|
| 1 | Excavation in post holes(or similar holes) each n. exc 0.5 Cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc exc 25 cm watering and removing surplus soil to a distance n exc 50 m and making good surface as in soft/loose soil complete all as specified and directed |
| 2 | M&L for cement concrete Type C-2, 1:3:6(using 40 mm graded crushed stone aggregate) in post, boundary pillars etc, complete all as specified and directed |
| 3 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified and directed |
| 4 | M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified and directed |
| 5 | M&L for 16 to 18mm thick granite stone (of any type ) work (table rubbed and polished)in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including Rounding, grinding and mirror polishing complete all as specified and directed (Note : Colour of granite shall be as approved by GE) |
| 6 | M&L for precast cement concrete block masonry exc. 10 cm width with solid blockC1 (1:3:6) (using 20 mm graded stone aggregate) and settingin cement mortar (1:6) complete all as specified and directed |
| 7 | S& F for 25mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and directed |
| 8 | M&L for Plain cement concrete 1:3:6, Type C2 (using 40mm graded crushed) stone aggregate as in foundation, filling and mass concrete etc., complete all as specified and directed. |
| 9 | S&F of Structural Steel work as in columns, posts, stanchions etcusing ERW or induction butt welded tubes conforming to IS-1161-1998 grade St.-240or with holow structural steel sections conforming to IS 4923-1997 Grade St-240 complete all as specified and directed |
| 10 | S&F of Structural Steel work as in main and cross beams, hip and jack rafters, purlins where connected to common rafters , vertical posts, etc fixed with angle cleats or other connecting plates, cleats etc. using ERW or induction butt welded tubes conforming to IS-1161-1998 grade St.-240or with hollow structural steel sections conforming to IS 4923-1997 Grade St-240 complete all as specified and directed |
| 11 | M&L for Rolled mild steel inPlates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment. complete all as specified and directed |
| 12 | S&F Pre painted galvalume aluminium zinc coating GI based corrugated sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall with self tapping screws complete all as specified and as directed. |
| 13 | S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall with self tapping screws complete all as specified and as directed. |
| 14 | M&L for preparation of new steel surfaces and applyingtwo coats of synthetic enamel paint over a coat of red oxide zinc crome primer on Surfaces of any description,over 10cm in width or girth, not otherwise described complete all as specified and as directed. |
| 15 | M & L for Excavating over areas, n exc 1.5 m deep and getting out in any type of Soil complete all as specified and directed |
| 16 | Surface excavation nexc 30 cm deep and averaging 15 Cm deep and getting out in any type of soil complete all as specified and directed |
| 17 | Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed |
| 18 | M & L for cement concrete 1:4:8 type D2 ( using 40 mm graded crushed stone aggregate) as in foundation, filling mass concrete complete all as specified and as directed. |
| 19 | M&L for precast cement concrete solid block masonry with solid blocks using PCC 1:3:6, type C1 (using 20mm graded stone aggregate), exc. 10cm in width, set in CM 1:4 complete all as specified and directed |
| 20 | M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement.complete all as specified and directed |
| 21 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410W(GdeE-250) quality B complete all as specified and directed |
| 22 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc and fixed by riveting or welding or with nut and bolts (including nuts and bolts) conforming to Fe-410-W grade E 251 Quality B complete all as specified and directed. |
| 23 | M&L for Preparation of new wall surfaces and applying two coats of cement based paint over a coat of primer on wall surfaces complete all as specified and directed |
| 24 | M&L for PCC cement 1:4:8 type D-2 using 40 mm graded crushed stone aggregate in 75mm thick as in sub base.complete all as specified and directed |
| 25 | M & L for Chequered cement concrete tiles, with grey cement and pigment 30cm x 30cm x 20mm thick set, jointed and pointed in neat cement slurrry in floors including 20mm thick screed bed in Cm 1:4 complete all as specified and directed |
| 26 | M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed |
| 27 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed |
| 28 | Removing excavated soil n.exc 50 m and depositing where directed at level n.exc 1.50 m above the starting point complete all as specified and directed. |
| 29 | Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 30 | Demolition of cement concrete of roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work incl tarfelt etc complete all as specified and as directed. |
| 31 | S & F of structural steel work in tubular trusses including special shaped washer etc.. using ERW or induction butt welded tubes conforming to IS-1161-1998 grade St.-240or with holow structural steel sections conforming to IS 4923-1997 Grade St-240 complete all as specified and directed |
| 32 | S & F of mild steel bolts purpose made, diameter of neck exc 20 mm but not exc 25 mm, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long complete all as specified and directed |
| 33 | M&L for rolled sections as in framing for cladding, frame for valley gutter, glazing and the like fixed with angle cleats and connecting plates etc Fe-410-W Grade E-250 Quality.complete all as specified and directed |
| 34 | S&F for compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.Fe-410-W Grade E-250 Quality A.complete all as specified and directed |
| 35 | M&L for 6mm thick X 150mm wide non-asbestos decorative planks (shera planks) fixed to steel members with suitable screws/fasteners/nuts and bolts & washers and applying two coats synthetic enamel paints complete all as specified and directed. Make:- Shera Planks or Equivalent |
| 36 | M & L for cutting chases in PCC block walls for placing the steel etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed |
| 37 | M & Lfor seamless false ceiling made out of 12mm thick of gypsum board fixed to the ceiling section with 25mm long self drillingand tapping screws having Philips head with under head cutter at 200mm centre to centre, including finishing the joints of face board with specially formulated joining compound and 48 mm wide fibre tape to provide seam less finish and including GI channel 0.55 mm thick with two unequal flanges of 20 to 30mm and web of 27 mm fixed to surrounding wall using nylon sleeve and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 215 mm each and web of 45 mm suspended from soffits at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.20mtr length) of 0.55 mm thick having kurled web of 50 mm and flanges of 26 mm each with lips of 10.5 mm fixed to theintermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including 6mm thick GI hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40x3 mm size long and expansion hold fasteners 12.5mm dia 40mm long includingthin layer of Pop with Gypsum binder,sanding the surfaces till smooth surface is obtained and finally applying two coats of acrylic emulsion over one coat primer over 3mm thick putty complete all as specified and directed |
| 38 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises.complete all as specified and directed |
| 39 | Dismantling stone slab or tiles of any description or thickness laid in any mortar as in floors, aprons etc complete all as specified and directed |
| 40 | M & L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) 25mm thick as in levelling course, sub-floors and paving etc complete all as specified and directed |
| 41 | M & L for vitrified tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exc. 1.0 sqm asin floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15 mm thick in cement mortar 1:6, complete all as specified and directed |
| 42 | Ditto all as per item No 41 above but asin skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified and directed |
| 43 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) complete all as specified and directed |
| 44 | M&L for non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointedin white or coloured cement to match including 15mm thick screed bed in CM 1:6 and complete all as specified and directed |
| 45 | All as per item No 44 above, but asin skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified and directed |
| 46 | M&L for glazed ceramic tiles in vertical surface 600X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in CM 1:4 and complete all as specified and as directed. |
| 47 | M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges kitchen plateform etc of rough finished flat surfaces concrete complete all as specified and as directed |
| 48 | M&L for reinforcement cement concrete type B0 (1:2:4) using12.5mm graded crushedstone aggregate as in slabs supported on walls, beams and columns in floorsroofs, landings, balconies canopies, deck slabs and in shelves, kitchen shelfetc complete all as specified and directed |
| 49 | M &L for granite 18-20mm thick (of any type) work table robed & polished cooking platforms and like over 15mm thick screed bed or bedding in layer of CM 1;4 for laying floor finishes incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite, and half moulded at one side including demolition of old stone any type complete all as directed and as specified |
| 50 | Demolition of precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed. |
| 51 | M&L for precast cement concrete solid building blocks or slabs Type C1 1:3:6 (using 20 mm graded crushed stone aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar(1:4), complete all as specified and directed |
| 52 | M & L for cement concrete 1:3:6 type C-1, 75 mm thick using 20mmgraded stone aggregates as in plinth protection finished fair and even with using extra cement.complete all as specified and directed |
| 53 | Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar any description.complete all as specified and directed |
| 54 | M & L for rendering 15mm thick in CM 1:4 on fair faces of brick/concrete finished even and smooth without using extra cement, complete all as specified and as directed. |
| 55 | M&L for rendering in two layer i.e.5 mm thick inCM 1:4 mixed with water proofing compound @3% of the weight of cement used n top layer of 5mm thickness or as per manufacturer\"s instruction over 10mm thick in CM (1:6) on concrete/block masonry surfaces and finished evenand smooth without using extra cement on complete all as specified and directed(Note WPC shall be measured and paid separately under relavant item) |
| 56 | M&Lfor preparation of newly plastered wall surface and applying two coat of oil bound distemper over one coat of cementprimer and over a layer of 3mm avg thick wall care putty including leveling the surface which undulation found with cement putty etc complete all as specified and directed. |
| 57 | M&L for preparation on newly plastered external wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primerof the same manufacturer as that of paint complete all as specified and as directed. |
| 58 | M&L for complete removal of existing treatment on wall by scrapping, washing, cleaning etc and applying two coats of acrylic emulsion distemper over one coat cement primer over one coat of 3mm avg thick wall care putty including filling of cracks, holes and including leveling the surface which undulation found with wall care putty etc. complete all as specified and directed |
| 59 | M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint incl filling cracks, holes using wall care putty complete all as specified and as directed. |
| 60 | Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm Each incl iron mangery complete all as specified and directed |
| 61 | Taking down frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4 Sqm Eachincl iron mangery complete all as specified and directed |
| 62 | S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with galvanised wire staples. compete all as specified an directed. |
| 63 | S & F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification complete all as specified and directed |
| 64 | S & Ffactory made solid PVCmolded with particle board core door shutter 28 to 30 mm thick panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and directed |
| 65 | M & L for pressed steel frames for doors with one or more rebates including necessaryfixing lugs, hinges, lock strike plate etc.complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed |
| 66 | M & L for pressed steel frames for doors with one or more rebates including necessaryfixing lugs, hinges, lock strike plate etc.complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed |
| 67 | M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed |
| 68 | M&L forMild Steel flat ironas in hold fast supplied and fixed including tarring complete all as specified and directed |
| 69 | M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in Coping, gap filling in between roof sheet and wall etc similar work complete all as specified and directed. |
| 70 | M&L for 30 mm thick flush door shutters solid core construction with block board core and both face covered with decorative face venner with lipping/frame to match complete all as specified and directed. |
| 71 | S & F of 2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a), fitted to chowkhats.complete all as specified and directed |
| 72 | M&L for bees-wax polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surface.complete all as specified and directed |
| 73 | S & F powder coated anodised aluminiumframe,three track sliding for windows, fixed/top hung frame for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 74 | Supply and fix in repairs figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane.complete all as specified and directed |
| 75 | S & F of 18 mm thick plywood BWR type fixed with screws with timber frameworkcomplete all as specified and directed. |
| 76 | M & L for 0.9 mm thick colour / white laminates type I or surface finish, colour and pattern fixed to wooden surface with glue complete all as specified and directed . |
| 77 | S & F of 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish orelectro galvanised complete all as specified and directed. |
| 78 | S&F for aluminium anodised 100 mm hasp and staple, safety type, brass with mild steel hing pin incl bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 79 | S&Faluminum anodized barrel bolt of extruded section 125mm long, complete all as specified and directed |
| 80 | M & L for prepartion of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 81 | S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 complete all as specified and directed |
| 82 | S&F of extruded aluminum alloy handle fabricated type anodized 150mm long complete all as specified and directed. |
| 83 | S&F of aluminum anodized barrel bolt of extruded section 150mm long complete all as specified and directed |
| 84 | S&F of magnet catcher for cupboards or wordrobe etc complete all as specified and directed |
| 85 | S&F of stainless steeldrawer channeland ball bearing slidetelescopic channel for kabinet or cupboard complete all as specified and directed |
| 86 | S&F of 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plateetc complete all as specified and directed |
| 87 | S&F for 300mmlong aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and directed |
| 88 | S&F floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and directed |
| 89 | S&F in repairs stainless steel curtain rail, cromium plated with fixing brackets, stops, roller etc complete all as specified and directed. |
| 90 | S&F in repair rotational moulded polyethylene water storage tanks 2000 lts(cylinderical vertical with closed top) hoisted and fixed in position incl taking downold pvc tank complete all as specified and directed |
| 91 | S&F in repair rotational moulded polyethylene water storage tanks 500 lts(cylinderical vertical with closed top) hoisted and fixed in position, including dismantling of old water tank and removing to store all as specified in SSR part 1.complete all as specified and directed |
| 92 | S&F 25mm ball valve high pressure with polythylene float valve and fly nut complete screwed for iron pipe PTMT complete all as specified and directed. |
| 93 | S & F Gun metal globe or gate valve 20mm , with iron wheel head screwed both ends for iron pipe and loud in repairs complete all as specified and directed. |
| 94 | Supply and fixed in repairs vitreous china wash down single piece WC of size 410x720x800mm with softclose seat coverwith \"S\" or \"P\" trap and other connecting items approved brand including fix with white cement complete all as specified and directed. (Make-Jaquar Cat Pt No. VGS-WHT-81751P andVGS-WHT-81201)or equivalent complete all as specified and directed |
| 95 | Supply and fixed in repairs vitreous china WHB white flat back size 630 x 450 mm rectangular shape table topapproved brand incl bottle trap waste fitting complete all as specified and directed.(make- Jaquar/Prayag/Somany ) |
| 96 | S&F in repair CP long body Bib taps fancy typeChromium platedcast copper alloy with crutch or butterfly handle, screwed for iron pipe of dia 15mm, fancy type complete all as specified and as directed. |
| 97 | S&FCPStop valves/angle cock cast copper alloy,fancy type,with long shank and cup,bore15mm, fixed complete all as specified and directed |
| 98 | S&F in repairs PVC connection 15mm dia and 45cm long with two Nosof brass checknuts and washers complete all as specified and directed |
| 99 | Supply and fixed in repairs bevelled edged looking mirror of size not exc 2 Sqmof selected quality glass fixed with stainless steel studs all as specified & directed including taking down existing old unserviceable mirrors complete all as specified and directed |
| 100 | Supply and fixing of soap-dish chromium plated (Approximate size 160x160x90mm) complete all as specified and directed |
| 101 | S & F Brass chromium plated towel rack with lower hanger (stainless steel) with hook. complete all as specified and directed(Make Prayag Cat Part No. BA-12) |
| 102 | S&FBrass chromium plated tubulartowel ring square/round with round flange.complete all as specified and directed (Make Jaquar Cat Part No. ACN- 1121BN) |
| 103 | S&F Sheet glass shelf assembly consisting of 5.5mm thicksheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed |
| 104 | S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 105 | S & F central hole basin mixer with chrome finish (Make: Jaquar/ Prayag/Somany or equivalent) complete all as specified and as directed |
| 106 | S & F of swan neck sink cock tap 15 mm (Make: Jaquar Cat No. CQT 23123 or equivalent make) with silver, chrome finish complete all as specified and directed. |
| 107 | S & F in repairs for wall mixer 3-in-1 system with provision for both hand shower and over head shower composite with 115 mm long bend pipe connecting legs & wall flanges Mixer(Make: Prayag Cat No PIS-80H), hand shower including 1.5 mtr flexible tube with hookCat No BHS-87, and over head showerwith arm and flange(300mm) of cat No BOS-90. or Equivalent make.complete all as specified and directed |
| 108 | S & F kitchen plate rack size (900mmx750mm) made of stainless steel, complete all as directed and as specified |
| 109 | Dismantling of cast iron drain pipe 100 mmdia from floor/walls etc and taking out of trenches/floors complete all as specified and directed. |
| 110 | S&F110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 111 | S&F 110 mm PVC (SWR) bends any radius with access door complete all as specified and directed. |
| 112 | S&F 110 mm PVC (SWR) branch piece, (singal T) equal or unequal with access door complete all as specified and directed |
| 113 | S&F 110 mm PVC (SWR) vent cowl complete all as specified and directed. |
| 114 | S&F 110 mm PVC (SWR) bends any radius with access door complete all as specified and directed. |
| 115 | Dismantling of cast iron drain pipe 75mm dia from floor/walls etc and taking out of trenches/floors complete all as specified and directed. |
| 116 | S&F75 mm PVC (SWR) pipes single socket in any lenth with rubber ring joints fixed to wall complete all as specified and directed. |
| 117 | S & F 75/110mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cementcomplete all as specified and as directed. |
| 118 | S&F 75 mm PVC (SWR) bends any radius with access door complete all as specified and directed. |
| 119 | S&F 75 mm PVC (SWR) branch piece, (double T) equal or unequal with access door complete all as specified and directed. |
| 120 | S&F 32 mm bore CPVC pipes SDR 11 pipes & Plain CPVC SDR 11 fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and as directed |
| 121 | S&F 25 mm bore CPVC pipes SDR 11 pipes & Plain CPVC SDR 11 fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and as directed |
| 122 | S&F in repairs of CPVC pipes 20 mm dya SDR 11 & plian CPVC SDR 11 fittings in wall /ceiling or laying in floors taking down old GI tubes complete all as specified and directed. |
| 123 | M & Lfor reinforced cement concrete (nominal mix) in beams, cantilevers,bressummers, lintels over 1.5m span, type B1 1:2:4 (20mm graded aggregate) complete all as specified and as directed. |
| 124 | M & L for form work to sides and soffits of floors or roof beams, beam haunching, girders, bresummers, lintels cantilevers, shelves including supports overhangs, etc, also splays between floor and beam etc, complete all as specified and directed |
| 125 | M & L for TMT bars 10 mm dia and over and cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9mm dia or securing with clips quality conforming complete all as specified and directed |
| 126 | M & L forTMT bars 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed |
| 127 | M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in 100mm thick as in sub base complete all as specified & directed |
| 128 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand.complete all as specified and directed |
| 129 | Excavation in trenches by mechanical means (Hydraulic excavator) or mannual exc n.exc. 1.5m wide and n.exc. 1.5m in depth for taking up/laying sewer lines and getting out in any kind of soil complete all as specified and directed |
| 130 | Returning, filling in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm complete all as specified and directed |
| 131 | Demolition and breaking up drain pipes 150mm dia ( Salt Glazed ware, AC or reinforced concrete) set in cement mortar including PCC bed and haunching and removal of debris outside the MD land complete all as specified and directed |
| 132 | M&L for salt glazed stoneware pipes grade \"A\",150mm bore,laid in trenches and jointed complete all as specified and directed |
| 133 | M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) for bed to drain pipe 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed |
| 134 | Demolition of reinforced Concrete in any position not otherwise specifically provided for RCC cover slab for manholes etc.complete all as specified and directed |
| 135 | M&L for pre-cast reinforcement cement concrete (1:2:4) Type B-1, using 20 mm graded stone aggregate as in cover slab for manholes etc.and set in cm 1:6.complete all as specified and directed |
| 136 | M&L for Plain cement concrete type C1(1:3:6) ( using 20mm graded stone aggregate) as in surface chanels and drains complete all as specified and directed |
| 137 | M & L for taking down copper/aluminium point wiring (light, fan, socket, power, security lights or bulkhead) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed |
| 138 | Taking down existing unserviceable Distribution boards / AC board with MCB\"s any size and any type complete all as specified and as directed |
| 139 | Material and labour for point wiring concealed type complete all as specified with 1100 Volts grade 1.5 Sqmm PVC insulated FR-LSH unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC rigid conduit medium grade of size minimum 20 mm with all accessories concealed in wall / ceiling including continous earth wire 1.5 Sqmm PVC insulated FR-LS unsheathed 1100 Volts multistranded copper conductor connected to common earth and earth dolly including modular metal flush boxes concealed in walls and modular white plate covers with frame for mounting of modular switches/sockets etc complete including making good of disturbed surfaces of wall / ceiling / floor all complete as specified and directed (a) onelight point/ ceiling /exhaust fan point |
| 140 | (b) One three pin switch socket 6 Amps outlet on independent board. complete all as specified and directed |
| 141 | (c) One three pin switch socket 6 Amps outlet on same board. complete all as specified and directed |
| 142 | All as per item No 139 here in before but with cable 2.5 sqmm multi stranded copper FR-LSH wire , 1100 Volts grade, unsheathed for one 3 pin socket out let 15 amps on independent board including continuous earth wire PVC insulated 2.5 sqmm copper stranded conductor FR-LSH, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified and directed |
| 143 | All as per item No 139 here in before but with cable 4 sqmm multi stranded copper FR-LSH wire , 1100 Volts grade, unsheathed for one 3 pin socket out let 15 amps on independent board including continuous earth wire PVC insulated 4 sqmm copper stranded conductor FR-LSH, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified and directed |
| 144 | Supply and fix Modular switch 1 way 6A , 1-module complete all as specified and directed |
| 145 | Supply and fix Modular switch 1 way 16A with indicator, 1-module complete all as specified and directed |
| 146 | Supply and fix Modular socket, shuttered type, 6A - 3 pin 2 -module complete all as specified and directed |
| 147 | Supply and fix Modular socket, shuttered type, 6/16A -combined 2-module complete all as specified and directed |
| 148 | S & F 3 pin, 6 A, 250 V ceiling rose having terminal capacity 3 X 1.5 mm² IP 20 protection complete all as specified and directed |
| 149 | Supply and fixing ceiling fans complete with blades,copper winding, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery not less than 210 CFM with service value more than equal to (≥)6.00, BEE Five star rated with brushless direct current motor (BLDC) white colour complete all as specified and directedMake:Gold Medal cat part no.SCFS 500748/Bajaj Cat part No:ENERGOS 28/ Crompton Cat part No:ENERGION RIVIRA/Havells Cat part No:PRO 28BLDC/Luker Cat part No:ECO28NEOBLDC Regulator 222cmm |
| 150 | Supply and fix exhaust fan, metal body AC single Phase 230V of size 300 mm sweep,RPM 1200 with, copper winding,blades,rag-bolts, and frame and louvers complete including making suitable size hole in wall for fixing of fan complete all as specified and directedMake: Havells Cat part No:Ventil air DSB/Gold Medal EFS851012 HAVAC PLUS /Crompton drift air plus300mm/Bajaj-Supreme plus/Luker cat part No:TuuliLME12 |
| 151 | Supply and fix exhaust fan made of sturdy Engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm sweep complete all as specified and directedMake:Havells Cat part No:Vetil Air DX HS/Gold Medal EFS850310 AIR MAXX/Crompton VENTILUS250MM/Bajaj-Maxima neo/Luker cat part No:Viento LX10 |
| 152 | Supply & Fix Electric water heater, storage type,vertical, single phase, electric operated, 50Hz, steel body heating element up to 2 KW capacity 25 Ltrs, BEE 5 star ratedinnner tank as per OEM specification with minimum 2 years warranty on over all product (inner tank ,heating element & thermostat)complete with all accessories such as safety valve, thermostate, NRV, connection piece, FRLS multistranded copper conductor cable 3 core PVC insulated, plug top 3 pin 15 Amp , 15 mm dia, brass coupler, flexible pipe suitable to withstand upto 120 °C for hot and cold water, Anchor fastener- 04 Nos of suitable size etc. complete all as specified and as directed |
| 153 | S & F 20 W surface / wall mountedLED batten light fitting aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy not less than 120 Lumen/Watt, rated llife 50000 Burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed Make: Crompton CCS-100-20-65-HSL2-DP-NWH/ PHILIPS BN308CLED20S-6500L120PSUWH / WIPRO LL31-251-XXX-65AL5/ Havells ENDURALINEARPROBS20WLED865PCSSIND/ Bajaj-BCLAB20WCWLEDXT |
| 154 | S & F 10 W surface / wall mounted 2 feet LED batten light fittinginput voltage range 250 V, input frequency 50Hz, efficacy not less than 100 Lumen/Watt rated life 25000 burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed Make:Crompton CCS-103-10-65-SL-DP-NWH/ Havells LHEXAZP7PN1W010 / PHILIPS BN021LED12S 6500K PSU GR / WIPROLL20-111-XXX-65NE3 /Bajaj-BCLAB10WLEDCWLED |
| 155 | Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant,efficacy not less than 120 lm/Watts,rated life 50000 burning hours complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with wall mounting bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete suitable for pop/grid false ceiling complete all as specified and directedMake:Crompton TRP-409-45-57-SL-GL-NSG / PHILIPS BRP030LED35CWSLRGRPSUV1 / HAVELLS ENDURASUNDOWNSL45WLED765PASYBOPC/WIPRO LR22-501-XXX-57-XX/Bajaj-VISTAP45LWHPOPCSD |
| 156 | S & F Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps (AC Box) complete all as specified and directed |
| 157 | S&F of sheet metal enclosure TPN DBs with 200 Amps rated bus bar of 4 way 415 volts with blank plate complete with double door complete all as specified and directed |
| 158 | S & F single pole & neutral, double door, metallic distribution board 8 ways conforming to IEC 61439-3, suitable for flush / surface mounting with provision for DP MCB as incomer and SP MCBs as outgoing, complete all as specified and directed |
| 159 | S&F of MCB single phase and neutral (SPN), 40 Amps, 230 Volts,connecting with lugs, complete all as specified and directed |
| 160 | S&F of MCB SP 6 to 32 Amps \"C\" series complete all specified and directed |
| 161 | S&F of MCB, single pole, 40 Amps, 240 Volts,connecting with copper lugscomplete all as specified and directed |
| 162 | S&F of MCB three phase and neutral (TPN), 100 Amps, 415 Volts,connecting with lugs, complete all as specified and directed |
| 163 | M & L for submain wiring using 3 runs of 6 Sq mm 1100 V grade single core FR-LSH flexible cable conforming to IS 694: 2010, having multi-drawn thin strands of electrolytic copper conductors and insulation for phase, neutral and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in medium grade PVC recessed conduits, conforming to IS 9537 (Part- 3): 1983, of size not less than 25 mm NB, including taking down old submain wire and making good of disturbed surfaces of wall / ceiling / floor all complete as specified and directed |
| 164 | Material and Labour for Earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less\" than 1.5meters below normal ground level, earth plate connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES 2009 (part I Specifications) connected to earth test point all as specified or indicated including testing on completion, including necessary excavation and earth work in any type of soil and adequate quantity of common salt & charcoal for alternate layer around the earth plate, including PCC (1:2:4) pit and 10mm thick C.I. cover with arrangement of hinge to 40x40x6mm C.I. angle iron frame, including 20mm dia G.I. pipe for watering purpose with the arrangement of funel and wire mess, including GI pipe of 15 dia for earth lead protection complete incl taking down old onecomplete all as specified and directed |
| 165 | M&L for earth continuity conductor 4 Sq.mm dia GI or steel wire complete all asspecified and directed. |
