Tender For Renovation Of Dharmasthan Atchala, kajora-West Bengal

Tender For Renovation Of Dharmasthan Atchala-1 2 3 4 M.S. structural works with hollow sections (square or rectangularshape) conforming to IS: 806-1968 & IS:1161-1998) connected toone another with bracket, gusset, cleat as per design, drawing &direction of Engineer-in-Charge complete including cutting torequisite shape & size, fabrication including metal arc weldingconforming to IS: 816-1969 & IS: 9595 using electrodes of approvedmake and brand conforming to IS:814-2004, haulage, hoisting anderection all complete. The rate includes the cost of all M.S. Hollow section, allconsumables such as electrodes, gas and hire charges of all toolschages (such as electricity, labour insurance) etc. complete P-101, 1-2A MT 0.4 58832.00 23532.80 Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. analysis rate cum 1 25 0.25 0.25 1.56 1.56 5247.98 8199.97 Brick work with 1st class bricks in cement mortar (1:6) analysis rate cum 1 25 0 0.25 0.25 0.3 1.5 1.88 0.00 1.88 4989.81 9355.85 Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc initial straightening andremoval of loose rust (if necessary), cutting to requisite length, hooking andbending to correct shape, placing in proper position and binding with 16gauge black annealed wire at every intersection, complete as per drawingand direction. analysis rate MT 0.09813 54730.83 5370.46 Plaster (to wall, floor, ceiling etc.) with sand and cement mortarincluding rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor) [Excludingcost of chipping over concrete surf 5 (c) 15 mm thick plaster 2 25 0.5 25.00 sqm 25 0.25 0.00 25.00 133.71 3342.75 Aluminium sheet ridging fitted with self tapping screws, EPDM washers etc complete. (Minimum 225mm end lapping 1 6 (A) 300 mm lapping each way (a) With 0.71 mm sheet 25 25.00 394.00 9850.00 (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 7 p-200, 1-8 a as per periphery of structure 40.00 29.00 1160.00 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface iv) Two coats (with any shade except white) p-201, 1-2 a iv 40.00 79.00 3160.00 Supplying, fitting & fixing Industrial Troughed Aluminiumsheet (excluding the supporting frame work) of approvedmake & brand in alloy 3105 conforming to 15: 1254-1991fitted and fixed with 75 mm & 25 mm Self tapping screw, EPDM Washer 16 mm dia & 3 mm th washer etc completewith 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work) (Aluminiumsheet to be supplied by contractor) p-82, 1-14 (i) In Roof:- a) With 0.71 mm thick sheet sqm 1 25 1.25 31.25 31.25 821.00 25656.25 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC (b) Two Coat %sqm 25.00 4510 1127.50 be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. b) Premium 100% Acrylic Emulsion sqm 25 84 2100.00 2 Providing & fixing Concrete Sign Board as per IRCspecification of size 900 x 750 x 37 mm. thick madewith RCC 1:1%:3 with pakur variety stone chipsreinforced with double layer IRC febric (75 x 75 mmmesh) and fixed with necessary nuts & bolts on twoRC precast posts 100 mm. x 150 mm. of height 2.65m. of which top 750 mm. is of section 100 x 13 mm.and 1.90 metre above GL & 0.75 metre below GLincluding digging hole, repacking the same withcement concrete 1:3:6 with Jhama khoa or with localstone chips etc. coats on both faces lettering sign marks etc. as percomplete including painting twodirection of the Engineer-in-Charge. (The rate isinclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc. complete P-270, 1-8.07 1 2230.00 2230.00

INR 500 /-

INR 1.15 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB