|
| 1 | M&L for Premix bituminous, macadam (consolidated thickness 75mm or less consolidatedwith 4% binder content (using paving bitumen ofgrade VG-30) by weight of total mix, using hot mix process and laid by mechanical paver and rolled with 8 to 12 tonne power roller to gradient and camber required, complete all as specified and directed.Note: The work shall be wxecuted by using hot mix plant & mechanical paver. The rate quoted shall be deemed included for cement filler |
| 2 | M&L for Premix bituminous, macadam (consolidated thickness 75mm or more consolidatedwith 4% binder content (using paving bitumen ofgrade VG-30) by weight of total mix, using hot mix process and laid by mechanical paver and rolled with 8 to 12 tonne power roller to gradient and camber required, complete all as specified and directed.Note: The work shall be wxecuted by using hot mix plant & mechanical paver. The rate quoted shall be deemed included for cement filler |
| 3 | Preparingexisting black top by brushing with wire brush, for removing caked mud, etc sweeping with broom & finally fanning the cleaned surface with gunny bag to remove loose dirt and applying evenly tack coat of paving bitumen VG-10 @ 5Kg per 10 Sqm. complete all as specified and directed. |
| 4 | M&L for bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content (using paving bitumen ofgrade VG-30) by weight of total mix, using hot mix process and laid by mechanical paver, rolled and compacted to required camber and gradient using power roller 8 to 12 tonne capacity, complete all as specified anddirected.Note: The work shall be wxecuted by using hot mix plant & mechanical paver. The rate quoted shall be deemed included for cement filler |
| 5 | M&L for prepration of road surfces and applying thermoplastic reflective paint marking 2.5 mm thick single coatas in lines, dashes, arrows, letters, zebra crossing of 100/150 mm wide using HOT MARK thermoplastic modern propelled road marking machine incl all necessary ingredients such as binder, glass beads . titanium dioxide calcium carbonate inter fillers thermoplastic requiredments for glass beads shall be table No 8004 of MORTH speccification incl sprayingof glass beads etc.thetc. complete all as per manufactures instruction and as directed.Note: Application shall be carried out through mechanical appliances by the approved applicator of the manufacturer of paint. |
| 6 | Demolition of cement concrete any description and in any position and removal of demolished material out side of defence land not otherwise specifically provided forcomplete all as specified and directed. |
| 7 | M&L hardcore of gauge exc. 63mmof broken stone boulders n exc 100 mm deposited, spread and levelled in layers watered and compacted by mechnical roller for laying hard standing, complete all as specified and directed. |
| 8 | M&L for 100 mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floors finished fair, complete all as specified and directed. |
| 9 | M & L for Sand filling under floorings/pavement spread and levelled in layers n.exc 15 cm thick complete including watering and consolidation, complete all as specified and as directed. |
| 10 | M & L of Machine pressed precast conctete interlocking paver block colour glossyfinishedrubber pressed any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade (R) with Grey cement and pigment, complete all as specified and as directed. |
| 11 | M&L cement concrete 1:2:4 type B1 (using 20mm graded aggregate)as in coping, inearly necessary formwork required, complete all as specifed and directed. |
| 12 | S&F in repair solar road studs of size 125mm x 125mm x 20mm, aluminium alloy & polycarbonate stud (Red/yellow LEDs) 3+3 LED\"s with shank in tough aluminium diecast body with MS zinc coated nails of size 12mm dia and 120mm long, complete as per MORTH/IRC specifications |
| 13 | S& F in repairaluminium rod stud two way reflective dimension 110x128x30 mm aluminium alloy body reflective panel amber/ red or weight 530 gms complete aluminium coated of approved,, complete all as specified and directed. |
| 14 | NOTE : SCHEDULE OF CREDIT (Amount on page No 33 shall be deducted offline from the total quoted amount to arrive at the net contract sum to be considered for acceptance.) |
