|
| 1 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings . |
| 2 | Demolition cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level). |
| 3 | Demolition cement concrete is reinforced (reinforcement cut as required to facilitate demolition)Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work , |
| 4 | Demolition Brickwork or stone/ boulder masonry built in cement mortar or cement lime mortarincluding all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles . |
| 5 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out-soft/ loose soil . |
| 6 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out-soft/ loose soil |
| 7 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm |
| 8 | Cement concrete in Foundation filling and mass concrete Type D2 1:4:8 ( 40 mm graded aggregate ) |
| 9 | Brickwork with subclass \"B\" bricks , straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 . |
| 10 | Providing, cement concrete in , copings, type B0 1:2:4(12.5 mm graded aggregate) |
| 11 | Rendering 12 mm thick cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) |
| 12 | Cement concrete in surface channel and drain concrete cement type B2 1:2:4 (40 mm graded aggregate) |
| 13 | Supplying and laying of 15 mm Tubes, \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laidin floors . |
| 14 | S & F Bib taps,long /small body 15 mm bore dia of pipe cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fancy type chromium platedand fixed Make Jaquar/Kerovit/Hindware |
| 15 | S & F 110mm PVC (SWR)bend any radius provided with access door |
| 16 | S & F , Vitreous Cliina wash basin, white, flat back, size 580x450irunexcluding taps, waste, chain and plug and porcelain stopper but including bracketsincluding cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipecomplete in all respect Make:- Jaquar/Kerovit/Hindware modle-2034/305 |
| 17 | S& F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and fluse pipe ) complete including provision of lime concrete bedding &flush pipe to PVC (SWR) \"P’ trap.Make parryware/Hindware/Kerovit |
| 18 | S & F Vitreous China Urinal, Half stall type, white , includung flush pipe and waste pipe,Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe.complete in all respect.including syphonic action type flushing cistern. |
| 19 | S&F, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets 10 litter , flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern.Make parryware/Hindware/Kerovit |
| 20 | S & F EWC Single (One peice ) Vitreous China wash down water closet pan (pedestal pattern),including chromium plated jet spry ref. modle-3027 make :-Jaquar/Kerovit/Hindware |
| 21 | S & F Brass CP Angle- cockwaterscrewed down for iron pipe and fixed Make : Jaquar/Kerovit/Hindware |
| 22 | S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specifiedMake Jaquar/Kerovit/Hindware |
| 23 | S & F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms ) |
| 24 | PVC connections 15mm size with PTMT nuts of length 450mm |
| 25 | S& F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm |
| 26 | S&F, PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls , Bore in 75mm. |
| 27 | S & F 110mm PVC (SWR)bend . |
| 28 | M & L 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement |
| 29 | S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer. |
| 30 | Taking downchowkhats or frames with shutters(without taking off shutters from the frames)exc. 1.5 sq. m but nexc 4.0sq.m each . |
| 31 | Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames ) |
| 32 | S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates made with Fe 410 W (Gde-E 250 quality-A) |
| 33 | S & FFramed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 34 | S &F 1.00 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required but in hearths; covering to door shutters; covering to door chowkats (frames); |
| 35 | S&F, Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,Valley gutter fixed with self tapping screws as specified. Make:TATA/JINDAL/JSW |
| 36 | S&F, Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ridges/valley gutter cladding to wall, fixed with self tapping screws as specified. Make:TATA/JINDAL/JSW |
| 37 | S & F 150 mmPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallson stack clamp made out of MS flat 50 mm x 5 mm for down take of rain water pipes including all fittings, heads, shoes, bends, swan-necks, etc.. |
| 38 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded |
| 39 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded |
| 40 | S&F, Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 |
| 41 | Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, 3 mm thick |
| 42 | S&F,Wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples, Size of mesh12 mm . |
| 43 | Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed 100mm |
| 44 | Preparation of new surface or previously untreated surface and applying two coat synthetic enamel paint (ordinary tint) over one coat of red oxide, zinc chrome primer on steel and iron surface of any description, over 10 cm in width or girth, not otherwise described. |
| 45 | Preparation of new surface or previously untreated surface and applying two coat synthetic enamel paint (ordinary tint) over one coat of red oxide, zinc chrome primer on steel and iron surface of any description, over nexc 10 cm in width or girth, not otherwise described. |
| 46 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 47 | M & L Vitrified Ceramic tiles light shade 8 mm to10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 48 | Glazed ceramic Coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm /450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles. |
| 49 | Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 50 | Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes, cement plaster 1:4 |
| 51 | M & L 75mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) |
| 52 | M & L 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) |
| 53 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. including: stainless steel butt hinges and necessary S.S screws . |
| 54 | Aluminium anodised, barrel tower bolts of extruded section and fixed 150 mm Length of bolt |
| 55 | Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm length of bolt |
| 56 | S&F Aluminium handles, cast type, anodised, size of handle 150mm |
| 57 | S & F PVC (SWR) vent cowl 75mm |
| 58 | Preparing oldsurfaces plastered or unplastered and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work/old (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Make:- Water proof paint Apex (Ultima) Asian/Dulux weathermax/Nerolac |
| 59 | Preparing newsurfaces plastered or unplastered andapplying two coatof oil emulsionon wall and ceiling, white or tinted make: Asian ( Tractor emulsion) /Nerolac/ICI Dulux. |
| 60 | 3mm thick wall care putty on wall & ceiling make JK/BIRLA WHITE CARE/ASIAN/JK LAKHMI |
| 61 | Cutting holes in brick walls in cement mortar or cement lime mortar and stone walls buit in lime mortar, for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, exc half brick but n exc one brick of embeded portion of holdfasts or lugs. |
| 62 | Removing building materials etc. to a distance up to100 metres or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination. |
| 63 | Rotational moulded polyethylene water storage tanks 6 Layer white colour (cylindrical vertical with closed top)with threaded lid ,monkey protector nail on the lid, hoisted and fixed in position all as specified in SSR Part I CAPICITY 1000 LTR including float valve ,ball volve complete in all respectMake Sintex/Vectus/Plasto/Himgiri |
| 64 | Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members Weight per square metre N exc 4 kg . |
| 65 | Tubes, \"mediumgrade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors 20 mm Fixing only. |
| 66 | M & L 14 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including molding on edges |
| 67 | M & L Non asbestos fibre cement building boards 4 mm thick fixed or laid/ inserted to timber/GI/Aluminium framework with screwsfixed in ceiling flat or sloping |
| 68 | S & F Size of grid 605 x 605mm Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equalflanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 69 | Reinforced cement concrete (nominal mix) in :- Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like TypeB0 1:2:4 (12.5mm graded aggregate) |
| 70 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips TMT bar. |
| 71 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), for flat fair finished surfaces of concrete |
| 72 | Finishing cement concrete surface even and smooth Without using extra cement |
| 73 | Glass dividing strips, 3 mm thick 28mm width of strip inserted in position, conform to design |
| 74 | Credit (-) old/unserviceable dismentled steel window frames/grills |
| 75 | Credit (-) old/unserviceable dismentled Doors with door frames |
| 76 | Supply and fixing (S&F) double door sheet metal enclosure when MCBs to be used Triple pole and neutral 4 way 415V with 200 amps rated bus bar Make Havells/Legrand/Polycab. |
| 77 | M&L of point wiring of One light point or one fan / Exhust fan point controlled by one switch with 1.5 sq mm single core FRLS PVC insulated unsheathed Cable, multi stranded copper conductor,(Make-Kalinga/Plaza/Anchor /Havells only, IS: 694-1992 marked).connected with suitable size of copper lugs-ring tong or bottle type end connector and drawn through and including non rigid PVC concealed conduit 25 mm dia or higher complete all PVC conduit accessories such as socket, elbow, junction box bell mouthreducer bend and flexible conduit fittings etc of PCG/Plaza/Anchor/Vimco/Polycab make, and pipe hooks/saddles, ISI markedincluding 1.0sq mm multi stranded copper conductor PVC insulated green in colorof Kalinga/ Plaza/ Anchor/ Havells make and IS: 694-1992 marked only) as continuous earth conductor connectto common earth and earth dolly with all accessories complete all as specified and directed. |
| 78 | Supply and fixing (S&F) double door sheet metal enclosure when MCBs to be used single pole and neutral 8 way 240V with 200 amps rated bus bar Make Havells/Legrand/Polycab. |
| 79 | M&L one three pin socket outlet 5 amps on the same board with other switches, with stranded copper cond.PVC sheathed cables 1.5 sq. mm size. Make- Wire-Finolex /Anchor / RR only. Make- Pipe- Kalinga / Polycab / Plaza only.(Note: The rate include any length of wire required from DB to switch board and light point , fan point with additional length reqd for connecting up to holder/ ceiling rose etc.) |
| 80 | S&F wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable in surfase /recessed as required 2X6sq.mm+1X6.0 sq.mm earth wire in PVC conduit.Make- Pipe- Kalinga / Polycab / Plaza only. Make Wire-Havells /Polycab /RR. |
| 81 | S&F wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable in surfase /recessed as required 4X6sq.mm+1x6.0 sq.mm earth wire in PVC conduit.Make- Pipe- Kalinga / Polycab / Plaza only. Make Wire-Havells /Polycab /RR. |
| 82 | S&F wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable in surfase /recessed as required 2X4sq.mm+1X4 sq.mm earth wire in PVC conduit.Make- Pipe- Kalinga / Polycab / Plaza only. Make Wire-Havells /Polycab /RR. |
| 83 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, exceeding 10 cm girth but not exc 20 cm |
| 84 | S&F Switch piano, flush type single pole, one way 5 Amp Make:Anchor/Havells / Legrands. |
| 85 | S&F Socket outlet 3 pin, 5A, flush type Make:Anchor/Havells / Legrands. |
| 86 | S&F Switch piano, flush type single pole, one way 15 Amp Make:Anchor/Havells / Legrands. |
| 87 | Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type Make:Anchor/Havells / Legrands. |
| 88 | M& L Ceiling rose, 3 phase/PVC/polycarbonate, isolated body. |
| 89 | M&L PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size350 mm x 300 mm and 50 mm deep. |
| 90 | S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. Make:Anchor/Havells / Legrands. |
| 91 | M&L PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size200 x 150 mm and 50 mm deep. |
| 92 | Supply and fixing (S&F) Single door sheet metal enclosure when MCBs to be used2way 240V without rated bus bar. |
| 93 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following Single pole & Neutral (SPN) and 5-32 amp current carrying capacity in the MCB DB complete with connection testing and commissioning Make:Anchor/Havells / Legrands. |
| 94 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following Single pole(SP) and 5-32 amp current carrying capacity in the MCB DB complete with connection testing and commissioning Make:Anchor/Havells / Legrands. |
| 95 | Supply and fixing 415V 10KA \"C\" curve miniature circuit breaker (MCB) TPN 40 To 100 AMP current carrying capacity in the DB complete with connection testing and commissioning Make:Anchor/ Havells / Legrands. |
| 96 | Cutting holes into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required Exc. 150 sq. cm but n exc 400 sq. cm. |
| 97 | Cutting holes into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required Exc. 400 sq. cm but n exc 0.1 sq. m. |
| 98 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers 5 star rating energy efficient(sample may got approved)Make-Bajaj, havells, crompton. |
| 99 | Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitxure and fitting such as switches, ceiling roses, pendent, regulator, sockets, light fitting etc. to bemeasured separately, removing materials to store for keepingin safecustody or for re Use,it also includes re-connection of the old fan which are hanging on their old position and removal of old DB\"s,MCBs and other dismentalling as per site requirement.and making good disturbed surfases of walls,floors,etc.( removal of old Sheet metal enclosures of main DBs are also include.) |
| 100 | Supply & FixingLED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed / surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 101 | Supply and fixing LED lights fitting 1x22, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete Make Havells / Crompton / Philips. |
| 102 | Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 |
