|
| 1 | Demolition of brick/block work or stone/boulder masonrybuilt in cement mortar complete all as specified and directed. |
| 2 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and directed. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 4 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as specified and directed. |
| 5 | Taking down of cement plaster fromsurfaces of wallof any description including raking out joints, hacking out for key, scrubbing down with water etc including complete treatment if any complete all as specified and directed. |
| 6 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft soil complete all as specified and directed. |
| 7 | Excavation over area not exceeding 1.5 metre deep and getting out in hard/dense soil complete all as specified and directed. |
| 8 | Removing excavated material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed. |
| 9 | Material and labour for PCC 1:4:8, type D2(using 40mm graded stone aggregate)as in foundation filling, mass concrete and sub base complete all as specified and directed. |
| 10 | Material and labour for PCC 1:2:4, type B2 (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed. |
| 11 | Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 12 | Material and labour for precast cement concrete (1:3:6),type C1 (using 20 mm graded stone aggregate) as block masonary with solid blocks exceeding 10 cm in width and setting in CM 1:6 complete all as specified and directed. |
| 13 | Material and labour for precast cement concrete (1:2:4),type B1 (using 20 mm graded stone aggregate) as in window or door cills, lintels bressumers, steps, quoin block (for use with masonry) string courses, coping, kneelers, apex stones, piers caps etc amd setting in mortar joints to match complete all as specified and directed. |
| 14 | Material and labour forRCC (nominal mix) 1 : 2 : 4,type B1 ( using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 15 | Material and labour for Precast RCC cover slab 1:2:4, type B1 (using 20mm graded stone aggregate) for manholes with plain faces including setting in CM 1:4 complete all as specified anddirected. |
| 16 | Use and waste the form work to soffits of suspended slab such as roof slab, landings and similar work (Horizontal or sloping) for fair finished surface not exceeding 200 mm thick complete all as specified and directed. |
| 17 | Use and waste the formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished surfaces of concrete complete all as specified and directed. |
| 18 | Material and labour forTMT steel bars 6mm to 8mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia but in stirrups complete all as specified and directed. |
| 19 | Material and labour for 15mm thick rendering in CM 1:4 on concrete surfaces finished even and smooth without using extra cement smooth finished complete all as specified and directed. |
| 20 | Material and labour for 10mm thick rendering in CM 1:6 on concrete surfaces of walls, finished the surface even and smooth wihout using extra cement etc complete all as specified and directed. |
| 21 | Material and labour for5 mm thick rendering in CM 1:3 on concrete surfaces of ceiling, finished the surface even and smooth without using extra cement etc complete all as specified and directed. |
| 22 | Material and labour for preparation of new plasteredsurfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 23 | Material and labour for preparation ofnewplasteredof ceiling and applying three coats of white wash complete all as specified and directed. |
| 24 | Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick, (square /rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc, laid over 15mm thick screed bed in CM 1:6 and set and jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed. |
| 25 | Material and labour for glazed ceramic coloured tiles 350x 250x7mm / 450x350x7mm thick over vertical surface of wall, set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat of 10mm thick in CM 1:4 complete all as specified and directed. |
| 26 | Material and labour for 20mm thick granite (of any type), pre-polished in cooking platforms including mouldings and like fixed with neat cement slurry over 15mm thck screed bed in CM 1:4 including pointing using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 27 | Material and labour for 20mm thick granite (of any type),pre-polished for front side of wall ove 10mm thick rendering in CM 1:3 and pointing including mouldings including pointing using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 28 | Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 29 | Material and labour forfactory made 18 mm thick (+-0.7 mm) PVC celuka one side preleme and PVC celuka of density 600 Kg/Cum manufactured by an ISO 9001-2008 certified company for kitchen cabinet shutter complete as per manufatures specification complete all as specified and directed. |
| 30 | Material and labour forfactory made 18 mm thick (+-0.7 mm) PVC celuka plain white colourtedof density 600 Kg/Cum manufactured by an ISO 9001-2008 certified company for kitchen cabinet shutter complete as per manufatures specification complete all as specified and directed. |
| 31 | Material and labour for factory made 12 mm thick (+-0.5 mm) PVC celuka on plain white colourted of density 600 Kg/Cum manufactured by an ISO 9001-2008 certified company for kitchen cabinet shutter complete as per manufatures specification complete all as specified and directed. |
| 32 | Material and labour for factory made 05 mm thick (+-0.2 mm) PVC celuka on plain white colourted of density 600 Kg/Cum manufactured by an ISO 9001-2008 certified company for kitchen cabinet shutter complete as per manufatures specification complete all as specified and directed. |
| 33 | Supply and fix 75mm stainless steel handles complete all as specified and directed. |
| 34 | Supply and fix 100mm stainless steel hinges complete all as specified and directed. |
| 35 | Supply and fix magnet typePVC door stopper 30 to 40mm dia fixed with screw behind the door complete all as specified and directed. |
| 36 | Supply and fix framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for anging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete coforming to Fe 410 -W (Gde-E- 250)quality-A complete all as specified and directed. |
| 37 | Supply and fix mild steel, plain, black sheet of 0.80mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 38 | Cutting into existing manholes for connecting new drains,150 mm internal dia old pipe and making good to pipe and rendering , cutting out existing benching for branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type benching as required ® .section) in cement concrete 1:2:4 type B-l usinf 20mm graded stone aggregate smooth finished, and reforming benching as required complete all as specified and directed. |
| 39 | Supply and fix salt glazed stone ware (SGSW) grade \"A\" drain pipes 150 mm internal dia laid in trenches on concrete bed and jointed, complete all as specified and directed. Note :- Excavation, earth work and concrete bed shall be measured and paid for separately under respecitive items of this schedule. |
| 40 | Supply and fix of oil and grease trap of Lenegth -1.5 metre, Width- 1.0 metre and Hight -1.0 metre, material SS 304, inlet & outlet size as required, Volume 1500 litre complete all as specified and directed.Make- Arise or equivalent as approved by GE |
| 41 | Material and labour for PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) for bed to drain pipes of 150 mm boreincluding packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 42 | Supply and fix 75 mm dia PVC SWR pipes single socked in any length with rubber rings joints laind in trenches or fixed to wall complete all as specified and directed. |
| 43 | Supply and fix 75 mm dia PVC bends of any radius complete all as specified and directed. |
| 44 | Supply and fix 110 mm dia PVC SWR junction single Y equal or unequal door complete all as specified and directed. |
| 45 | Supply, fixing, testing and commissioning of 2 HP non clog vertical submersible pump motor, single phase 240V, suction and delivery-50mm, head-15m along with starter contrller with suitable size capacitor and MCB all etc complete as specifed and directed. |
| 46 | Supply and laying heavy duty UPVC pipes with all fittings and fixtures fixed to walls with necessary saddling/clamping or laid in floor of size 50 mm dia complete all as specified and directed. |
| 47 | Supply and fixing heavy duty UPVC gate valves, screwed/plain both ends for PVC pipe of size 50 mm dia complete all as specified and directed. |
| 48 | Supply and fixing UPVC union, screwed/plain both ends for PVC pipe of size 50 mm dia complete all as specified and directed. |
| 49 | Supply and fixing of DP sheet enclosure with DP MCB of capacity 16 Amps complete all as specified and directed. |
| 50 | Supply and laying of 3 core 2. sqmm submersible flat cable PVC insulated round sheathed copper annealed conductor of voltae grade 1100 volts etc complete drawan through heavy duty PVC conduit of size 20mm on ceiling/walls including necessary saddling/clamping all etc complete all as specfied and directed. |
