|
| 1 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity, including the cost of hire charges of mechanical grinder, diesel operated electrical generator set, suitable for supplying power for the grinder for cutting, cost of grinding blades , skilled work force, fuel. Etc. required for completion of job as per the direction of Engineer- in -charge |
| 2 | Dia in mm |
| 3 | a) 150mm dia |
| 4 | b) 300mm dia |
| 5 | c) 450mm dia |
| 6 | d) 500mm dia |
| 7 | Dismantling and removal of double flange following size butterfly valve with required tools and tackles and stacking it in departmental store at Curti. |
| 8 | a) 150 mm |
| 9 | b) 300 mm |
| 10 | c) 450 mm |
| 11 | d) 500mm |
| 12 | Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. generally conforming to BS EN 593, cone sphere eccentric design, double flanged butterfly valve having body, disc and end cover in graded cast iron to IS:210 Gr. FG 260, synthetic rubber face ring secured on disc by a SS retaining ring with stainless steel screws, the rubber ring seating on a corresponding integral Model 60 / SS 316 seat in body, stub shaft of AISI 431 riding in Teflon bearings, flanges drilled to IS:1538 Table 4 & 6. TYPE P.N. 1.0 (Class A) |
| 13 | Dia in mm |
| 14 | a) 150mm dia |
| 15 | Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. IVC/Kirloskar/Fouress brand generally conforming to BS EN 593, Cone sphere eccentric design, double flanged butterfly valve having body, disc and end cover in graded ductile iron to I.S :1865 gr. 400/15 or 500/7, synthetic rubber face ring secured on disc by a SS retaining ring with stainless steel screws,the rubber ring seating on a corresponding integral Monel 60 seat in body, stub shaft of AISI 431 RIDING IN TEFLON BEARINGS, FLANGES DRILLED TO IS:1538 Table 4&6.TYPE P.N.1.0 (Class A). |
| 16 | Dia in mm |
| 17 | a) 300mm dia |
| 18 | b) 450mm dia |
| 19 | c) 500mm dia |
| 20 | Supplying cast iron fittings as per IS : 1538 -1993 including sealing rubber gasket (NR) CI Compression glands and coated MS Nuts bolts. |
| 21 | I) Flanged Socket Tail piece ( Flanged Adaptors) |
| 22 | Nominal Dia in mm |
| 23 | a) 150mm dia |
| 24 | b) 300mm dia |
| 25 | c) 450mm dia |
| 26 | d) 500mm dia |
| 27 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I |
| 28 | Nominal Dia in mm |
| 29 | a) 150mm dia |
| 30 | b) 300mm dia |
| 31 | c) 450mm dia |
| 32 | d) 500mm dia |
| 33 | Supply, installation, testing and Commissioning of motorized valve actuator for existing manual operated Butterfly valve. The actuator shall consist of 3 phase, 415V A.C. electric motor of suitable capacity with gear box unit as per requirement. Facility for manual override with hand wheel and clutch mechanism, open close indicator (local), suitable operating torque speed and other parameters at site with required limit switches 2No + 2NC contacts. Motor shall be S2 duty with class F insulation, IP 68 protection for following valves and SCADA compatible. Make: Auma/Rotork/Cair Automation |
| 34 | a) Butterfly valve of size 500mm, PN 10 |
| 35 | b) Butterfly valve of size 450mm, PN 10 |
| 36 | c) Butterfly valve of size 300mm, PN 10 |
| 37 | d) Butterfly valve of size 150mm, PN 10 |
| 38 | Design supply, Installation, testing and commissioning of free standing control panel for valve actuators with 14 SWG guage, openable from front with hinged door, powder coated and shall comprise of following. Incomer : 4 pole, MCB of suitable rating (considering actuator load of 2 No’s of 500mm Butterfly valve, 2nos.of 450mm butterfly valve, 2 nos. of 300mm Butterfly valve and 2 nos. of 150mm butterfly valve of phase indicator, Ammeter with selector switch and current transformer, voltmeter with selector switch. Outgoing feeders (8 nos.) Each consisting of forward reverse starters, with individual required MCB for power and control circuit, Indicators for ON, open, closed, fault/trip, opening/closing operations, overload relay, required connections, push button for open, stop, close commands and shall suitable for SCADA operations. |
| 39 | Make: Starter/Contactor: L & T / siemens |
| 40 | Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I), IS:7098(Part I) with latest amendments of following size. |
| 41 | a) 4 Core 10 sq.mm |
| 42 | Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I), IS:7098(Part I) with latest amendments of following size. |
| 43 | 1) 3 Core 2.5 sq.mm |
| 44 | Supply of 10 core, 1 sq.mm, 1.1 KV grade copper armoured cable |
| 45 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required |
| 46 | Supplying and making cable end terminations with brass compression gland and copper lugs for following sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. |
| 47 | 1) 4 x 10 Sq. mm. |
| 48 | Supplying and making cable end terminations with brass compression gland and copper lugs for following sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. |
| 49 | 1) 3 x 1.5/2.5 Sq. mm. |
| 50 | 200 mm width X 50 mm depth X 1.6 mm thick Please Enable Macros to View BoQ information |
