Tender For Repair /Replacement Of Door, Window, Paneling And Flase Ceiling Works At Omq Area Under Ge (Af) Srinagar.; 1 Taking down and refixing of shuttersin same openingafter easing and adjusting of any description exc 1 Sqm and n exc 2 Sqm each including resecuring/changing of builders hardware, complete all as specified and directed. 2 Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 Sqm and credited to the contractor, complete all as specified and directedNote: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. 3 Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n exc 4.0 Sqm and credited to the contractor, complete all as specified and directedNote: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. 4 Taking down shutters of any description size of shutter exc 1 Sqm but n.exc 2 Sqm and removing from site complete all as specified and directed. 5 S&F pressed steel frame for doors with one rebates size of frame 125x60 mm including necessary fixing lungs hinges lock strike plate etc. including PCC, 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in back filling of pressed steel frame, complete all as specified and directed. 6 S&F pressed steel frame for doors with one rebates size of frame 105x60 mm including necessary fixing lungs hinges lock strike plate etc. including PCC, 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in back filling of pressed steel frame, complete all as specified and directed. 7 S&F 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, complete all as specified and directed . 8 M&L for plain cement concrete, 1:2:4, Type B-1 (20mm graded crushed stone aggregate) as in hold fast blocks rungs etc. including necessary formwork, complete all as specified and directed. 9 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening, complete all as specified and directed. 10 S&F 30mm thick Factory made Solid Panel PVC Door Shutter (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed. 11 S&F 30mm thick 2nd class softwood plain framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board with commercial face veneers, complete all as specified and directed. 12 S&F 30mm thick 2nd class hardwood, factory made, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), complete all as specified and directed. 13 Preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. 14 S&F 75mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed.. 15 S&F 150mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed. 16 S&F 150mm size Aluminium handles, cast type, anodised, complete all as specified and directed. 17 S&F 125mm size Aluminium handles, cast type, anodised, complete all as specified and directed. 18 S&F 125mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed. 19 S&F door strip comprising of aluminium holds & rubber strip fixed at bottom of door shutter with screws, complete all as specified and directed. 20 S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed. 21 S&F in repairs 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed. 22 S&F 140mm floor door stopper of aluminium body and tongue anodised with land drawn steel spring overall length of cover plate, fixed with screws, complete all as specified and directed. 23 S&F in repairs 140mm floor door stopper of aluminium body and tongue anodised with land drawn steel spring overall length of cover plate, fixed with screws, complete all as specified and directed. 24 S&F 300mm mild steel ordinary rat tail pattern springs for door including rollers and roller plate, complete all as specified and directed. 25 S&Fin repairs 300mm mild steel ordinary rat tail pattern springs for door including rollers and roller plate, complete all as specified and directed. 26 S&F mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 in steel / wooden shutter of door & windows, complete all as specified and directed. 27 S&F in repairs mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 in steel / wooden shutter of door & windows, complete all as specified and directed. 28 S&F aluminium powder coated aluminium window having three track (minimum thickness of powder coating 50 micron) with aluminium section 92mm X 31.75mm (Weight bottom section 1.070 kg/m, top section 0.933 kg/m, shutter section 40mm X 18mm (weight of handle section 0.417 kg/m) interlock 0.547 kg/rm mounted on bearing to slide on tracks plain anodized in approved shade including supply andfixing of 5mm thick sun / heat reflected glass and wire mesh, PVC track gasket, EPDM rubber gasket on glass of weather tightening along with locks, handle including sealing gap with marble surfaces with silicon sealants making it water proof in all manner etc. complete all as specified and directed. 29 S&F for powder coated aluminium grill (Thickness or powder coating not less than 50 micron) of approved design / pattern, with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coated aluminium standard section around the opening, complete all as specified and directed. 30 S&F Box type steel window double frame (glazed & gauged) made of ERW tube P- section of size 60mm x 25mm double rebated outer frame comprise glazed Skelton shutter door frame of ERW tube P-section size 50mm x 20mm with two Nos openable leaf consisting of two Nos of sash bar of T-sec 20mm x 3mm welded to frame with one No vertical mullion of ERW of ERW box type T-section size of 60mm x25mm FI 2mm thick welded / screwed to frame for fixing of wire gauge/glass and 10mm Sqr Bar security grill including fixture and fitting like as handle, tower bolt stopper , cleat, pintail hinges, holdfast primer etc.including taking down old window, complete all as specified and directed.(Note- sheet glass, wire mess will be measured and paid separately and window will be measured one side only) 31 &F aluminium powder coated aluminium Door / Partitions having(minimum thickness of powder coating 50 micron) with aluminium section 92mm X 31.75mm (Weight bottom section 1.070 kg/m, top section 0.933 kg/m, shutter section 40mm X 18mm (weight of handle section 0.417 kg/m) interlock 0.547 kg/RM mounted on bearing to slide on tracks plain anodized in approved shade including supply andfixing of 5.5mm thick Plain / Frosted / glass, ACP / HPL sheet and wire mesh, PVC track gasket, EPDM rubber gasket on glass of weather tightening along with locks, handle including sealing gap with marble surfaces with silicon sealants making it water proof in all manner etc., complete all as specified and directed. 32 S&F aluminium powder coated ventilator (minimum thickness of powder coating 50 micron) having fixed glass with aluminium section having section 50.80mm x 25.40mm (weight 0.489 kg/m) glazing clear section (weight 0.109 kg/m) with plain anodized including supply and fixing of 5mm thick sun / heat reflected glass making frame and glass water tightening making it good etc., complete all as specified and directed. 33 S&F UPVC windows with, glass 5mm thick clear tough + 12mm thick A, G+5mm clear toughened, Profile-Mozart Premium, colour-white, Drainage, Face, Reinforcement standard, T-joints, Mechanical /V-welded, Bead-Default, Mesh-Pull down, Handle type Cocksper handle, Complete all as specified and directed. 34 S&F in repairs aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and directed. 35 S&F anodised Aluminium snap gridframe work of size 605 x 605mm for seamless ceiling, andhangers 6 mm dia G.I. ( Upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. Flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete and including supply and fixing 12mm thick Gypsum Board (water proof) fixed with screw or as per manufacturers instructions and jointing and finishing to a flush finish of tapered and square edges other board any other joints with recommended jointing compound over jointing tapes, finishing with one coat of primer and two coats of oil emulsion distemper over a coat 1mm thick wall care putty including taking down existing ceiling, complete all as specified and directed. 36 S&F Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 45 mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including taking down existing ceiling, complete all as specified and directed. 37 S&F 12mm thick gypsum board in ceiling fixed with screw of size 600x600mm as per manufacturers instructions including necessary jointing and taping and applying 1mm thick putty to receive finishes, complete all as specified and directed. 38 S&F in repairs 12mm thick wooden wall panelling of second class softwood with tongue and groove joint fixed in any position over and including wooden framework in second class softwood with plain fillets square or sectional area exc 13 Sqcm and n exc 25 Sqcm at n exc 90 cm centre to centre in both direction and including two or more coats of French polishing on all the exposed surfaces wooden panellingincluding taking down existing electrical fittings and re-fixing the same, complete all as specified and directed. 39 S&F in repairs solid PVC wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specifications,complete all as specified and directed. 40 S&F in repairs 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work, complete all as specified and directed. 41 S&F for in repairs 20mm thick wooden planks of second class hard wood, planed one side and edges tongued and grooved or rebated fixed, repairs to replace old and or decayedboarding in patches including cutting out old, piecing, heading joints, complete all as specified and directed. 42 M&L for French polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on old wooden works with one or more coats, complete all as specified and directed. 43 M&L for wooden laminated flooring in strips of size 120cm long and 20cm wide and 6-8 mm thick, fixed with PVC sheet and cushion, complete all as per manufacturers instructions including dismantling of existing flooring, complete all as specified and directed. 44 S&F in repairs 20mm dia stainless steel drapery curtain rods including brackets, end finials (Latoo), for curtain rails fancy decorative type and fix with brass screws to walls approved quality etc., complete all as specified and directed. 45 S&F 3mm thick sheet glass ordinary quality and glazing with oil putty / wooden beading in squares not exceeding 0.50 Sqm, complete all as specified and directed. 46 S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling of existing AC sheet, complete all as specified and directed. 47 S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling of existing AC sheet, complete all as specified and directed. 48 Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. 49 M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and finishing even and smooth without using extra cement, complete all as specified and directed. 50 M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 and finishing even and smooth without using extra cement, complete all as specified and directed. 51 Preparation of newly plastered wall surfaces by using necessary filling compound of Altek/Birla white 1mm thick wall careputty to obtain smooth / even surface using sand paper and applying two coats of oil bound diameter over a coat of primer, complete all as specified and directed. 52 Preparation of new surface of wall and applying two coats of cement based paint over one coat of primer including scaffolding up to 15m height, complete all as specified and directed. 53 Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed. 54 Complete removal of existing treatment of walls and applying 1mm thick wall care putty and prepare the smooth surface with sand paper and applying two coats of distemper oil emulsion paint, complete all as specified and directed. 55 Preparation of old painted steel & iron surfaces of any description over 10cm width or girth and applying One coat synthetic enamel paint, complete all as specified and directed. 56 Preparation of old painted wood surfaces and wood based materials of any description over 10cm width or girth and applying one coat synthetic enamel paint, complete all as specified and directed. 57 Deduction to be made from BOQ for Schedule A Part-II (Credit Schedule from dismantling / taking down items) worth Rs 89,765.00 during AOC. (Note :- Tenderers shall not quote for this Schedule)
