|
| 1 | Dismantling and taking out carefullyold Unserviceable / Worn – Out and broken components of Wooden and Steel Furniture without damaging the remaining serviceable members, furniture and Supplying and Fixing of the same with new components such as Prelaminated MDF Board, Exterior Grade, One side decorative lamination and other side balancing white conforming to IS – 14857, Plywood BWR Grade conforming to IS – 303, Mild Steel Sections, Iron mongery fittings, Builders Hardware, Tapestry Cloth, Foam, Plastic Cane, Cotton / Nylon Newar etc. and Wood Work made of First Class Hard Wood [Teak Wood], seasoned, free from knots and cracks, wrought finished including tightening the joints, pinning, screwing, nailing, wedging, gluing, providing hinges, polishing / painting the entire article with standard workmanship complete to its original shape and size all as shown on drawings, as specified and as directed for following articles:Note: All furniture items shall be painted / polished only after completing all repairs and renewals etc. The furniture shall be repaired / renewed, Painted / Polished on site at Officers Married Accommodation after completion of B / R and E / M Welcome Maintenance works. All materials to be incorporated in the work shall conform to the latest IS Specification. Anti-termite and anti-bug treatment shall be done before polishing the wooden furniture and rate quoted is deemed to be including the same. |
| 2 | TABLE OFFICE STEEL CLERK / SUBORDINATE / OFFICER - TP GODREJ |
| 3 | S & F in repair Top with new 12 mm thick Prelaminated MDF top size 1199 x 590 mm with PCPP egding to Table Offce steel Godrej Model T-8 / T-101 or T- 111 |
| 4 | S & F in repair Top with new 12 Prelaminated MDF top size 1365 x 680 mm with PCPP egding to Table Offce steel Godrej Model T-9 or T-102 |
| 5 | S & F in repair Top with new 12 Prelaminated MDF top size 1665 x 900 mm with PCPP egding to Table Offce steel Godrej Model T-104 |
| 6 | S & F in repair Top with new 12 Prelaminated MDF top size 900 x 590 mm with PCPP egding to Table Offce steel Godrej Model T-31 / T-32 |
| 7 | S & F in repair lock with new Godrej 4 lever lock to drawer of Table Offce steel Godrej Model T-8 /T-9/T-101/T-102/T-104/T-111/T-31/T-32 |
| 8 | S & F in repair 50 mm size PVC handles for Table Offce steel Godrej Model T-8 /T-9/T-101/T-102/T-104/T-111/T-31/T-32 |
| 9 | CHAIR STEEL WITH/WITHOUT ARMS /WITH DESK MODEL CHR 8 / CHR 73/CHR1 8/ CHR 14 /CHR 7 / CHR 6 /CHR-18-B / CH 18-C MAKE GODREJ |
| 10 | S & F in repair 20 mm MS Square pipe at leg/frame to weld with spot gas welding to retain stability and one coat of red oxide primer at jointed area |
| 11 | Preparation of old painted steel surface and apply one coat of spray paint with synthetic enamel paint (TA grey / Graphite grey shade) |
| 12 | S & F in repair Hand rest of 1st class hardwood (teak wood) of size 50x20x255 duly laquer polished |
| 13 | Remove u/s worn out / faded cushion seat/back and S & F of new Seat/back with cushion covered fitted on 12 mm Ply and cover with black colour leatherite cover of cost not less than Rs 400 per Rm duly fixed with screws to existing frames of chair for model CHR 8 / CHR 73/CHR-18-B / CH 18-C |
| 14 | Remove u/s worn out cane from seat/back and caning with Mat Pattern new plastic cane of 2 mm wide 0.4 mm thick half-round in white colour, dulylaquer polish the existing wooden frames before caning for MODEL CH-18 / CHR 14 /CHR-7/CHR-6/CHR-18-B / CH 18-C |
| 15 | S & F in repair Hand Pad made of Prelaminated PLB of size 300 x 600x 20 mm made to shape with PVC beading as per drg and fixed with existing FI plate MODEL CH-18-B / CHR-18-C |
| 16 | S & F in repair FI plate of size 180 x 15 x 5 mm thick duly painted with Black enamal colour for Hand board pad |
| 17 | S&F in repair PVC hard shoe cap |
| 18 | TABLE COMPUTER MAKE GODREJ MODEL BUDDY / COMPANION |
| 19 | S & F in repair 18 mm thick Prelaminated MDF board exterior grade for top Panel of size 900 x 590 mm of Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Buddy Godrej |
| 20 | S & FPPCP Key board tray for model Buddy Godrej |
| 21 | S & F in repair 18 mm thick Prelaminated MDF board exterior grade for Mouse pad of size 300 x 250 mm with Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Buddy Godrej |
| 22 | M & L to apply one coat of spray paint with Synthetic enamel paint (TA grey / Graphite grey shade) to all painted Steel frame including front Metallic cover sheet model Buddy |
| 23 | S & F in repair 18 mm thick Prelaminated MDF exterior grade Key Board panel of size 780 x 300 mm of Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C1 Godrej |
| 24 | S & F in repair 18 mm thick Prelaminated MDF exterior grade Key Board panel of size 675 X 300 mm of Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C3 Godrej |
| 25 | S & F in reapir 18 mm thick Prelaminated MDF exterior grade Key Board panel of size 750 x 300 mm of Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C2 Godrej |
| 26 | S & F in repair 18 mm thick Prelaminated MDF exterior grade Key Board panel of size 780 x 350 mm of Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C4 Godrej |
| 27 | S & F in repair 18 mm thick Prelaminated MDF exterior grade Key Board panel of size 600x 300 mm of Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C8 Godrej |
| 28 | S & F in repair 100 mm stainless steel handles for drawer / shutter of model Companion C2 / C8 |
| 29 | S & F in repair powder coated (Ivory shade) soft MS channels of 15 inch size (set of two) for Key baordof model Companion C1 / C2 / C3 / C4 / C8 |
| 30 | S & F in repair stainless steel soft channels of 15 inch size (set of two) for Key baord of modelBuddy |
| 31 | S & Fin repair Nylon Castor wheels for understructure of model Companion C1/ C2 / C3 / C4 / C8 |
| 32 | CHAIR REVOLVING MB or HB /CHAIR VISITOR / CHAIR WRITING MODEL : MELUHA, MAKE : METHODEX |
| 33 | S & F in repair super soft PU foam for seat moulded (black colour) with density 32 of size 460 x 460 mm over 12 mm thick commerical hot pressed plywood |
| 34 | S & F in repair breathable form mesh 460 w x 610 H mm+/- 5% variance for back rest of Chair revolving MB |
| 35 | S & F in repair breathable form mesh 460 w x 560 H mm+/- 5% variance for back rest of Chair revolving MB |
| 36 | S & F in repair breathable form mesh 460 w x 700 H mm+/- 5% variance for back rest of Chair revolving HB |
| 37 | S & F in repair of Adjustable PU arm of Arm rest having handle out 590 mm / Handle In 460 mm |
| 38 | S & F in repair push button with spring for Arm rest handles |
| 39 | Taking down including refixing worn out powder coated Slege base with new nickel Bolts |
| 40 | S & F in repair Hydraulic rod for pneumatic height adjustment |
| 41 | S & F in repairTwin wheel castor 50/60 dia |
| 42 | S & F in repair of Nylon bushed to the under structure U shape legs |
| 43 | LOCKER STEEL (DSC) SD-6210/ FD-113 |
| 44 | S & F in repair new CP handles of 100 mm long fixed with srews |
| 45 | S & F in repair new Hasp & staple 75x40x3 mm thick |
| 46 | S & F in repair Al conduit pipe of 20 mm dia of lengh 380 mm |
| 47 | S & F in repair new Al socket fixed to inner sheet as shown in drg to support conduit pipe |
| 48 | S & F in repair new legs made out of 1.5 mm thickMS sheet size 600 (L) x 100 (H) x 100 (W) and fixed with welding for the bottom portion as per existing size and duly painted with two coats of synthetic enamel paint shade over a coat of red /zinc oxide |
| 49 | S & F in repair new MS hinges or U clips 70 / 75mm long duly welded |
| 50 | Removing dented door / shutter (size 1020 x 380 mm)bringing the item to the original shape and refixing the repaired door shutters with suitable hinges |
| 51 | CHAIR REVOLVING HB / MBMAKE-Godrej PCH-7001/7000 |
| 52 | M & L for repair to CHAIR REVOLVING by taking down/removing the existing broken /unserviceable Seat and Back carefully and S & F new seat and back made of PVC sheet as per the existing specifications and fully upholstered by using new 60mm thick 40 density foam sheets and new webbing tape and duly covered with new tapestry cloth of approved colour and texture of rate not less than Rs. 350 per mtr fixed by using heavy duty gun tacker complete all as specified, shown on drawing and as directed. |
| 53 | M & L for repair to CHAIR REVOLVING by removing faded tapsetry clothfrom seat and back of chair carefully after removing the PVC lipping.and fixing new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 250 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker. |
| 54 | M & L for repair to CHAIR REVOLVING by taking down /removing the existing broken /unserviceable Arm Rests of chairand S & F new Arm Rests of same shape and size, made of black integral skin polyurethane with 75-85 shore \"Á\" hardness & reinforced with MS insert complete all as specified, shown on drawing and as directed. (Drg No. TP, MAKE: GODREJ) |
| 55 | M & L for repair to CHAIR REVOLVING by taking down/ removing the existing broken /unserviceable Castor twin wheels and S & F new Castor twin wheel suitable for chair computer complete all as specified, shown on drawing and as directed. (Drg No. TP, MAKE: GODREJ) |
| 56 | M & L for repair to CHAIR REVOLVING by taking down/ removing the existing broken /unserviceable Pedestal assembly, supply and fixing new Pedestal assembly having five arms with twin castor wheels having wheel base not less than 70 cms all as per existing specifications complete all as specified, shown on drawing and as directed. (Drg No. TP, MAKE: GODREJ) |
| 57 | M & L for repair to CHAIR REVOLVING by taking down/ removing the existing broken /unserviceable hydraulic gas list cylinder of chair and S & F new hydraulic gas lift cylinder to chair complete all as per the existing specificationscomplete all as specified, shown on drawing and as directed. (Drg No. TP, MAKE: GODREJ) |
| 58 | M & L for repair to CHAIR REVOLVING by painting to old steel surfaces of each Chair by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding itto make the surface smooth, then wipe out the surface and remove the dust with a fine cloth and applying by spray painting macine, Two coats of synthetic enamel paint as per existing shade after applying and drying one coat of metal primer complete all as specified, directed and shown on drawing. (Drg No. TP, MAKE: GODREJ) |
| 59 | M & L for repair to CHAIR REVOLVING by taking down/ removing the existing damaged/ Torn out leatherite cover from each seat and duly covered with new leatherrite cover of approved colour and texture of rate not less than Rs. 450 per mtr with edging duly machine stichedcomplete all as specified, shown on drawing and as directed. (Drg No. TP, MAKE: GODREJ) |
| 60 | CHAIR WITH DESKLET MAKE-GODREJ,MODEL NO - PCH-7004 |
| 61 | M & L for repair to CHAIR WITH DESKLET by taking down/removing the existing broken /unserviceable Torn out tapsetry cloth, pressed foam cushion, elastic webbing tape from each seat and back and fully upholstered by using new 60mm thick 40 density foam sheets and new webbing tape and duly covered with new tapestry cloth of approved colour and texture of rate not less than Rs. 350 per mtr fixed by using heavy duty gun tacker complete all as specified, shown on drawing and as directed. (Drg No. TP, MAKE: GODREJ, MODEL NO. PCH-7004) |
| 62 | M & L for repair toCHAIR WITH DESKLET by removing faded tapsetry clothfrom seat and back of chair carefully after removing the PVC lipping.and fixing new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 350 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker. |
| 63 | M & L for repair to CHAIR WITH DESKLET by taking down/removing the existing broken /unserviceable hand board of Chair and supply and fixing new hand board made out of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade with 4mm teak wood edging all around the hand board fixed with screwscomplete all as specified, shown on drawing and as directed. (Drg No. TP, MAKE: GODREJ, MODEL NO. PCH-7004) |
| 64 | M & L for repair to CHAIR WITH DESKLET by taking down/removing the existing broken /unserviceable desklet from the chairs carefully and supply and fixing new desklet made of 2mm dia wire as per existing shape and dimension complete all as specified, shown on drawing and as directed. (Drg No. TP, MAKE: GODREJ, MODEL NO. PCH-7004) |
| 65 | M & L for repair to CHAIR WITH DESKLET by painting to old steel surfaces of each Chair by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding itto make the surface smooth, then wipe out the surface and remove the dust with a fine cloth and applying by spray painting macine, Two coats of synthetic enamel paint as per existing shade after applying and drying one coat of metal primer complete all as specified, directed and shown on drawing. (Drg No. TP, MAKE: GODREJ, MODEL NO. PCH-7004) |
| 66 | CHAIR WITH ARMS/WITHOUT ARMS MAKE-GODREJ, MODEL NO - PCH-7003 / 7004 |
| 67 | M & L for repair to CHAIR WITH/WITHOUT ARM by taking down/removing the existing broken /unserviceable Seat and Back carefully and S & F new seat and back made of PVC sheet as per the existing specifications and fully upholstered by using new 60mm thick 40 density foam sheets and new webbing tape,PVC lipping and duly covered with new tapestry cloth of approved colour and texture of rate not less than Rs. 350 per mtr fixed by using heavy duty gun tacker complete all as specified, shown on drawing and as directed. (Drg No. TP, MAKE: GODREJ, MODEL NO. PCH-7003) |
| 68 | M & L for repair to CHAIR WITH/WITHOUT ARM by taking down/removing the existing unserviceable /Torn out tapsetry cloth, elastic webbing tape from each seat and back and duly covered with new tapestry cloth of approved colour and texture of rate not less than Rs. 350 per mtr fixed by using heavy duty gun tacker complete all as specified, shown on drawing and as directed. (Drg No. TP, MAKE: GODREJ, MODEL NO. PCH-7003) |
| 69 | M & L for repair to CHAIR WITH ARM by taking down/removing the existing broken /unserviceable Arm Rests of chairand S & F new Arm Rests of same shape and size, made of black integral skin polyurethane with 75-85 shore \"Á\" hardness & reinforced with MS insert complete all as specified, shown on drawing and as directed. (Drg No. TP, MAKE: GODREJ, MODEL NO. PCH-7003) |
| 70 | M & L for repair to CHAIR WITH/WITHOUT ARM by painting to old steel surfaces of each Chair by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding itto make the surface smooth, then wipe out the surface and remove the dust with a fine cloth and applying by spray painting macine, Two coats of synthetic enamel paint as per existing shade after applying and drying one coat of metal primer complete all as specified, directed and shown on drawing. (Drg No. TP, MAKE: GODREJ, MODEL NO. PCH-7003) |
| 71 | TABLE BED SIDE STEEL ,FD/E6/MAP/15 or 15 (R ) |
| 72 | M & L for Repairs to TABLE BED SIDE STEEL by taking down the existing broken /unserviceable Top and replacing the same with new Table top made of 18mm thick prelaminated MDF board, exterior grade of size 450mm x 450mm with 4mm thick teak wood beading alround its edges duly fixed with suitable wooden screw all as shown on drawing, as specified and as directed.(Drg No. FD/E6/MAP/15 OR 15[R]) |
| 73 | M & L for Repairs to TABLE BED SIDE STEEL by taking down the existing broken /unserviceable Sides and replacing the same with new Sides made of 18mm thick prelaminated MDF board, exterior grade of size 432mm x 450mm fixed with suitable wooden screw all as shown on drawing, as specified and as directed.(Drg No. FD/E6/MAP/15 OR 15[R]) |
| 74 | M & L for Repairs to TABLE BED SIDE STEEL by taking down the existing broken /unserviceable Front Face of upper Drawer and replacing the same with new Front Face of upper Drawer made of 18mm thick prelaminated MDF board, exterior grade of size 374mm x 100mm with 4mm thick teak wood beading alround its edges duly fixed with suitable wooden screw all as shown on drawing, as specified and as directed.(Drg No. FD/E6/MAP/15 OR 15[R]) |
| 75 | M & L for Repairs to TABLE BED SIDE STEEL by taking down the existing broken /unserviceable Sides of upper Drawer and replacing the same in position with new Sides of upper Drawer of 12mm thick plywood, BWR, Grade BB of size 380mmx100mm duly fixed with sides and top with adhesive and headless nail all as shown on drawing, complete all as specified and directed.FD/E6/MAP/15 OR 15[R] |
| 76 | M & L for Repairs to TABLE BED SIDE STEEL by taking down the existing broken /unserviceable Front Face of Lower Drawer and replacing the same with new Front Face of Lower Drawer made of 18mm thick prelaminated MDF board, exterior grade of size 374mm x 332mm with 4mm thick teak wood beading alround its edges duly fixed with suitable wooden screw all as shown on drawing, as specified and as directed.(Drg No. FD/E6/MAP/15 OR 15[R]) |
| 77 | M & L for Repairs to TABLE BED SIDE STEEL by taking down the existing broken /unserviceable Back Top and replacing the same with new Back Top made of 18mm thick prelaminated MDF board, exterior grade of size 374mm x 82mm duly fixed with suitable wooden screw all as shown on drawing, as specified and as directed.(Drg No. FD/E6/MAP/15 OR 15[R]) |
| 78 | M & L for Repairs to TABLE BED SIDE STEEL by taking down the existing broken /unserviceable Back Ply and replacing the same in position with new Back Ply made of 6mm thick Plywood, BWR garde of size 450mm x 450mm, fixed with adhesive and headless nail all as shown on drawing, complete all as specified and directed.(Drg No. FD/E6/MAP/15 OR 15[R]) |
| 79 | S & F in repair 100mm size, Stainless Steel Handle, 8mm dia fixed with internal metal screws, fixed to various type of furniture article complete all as specified and directed. |
| 80 | S & F in Repairs Stainless Steel Telescopic Channel of 12 inch long fixed to bottom of drawer/key board of various furniture articles complete all as per existing size and specification and all as shown on drawing, complete all as specified and directed.(Drg No. FD/E6/MAP/15 OR 15[R], FD/E6/MAP/03) |
| 81 | S & F in repair 50mm dia, Hard Rubber bush, 2 inch high and fixed with MS screws to various type of furniture article complete all as specified, shown on drawing and as directed. |
| 82 | M & L for painting to steel surfaces of TABLE BED SIDE STEEL with two coats of synthetic enamel paint of approved 1st quality by spray machine to match with existing colour/shade after preparation of surfaceand fill uneven surfaces with putty complete all as directed by Engineer-in-charge and as specified. (Drg No. FD/E6/MAP/15 OR 15[R]) |
| 83 | CHARPOY FOLDING IP WITH HARD TOP, FD-388 R |
| 84 | Repair to CHARPOY FOLDING IP WITH HARD TOP byremoving unserviceable FI of any size and supply and fixing new FI of size 20x3 fixed with conduit pipecomplete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD-388 R) |
| 85 | Repair to CHARPOY FOLDING IP WITH HARD TOP byremoving unserviceable wornout gusset plate and supply and fixing newgusset plate of size 120x120x5 mm by weldingcomplete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD-388 R) |
| 86 | Repair to CHARPOY FOLDING IP WITH HARD TOP byremoving unserviceable FI fixed to pipe and supply and fixing new FI of size 225x65x4 mm cut to shape and bent @150 degree connecting legs and fly frame by welding complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD-388 R) |
| 87 | Repair to CHARPOY FOLDING IP WITH HARD TOP byremoving unserviceable FI fixed to pipe and supply and fixing new FI of size 25x6 mm connecting bottom portion of leg and fly frame through welding complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD-388 R) |
| 88 | Repair to CHARPOY FOLDING IP WITH HARD TOP byremoving unserviceable conduit pipe at leg portion and supply and fixing of new MS conduit pipe 25 mm dia 16 gauge of length 150 mm duly welded complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD-388 R) |
| 89 | Repair to CHARPOY FOLDING IP WITH HARD TOP byremoving worn out leg bushes and supply and fixing new PVC bushes complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD-388 R) |
| 90 | Fixing existing 6 mm dia revet loosen washer to attain stability complete all as specified and directed |
| 91 | M & L for Painting the frame of the CHARPOY FOLDING IP WITH HARD TOP with one coat of black tone synthetic enamel paint of approved quality with spray machineafter preparation of steel surface by sanding with sand emery paper and dusting the surface with clean cloth and making smooth by applying metal putty on sketched surfacecomplete all as shown on drawing, as specified and as directed.(Drg No.FD-388 R) |
| 92 | M & L for Repairs to CHARPOY FOLDING IP by taking down the existing broken /unserviceable plywood top and replacing the same with new top made of 8 mm thick BWR Plywood graed-AA of size 1880mmx900mm duly fixed in position nut, bolts and washers, all as shown on drawing, as specified and as directed.(Drg No. FD-388 R) |
| 93 | CHAIR WRITING, FD/E6/MAP/12 |
| 94 | M & L for repair to CHAIR WRITTING by taking down/removing the existing broken /unserviceable Torn out tapsetry cloth, pressed foam cushion, elastic webbing tape from each seat and back and fully upholstered by using new 60mm thick 40 density foam sheets and new webbing tape and duly covered with new tapestry cloth of approved colour and texture of rate not less than Rs. 350 per mtr fixed by using heavy duty gun tacker complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/12) |
| 95 | M & L for repair to CHAIR WRITTING by taking down/removing the existing unserviceable /Torn out tapsetry cloth, elastic webbing tape from each seat and back and duly covered with new tapestry cloth of approved colour and texture of rate not less than Rs. 350 per mtr fixed by using heavy duty gun tacker complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/12) |
| 96 | M & L for repair to CHAIR WRITING by taking down/removing the existing broken /unserviceable Arm Rests of chairand S & F new Arm Rests of same shape and size, made of black integral skin polyurethane with 75-85 shore \"Á\" hardness & reinforced with MS insert complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/12) |
| 97 | M & L for repair to CHAIR WRITING by painting to old steel surfaces of each Chair by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding itto make the surface smooth, then wipe out the surface and remove the dust with a fine cloth and applying by spray painting macine, Two coats of synthetic enamel paint as per existing shade after applying and drying one coat of metal primer complete all as specified, directed and shown on drawing. (Drg No. FD/E6/MAP/12) |
| 98 | CHAIR SCHOOL WITH HAND BOARD(OR DU)FD/E6/MAP/05 |
| 99 | M & L for repair to CHAIR SCHOOL WITH HAND BOARD by taking down/removing the existing broken /unserviceable hand board and supply and fix new hand board made out of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade of size 600x300mm and with 4mm teak wood edging all around the hand boardcomplete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) |
| 100 | M & L for repair to CHAIR SCHOOL WITH HAND BOARD by taking down/removing the existing broken /unserviceable One piece PVC seat and back and supply and fix new One piece PVC seat and back all as per the existing specifications and size complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) |
| 101 | M & L for repair to CHAIR SCHOOL WITH HAND BOARD by taking down/removing the existing broken /unserviceable Foot Rest wire mesh and S & F new Foot Rest wire mesh duly welded to match with existing all as per the existing specifications and size complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) |
| 102 | M & L for repair to CHAIR SCHOOL WITH HAND BOARD by painting to steel surfaces of each Chair by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding itto make the surface smooth, then wipe out the surface and remove the dust with a fine cloth and applying by spray painting macine, Two coats of synthetic enamel paint as per existing shade after applying and drying one coat of metal primer to complete including newly provided parts complete all as specified, directed and shown on drawing. (Drg No. FD/E6/MAP/05) |
| 103 | Supply and fix new PVC shoe suitable to each leg .complete all as directed and as shown on drawing. |
| 104 | TABLE COMPUTER FD/E6/MAP/03 |
| 105 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top of size 900mmx560mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 106 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable Telescopic channel andkey boardofTablecomputer and supply and fix new Telescopic channel and key board of size 400x500mm made out of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 107 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable Mouse pad boardcomplete and supply and fix newmouse pad board of size 220x350mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nailscomplete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 108 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable CPU stand part complete and supply and fix new CPU stand of size 450x300 made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nailscomplete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 109 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable Front of Drawer complete and supply and fix new Front of Drawer of size 100x225mmmade of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 110 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable Bottom of Drawer complete and supply and fix new Bottom of Drawer of size 300x200mmmade of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 111 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable Sides of Drawer complete and supply and fix new Sides of Drawer of size 300x100mmmade of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 112 | S & F in repair40mm dia, drawer CP knobs , bright finishedfixed with screws to various type of furniture articlecomplete all as specified and directed. |
| 113 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable Bottom Shelf complete and supply and fix new Bottom Shelf of size 810x300mmmade of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 114 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable leg buffer complete and supply and fix new nylon leg buffer of size and shape as per the existing one complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 115 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable PVC cover complete and supply and fix new PVC rectangular covermade to shape as per the drawing for bottom frames of size and shape as per the existing one complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 116 | M & L for repair to TABLE COMPUTER by taking down/removing the existing broken /unserviceable Side complete and supply and fix new Side of size 150x610mmmade of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/03) |
| 117 | M & L for repair to TABLE COMPUTER by painting to old steel surfaces of each Chair, filling metal putty to the uneven surfaces and sanding itto make the surface smooth, then wipe out the surface and remove the dust with a fine cloth and applying by spray painting macine, One coats of synthetic enamel paint as per existing shade complete all as specified, directed and shown on drawing. (Drg No. FD/E6/MAP/03) |
| 118 | M & L for preparation of old painted steel surface by scraping out the old paint by applying paint remover solution, with emary paper, filling metal putty to the uneven surfaces and sanding it again to make the surface smooth and then wipe out the surface and remove the all dust etc with a fine cloth and applying spray painting with two coats of synthetic enamel paint of approved quality as per existing shade externally and internally after applying and drying one coat of metal primer complete all as specified and as shown on drawing. (Note: The work will be excecuted at various units locations/residential accn or inside/outside restricted area as per the user\"s requirement) |
| 119 | Locker bedside steel (DSC) (SD-6210/FD-113) |
| 120 | Locker steel 12 units (SK-91) |
| 121 | Locker steel 06 units (FD-127) |
| 122 | Locker steel 04 units(FD-127) |
| 123 | Locker steel 08 units (SK-92) |
| 124 | Rack steel 1.7 x 1.5 x 0.60 \" (SK-84) |
| 125 | Rack steel 1830 x 1905 x 760 (SK-85) |
| 126 | Rack for tarpedo war heads (SK-89) |
| 127 | Rack 6 tier Adj shelf (1905 x 915 x 610 mm) (FD-106) |
| 128 | Rack 3 tier Adj shelf (990 x 915 x 610 mm) (FD-106) |
| 129 | Rack steel Adj shelf (3075 x 900 x 500 mm) (SK-90) |
| 130 | Rack steel size 6\"3\" x 36\" x 18\" with 6 shelf (SK-81) |
| 131 | Rack type A (SK-187) |
| 132 | Stool steel 510 / 600 / 760 mm high ( FD-81) |
| 133 | Steel cabinet 78\"x36\"x19\" with 18 No locker (12\"x12\"x17\") (TP-Allied) |
| 134 | Steel card index cabinet with 4 drawer (TP-Allied) |
| 135 | Stool steel 2\" high Model ST-2 Godrej |
| 136 | Stool steel with cushion and foor rest PCH 42C12 Godrej |
| 137 | Stand for fire extingusher MS angle 45x45x5 of 4\" high (SK-2) |
| 138 | Rack 4 tier 2 unit (FD-129) |
| 139 | Rack 4 tier 1 unit (FD-129) |
| 140 | Table office steel ModelT-8 /T-9/T-101/T-102/T-104/T-111/T-31/T-32(TP-Godrej) |
| 141 | Rack Type A (F-8) |
| 142 | Rack type B (F-9) |
| 143 | Rack side 3 / 4 spaces steel (FD-1023/97(M)) |
| 144 | Rack for riffle steel (F-10) |
| 145 | Dias 4500 x 2100 x 150 (SK-269) |
| 146 | Dias 4500 x 1500 x 300 (SK-270) |
| 147 | Display rack periodical with 20 pegion holes (SK-261) |
| 148 | Display rack periodical with 25 pegion holes (SK-262) |
| 149 | Equipment rack(SK-263) |
| 150 | Hat stand onboard with 24 peg (SK-17) |
| 151 | Key board 36 X 26 mm with double glass door (SK-3) |
| 152 | Key board 80 x 60 cm with glass door (SK-4) |
| 153 | Key board 75 x 60 cm with 30 hooks (SK-5) |
| 154 | Key board 3x2 with glass door (FD-117) |
| 155 | Hat stand with mirror (OTM) (FD-233) |
| 156 | Office honour board 750 x 1200 mm (SK-6) |
| 157 | State Board roll names 1200 x 600 mm (SK-7) |
| 158 | State Board roll names 900 x 600 mm (SK-8) |
| 159 | Stool 610 mm high wooden (F-5) |
| 160 | Magazine rack medium (FD-365) |
| 161 | Workshop bench 1800 x 900 x 760 mm (FD-145) |
| 162 | Workshop bench 1500 x 900 x 760 mm (FD-145) |
| 163 | Table 1520 x 860 x 760 mm (FD-289) |
| 164 | Table 3050 x 1220 x 760 mm (FD-290) |
| 165 | Book shelf open large wooden (DB-3060) |
| 166 | Book shelf open small wooden (DB-3061) |
| 167 | Board notice 5 x 3 or5 x 4 (FD-99) |
| 168 | Workshop bench 3300 x 300 (SK-265) |
| 169 | Workshop bench type A (FD-57) |
| 170 | Workshop bench type B (FD-57) |
| 171 | Workshop bench type C (FD-57) |
| 172 | Workshop bench 2 m x 1 m (SK-211) |
| 173 | Workshop bench 2100 x 300 mm (SK-266 ) |
| 174 | Workshop bench6\"6\" x 2\"6\" x 2\"6\" (GE(P)/65) |
| 175 | Workshop bench 3 m x 1 m (SK-212) |
