|
| 1 | Note :- 1. The work is meant for day to day maintenance based on complaints . The complaints are required to be attended / cleared on the same day of the reporting. However in exceptional case, if any complaint could not be attended on the same day,the same will be cleared within 48 hours of the reporting. If contractor fails to attend / clear the complaint within 48 hours, a penalty of Rs. 100/- per complaint per day will be imposed till the completion of complaint and recovery amount will be deducted from the RAR submitted by contractor.The T&P required shall be arranged by the contractor.2. The contractor shall be provided with space for setting up maintenance cell at the specified location as per the directions of Engineer-in-Charge.The maintenance cell shall be manned by the contractor\"s supervisor responsible for collecting complaints from the concerned JE/AGE. A proper record of complaints will be maintained by the concerned JE duly signed by contractor.3. The quoted rate ofminor material like screws,nuts, insulating tape ,copper wire of different sizes upto 01 meter length required in the items of BoQ is deemed to be included in therespective item. |
| 2 | S&F in replacementswitch piano, flush type, single pole, one way, 6 Amps, 240 Vcomplete all as specified and directed |
| 3 | S&F in replacementbell push, flush type, 6 Amps, 240 Vcomplete all as specified and directed |
| 4 | S&F in replacementbuzzer ding dong, 240 Vcomplete all as specified and directed |
| 5 | S&F in replacementsocket outlet, two-in-one, 3 pin,6 Amp, flush type,230 volts, AC supplycomplete all as specified and directed |
| 6 | S&F in replacementswitch socket combination, two-in-one, 3 pin,6 Amp, flush type,230 volts, AC supplycomplete all as specified and directed |
| 7 | S&F in replacementswitch piano, flush type, single pole, one way, 16 Amps, 240 Vcomplete all as specified and directed |
| 8 | S&F in replacementsocket outlet, two-in-one, 3 pin,6 & 16 Amp, flush type,230 volts, AC supplycomplete all as specified and directed |
| 9 | S&F in replacementswitch socket combination,five-in-one, 3 pin,6& 16 Amp, flush type,230 volts, AC supplycomplete all as specified and directed |
| 10 | S&F in replacement stepped type electronic fan regulator, flush type,single phase, AC supply, 230 V complete all as specified and directed |
| 11 | S&F in replacementmodular type switch, one way, 6 Amps ,1 modulecomplete all as specified and directed. |
| 12 | S&F in replacement modular type socket,6 Amps, 2/3 pin combined 2 modulecomplete all as specified and directed |
| 13 | S&F in replacement modular type socket,6A/16 Amps, 2/3 pin combined 2 modulecomplete all as specified and directed |
| 14 | S&F in replacementmodular type switch, one way ,16 Amps ,1 modulecomplete all as specified and directed |
| 15 | S&F in replacement PVC plug top, 6 Amp,3 pin with easy grip, white, matt finish complete all as specifed and directed. |
| 16 | S&F in replacement PVC plug top, 15/16 Amp,3 pin with easy grip, white, matt finish complete all as specifed and directed. |
| 17 | S&F in replacement mettalic plug top, 16 Amp,3 pin with easy grip, white, matt finish complete all as specifed and directed. |
| 18 | S&F in replacementfan capacitor 2.15 mfd to 2.5 mfdcomplete all as specifed and directed. |
| 19 | M&L in replacementmodular sheet cover plate with frame of size 8-12 module including necessary electrical connections as per existing point wiring complete all as specifed and directed. |
| 20 | M&L in replacementmodular sheet cover plate with frame of size6 module including necessary electrical connections as per existing point wiring complete all as specifed and directed. |
| 21 | M&L in replacementmodular sheet cover plate with frame of size3 module including necessary electrical connections as per existing point wiring complete all as specifed and directed. |
| 22 | M&L in replacementGI/pressed steel terminal switch board of size 8-12 moduleincluding necessary electrical connections as per existing point wiring complete all as specifed and directed. |
| 23 | M&L in replacementGI/pressed steel terminal switch board of size 4-6 moduleincluding necessary electrical connections as per existing point wiring complete all as specifed and directed. |
| 24 | M&L in replacementGI/pressed steel terminal switch board of size 1-3 moduleincluding necessary electrical connections as per existing point wiring complete all as specifed and directed. |
| 25 | Taking down carefully existing aluminium/copper point wiringfor light, fan, socket or power bell complete with fittings such as Switches, sockets, ceiling roses, holders, call bells etc & making goodthe disturbed surfaces of walls/ceiling, matching the colour with existing surface complete all as specified and directed.Note : Rate for making good shall be deemed to be included in above item rate. |
| 26 | Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLSH with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc including PVC rigid concealed conduit ,medium grade,of suitable size with all accessories such as bend, reducers, MS hooks including galvanised/pressed steelmoduar terminal boxes of suitable size and white cover plate with frame as per relevant ISfor mounting modular switches, sockets, fan regulators etc including continuous earth wire of size 1.5 Sqmm PVC FRLSH stranded copper conductor unsheathed, insulated, strandedconnected to common earthpoint dolly for one light point/fan point/call bell point, 230 voltscontrolled by one switch complete all as specified and directed . Note:- Proper colour coding is to be followed as per IS specifications. |
| 27 | All as per Srl item No 26here-in-before but for onesocket outlet, 3 Pin 5 Amps, 230 Volts on independent board complete all as specified and directed |
| 28 | All as per Srl item No.26here-in-before but for one three pin socket outlet 5 Amp on the same board with other switches complete all as specified and directed |
| 29 | All as per Srl item No 26here-in-before but for onesocket outlet, 3 Pin 5 Amps, 230 Volts on independent board but below the switch board of light points in same vertical plane complete all as specified and directed |
| 30 | All as per Srl item No 26 here-in-before but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire complete all as specified and directed |
| 31 | Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLSH with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc existing PVC/steel rigid conduit including galvanised/pressed steelmoduar terminal boxes of suitable size and white cover plate with frame as per relevant ISfor mounting modular switches, sockets, fan regulators etc including continuous earth wire of size 1.5 Sqmm PVC FRLSH stranded copper conductor unsheathed, insulated, strandedconnected to common earthpoint dolly for one light point/fan point/call bell point, 230 voltscontrolled by one switch complete all as specified and directed . Note:- Proper colour coding is to be followed as per IS specifications. |
| 32 | All as per Srl item No.31here-in-before but for one light point controlled by two,two way switch complete all as specified and directed |
| 33 | All as per Srl item No 31.here-in-before but for onesocket outlet, 3 Pin 5 Amps, 230 Volts on independent board complete all as specified and directed |
| 34 | All as per Srl item No.31here-in-before but for one three pin socket outlet 5 Amp on the same board with other switches complete all as specified and directed |
| 35 | All as per Srl item No 31 here-in-before but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire complete all as specified and directed |
| 36 | S&F modularswitch, one way 6 Amps , 1 module complete all as specifieds and directed . |
| 37 | S&F modularswitch, two way 6 Amps , 1 module complete all as specifieds and directed . |
| 38 | S&F modularswitch, one way, 16 Amps, 1 module complete all as specifieds and directed . |
| 39 | S&Fmodularsocket 3 pin, 6 Amps, 2 module complete all as specifieds and directed. |
| 40 | S&Fmodularsocket 3 pin, 6 A/16 Amps,2 module complete all as specifieds and directed . |
| 41 | S&F modularfan regulator,120 Watt, 2 module complete all as specifieds and directed |
| 42 | S&F modular bell push ,6 Amps,240 volts , 1 module complete all as specifieds and directed . |
| 43 | S&F modular blank plate , 1 module complete all as specifieds and directed . |
| 44 | Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLSH with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc in existing PVC/steel rigid conduit with new provision ofgalvanised/ steel pressed sunken terminal boxes of suitable sizes for mounting of switches, sockets, fan regulator etc, covered with 3mm thick plastic laminated Hylem / Anchor top cover sheet of required colour, fixed with brass screws and cup washers,including continuous earth wire of size 1.5 Sqmm PVCstranded copper conductor unsheathed, insulated, strandedconnected to common earthpoint dolly for forone light point/fan point/call bell point, 230 voltscontrolled by one switch complete all as specified and directed . . Note:- Proper colour coding is to be followed as per IS specifications. |
| 45 | All as per Srl item No 44 here-in-before but for onesocket outlet, 3 Pin 5 Amps, 230 Volts on independent board complete all as specified and directed |
| 46 | All as per Srl item No.44 here-in-before but for one three pin socket outlet 5 Amp on the same board with other switches complete all as specified and directed |
| 47 | All as per Srl item No 44 here-in-before but for onesocket outlet, 3 Pin 5 Amps, 230 Volts on independent board but below the switch board of light points in same vertical plane complete all as specified and directed |
| 48 | All as per Srl item No 44 here-in-before but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire complete all as specified and directed |
| 49 | S&F switch piano, flush type, single pole, one way, 5/6 Amps, 230 volts, AC supply complete all as specified & directed |
| 50 | S&F switch piano, flush type, single pole, one way, 16 Amps, 230 volts, AC supply complete all as specified & directed |
| 51 | S&Fbell push, flush type, 6 amps complete all as specified and directed |
| 52 | S&FBell, ding dong, AC 230V, single pole complete all as specified and directed |
| 53 | S&F socket outlet, 3 pin,6 Amp,flush type, 230 volts, AC supply complete all as specified & directed |
| 54 | S&F socket outlet, 3 pin,15/16 Amp,flush type, 230 volts, AC supply complete all as specified & directed |
| 55 | S&Fstepped type electronic fan regulator, flush type,single phase, AC supply, 230 V complete all as specified and directed |
| 56 | S&F ceiling rose, surface backelite,three terminal, 240 volts complete all as specifieds and directed . |
| 57 | S&F lamp holder,PVC /Polycarbonate type with back plate for batten fittings complete all as specifieds and directed .. |
| 58 | S&F in replacement LED lamp of capacity 07 Watt suitable for B22 holder complete all as specifieds and directed .. . |
| 59 | S&F LED lightfitting 1 x 20Watt, 220V, Integrated batten type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rosewith all fixing arrengenmentcomplete all as specifieds and directed . |
| 60 | S&F energy saving new generation 10W LED bulk head luminaire with opal diffuser, IP 65 and including connecting up with twin core twisted flexible copper coductor cable with suitable size of 230 volt,50 Hz complete all as specified and directed. |
| 61 | S&F Street light fitting, LED type, 30 Watt, 230V, ACwith high pressure die cast aluminium housing/body, heat resistantcomplate with driver, lamp holder, lamp bracket with impact and corrosion resistant including thermal management in multiple optics, complete with IP 66 protection on andincluding bracket of 25mm dia,light grade,GI pipe , 1.20 m and connecting with twin core twisted flexible copper conductor cable 1.5 sqmmcomplete with all accessories complete all as specified and directed. |
| 62 | S&F LED flood light 70/80 watts,230V,AC,outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp enclosed with glass cover including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. |
| 63 | S&F LED luminaire 600 mm x 600mm, 35/36 watt, 220 V,AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. |
| 64 | S&F LED luminaire round shape, 12 watt, 220 V,AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. |
| 65 | S&F in replacement of fancy type LED fitting 2x7 watts, E27 LED light frosted glass with chrome finishing wall lamp, fixture height 240mm complete all as specified and directed. |
| 66 | S&F factory made epoxy polyester powder coated distribution board TP&N ,4 ways (VTPN DB), double door,(concealed flush to wall) (IP-43 protection) fabricated from minimum 1.2 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 250 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with space for provision for 4 pole MCCB as incommer and outgoing MCBs as required at siteand conforming to IS: 8623 along with cable end box including making good disturbed surface complete all as specified and directed.NOTE: (a) MCCBs and MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/ sleeves and its cost shall be deemed to be included under respective item of BoQ. |
| 67 | S&FMCCB four pole, 100 Amp, 16 KA, 415 volts with adjustable thermal settingscomplete all as specified and directed |
| 68 | S&F in replacement Sheet metal enclosure for DBs,TPN, double door,IP-43 protected, 415 Volts,4 ways with 200 amps rated copper bus bar complete all as specified and directed |
| 69 | S&F in replacement Sheet metal enclosure for DBs,SPN, double door,IP-43 protected, 240 Volts,12 ways with 200 amps rated copper bus bar complete all as specified and directed |
| 70 | S&F in replacement Sheet metal enclosure for DBs,SPN, double door,IP-43 protected, 240 Volts,8 ways with 200 amps rated copper bus bar complete all as specified and directed |
| 71 | S&F in replacement Sheet metal enclosure for DBs,SPN, double door,IP-43 protected, 240 Volts,4 ways with 200 amps rated copper bus bar complete all as specified and directed |
| 72 | S&F in replacement MCB TPN, 40-100 Amp, 415 Volts withrupturing capacity 10 KA, \"C\" series, complete all as specifieds and directed . |
| 73 | S&F in replacement MCB SPN, 32 Amp, 240 Volts withrupturing capacity 10 KA, \"C\" series, complete all as specifieds and directed . |
| 74 | S&F in replacement MCB Single pole, 6 to 32 Amp, 240 Volts withrupturing capacity 10 KA, \"C\" series, complete all as specifieds and directed . |
| 75 | S&FSheet metal enclosure for DBs,single door,IP-43 protected, 240 Volts,2 wayscomplete all as specified and directed. |
| 76 | S&F in replacement Sheet metal enclosure for DBs,SPN, single door,IP-43 protected, 240 Volts,2 wayscomplete all as specified and directed. |
| 77 | S&F in replacement MCB SPN, 40-63 Amp, 240 Volts withrupturing capacity 10 KA, \"C\" series, complete all as specifieds and directed . |
| 78 | S&F in replacement submain wiring with two runs of single core PVC FRLSH unsheathed, insulated, copper cable of 10 Sqmm size, multi stranded, 1100 volts grade with PVC insulated,unsheathedFRLSH copper wire 10 Sqmm for continous earth wire drawn into and includingconcealed PVC rigid conduit of suitable sizeincluding cutting chases in wall and making good all disturbed surfaces matching with existing surfacescomplete all as specified and directed. Note :-Two runs of 10 Sqmm copper cable and one run of 10 sqmm copper wire earth continuty conductor in conduit with accessories shall be measured as one length) |
| 79 | S&F in replacement submain wiring with two runs of single core PVC FRLSH unsheathed, insulated, copper cable of 6 Sqmm size, multi stranded, 1100 volts grade with PVC insulated,unsheathedFRLSH copper wire 6 Sqmm for continous earth wire drawn into and includingconcealed PVC rigid conduit of suitable sizeincluding cutting chases in wall and making good all disturbed surfaces matching with existing surfacescomplete all as specified and directed. Note :-Two runs of 6 Sqmm copper cable and one run of 6 sqmm copper wire earth continuty conductor in conduit with accessories shall be measured as one length) |
| 80 | S&F in replacement submain wiring with two runs of single core PVC FRLSH unsheathed, insulated, copper cable of 4 Sqmm size, multi stranded, 1100 volts grade with PVC insulated,unsheathedFRLSH copper wire 4 Sqmm for continous earth wire drawn into and includingconcealed PVC rigid conduit of suitable sizeincluding cutting chases in wall and making good all disturbed surfaces matching with existing surfacescomplete all as specified and directed. Note :-Two runs of 4 Sqmm copper cable and one run of 4 sqmm copper wire earth continuty conductor in conduit with accessories shall be measured as one length) |
| 81 | S&F in replacement 1100 volt grade, heavy duty cable PVC insulated multistranded aluminum conductor served with PVC tape and overall PVC sheathed in service connections, suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire, one twin core cable flat or circular of size 10 Sqmmcomplete all as specified anddirected. |
| 82 | S&F in replacement 1100 volt grade, heavy duty cable PVC insulated multistranded aluminum conductor served with PVC tape and overall PVC sheathed in service connections, suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire, one twin core cable flat or circular of size 16 Sqmmcomplete all as specified anddirected. |
| 83 | Taking down defective ceiling fanof any sweep andmake after disconnecting electrically & mechanically and transporting to the work shop, dismantling, examing &carrying outrepair as required in all respect for smooth running and brought back to site, re-fixing in position, testing and comprising of the following:-(a)Servicing/overhauling of the ceiling fan by thoroughly cleaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of super enameled varnish over the winding to improve the insulation value complete.(b) M&L for opening, cleaning, drying andre-winding or BLDC circuit plate the burnt/short circuited PCB or winding with same guage super enameled copper wire to maintain speed at load.(c) M&L for preparing the surface by scraping the existing paint, finishing and spray painting to ceiling fan with one coat of synthetic enamel paint .(d) Replacement of ball bearing suitable for ceiling fan of existing sweep & Make/Model |
| 84 | Taking down defective exhaust fan/wall mounting fan/pedestal fanof any sweep andmake after disconnecting electrically & mechanically and transporting to the work shop, dismantling, examing &carrying outrepair as required in all respect for smooth running and brought back to site, re-fixing in position, testing and comprising of the following:-(a)Servicing/overhauling the fanby thoroughly cleaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of super enameled varnish over the winding to improve the insulation value complete.(b) M&L for opening, cleaning, drying andre-windingwith same guage super enameled copper wire to maintain speed at load.(c) M&L for preparing surface, scrabing, finishing and painting of ceiling fan by applying one coat of synthetic enamel paint .(d) Replacement of ball bearing suitable forfan of existing sweep & Make/Model |
| 85 | S&F in replacement ball bearing suitable for ceiling fan of sweep1200mm/1400mm complete allas specified & directed. |
| 86 | S&F in replacement ball bearing suitable for exhaust fan of sweep300mm/450mm complete allas specified & directed. |
| 87 | S&F in replacement capacitor 2.5 mfdfor ceiling fan complete allas specified & directed. |
| 88 | S&F in replacement capacitor 4 mfdfor exhaust fan complete allas specified & directed. |
| 89 | S&F in replacementgun metal bush suitable for ceiling fan of sweep1200mm/1400mm complete allas specified & directed. |
| 90 | S&F in replacement gun metal bush suitable for exhaust fan of sweep300mm/450mm complete allas specified & directed. |
| 91 | S&F in replacementthree core flexible wire of dia 1.0 sqmm for connecting up to ceiling fan/exhaust fan/wall mounting fan complete allas specified & directed. |
| 92 | S&F in replacementrubber bush,wheel typewith nut,bolt,washers,locking clip etc. suitable for hanging of ceiling fan complete allas specified & directed. |
| 93 | S&F in replacementmounting clamps with nut, bolt, washers, locking clip etcsuitable for fixing at the top of down rod of ceiling fan complete allas specified & directed. |
| 94 | S&F in replacement ceiling fan down rod of mild steel pipe 15mm bore of length 1.2/1.5mincluding cutting/threading, making tide for fixing providing check nuts washers and clamp with rubber bush etc complete allas specified & directed. |
| 95 | S&F in replacement casing caping of size 20 mm (ISI marked) complete allas specified & directed. |
| 96 | S&F exhaust fan,steel body,AC, single phase,copper winding with self closing GI louver shutter suitable for operation on 220/230 volts of 300mm sweep,1200 RPM complete allas specified & directed. |
| 97 | S&F exhaust fan, made of sturdy Engineering plastic complete with louvers shutter, voltage 230 V,50 Hz,RPM 1200,copper winding of sweep 250mm complete all as specified and directed . |
| 98 | S&F in replacementelectronic LED driver, 36 watt for panel type fitting of suitable size as per existing model complete all as specified and directed. |
| 99 | S&F in replacementLED driver for 9W/10W/11W/15W/20W fittingas per existing modelcomplete all as specified and directed. |
| 100 | M&L for complete earthingwith galvanised mild steel earth plate electrode of size600x600x6mm thick, burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1, precast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh ,15mm dialight grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specifieds and directed .. |
| 101 | Taking down existing conduit with copper wire and S&F PVC non metallic rigid conduit, 20 mm external dia (medium grade) ISI marked exclusive of boxes but inclusive of all tees, bends, reducer, bell mouth tube ends and fixing accessories, concealed including cutting chases in wall, floor and making good all disturbed surfaces matching with existing surfaces and finally insering the existing copper wire in the conduitcomplete all as specified and directed. |
| 102 | S&F in replacement submain wiring with four runs of single core PVC FRLSH unsheathed, insulated, copper cable of 6 Sqmm size, multi stranded, 1100 volts grade with PVC insulated,unsheathedFRLSH copper wire 10 Sqmm for continous earth wire drawn into and includingconcealed PVC rigid conduit of suitable sizeincluding cutting chases in wall and making good all disturbed surfaces matching with existing surfacescomplete all as specified and directed. Note :-Four runs of 6 Sqmm copper cable and one run of 10 sqmm copper wire earth continuty conductor in conduit with accessories shall be measured as one length) |
