Tender For Electrical Works At Narasapuram Branch, Kurnool-Andhra Pradesh

Tender For Electrical Works At Narasapuram Branch POINT WIRING Note: Supplying, laying, connection & testing of light, fan point, wiring by 2x1.5sq.mm+1.5sq.mm PVC insulated copper flexible wire maintaining the colour code as per direction in PVC conduit of 20mm with ISI mark 1.5mm thickness to conceal in wall partition mending good the damage, complete with PVC circular box, bend to be done as per drawings including 3 point ceiling rose wherever required GI saddle to be used ffor fixing, metal flexible, PVC flexible pipe may use if required in partition wall. All PVC pipes should be with ISI mark. No joints will be allowed inside pipe, light, fan and plug point complete with modular type switch plate & MS box including the mein circuit line 2x2.5mm+1x1.5sq.mm earth PVC insulated copper wire, maintaining the colour code. Circuit line for lighting switch board, 6 Amps plug board are to be drawn from lighting DB to lighting board & plug point board, 6/16 amps plug point line are to be draw from power DB amps plug to be & 6/16 plug point board. 3 nos. lighting board, 3 nos 6amps connected from one circuit & one 2nos. 6/16 plug to be connected from one circuit. All the wires 4 sq.mm and above shall be terminated with copper pin type plugs. Light point complete with modular type switch, plate, MS conceal box 1.1 a)1 light control by 1 switch PT 21 b)2 light control by 1 switch PT 10 c)Fan control by 1 switch & regulator PT 7 Page | 23 1.2 5 Amp. Socket (Department) Nos. 8 Supply and fixing of 5 Amp. 5 pin combined switch socket outlet with switch in lighting control board including inter connections (Lopped from nearest switch board) 1.3 Call bell point with 1 Buzzer No. 1 Supply and wiring same as item 1.1 above but for call bell point including supply and fixing of 5A bell push along with Buzzer 1.4 Supply fixing & connections of modular type 16 Amps 6 pin socket with 16 amps switch for raw power point with 2x4sq.+2.5sq.mm wire with required PVC conduit and connections Nos. 18 1.5 RUN OF MAINS Supply and wiring with 650V grade PVC insulated copper conductor multistand wires in heavy gauge 25/32mm dia MS conduit concealed in wall/ in suitable width casing and caping of approved quality along with required accessories etc., laid on ceiling through partition a) 2 runs of 4 sq.mm with 1 run of 2.5sq.mm including supply and laying of suitable dia PVC conduit with all accessories from UPS upto sign board mts 40 b) 4 runs of 6 sq.mm with 2 runs of 4 sq,mm including supply and laying of suitable dia MS conduit with all accessories (LDB & PDB) mts 30 c) Supply and installation of 70 sq.mm x 3 ½ core LTUG cable 1100V grade IS 1554 in surface with all required accessories including labour complete mts 25 d) Supply and end termination of 3 ½ x 70 sq.mm Aluminium Armored Cables with required Gland, copper lugs and all materials etc., complete set 8 1.6 MCB Distribution Boards Supply and installation of following size MCB Distribution Boards ( Double door IP 42) with MCBs. The MCBs/MCB isolators shall confirm to IS 8828 a) 6 way TPN MCB Db – Double door – (Horizontal type) with 63A, TPN MCB as in No. 1 Page | 24 corner and 12 nos. 6-32A SPMCBs as goings (L & P DB’s) b) MAIN DB : Supply, installation of 8 way VTPN DPX double door type as per TP 42 or IP 55 with 1 No. 125A 4 pole MCCB 25KA as incoming and 2 Nos. of 63A TP MCB’s and 2 nos.32A TPMCB’s and 14 Nos. of 6 to 32A MCB’s with required accessories including termination with suitable sized copper lugs complete. No. 1 1.7 A C Boxes a) Supplying and fixing of 20 Amps 3 pin single-phase metallic plug and socket arrangement with 20 Amps single pole MCB control for AC point control. No 7 2 TELEPHONE WIRING Supplying and laying of heavy duty PVC conduits concealed in wall/ floor and with suitable width casing and capping of adopted quality alongwith required accessories and drawing of 12SWG GI wire as fish wire for laying of telephone cables at a later stage and supply of all fixing materials complete as required a) Supply and fixing of RJ 11 telephone point socket with 2 pair telephone cable from each table to EPABX, this include suitable surface / concealed box and required all materials this included supply and fixing of suitable PVC conduits and cable numbers to provided sets 2 b) Supply and wiring of telephone points wiring with 5 pair copper cable and suitable conduits, required all materials etc., mts 30 c) Supply and fixing of telephone 20 pair Tag box with crone connectors No. 2 3.0 SUPPLY AND FIXING & CONNECTION OF LIGHT FITTING : 3.1 Supply and fixing of following type fluorescent / compact / in candescent / incandescent light fixtures. a) PHILIPS make 1x36 watts ROUND TYPE RECESSED LAMPS OR Equivalent Nos. 20 b) Supply and fixing 2x36W recess mounting mirror optic reflector Philips make 2’x2’square type Twin Tube light set with Nos. 14 Page | all required accessories complete for finished item of work, including the cost and conveyance and all necessary taxes etc., for required labour, material and necessary tools and accessories to execute the work complete for finished item of work c) Tube light fittings Nos. 7 4.0 UPS WIRING BRANCH 4.1 Supply and fixing of 3 nos. of flush type 6A, 5pin combined switch socket outlets in the modular type plastic box including 2 nos. 6A switches in a separate box above table and front plates including 3 runs of 2.5 sq.mm with earth continuity, all taxes, all labour charges with inter connections Nos. 10 4.2 Supply and fixing of 1 no. of flush type 16A, 5 pin sockets with 1 no. 16A switch in the modular type plastic box including interconnections with 3x2.5 sq.mm wire for printer point at cash machines Nos. 6 4.4 2 runs of 6 sq.mm with 1 run of 4 sq.mm for earth (UPS to UPS DB) mts 20 4.5 8 way SPN MCB DB – Double door – ( Horizontal type) with 32A, DP MCB as in corner and 6 nos. 6-10A SPMCBs as out goings (UPSDB) Nos. 2 4.6 Supply, installation, testing and commissioning of 40 A DP MCB with enclose for UPS incoming Nos. 6 45.0 Fixing of wall fans as per plan or where ever required by the branch head

Refer document

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB