Tender For Periodical Services To General Assembly Shop-I And Hull Shop-I At New Facility At Hvf Avadi.; 1 Trimming of Tree branches all around the building and disposing the cutted branches without damaging existing roof, wall etc., to a lead exceeding 1 km from the site and dumping the same including clearing the cutted site from any cutted branch/ tree debris. The cost also includes use of safety aspects required at site. 2 Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting outin hard / dense soil for a width of 3 m from the shop wall to remove all the earth on the wall portion to ensure the full painting of the wall including spreading and levelling the excavated earth in the nearny sorrounding low lying areas 3 Hacking out plastering 15 cm vide on either side of the crack cutting of 6mm V groove by inserting chicken mesh in the gaps of wall and applying pressure grouting the cracks withPU filler material of reputed companies such as Master Builder solution, Fosroc, Alchemica, Dr Fixit, or equivalent make and finishing to the original shape as directed. The Crack filling shall be carried out as per the OEM specifcations specified by the OEM and the materialto be used shall be of freshly manufactured having a miminum life span of six months when brought ot site. 4 Taking down plastering on cement or cement lime plaster any description as directed. 5 Demolition of Reinforced Cement Concrete structure of any description. 6 Supply and fixing of Wire netting of galvanised steel wire 0.91mm dia fixed with tinned tacks of wire staplessize of mesh will be 12mm. 7 M & L for Dubbing in CM 1:6. 10mm thick on faces of old brick work and concrete surfaces. 8 Material and labour for plastering in cm 1:4 15 mm thick on fair faces of brick work and cement concrete surfaces. 9 Material and labour for plastering in cm 1:3 for 12 mm thick on fair faces of cement concreteceiling surfaces. 10 Forming jambs using CM 1:4to openings (to foregoing item), including cutting,toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete. 11 Material and labour for Providing, cement concreteType B 0 1:2:4 using 12.5 mm graded aggregate in lintels, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly roundedor chamfered angles and throating, as directed 12 Material and labour for Reinforced cement concrete (nominal mix) Type B0 1:2:4 (12.5mm graded) in Chajjas 13 Material and labour for Formwork to chullah hoods, chajjas, troughs and similar items including edge including fair flat finished surface. 14 M & L for Brick work built inCM.1:6 using Sub-Class “B” Bricks. 15 Supply and fixing of TMT MS Bars 10mm dia and over, cut to length bent to shape required including cranking, bending, spiraling for hoping for columns, hooking ends and binding with MS Wire not less than 0.9mm dia or securing with clips. 16 Material and labour for TMT mild steel bars 8 mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clips 17 Complete removal of existing any type of treatment ( White wash / OBD /Cement paint / Synthetic enamel paint/ Aluminium paint/ polish) from walls surface till the complete exposure of old plastering surfaces are exposed. The contractor shall only use mechanized equipment while complete removal inside the office room and shop walls. The dust enamating while complete removal shall be cleaned on daily basis so that no hindarence to production shall happen in shop floor and office area. The surface shall be fully scrubbed to have a uniform and levelled surfaces, The safety equipments requirements for the worker working shall be the responsiblity of the contractor.The rate is inclusive of covering of alltheequipments in the office floor to protect from the dust particles using new taurpaulin sheets wherever required. 18 Material and labour for applying one coat of wall primer forexterior / Interior as required at site all complete Including preparation ofcomplete removal surfaces and new puttysurfaces. The primer to be used shall be seperate for the interior walls and exterior walls. The primer to be used will depend on the recommendation by the manufacturer for the type of interior emulsion and exterior emulsion to be used as specifiedin the item No: 20 and 24 The paint tobe used shall be ofAsian paints, Berger paints, Nerolac paints or suitably equivalent. The brands shall be got approved by EIC. 19 M & L for applying 3mm thick wall care putty on wall surfaces the putty to be applied in layers as recommended by the manufacturer and aslo as per the SSR part - 1 specifcations all as specified and directed by EIC. The putty to be used shall be of Asian paints ( Truecare wall putty), Berger paints (Bison wall putty). Nerolac paints (Nerolac cement putty), Birla wall care putty, JK wall putty or suitably equivalent. 20 M& L for applying two coats of white washing on ceilings surfaces including preparation of old ceiling surfaces complete all as specifiedand directedby EIC. 21 M&L for applying two coats of plastic emulsionon internal wall surfaces including preparaition of old wall surfaces complete all as directed. The interior Emulsion shall be of premium interior emulsionmanufacurured by reputed companies such as Asian paints (premium emulsion or apcolite supremapremium Emulsion) , Berger paints (Rangoli) Nerolac paints (Beauty Gold) or suitably equivalent. The brands shall be got approved by EIC. 22 Material and Labour for painting of steel surfaces with two coats of synethic enamel paintinculding preparation of oldsteel painted surfaces. The paint tobe used shall be ofAsian paints, Berger paints, Nerolac paints or suitably equivalent. The brands shall be got approved by EIC 23 Material and Labour for painting of wooden surfaces with two coats of synethic enamel paintinculding preparation of oldwoodensurfaces The paint tobe used shall be ofAsian paints, Berger paints, Nerolac paints or suitably equivalent. The brands shall be got approved by EIC. 24 M & L for french polishing one or more coat on old surfaces of any description , width or girth including cleaning and preparing the old polshed surface to receive the new coats.The Material tobe used shall be ofAsian paints, Berger paints, Nerolac paints or suitably equivalent. The brands shall be got approved by EIC 25 Material and labour for applying two coats of exterior emulsion on external wall surfaces all complete Including preparation of old untreated surfaces. The Exterior emulsion to be used shall be ofAsian paints (Apex Ultima supreme or Apex ultima) Berger paints (weather coat all guard) Nerolac paints (Excel total) or suitably equivalent. The brands shall be got approved by EIC The Contractor shall give the guarantee as specified by the paint companies for their above exterior emulsion product. 26 Material and labour for painting surfaces of any description, over 10cm in width or girth, on structural steel surfaces like purlin trusses, open gantry girders and stanchions etc.,with one coat of aluminium paint including prepartation of old surfaces as specified and as directed. Protective measure (As per MES Part-I spec point 15.10.3) Surfaces of doors, windows, floors, articles of furniture, machineries etc., and such other parts of the building not to be treated shall be protected by using new taurpaulin sheets to avoid the paint drops , dust on the machines and shop floor from being splashed upon. Such surfaces shall be cleaned of splashes of white wash, colour wash, distemper, aluminium/synthetic enamel paint etc. The contractor shall be responsible for any damage to the fittings, fixture and furniture etc., The paint tobe used shall be ofAsian paints, Berger paints, Nerolac paints or suitably equivalent. The brands shall be got approved by EIC 27 Material and labour for painting surfaces of any description, n exc 10cm in width or girth, on structural steel surfaces like purlin trusses, open gantry girders and stanchions etc.,with one coat of aluminium paint including prepartation of old surfaces as specified and as directed Protective measure (As per MES Part-I spec point 15.10.3) Surfaces of doors, windows, floors, articles of furniture, machineries etc., and such other parts of the building not to be treated shall be protected by using new taurpaulin sheets to avoid the paint drops , dust on the machines and shop floor from being splashed upon. Such surfaces shall be cleaned of splashes of white wash, colour wash, distemper, aluminium/synthetic enamel paint etc. The contractor shall be responsible for any damage to the fittings, fixture and furniture etc., The paint tobe used shall be ofAsian paints, Berger paints, Nerolac paints or suitably equivalent. The brands shall be got approved by EIC 28 Supply ofarticulating hydraulicboom lift which can reach up to the height of15 to 25 metres height self moving type including necessary diesel for operating the articulated boom liftincluding a operator who will operate the articulated boom lift.The boomlift shall be used only for ensuring safety aspects at site like tying of net ,tying of life line, boom lift timings hour shall be counted from srart of the safety related work at site to completion of the safety related work for a particular day. 29 Repairing of existing steel windows shutter of any size and any no of shutterswhich are hanging from position by cutting the old ones and refabricatingthe hinges to suit the existing frame including repairing of window frame / sash bars if any required 30 Repairing of existing Aluminiumwindows shutter of any size and any number of shutterswhich are hanging from position by cutting the old ones and refabricatingthe hinges to suit the existing frame including repairing of window frame / sash bars if any required 31 Material and labour for paintingtwo coats of White Emulsion paint on old false ceiling board by removing all the board from the position without disturbing any of the Aluminium section and stacking neatly, cleaning the board from dustand painting two coats of white permium emulsion after giving recommended interval for curing as suggested by the Manufacturer and allowing to dry completely and refixing the boards tot he false ceiling and securing as required. 32 Material and labour for paintingtwo coats of White Synthetic enamel paint on old false ceiling board by removing all the board from the position without disturbing any of the Aluminium section and stacking neatly, cleaning the board from dustand painting two coats of white permium emulsion after giving recommended interval for curing as suggested by the Manufacturer and allowing to dry completely and refixing the boards tot he false ceiling and securing as required. 33 Supply and fixing of structuralmild steelsuch as ISA MS plates of Fe 410 W (grade E 250) - A Quality of any sizefor the damaged door welding and making good 34 Material and labour for painting red oxide primer / zinc chromate primer on new/ old steel surfaces including preparaiton of new steel surfaces not exceeding 10CM in width or girth. The paint tobe used shall be ofAsian paints, Berger paints, Nerolac paints or suitably equivalent. The brands shall be got approved by EIC 35 Material and labour for painting red oxide primer / zinc chromite primer on new/ old steel surfaces including preparaiton of new steel surfaces over 10CM in width.The paint tobe used shall be ofAsian paints, Berger paints, Nerolac paints or suitably equivalent. The brands shall be got approved by EIC 36 Supply and fixing sheet glass ordinary quality of 4.00mm thick and glazing with oil putty in square not exc. 0.5 Sq.m in each paneincluding removal of damaged glass from position and refixing the aluminium clamps / beading, the rate is inclusive of replacement of damaged aluminum beading if any and making good. 37 Supply and fixing of rough cast wired glass 6.4 mm thick and glazing with oil putty by removing the aluminium beading and refixing after the fixing of new glass in square not exc 0.5 Sq.m in each pane . 38 Material and labour for one coat of damp block paint on wall surfacesto arrest dampness on the wall srfaces after preparing the old wall surfaces. The paint tobe used shall be ofAsian paints , Berger paints, Nerolac paints or suitably equivalent. The brands shall be got approved by EIC. 39 Removal of demolished debris / rocks to a lead exceeding 1.50 km but not exceeding 5 km and depositing where directed. 40 Material and labour for Writing letters/stencil writing (Building Nos) or letters, Figures (of any type and not exceeding 30 cm high with fluorescent paint complete all as directed by EIC.The Contractor shall note down all the letters before painting and shall rewrite the same in the old locations.
