|
| 1 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres |
| 2 | Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 m and lead upto 30 M and including filling watering and ramming of excavated earth into the trenches and removal and disposal of surplus earth as directed by the Engineer in Charge up to distance 30m., SI No. 251(a),including labour cess,but excluding GST & other taxes. |
| 3 | Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.As per Reference to MORT&H Specification 2100 SN.9.40 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST |
| 4 | Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications.As per Reference to MORT&H Specification2504 SN. 1540 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST |
| 5 | RCC Grade M30 using batching plant transit mixer & manual placing RCC work in Grade M 30 in Open Foundation & Sub Structure with cement approved coarse sand & two cm gauge well graded grit including necessary shuttering placing & binding of reinforcement including its binding with wire but excluding cost of reinforcement & also including supply of all material , labour , T & P etc.required for completion of work. As per Case II MORTH specification 1500, 1700 & 2100. SN.12.80 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST |
| 6 | RCC Grade M30 using batching plant transit mixer & manual placing RCC work in Grade M 30 in Super Structure with cement approved coarse sand & two cm gauge well graded grit including necessary shuttering placing & binding of reinforcement including its binding with wire but excluding cost of reinforcement & also including supply of all material , labour , T & P etc.required for completion of work. As per Reference to Case II MORTH specification 1500, 1700 & 2100. SN. 12.80 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST |
| 7 | Supplying, fitting and placing Mild steel reinforcement complete in sub-structure and Foundation as per drawing and Technical Specification Section As per Reference to MORT&H Specification1600 & 2200 SN. 12.41 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST |
| 8 | Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification. As per Reference to MORT&H Specification 710.1.4.of IRC:78 & 2200 SN.13.90 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST |
| 9 | Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications. As per Reference to MORT&H Specification2706 & 2200 SN. 13.80 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST |
| 10 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads up to 05 Km. leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. |
| 11 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 |
| 12 | Providing, laying, spreading and compacting stone aggregates of G-3 sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. (Gr-III) |
| 13 | Construction of un-reinforced, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing . |
| 14 | Providing and laying of interlocking tiles concrete block pavement having thickness 80 mm with 3 cm compacted fine sand bed as per drawings and technical specification as per direction of Engineer in charge |
| 15 | Earth work in foundationin in ordinary soil all same as S.O.R item no. 251 (a) |
| 16 | Cement concrete with 4cm. Gauge stone ballast,coarse sand and cement in 8:4:1 proportion all same as S.O.R item 281. |
| 17 | R.C.C, work with cement ,approved coarse sand,2cm. Gauge approved stone grit for slab in 1:1.5:3 all same as c.b.n.284 |
| 18 | M.S,(tor steel or plain ) work such as R.C.C or R.B work including bending for proper shape an ancluding supply of steel & its westage, bend, hooks and authorsed overlapping shall be measured and including cost of bending wire. Please Enable Macros to View BoQ information |
