Tender For Repair/ Servicing Of Dg Set, Lt Panels, Amf Panel Effluent Treatment Plant And Misc Work At Mh Shimla Under Ge (I) Jutogh; 1 Comprehensive Maintenance of 630 KVA DG Set capacity after 200-250 Hrs running/after 3 month from last engine oil changed or earlier, complete all as specified and directed.Note: (i) Maintenance of DG set to be carried out as per norms of OEM instructions and by qualified service engineer of OEM authorized service centre. (ii) Materials/Spare parts/Lub oil required for above B check maintenance shall be inclusive quoted rate. 2 Supply only of Lub Oil filter element with O ring,and carry out B check maintenance for the DG set of 630 KVA DG Set at various locations, complete all as specified and directed. 3 Supply only of Fuel filter element with O ring, for carry out B check maintenance for the DG set of 630 KVA DG Set at various locations complete all as specified and directed. 4 Supply only of Air filter elementprimary and secondary with O ring, for carry out B check maintenance for the DG set of 630 KVA DG Set at various locations complete all as specified and directed. 5 Comprehensive Maintenance of up to 50KVA KVA DG Set capacity after 200-250 Hrs running/after 3 month from last engine oil changed or earlier, complete all as specified and directed.Note: (i) Maintenance of DG set to be carried out as per norms of OEM instructions and by qualified service engineer of OEM authorized service centre. (ii) Materials/Spare parts/Lub oil required for above B check maintenance shall be inclusive quoted rate. 6 Supply only of Lub Oil filter element with O ring,and carry out B check maintenance for the DG set of up to 50KVADG Set at various locations, complete all as specified and directed. 7 Supply only of Fuel filter element with O ring, for carry out B check maintenance for the DG set of up to 50KVADG Set at various locations, complete all as specified and directed. 8 Supply only of Air filter element with O ring, for carry out B check maintenance for the DG set of up to 50KVADG Set at various locations, complete all as specified and directed. 9 S&F in repair of self starter of existing Make for 630 KVA DG setcomplete all as specified and directed. Note: Old u/s item to be deposited in AGE E/M store yard. 10 S&F in repair of solenoid switch of existing Make for630 KVA DG set, complete all as specified and directed. Note:Old u/s item to be deposited in AGE E/M store yard. 11 S&F in repair of dynamo and refixing after necessary repair including replacement primary coil, auxiliary coil and carbon brush forthe DG set of capacity 630 KVA including taking out burnt / unserviceable, complete all as specified and directed.Note: Old u/s item to be deposited in AGE E/M store yard. 12 M&L for cleaning of the fuel tank by drain the fuel and remove the dust/ sludges etc and refill the fuel, complete all as specified and directed. 13 M&L for cleaning of the fuel tank radiator by drain the coolant mix remove the dust/ sludges etc and refill same complete all as specified and directed. 14 Maintenance and servicing of alternator by removing of dust and moisture from field coil and armature coil by blowing the hot air forthe various capacity of DG set varying from 630 KVAcomplete all as specified and directed. 15 M&L for replacement of Voltage regulator Device (AVR) MX321-MK 2 (As per existing) for the DG set of capacity 630KVA of any as per existing complete all as specified and directed. Note: Old u/s item to be deposited in AGE E/M store yard. 16 M&L for replacement of Display power control for the DG set of capacity 630 KVA, complete all as specified and directed.Make- Procom or in equivalent as approved. Note: Old u/s item to be deposited in AGE E/M store yard. 17 Supply only of Lub Oil of specific grade (20W40 or 15W/40Eqv.) for carrying out B check maintenance under SL No-1 above, complete all as specified and directed. Make - Kirloskar/ Servo pride(IOC)/ Castrol/ Veedol or Equivalent. 18 Supply only of premix coolant of radiator water for carrying out B check maintenance under Item No -1 above complete all as specified and directed. Make: Bharat/ Greaves or equivalent as approved. 19 M&L for filling of distilled water for battery complete all as specified and directed. 20 Supply only cotton waste complete all as specified and directed. 21 S&F in repair all type of Hoses for lub oil, fuel, coolant etc., necessary clamping, complete all as specified and directed. 22 S&F in repair turbo overhauling kitas per suitable existing DG set up to 630 KVA, complete all as specified and directed. 23 M&L for replacement of AMF controller unit type CVCC , input 230 V A ±10%, 50 Hz ±5%, output 24 Volt DC, 10 Amps,for DG Set of 5 circuit(As per existing) including taking out old unserviceable one complete all as specified and directed. Make: Kirlosar/ Procom/ or Equivalent as approved.Note: Old u/s item to be deposited in AGE E/M store yard. 24 Supply only CVCC battery charger Input 230 Volt±10% 50 Hz± 5% and output 24 Volt DC 10 Amp (As per existing) including taking out old unserviceable one complete all as specified and directed. Note: Old u/s item to be deposited in AGE E/M store yard. 25 Supply, Laying, Jointing and testing, XLPE insulated armoured heavy duty electric cable of size 150 sqmm 3.5 corewith aluminium conductor 1100 Volts grade laid in trenches/floor or fixed on wall/pole including brass compression cable gland, terminal lug etc, complete all as specified and directed. Note: Old u/s item to be deposited in AGE E/M store yard. 26 Supply, Laying, Jointing and testing, XLPE insulated armoured heavy duty electric cable of size 16 sqmm 3.5 corewith aluminium conductor 1100 Volts grade laid in trenches/ floor or fixed on wall/ pole including brass compression cable gland, terminal lug etc, complete all as specified and directed. Note: Old u/s item to be deposited in AGE E/M store yard. 27 Servicing of HVAC unit comprising checking of compressor, controls such as pressure cut outs, cooling coil, blower motor, checking/ arrestingof gas leakage if any incl necessary charge of gas etc of 8.5TR (02 Nos) cap, complete all as specified and directed. 28 Servicing and checking of ETP including testing of treated water with all parameters form authorized Agents minimum two month interval complete all as specified and directed. 29 Supply only Alum suitable for ETP complete all as specified and directed. 30 Supply only electrolyte solution suitable for ETP complete all as specified and directed. 31 S&F LED light fitting 12 Watt 230 V indoor type suitable for lift car complete all as specified and directed. Note:Old u/s item to be deposited in AGE E/M store yard. 32 S&F LED light fitting 1x8 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.®complete all as specified and directed. Note: Old u/s item to be deposited in AGE E/M store yard. 33 M&L for painting of DG set capacity of up to 700 KVA using spray paint with existing colour, complete all as specified and directed 34 M&L for painting of DG set capacity of up to 50 KVA using spray paint, complete all as specified and directed. 35 M&L for painting of DG set panel other plant machinery using spray paint, complete all as specified and directed. 36 M&L for PVC pipe 50 mm for ETP plant includingfixing arrangements, complete all as specified and directed.Note:Old u/s item to be deposited in AGE E/M store yard. 37 Servicing and checking of soft water plant including testingwith all parameters form authorized Agents minimum two month interval, complete all as specified and directed. 38 Supply in repair of Main Supply Card for fire alarm panel 796-178 MORLEY HONEYWELL 230 V, AC, power supply module for ZX5Se, complete all as specified and directed. 39 S&F Galvanized zinc metallic zinc coated Iron earthing electrode specialized developed for high sensitive equipment. Model SN001 (LXXVI MM ) as per Cpri 300 Cm long. Tested on 52.kA, C % 12 max, mn 0.60%mm class type GALV. Yield strength 329, tensile Strength 426, Elongation Bend/ Flattering. Thickness Internal disposes 2 inch x6mm with base plate 3.15 to close the earthing rod. Terminal 2 inchx6mm filled with highly conductive compound which increase the life of Earthing electrode. Composition of chemical filled in Electrode water solubility . Grain size 100 mesh, along with SN make BFC Compound non toxic, non reactive, non explosive and non corrosive, longer life easy to maintain less space consistent results. Earthing pit and chamber cover, complete all as specified as directed. Make: SN ENGINEERING or in equivalent as approved.
