Tender For Certain Special Repair, Minor Works And Revenue Works In The Aor Of Age E/M Under Ge Kapurthala; 1 Supply and fix electric water heater storage type ABS body with metalic inner tank & heating element upto 2KW capacity 25Ltr, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, steel braided 450 mm long connection piece, nut, grouting bolts and washers to fixing on wallincluding making good and match existing surfaces and complete all as specified and as directed by Engr-in-Charge. Make : Crompton/Havells/Bajaj 2 M&L for point wiring with 2.5 Sq mm single core multi-stranded copper conductor PVC (FR) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 2.50 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board. 3 M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 2.5 Sqmm 1100 volts grade drawn PVC concealed conduit of size19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 2.5 Sqmm single core copper conductormulti-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engineer-in-Charge. Note : Two run of 2.5 Sqmm cable one run of 2.5 Sqmm cable as earth continuity conductor and one run of PVC Conduit shall be measured & paid as one unit.) 4 Supply and fixing sheet metal enlosure single pole and neutral with two pin socket and earth plug complete with one MCB single pole 240 volts 20 amps complete all as specified and directed by EIC. Make : Legrand/Havells/L&T 5 S & F of MCB, 10 to 32 Amp, SPN, 240 Volt Make - Legrand/Schneide/Siemens-Betagard 6 Supply and fixing GI pipe medium grade with all fitting fixing on wall of size 15 mm bore complete all as specified and directed. 7 M&L for Hot water tap of brass/gun metal 15 mm bore complete all as specified and as directed by Engr-in-charge. 8 S&F ceiling fans completewith blades, canopy, suitable regulators down rods and accessories, 230 V, 1200mm sweep. Min air delivery 210 CMMwith service value 6.00 BEE. Five starrated with brushless direct current motor(BLDC) and connecting up and including provision of twisted three core PVC insulated flexible cord of 0.75 Sqmm copper conductor of required length from ceiling rose/connector to fan complete all as specified and directed. Make : Atomberg/Havells/Bajaj/Crompton 9 M&L for excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and gettingout including trimming of sides complete all as specifiedand directed by Engineer-in-Charge. 10 M&L for returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer compete all as specified and directed by Engineer-in-Charge. 11 M&L for removal of surplus spoil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point completeall as specified and directed by Engineer-in-charge. 12 M&L for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified. 13 M&L for cable protection using old size sub class ‘B’new bricks, laid flat dry but jointed, laid length wiseperpendicular to theaxis of cable all as specified and directed. 14 Supply, laying jointing and testing under ground XLPE armouredcableinsulated and PVC seathed LT 1100 volt grade (heavy duty) with strandedaluminum conductor of size 35 Sqm 3.5core confirming to IS laid in trenches, in floor, in duct, through pipes or along the pole complete all as specified and directed by the Engineer-in-Charge. 15 Supply, laying jointing and testing under ground XLPE armouredcableinsulated and PVC seathed LT 1100 volt grade (heavy duty) with strandedaluminum conductor of size 50 Sqmm 3.5core confirming to IS laid in trenches, in floor, in duct, through pipes or along the pole complete all as specified and directed by the Engineer-in-Charge. 16 (i) M&L for High mast steel tubuler structure15 metre long with Grade S-355 as per BS EN 10025 for shaft and gussets and grade FE-410 WA as per IS-2062 for 8 lantern symmetrically fitted along with their control gear and having two point suspension system with stainless steel wire rope of 6 mm dia97/19 guage and double drum winch with luminaire mounting arm, pully assembly, LED domeaviation obstruction light with LED lamp, lightning arrester spike flange and door stiffness construction in two section longitudinal and welded in one section with thickness of sheet 3mm top and 4mm bottomand final including necessary excavation returning fillingremoval of soil from site all and PCC/RCC foundation of high mast light as per manufacturer design as spcified and comprising the following dimensions with the following accessories :- (Make :- Bajaj electrical Ltd/Philips/Crompton Greavers/Havells.Note: All accessories including Motor, Lantern carriage ring, winch, Stainless steel wire rope, Tralling cable, push button, power tool etc as specified by the manufacturer.(a)Base dia - 360 mm (approx) (b) Top dia -150 mm (approx) (c) Lighting protection finial -G. single spike of length 1200 mm 17 (ii) size of base plate 520mm thick 25 mm dia complete all as specfied each set-01 Nos(iii) Lantern Carriage:- Lantern carriage ring with class BMS pipe/tube having sleeve on carriage ring 535 mm (ID) dia suitable to mount 08 Nos of lentern fitting symetrically -01 Nos.(iv) Winch :- Winch double drum type having operating speed 180 RPM and gear ratio 53 : 1 working operating manually/electrically with stainless steel wire rope 6mm dia two point suspension system including timble copper Talurit capacity 500 Kgs (per Drum) make lubrication arrangement self lubricant in permanent oil both bath type SAE-90/140 or equivalent each Job -01 No.(iv) Winch :- Winch double drum type having operating speed 180 RPM and gear ratio 53 : 1 working operating manually/electrically with stainless steel wire rope 6mm dia two point suspension system including timble copper Talurit capacity 500 Kgs (per Drum) make lubrication arrangement self lubricant in permanent oil both bath type SAE-90/140 or equivalent each Job -01 No.(v) Stainless steel wire rope:- Diameter of SS rope 6 mm, AISI 304 grade, construction of SS rope 7/19 , stainless steel of centre core material DIN 3060, 3 Nos rope of 6 mm for Lantern Carriage, 2 Nos of 6 mm for Double drum Winch, breaking load capcity of SS wire rope are 2350 Kgs per SS rope.(vi) Trailing Cable :- Copper conductor cable PVC sheathed 1100 volt grade of size 4.00 Sq mm PVC insulataed from electrical box to streetlight fittings separately for nine fittings each Job -01 No.(vii) Push button control 415 Volt 3 phase 50HZ 1440 RPM single speed 1100 watt torque lifting capacity 750 Kgs adjustable mechanically tripping device complete all as specified.(viii) Power Tool:- 1.5 HP motor integral model, single speed, reversible 415 volts/240 Volts with mechanical tripping facility. 18 M & L for earthing with galvanized iron earth plate electrode 600mm x 600mm, 6mm thick buried directly in ground vertically in a earth pit not less than 2.25mtr below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level connected to GIstrip 32x6 mm by means of GI bolts, nuts, check nuts and washers (earth plate covered with alternate layers of charcoal dust and common salt 15cm thick), GI strip 32x6mm protected by GI pipe medium grade 40 mm dia upto switch board and connected to main switch board including provision of GI pipe 20 mm dia medium grade watering pipe with funnel and wire mesh, all as shown in Electrical Plate No. 3 of SSR Part-I, including PCC chamber (1:3:6) using 20mm graded stone aggregate and CI cover and frame including all necessary excavation and earth work and taking out old earthing complete all as specified and directed by Engineer-in-charge 19 Supply and fixing LED flood light fitting 100 watt long life LED module with SMD LED Package mounted on MCPCB for better distribution, efficiency not less than 105 lumens/watt with toughned glass IK07, for high mast energy saving, environment friendly, long life with pressure die cast housing IP 66 protection, Efficient high output emitter LED for better distribution including clamp on bracket suitable for fixing of LED flood light fitting including necessary connection complete all as directed by Engr-in-Charge. Make Crompton/ Bajaj/ Havells. 20 Supply,install test and comprising of factory made powder coated cubical outdoor LT feeder pillar box of size 900 x 750 x 300 mm confirming to IP-65, CPRI approved complete weather proof and vermin proof and the shell of 3.15 mm thick MS sheet with partitions and switch enclosure doors of 2 mm MS sheet with minimum clearance of 750 mm and canopy made out of 3.15 mm thick MS sheet all as per IS shall be availableinside for easy access and workingcondition fixed on angle iron frame 50 x 50 x 6mm. Mounted on brick masonry pillars with a clearance of atleast 0.45 mtrs above GL on 100mm thick appron of PCC 1;4;8 type D-2 provided 1.0 mtr all around with a slight outward slope to avoid stagnation of water,marking to indentify incoming and outgoing circuits and earthing pillar box at two points out door feeder pillar box comprising of following:- Make for switch gear: L&T/Schneider/Siemens/Legrand.(a)MCCB 63 Amp,4 pole25 KA,415 volt ICU 100% ICS with thermal based release = 02 Nos (01 Incomer, 01 spare)(b) Timer switch Analog outdoor type factory made powder coated all along internal and external surfaces, weather proof, dust and water proof with I P 55 protection, consisting of 01 No AC contactor 3 pahse 16 Amp capacity 10 KA, one digital Timer switch with 16 Amp three Nos MCB SP 10 Amp 10 KAhaving both auto manual and by pass system - 01 No mounted on existingpanel with suitbale size clamps complete all as specified and directed.Make : Indoasian Model Time lite 16 Amp 3 pole Cat Part No TLO16ABO or equivalent CAT Part of make Scheneider/Legrand/ Standard/Havells.(c) Reversing starter Capacity 2 HP/1.5 KW with contactor size 18, overload relay range 2.5-4 Amp Cat part No IHPREVHB* of Make Havells or equivalent in L&T/Standard 21 Supply & fixing GI pipe light grade 80 mm bore for cable protection fixed to pole/along wall/floor/under road etc complete all as specified and directed. Note : Clamps nuts & bolts etc shall be measured and paid for separately under appropriate items of sch A 22 M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good to disturbed surface of wall/floor/etc including one run of 6.00 Sqmm single core copper conductormulti-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engineer-in-Charge. Note : Three run of 6.00 Sqmm cableand one run of PVC Conduit shall be measured & paid as one unit.) 23 M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed. 24 (i) M&L for High mast steel tubuler structure20 metre long with Grade S-355 as per BS EN 10025 for shaft and gussets and grade FE-410 WA as per IS-2062 for 9 lantern symmetrically fitted along with their control gear electrically/mannually operated and having two point suspension system with stainless steel wire rope of 6 mm dia97/19 guage and double drum winch with luminaire mounting arm, pully assembly, LED domeaviation obstruction light with LED lamp, lightning arrester spike flange and door stiffness construction in two section longitudinal and welded in one section with thickness of sheet 3mm top and 4mm bottomand final including necessary excavation returning fillingremoval of soil from site all and PCC/RCC foundation of high mast light as per manufacturer design as spcified and comprising the following dimensions with the following accessories :- (Make :- Bajaj electrical Ltd/Philips/Crompton Greavers/Havells.Note: All accessories including Motor, Lantern carriage ring, winch, Stainless steel wire rope, Tralling cable, push button, power tool etc as specified by the manufacturer.(a)Bottom dia - not less than 485 mm . (b) Top dia - not less than 200 mm suitable for bearing wind velocity as per IS 875 (Part III) (c) Lighting protection finial -G. single spike of length 1200 mm 25 (ii) Lantern Carriage:- Lantern carriage ring with class BMS pipe/tube having sleeve on carriage ring 535 mm (ID) dia suitable to mount 09 Nos of lentern fitting symetrically -01 Nos.(iii) Winch :- Winch double drum type having operating speed 180 RPM and gear ratio 53 : 1 working operating manually/electrically with stainless steel wire rope 6mm dia too point suspension system including timble copper Talurit capacity 500 Kgs (per Drum) make lubrication arrangement self lubricant in permanent oil both bath type SAE-90/140 or equivalent each Job -01 No.(iv) Stainless steel wire rope:- Diameter of SS rope 6 mm, AISI 304 grade, construction of SS rope 7/19 , stainless steel of centre core material DIN 3060, 3 Nos rope of 6 mm for Lantern Carriage, 2 Nos of 6 mm for Double drum Winch, breaking load capcity of SS wire rope are 2350 Kgs per SS rope.(v) Trailing Cable :- Copper conductor cable PVC sheathed 1100 volt grade of size 4.00 Sq mm PVC insulataed from electrical box to streetlight fittings separately for nine fittings each Job -01 No.(vi) Push button control 415 Volt 3 phase 50HZ 1440 RPM single speed 1100 watt torque lifting capacity min 750 Kgs adjustable mechanically tripping device complete all as specified.(viii) Power Tool:_ 2 HP motor integral model, single speed, reversible 415 Volts with mechanical tripping facility. 26 Supply and fixing LED flood light fitting 200 watt long life LED module with SMD LED Package mounted on MCPCB for better distribution, efficiency not less than 105 lumens/watt with toughned glass IK07, for high mast energy saving, environment friendly, long life with pressure die cast housing IP 66/67 protection, including clamp on bracket suitable for fixing of LED flood light fitting including necessary connection complete all as directed by Engr-in-Charge. Make - Crompton/ Bajaj/ Havells. 27 M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate for fdn of poles, stay etc. 28 Taking down GI pipe line from trench/wall/floor/roof stacking it reuse or issued to contrctroctor as credit of following sizes 29 GI pipe of 15mm bore complete all as specified. 30 GI pipe of 20mm bore complete all as specified. 31 GI pipe of 25mm bore complete all as specified. 32 GI pipe of 40mm bore bcomplete all as specified. 33 GI pipe of 50mm bore complete all as specified. 34 Refixing old rerived srviceable GI pipe line on trench/wall/floor/roof of following sizes 35 GI pipe of 15mm bore complete all as specified. 36 GI pipe of 20mm bore complete all as specified. 37 GI pipe of 25mm bore complete all as specified. 38 GI pipe of 40mm bore bcomplete all as specified. 39 GI pipe of 50mm bore complete all as specified. 40 Supply and fixing GI tubing medium gradein any length with all fitting laid in trench/wall/floor/roofand connecting up with water supply main complete all as specified and directed 41 GI pipe of 15mm bore complete all as specified. 42 GI pipe of 20mm bore complete all as specified. 43 GI pipe of 25mm bore complete all as specified. 44 GI pipe of 40mm bore bcomplete all as specified. 45 GI pipe of 50mm bore complete all as specified. 46 Taking down CI pipeline from trench stacking it reuse or issued to contrctroctor as credit of following sizes 47 CI pipe 100 mm bore complete all as specified. 48 CI pipe 150 mm bore complete all as specified. 49 Refixing old rerived srviceable CI pipe of any description in trench of following sizes 50 CI pipe 100 mm bore complete all as specified. 51 CI pipe 150 mm bore complete all as specified. 52 Supply and fixing DI pipe K9in any lengthlaid in trenchand connecting up with water supply main complete including jointes all as specified and directed 53 DI K7 pipe 100 mm bore complete all as specified. 54 DI K7 pipe 150 mm bore complete all as specified. 55 Supply and fixing in replacement cast iron fitting such as bends, tapers, (any type, radius and angle) tapers any type,(straight, bend, increasing,decreasing or double socket etc.)Tee pieces single branch. Y junction, double branch, cross(all sockets or socket and spigot) collars, caps and plugs tee pieces, single branch for spigot and socket and flanged pipe up to 150 mm bore complete all as specified and directed. 56 Supply and fixing in replacment cast iron sluice valve80 mm bore with flanged ends, ISI mark with Gun metal spindle, CI gate with brass ring and iron wheel handle with jointing material such as nuts /bolts washers and rubber insertion sheet etc including taking out old U/S sluice valve complete all as specified 57 - ditto - all as per ser item No. 33 above here in before but 100 mm bore complete all as specified. 58 - ditto - all as per ser item No. 33 above here in before but 150 mm bore complete all as specified. 59 M&L for valve pits of internal dimensions 90cm x 90 cm x 90 cmmaking good disturbed/dismantled brick work in cement mortar (1:4) plastering surfaces in CM 1:6, 15mm thick and PCC coping in cement concrete 1:2:4 type B-1 and providing MS cover in replacement made out of MS sheet 3 mm thick duly welded to MS angle iron frame 35x35x5mmincluding frame work as per existing sizewith two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.(a) M&L for brick work using sub class B (old size bricks) in CM 1:4 (b) M&L for rendering 15 mm thick in CM 1:4 finishing even and fair (c) M&L for PCC 1:2:4 type B-0 (using cum 12.5 mm graded stone aggregate ) as in coping (d) M&L for any type of mild steel work such as frame sheet 3 mm thick including welding (e) M&L for painting two coats of synthetic enamel paint over a coat of red oxide primer to untreated steel surface & prep of surface. 60 M&L for lead joint suitable for CI pipe 80 mm bore complete all as specified and directed. 61 M&L for lead joint suitable for CI pipe 100 mm bore complete all as specified and directed. 62 M&L for lead joint suitable for CI pipe 150 mm bore complete all as specified and directed. 63 Supply and fix in replacment of gun metal globe or gate valve with iron wheel head screwed both ends suitable for galvanised pipe 20 mm bore complete all as specified. 64 - ditto - all as per ser item No. 40 above here in before but 25 mm bore complete all as specified. 65 - ditto - all as per ser item No. 40 above here in before but 40 mm bore complete all as specified. 66 Taking down old unserviceable float valve and fixing new one suitable for 20mm dia pipe complete 67 Taking down old serviceable float valve and re-fixing after reapir suitable for 20mm dia pipe complete 68 PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in block mass concrete below and above the ground level for resting pipe line allas specified and directed.
