|
| 1 | B/R Minor Work:Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed |
| 2 | M & L Cement concrete in foundations, filling and mass concrete type C- 2, 1:3:6 (40mm graded stone aggregate) complete all specified and as directed |
| 3 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections, tublar section) including distance pieces, cleats etc. of Fe 410 -W (Gde- E- 250) quality A complete all specified and as directed |
| 4 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick ofcolour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or \"J\" /\"L\"hookscomplete all specified and as directed |
| 5 | S&F prepainted galvalume aluminium zinc coating GI basedplain steel sheet 0.50 mm thick ofcolour having tensile strength of 550 Mpa as inplain sheet as in ridges, gutters , facia bd etcl, fixed with self tapping screws or \"J\" /\"L\"hookscomplete all specified and as directed |
| 6 | Preparing new surface of steel over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide as specified and as directed |
| 7 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frame of Partition, doors, windows, ventilators with one or more rebates including joining cleat for fixing glazing clips,rubber packingaluminium map beading packing screws, poweder coated anodised alumiumum fittings etc gap of junction at top, bottom & sieds to be filled with silicone fillers/Neoprene felt etc complete all as specified and as directed by Engr-in-Charge |
| 8 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 9 | S & F in repairs ACP ( Aluminium composite panel ) 4.5 mm thickness to Aluminium skeleton doors and partitons , non Toxic PE core - 3 mm and back coir 0.5 mm ) with minimum 30 - / - 5 mirror PVDF Coating on top coil polyester / epoxy coating on back coil ( 7 +/- micron ) fixed inclusive of necessary frame work / filleting to hold the ACP panels and joint sealed complete all as specified . |
| 10 | S&F for 5.5mm thick plain glass, ordinary quality and glazing with oil putty/aluminium glazing clipsin squares exc 0.5 Sqm in each pane complete all as specified . |
| 11 | S&F 300mm long aluminium anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. |
| 12 | S&F, Aluminium(Die cast)body Door closer hydraulically regulated,designation No3,universal type,suitable for shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified & directed. |
| 13 | S & F for Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber/Aluminium frame work inclusive of necessary frame work / filleting to hold the plywoodpanels and joint sealed complete all as specified . |
| 14 | Demolition of cement concrete in below or above ground floor and paving n.exc 15 cm thk (unreinforced) complete all as specified& directed. |
| 15 | M&L cement concrete type B1 1:2:4 using 20mm graded stone aggregate25mm thick as in flooring etc. |
| 16 | S & F Power coated aluminium window and ventilator shutters fixed, openable or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, locking arrangement etc. complete all as specified |
| 17 | M&Lfor 15-18 mm thick granite of any type/colour(brown/white/yellow/red) as approved,work (tablerubbed mirror polished) edges rounded chamfered and bull nosed laid and fixed in any position (Vertical/Horizontal/ Inclined) over and pointed in white or colour cement with admixer of pigment to match with shade of granite stone incl grinding and polishing complete all as specified and as directed by Engr-in-Charge. |
| 18 | M&L non skid cermic colouredtiles 8mmthick ( square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm,in floor etc and jointed in neat cement slurry andpointed in white cement or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer in CM (1:6) all as specified and directed |
