Tender For Repair/ Maintenance Of Toilets Of Jcos/ Or Otm At Laitumkhrah Grn; 2 B&RDismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm 3 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 4 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :Cement mortar 1:3 (1 cement : 3 coarse sand) 5 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand 6 Raking out joints in lime or cement mortar and preparing the surfacefor re-pointing or replastering, including disposal of rubbish to thedumping ground within 50 metres lead. 7 Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. 8 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., completeSize of Tile 600x600 mm 9 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete 10 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at theunctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central crosspiece 11 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid 12 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with S or P trap including dismantling of old WC seat and S or P trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm 13 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. 14 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm 15 Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 16 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.1 450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing not less than 170 gms 17 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes 18 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal dia Pipes 19 Providing and fixing C.P. brass long body bib cock of approved qualityconforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore each 20 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification. Two or more coats on new work 21 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work 22 Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard designWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5 23 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 17.18.1 10 litre capacity - White 24 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : 17.20.1 White solid plastic seat with lid 25 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia 26 Providing and fixing toilet paper holderC.P. brass 27 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter 28 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110mm Coupler 29 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110x110x110 mm 30 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 75 mm bend 31 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.110 mm bend 32 Providing and fixing uplasticised PVC connection pipe with brass unions : 15 mm nominal bore 33 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. (For W.C. and bathroom door shutter). 34 E&MM&L for Wiring for light point/ fan point/ exhaust fan point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in conceled/ surface / recessed PVC conduit or Caping-N-Casingwith and includingmodular switch, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required all as specified and directed(Group C) 35 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required 36 Supplying and fixing of 5/6 Amps modular switch 37 15/16 Amp modular switch 38 3/5 Pin 5/6 Amp modular socket out let 39 6 Pin 15/16 Amp modular socket outlet. 40 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 41 Supplying and fixing fowlloing size/ modules GI box along with modules base & cover plate for modular swithes in recessetc as required. (a) 1 or 2 module (75mmx75mm) 42 (b) 3 modules (100mmx75mm) 43 (c) 4 modules (125mmx75mm) 44 (d) 6 modules (200mmx75mm) 45 (e) 8 modules (125mmx125mm) 46 (e) 12 modules (200mmx150mm) 47 Supplying and fixing 3 pin 5 Amp ceiling rose on the existing junction box/ etc as requied . 48 Earthing with GI earth plate 600mmx600mmx3mm thick including accessorise and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc with charcoal/ coke and salt as required. 49 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required 50 Supplying and fixingPVCbatten / angle holder incl connection as reqd complete all as specified and directed 51 Supply only PVC ventilation fan 200 mm sweep complete all as directed by Engr-in-Charge. 52 Fixing onlyExhaustfan of any sweep/typeincuding making all electric connections complete all as specified anddirected. 53 Supplying and fixing following way single pole and neutral, sheet steel MCB distribution board 12 way, 240 valts on surface/recess complete, with tinned copper bus bar, neutral bus bar, earth bar, din bar,inter connection, powder pointed including earthing etc as requied (But with out MCB/RCCB/Isolater) 54 S&F in replacement of MCB C Curve type, 10 kA, 5 to 32 Amp, Single Pole and neutral with over load and short circuit protection complete all as directed. 55 S&F in replacement of MCB C Curve type, 10 kA, 5 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed. 56 Wiring for circuit/ submain wiring alongwith earth wire with the 2x1.5 sq mm+1x1.5 sq mm earth wire of FRLS PVC insulated copper conductor, single core cable in casing caping as requed.. 57 Wiring for circuit/ submain wiring alongwith earth wire with the 2x2.5 sq mm+1x2.5 sq mm earth wire of FRLS PVC insulated copper conductor, single core cable in casing caping as required. 58 Wiring for circuit/ submain wiring along earth wire with the 2x6 sq mm+1x6 sq mm earth wire of FRLS PVC insulated copper conductor, single core cable in casing caping as required. 59 Supply only LED , Tube light fitting 20 W, 6500K Intenso AX LED batten aluminium profile self ballasted surface mounted LED Batten extruded aluminium body with PC diffuser in unic shape. >180º wide light distribution. soft glare free light complete accessories. 60 Supply only LED 14 Watts(WW) 230 V, with control driver with efficiency 90 % ,attractive type sleek LED mirror light 2 feet fitting with high output diffuser complete al as directed by Engr-in-Charge. 61 Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. 62 Repair and replacement of Street light 50 Watts white/warm White as per site requirement 63 Fixing onlypre-wired light fittings of LED of 18W flurecent/compact fluoverscent fittingwith all accessorieson ceiling/wall including connetion with 1.5 sqmm FRLS PVC insulated, copper inductor, single core cable and earthing etc as required all as specified and directed. 64 Supply only of LT UG Cable PVC Shethed XLPE Cable 25 Sqmm 3.5 Core 65 Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required 66 Supply and installation ofElectric storage water heater (Geyser) 25Ltr Capacity. BEE Star Rated . Note : Including old taking down and new installation with fixing accessories such as connection pipe Hot and Cold water line, fixing fasteners nut&boltcomplete all as directed by Engr-In-Charge) 67 Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in Open/, Wall/ ground including excavation, sand cushioning, protective covering and refilling the trench above 35 Sqmmupto 95Sqmm complete all as specified and Directed by Engr-In-Charge.Note: As Per Site Condition laying of Cable Open/Wall/Trench 68 Supply & fix Bus bar Panel, Size:0.8x0.4x0.4 Mtr,Kisokoutdoor type, CPRI type tested, LT 440 Volts, 50 Hz , 3 Phase4 wire supply , floor mounted factory fabricated weather and vermin proof protection class IP 54 made out of 3.14 mm thick MS Sheet CRCA on angle iron 30X30X4mm frame of size suitable to incorporate following accessories with both side opening doors,locking arrangementpowder coated internally and externally, shall have channel base of appropriate size and mounted on PCC foundation of size as required or approved by manufacturers in PCC 1:3:6 typeC-2 , using 40 mm graded crushed stone aggregate as recommended by manufacturer or directed by the Engr -in - charge including earth work complete comprising of Bus bar chamber comprising 4 Nos Aluminium strip bus bars PVC insulated made of aluminium strip of size suitable for 250A current & 4 ways. PVC sheathed with colour coding incl 200 Amps 4 Pole MCCB and all as specified and directed by Engr-In-Charge. 69 SCHEDULE ‘A’ PART-II (SCHEDULE OF CREDIT) 70 Old U/S point wiring including switches(Rate should be quoted Rs 10.00 per point or more) 71 Old unserviceable earthing materialsof any size/capacity(Rate should be quoted Rs 65.00 each or more) 72 Old unserviceable Distrubution Board of any size/capacity(Rate should be quoted Rs25.00 each or more) 73 Old unserviceableMCBsof any size/capacity(Rate should be quoted Rs 5.00each more) 74 Old unserviceable light fittingof any size/capacity(Rate should be quoted Rs 5.00each more) 75 Old unserviceable Sub Main wiring of any size/capacity(Rate should be quoted Rs 8.00per RMmore) 76 Old unsv UG cable of any size and capcity (Rate should be quoted Rs 15.00per RMmore)
