banded with matching 2mm thick PVC lipping. The pedestal shall be made of 25mm thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS12823:1990, edge banded with matching 2mm thick PVC lipping. Drawer fronts made of 25mm thick MDF- one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top pedestal construction shall be BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension of table shall be 325mm. Drawers shall have a soft closing & anti slam mechanism. Handles shall be provided for ease of opening. Pedestal shall be provided with lock for security. Certifications: The product should be certified with Greenguard(UL) and the company should be certified with ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 50001:2018, BIFMA Membership and AIOTA. The material should be supplied strictly as per specification, approved sample and as per direction of the Engineer-in-Charge. Supplying and Placing of Single Bed. Overall Size: 2060mm (W) x 1131mm (D) x 945mm (H). Material: Bed Structure should be consist of metal frames made of M.S. Channels in 1.0 mm thickness. Horizontal plinths and bottom plinth should be made of 25 mm thick Prelaminated Particle Board. Head board should be made of 18 mm thick. Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Tail board should be made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Side rail should be made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it. Mattress panels of Bed should be made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Construction: Knock Down construction. Finish :18 mm thick Prelaminated Particle Board should be in Walnut shade. Metal frames should be powder coated in shade Mat Black to the thickness of 50 microns(+-10). Certifications: The company should be certified with ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 50001:2018, BIFMA Membership and AIOTA. The material should be supplied strictly as per specification, approved sample and as per direction of the Engineer-in-Charge Supplying and Placing of Single Bed. Overall Size: 2060mm (W) x 1131mm (D) x 945mm (H). Material: Bed Structure should be consist of metal frames made of M.S. Channels in 1.0 mm thickness. Horizontal plinths and bottom plinth should be made of 25 mm thick Prelaminated Particle Board. Head board should be made of 18 mm thick. Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Tail board should be made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Side rail should be made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it. Mattress panels of Bed should be made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Construction: Knock Down construction. Finish :18 mm thick Prelaminated Particle Board should be in Walnut shade. Metal frames should be powder coated in shade Mat Black to the thickness of 50 microns(+-10). Certifications: The company should be certified with ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 50001:2018, BIFMA Membership and AIOTA. The material should be supplied strictly as per specification, approved sample and as per direction of the Engineer-in-Charge Providing, supplying and placing of steel cupboard full height UNIT- SIZE Width W - 900mm Height H - (With Metal Top) - 1950mm. Height including leveler Height with zero position.Aesthetically appealing completely knock down construction. Made from combination of side panel(0.5mm CRCA), Bottom panel(0.5mmCRCA), Back panel(0.5mm for 900 width Storage Units to avoid toppling of unit in caseof Glass door unit and single door unit), Top Bottom stiffener(1.2mm CRCA) andEnd Cover(0.6mm CRCA). CRCA D Grade as per IS-513. All metal panels are coated with Epoxy polyster powder of 50±10 microns thickness. Metal Top Panel (0.6mm CRCA) bent panel which is powder coated with Epoxypolyster powder of 50±10 microns thickness. Fixed shelves made up of 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513). No. fixed shelf for 750mm height and 2NO. Fixed shelf for other remaining heights. A4 size box file (85Wx345Hx285D) can be stored vertically.Number of files that can be stored per shelf is 10 Nos.Each shelf has max Load Capacity of 55kg UDL for 900W unit. Metal base plate (1.6mm CRCA) with Screw type adjustable leveler with plasticbase provides vertical adjustment for floor unevenness and leveling of units. Height of Leveller is 50mm and 25mm Leveller adjustment available. HINGE COVER CAP: Metal diecasted cap powder coated with Epoxy polyster powder of 50±10 microns thickness to cover the hinge holes with plastic expandable socket for open shelf unit only. NAME TAG STICKER 120mmx 18mm Shelf Sticker Made up of material polyester and adhesive TESA4965 on the left side of shelves.For 900mm Width storage Unit - Each Door width is 448mm (Double Shutter - 1LH and 1RH). 4.Inbuilt Handle. LOCKING DETAILS: Cam Lock -3 Way locking provision.-Click action mechanism.-Key removable in locked and unlocked positions. -Zinc alloy die cast housing. NAME TAG STICKER: 120mmx 18mm Shelf Sticker Made up of material polyester and adhesive TESA4965 on the door at left top corner. The product must be Green Guard (UL), Green PRO, along with Manufacturer with ISO 9001, ISO 45001, ISO 50001, GRIHA and IGBC certified.The product must be Green Guard (UL), Green PRO, along with Manufacturer with ISO 9001, ISO 45001, ISO 50001, GRIHA and IGBC certified.The material should be supplied strictly as per specification, approved sample and as per direction of the Engineer-in-Charge; The customized almira shall be designed and fabricated strictly as per the dedicated space provided at site, with dimensions finalized after actual measurement. The body, shutters, and shelving shall be constructed from pre-laminated particle board (18 mm thick) with a smooth melamine surface finish on both sides, ensuring durability and ease of maintenance. All exposed edges shall be machine-edged with 2 mm PVC edge banding for a seamless appearance and resistance to chipping. Shutters may be provided with swing-type concealed hinges or sliding channels as per space constraints, fitted with heavy-duty handles and multipoint locking systems of reputed make. The internal configuration shall include shelves at 300 mm vertical pitch along with optional provision for drawers, hanging rods, or locker compartments as per user requirements. The design shall allow for modular installation, with proper anchoring to wall or floor where necessary. The finish shade shall be finalized in consultation with the client from the available pre-laminate colour range. The entire unit will be supplied, delivered, and installed on site as per specification, approved sample and as per direction of the Engineer-in-Charge. ....more in document Total Quantity : 2606
