Tender For supply of Furniture At Munsiff Court Basohli (G+1)- 1 Overall Size:- Length:1500mm, Width: 750mm, Height: 750mm, Top made of 35 mm thick Pre-laminated MDF Board. PVC edge beading of 2 mm edges by Through Feed Machine. Provision of Cable manager as per L.H. or R.H. side requirement. Cable duct made of 0.8 mm CRCA Sheet. Leg/Side made of 25 mm thick Pre-laminated MDF Board fitted with Aluminium section of size 60X40 with grooving. Leg/Side Base & Top plate with profile cut made of M.S. plate 44 mm width & 4 mm thk with knock down fitting arrangement. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface. Mobile Pedestal unit PLPB- Size: Height:650mm, Width:400mm, Depth:450mm Top made of 18mm thick Post-laminated Ply Board. Side ,back and drawer front are made by 18mm thk. Post-laminated MDF Board. Metallic finish heavy duty handle. Superior quality make front mounted lock. provision of Casters for mobility. Special drawer slides for filing drawer. Other drawers on roller slides. Construction- The product comes in knock-down conditional for ease of transportation.The overall appearance of the product shall be as per photograph. 2 UE 102 Hi-Back- Overall Size - Max/Min. Height-1285/1165mm, Width-690mm, Depth - 700mm, Seat Height640/520mm, Seat Size-W-560mm x D-530mm, Back Size-H-770mm x W-530mm, 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable centre tilt mechanism and with Single piece die castes Nylon arm rest with Cushion. Quality Latherite tapestry with single and double stitch. High density PU cushion. Over all appearance of product as shown in picture. Available in only Black Latherite 3 UE 102 Visitor- Overall Size - Height-1035mm, Width-690mm, Depth-690mm, Seat Height-490mm, Seat Size-W560mm x D-530mm, Back Size-H-640mm x W-530mm, Under Structure cantilever type MS cold rolled close annealed Tube Dia. 32mm x 1.6 mm thick. Hot pressed ply wood with steel T-Nuts for rigid fastening. Single piece die castes Nylon arm rest with Cushion. Quality Latherite tapestry with single and double stitch. High density PU cushion. All steel components should be epoxy powder coated followed by seven tanks anti corrosion treatment of surface. The overall appearance of the product shall be as per photograph. Available in only Black Latherite. 4 Providing & fixing low height storage. Sizes ; 1500LX450Dx900Hmm, ALL UNDERSTRUCTURE WOULD BE 18MM THICK POST LAMINATED PLY. ALL EDGE BANDING PVC . 5 roviding and placement of 3 seater sofa with Overall Size 1860mm(W) 850mm(D) 890(H). Seat Ht 450mm. Handle Ht650mm. Upholstery Material: Premium Quality Pu Cloth/Leatherite. Frame Material : Combination of plywood and pine Wood, Plywood thickness : 12 mm (moisture resistance and termite free). Pinewood cross section - 22x64 mm. Moisture content: 10-12%. Seat Material : 45 mm thick U foam, Density : 32. Super soft 45 mm at top. Dacron 150GSM. Back Material : 32mm thick U foam, Density : 28. 32mm thick U foam, Density : 28. Outer foam 10 mm thick, Density 28. Dacron 150 GSM. Fitted with 75 mm wide elastic belts. S/Zick Zack Spring of dia. 3.8 mm mounted on seat structure using Metal mounting clip. Legs : Prime quality Metal, Ht. 75mm. 6 Providing & Placing centre table of size 1200 x 600 x 450inin(wxdxh). Centre table frame made of 25x25inm thick square pipe with chrome finish. Top and bottom shelf made of thick prelaminatcd particle board of approved quality duly edge banded. 7 Executive Table-70- Overall Size : Table - Lenght-2100mm x Width-900mm x Height-750mm,Side Runner -Width-1200mm x Depth-450mm x Height-750mm,3Drawer Pedestal size- Width-450mm x Depth-540mm x Height-650mm, Table- made of BWR ply wood laminated with good quality mm thk laminate fitted with 25mm thick MDF fascia duly deco painted. Door & drawer front made of 18 mm thk BSLPB. Top of desk and cabinet made of 12mm thk clear float glass. Product must be in compliance with drawing and as per architect instruction Complete product must be knockdown type in construction. 8 Three Seater x 1, Specification- Size- H- 840 mm, L- 1880 mm, D- 815 mm. Structure made of Pine Wood, fitted with 50mm wide rubberized belts 50mm wide with 28 density U foam as per design, Upholstered with premium quality PU cloth/Leatherite with help of stitching, where ever necessary. Handle made of MDF Board With PU Paint. The overall appearance of the product shall be as per photograph. Crystal Sofa - Single Seater x 2 nos, Specification- SizeH- 840 mm, L- 890 mm, D- 815 mm. Structure made of Pine Wood, fitted with 50mm wide rubberized belts 50mm wide with 28 density U foam as per design, Upholstered with premium quality PU cloth/Leatherite with help of stitching, where ever necessary. Handle made of MDF Board With PU Paint. The overall appearance of the product shall be as per photograph 9 Overall size shall be 905 (W) x 448 (D) x 1800 (H). The thickness of angles should be 1.8mm & should be made up of rolled formed construction, free from twist, sharp edges & burrs. The angle should be 40 x 40 mm with thickness of 1.8mm. Angles should have holes provided at a pitch of 19.05mm & should start at 19mm centres from each end. Shelves should be 4 in number of 905mm length & should be bend type made from mild steel sheets not less than 1.00mm thickness. All metal surfaces/parts shall be given antirust treatment & shall be powder coated with epoxy polyester powder. Material shall be supplied in shrink wrap packing to avoid any damage during transit. 10 Compins-main unit- Size: Length:- 900mm, Width:-450mm, Height:-750 mm. Top- Size :- 900x450x18 MM thk. Pre Laminated Particle Board. Side edges covered by 2 mm thick PVC Edge beading by Through Feed Machine.. Under Structure-C- Frame & Tubular cold rolled close annealed Steel Structure. Side frame C - section pressed formed 1 mm thk.CRCA Sheet welded with 25x50x1.2 MM thk pipe. Fabrication involves only MIG welding process. Cable tray - . CRCA sheet 0.8 MM Thk dotted embossed tray. Tie members & Foot rest- Crca section 25x50x1 MM thk.for rigid joint of frame structure. K.B.tray-Metal key board tray with mouse paid Ebco made with Black powder coated. CPU stand-Removable CPU stand with pipe suport 20x20x1.2 with crca C type bkt. CPU top made of 18 mm thk PLPB std.white color with 3 side covered by teakwood flate Rib.. Cap & Levellers- All pipe caps are curved PPCP material. 4 nos of Drum type leveller has been provided at bottom for mentaining level. It also preventing scratches on floor & Product as well. Construction- The product comes in knock-down conditional for ease of transportation. Finish- No sharp edges in the product. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. 11 Yuwa Mesh Low Back- Specification- Size-H:930-1030mm, Seat ht: 460-560mm, D-680mm, W-580 mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Seat Hot pressed ply wood with steel T-Nuts for rigid fastening with PP cover. Back is moulded Bright Bar with stitched Mesh Cloth. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable synchrony tilt mechanism and with Single piece Die castes Fixed PP arm rest . Quality tapestry. High density Moulded PU cushion. 12 PVC Roller Blinds, manually operated, with aluminium tube, chain mechanism, PVC fabric, bottom bar and brackets complete, installed and finished in all respects (Subject to actual measurement) as per the windowS size this is just estimate 13 Durable Construction – Made from premium stainless steel with a black powder-coated finish, ensuring strength, stability, and long-lasting use. Elegant Wooden Hanger – Features a stylish wooden hanger on top, perfect for holding coats, blazers, or jackets without losing shape. Space-Saving Design – Compact dimensions (15 x 50 x 114 cm) 53-70 Inches Height make it ideal for both home and office use without occupying much space. Multi-Purpose Organizer – Perfect for coats, suits, jackets, and scarves – keeps your attire wrinkle-free and ready to wear. Note: As per the standard size 14 Acrylic Table Top Elevator Writing Desk, Size 16x12 , made of 8mm thick premium acrylic, adjustable height & slant design, foldable, portable, rust and corrosion resistant, suitable for laptop, reading, and writing use. 15 Overall Dimention: 2400x1900x760 mm Ht. Top made of Post laminated Ply board with pvc edge beading. Understucture also made up of Post laminated Ply board with pvc edge beading.Top- Size :- 2400x900x36 MM thk. Post Laminated Ply Board. Side edges covered by 2 mm thick PVC Edge beading by Through Feed Machine.Modesty- Modesty made up of 25 MM thk. Post Laminated Ply Board. Open edges covered by 2 mm thick PVC Edge beading by Through Feed Machine.Under Structure- L Shape Side Leg made of 36 MM thk. Post Laminated Ply Board. Skirting made of 25 mm thick PLPB. Top mounted on skirting which provided a clean & finished look. Cable duct made up of 18 mm thick PLPB. Provision of Cable manager as per L.H. or R.H. side requirement. Open edges of Ply board covered by 2 mm thick PVC Edge beading by Through Feed Machine. minated Ply Board. Open edges covered by 2 mm thick PVC Edge beading by Through Feed Machine.Wooden Pedestal- Size: Height:650mm, Width:400mm, Depth:450mm Top made of 18mm thick Post-laminated Ply Board. Side ,back and drawer front are made by 18mm thk. Post-laminated Ply Board. Metallic finish heavy duty handle. Superior quality make front mounted lock. Special drawer slides for filing drawer. Other drawers on roller slides. Cap & Levellers- 12 nos of flat type leveller has been provided at bottom for mentaining level. It also Postventing scratches on floor & Product as well.Construction- The product comes in knock-down conditional for ease of transportation.Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. 16 Overall Size:- Length:1800mm, Width: 900mm, Height: 750mm, Top made of 35 mm thick Pre-laminated MDF Board. PVC edge beading of 2 mm edges by Through Feed Machine. Provision of Cable manager as per L.H. or R.H. side requirement. Cable duct made of 0.8 mm CRCA Sheet. Leg/Side made of 25 mm thick Pre-laminated MDF Board fitted with Aluminium section of size 60X40 with grooving. Leg/Side Base & Top plate with profile cut made of M.S. plate 44 mm width & 4 mm thk with knock down fitting arrangement. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface. Mobile Pedestal unit PLPB- Size: Height:650mm, Width:400mm, Depth:450mm Top made of 18mm thick Post-laminated MDF Side ,back and drawer front are made by 18mm thk. Post-laminated MDF Board. Metallic finish heavy duty handle. Superior quality make front mounted lock. provision of Casters for mobility. Special drawer slides for filing drawer. Other drawers on roller slides. Construction- The product comes in knock-down conditional for ease of transportation.The overall appearance of the product shall be as per photograph. 17 Size: Total Height-1050-1150mm, Depth 600mm, Width-535mm Seat Height:420-520mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable centre tilt mechanism and with Single piece integral skin PU arm rest. Quality tapestry with PVC beading all around. High density Moulded PU cushion. Upholstery 2.0 Mtr. Over all appearance of product as shown in picture. 18 Size: Total Height: 830-930mm, Depth:600mm, Width: 550mm Seat Height: 450-550mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable centre tilt mechanism and with Single piece integral skin PU arm rest. Quality tapestry with PVC beading all around. High density Moulded PU cushion. Upholstery 1.5 Mtr. Over all appearance of product as shown in picture 19 Size: Total Height-850mm, Depth 570mm, Width-550mm Seat Height:440mm. Under Structure cantilever type MS cold rolled close annealed Tube 1.6 mm thick. Hot pressed ply wood with steel T-Nuts for rigid fastening. Single piece integral skin PU arm rest. Quality tapestry. High density PU moulded cushion. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. Upholstery 1.5 Mtr. The overall appearance of the product shall be as per photograph. 20 AL-01- Size:-height:1980mm width:910mm depth:485mm Body part made-up of prime quality cold rolled close annealed Sheet Use only MIG/TIG & Spot welding for fabrication.4 adjustable shelf. Three way locking device with six levers superior quality lock for Door. Doors are mounted on steel hinge brackets. Body 22 Gauge, Door 20 Gauge. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. The overall appearance of the product shall be as per photograph. 21 Fire Resisting Record Protection Cabinet are steel fabricated cabinets which offer protection against fire to paper media such as ledgers, account books, legal documents etc. Standard Height of Fire Resisting Record Protection Cabinet with a tolerance of ± 35mm 1600 millimeter Standard Width of Fire Resisting Record Protection Cabinet with a tolerance of ± 25mm 650 millimeter Standard Depth of Fire Resisting Record Protection Cabinet with a tolerance of ± 25mm 600 millimeter Minimum Height of Pedestal with a tolerance of ± 10mm100 millimeter Fire Resisting Rating of Fire Resisting Record Protection Cabinet 120 MinutesDesignationFR-120X1600, Construction Outer body and inner box shall be fabricated from mild steel or galvanised steel sheets of not less than 0.8 mm nominal thickness. The steel parts shall not have any burrs or dents. If required the outer body shall be suitably stiffened to avoid bulging. The cabinet body of the fire resisting record protection cabinet shall be of double wall type with insulating material filled in-between. The insulating material should not produce toxic gases when the cabinet is exposed to fire situation. The components shall be assembled by bolting, welding, riveting or by any combination of these methods. Outer Body Construction Material Used-Galvanized Steel, Inner Box Construction Material Used-Galvanized Steel Outer Body Material Thickness 1.6 millimeter, Inner Box Material Thickness 1 millimeter Door: The cabinet door is made from mild steel or galvanized steel sheet of not less than 0.8 mm and not more than 2.5 mm nominal thickness and shall be firmly hinged to the cabinet by hinges in such a way that door can be opened upto 180 deg. The door of the fire resisting record protection cabinet shall be of double wall type with insulating material filled inbetween. The insulating material should not produce toxic gases when the cabinet is exposed to fire situation. The components shall be assembled by bolting, welding, riveting or by any combination of these methods. Material used for Cabinet Doors Galvanized Steel Door Material Thickness 1.6 millimeter Locking Mechanism The locking mechanisms of Fire Resisting Record Protection Cabinet is 4 way type. The diameter of shooting bolts are around 15 mm to 20 mm. There shall be minimum three shooting bolts for cabinet height of 1300mm and 1600mm and two shooting bolts for cabinet height of 1000 mm on each side and minimum one vertical shooting bolt each on top and bottom. The shooting bolts slide smoothly in recess and engage in body to a minimum depth of 12 mm. Handles Handle can be fixed or detachable. Handles/handle if provided, shall be made from ferrous (powder coated/plated), non-ferrous material or polymer. Lock:The cabinet is supplied with a dual control key lock having minimum 6 levers with duplicate keys. The keys shall be made of stainless steel or any other non-ferrous metal/alloy having non-corrosive properties. Minimum two sets of the keys 22 Providing and Placing in Position office table OU size 2100mm(L)x 900mm(W)x 750mm(H) having following configurations:-(i) 36mm (hÎCk table top made of post laminated ply board of grade-II, type-ll of approved Shade with the hot melt glue used for fixing the 2mn thimr PVc edge banding. (ÏÏ) Table frame shall be made of prime quality 3 drawers provided on one side (iii). 3 Drawer pedestal is made of 18mM thick ply. 23 Providing & fixing FULL heightstorage. Sizes ; 2400LX450Dx2100Hmm, ALL UNDERSTQUCTURE IWOULD BE 18MM THICK Pre laminated MDF Board . ALL EDGE BANDING PVC . The look should elegant with handle or design specific like trending with new handle design as per standard look . The base of the stoage should be metal base CRCA WITH POWDER COATING OR any other provision of the MDF BOARD WITH SPACE FROM THE FLOOR OR FOOR LEGS OF THE METAL whose stopper or low height legs provision in which we can cleaning easily 24 Providing & fixing FULL heightstorage. Sizes ; 3900LX450Dx2100Hmm, ALL UNDERSTRUCTURE WOULD BE 18MM THICK Pre laminated MDF Board . ALL EDGE BANDING PVC .The look should elegant with handle or design specific like trending with new handle design as per standard look . The base of the stoage should be metal base CRCA WITH POWDER COATING OR any other provision of the MDF BOARD WITH SPACE FROM THE FLOOR OR FOOR LEGS OF THE METAL whose stopper or low height legs provision in which we can cleaning easily 25 Providing & fixing FULL height storage. Sizes ; 21200LX450Dx2100Hmm, ALL UNDERSTRUCTUR E WOULB BE18MM THICK Pre laminated MDF Board . ALL EDGE BANDING PVC .The look should elegant with handle or design specific like trending with new handle design as per standard look . The base of the stoage should be metal base CRCA WITH POWDER COATING OR any other provision of the MDF BOARD WITH SPACE FROM THE FLOOR OR FOOR LEGS OF THE METAL whose stopper or low height legs provision in which we can cleaning easily 26 Providing and placement of 1 seater sofa with Overall Size 740mm(W) 740mm(D) 760(H). Seat Ht 410mm. Handle Ht610mm. Upholstery Material: Premium Quality Pu Cloth/Leatherite. Frame Material : Combination of plywood and pine Wood, Plywood thickness : 12 mm (moisture resistance and termite free). Pinewood cross section - 22x64 mm. Moisture content: 10-12%. Seat Material : 45 mm thick U foam, Density : 32. Super soft 45 mm at top. Dacron 150GSM. Back Material : 45mm thick U foam, Density : 28. Outer foam 5 mm thick, Density 28. Dacron 150 GSM. Fitted with 75 mm wide elastic belts. S/Zick Zack Spring of dia. 3.8 mm mounted on seat structure using Metal mounting clip. Legs : Prime quality Metal, Ht. 150mm. 27 Overall Dimension: 1200 X 600 X 450 H mm • Made up of High Moisture Resistant 25mm Thick Postlaminated MDF Board • One side laminated, Color matching to running Color Scheme. • Edges finished with 2mm self glued hot Postssed PVC Edge Biding by Rehau or equivalent. • Base will be in Trirod Pattern as shown in image • Made up of mild steel round bright bars finished with Powdercoating • Powder coating of all the metal units must be of 70 micron tank process with oven baking coat by polyster powder coating. • Partical – Associate Brand or Equivalent. 28 Visitor - 3 seater benchDimension- Over all sizes- 1835mm X 644mm X 794mm (L X W X H). Seat & Back- 3 individual Perforated seat & back of 500 mm width. Made of 1.2 mm thick MS cold rolled close annealed press formed Sheet components duly seamless welded to get proper finish. . Seat & Back joined together with help of 3 mm thick L-Plate. Under structure- Made up of Oval pipe 75x25x2 mm thick MS Pipe. 3 mm thick MS bracket welded for seat mounting. Handle- Made up of 15x30x1.6 mm thick MS rectangular pipe. PVC Handle cover 350x40x3 mm thick provided on handle for providing more comfort. Cap & Levellers- Oval pipe is covered with 2 nos of specially designed PVC cap. 4 nos of PVC cap & 4 nos of PVC Gromet has been provided at bottom for preventing scratches on floor & Product as well. Construction- The product comes in knock-down conditional for ease of transportation. Finish- All steel components are epoxy powder coated followed by seven tanks anti corrosion pretreatment of surface. The overall appearance of the product shall be as per photograph. 29 Providing & fixing FULL height storage. Sizes ; 11500LX450Dx2100Hmm, ALL UNDERSTRUCTURE WOULD BE Pre laminated MDF Board. 30 Overall Size:- Length:1800mm, Width: 900mm, Height: 750mm, Top made of 35 mm thick Pre-laminated MDF Board. PVC edge beading of 2 mm edges by Through Feed Machine. Provision of Cable manager as per L.H. or R.H. side requirement. Cable duct made of 0.8 mm CRCA Sheet. Leg/Side made of 25 mm thick Pre-laminated MDF Board fitted with Aluminium section of size 60X40 with grooving. Leg/Side Base & Top plate with profile cut made of M.S. plate 44 mm width & 4 mm thk with knock down fitting arrangement. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface. The overall appearance of the product shall be as per photograph. 31 Providing and Placing COMPUTER TABLE table of size. 5400mm(L)x 600mm(W)x 750mm(H) having llowing configurations:-(i) 18mm thick table top made of post aminated ply board of grade-II, type-II of approved shade with the not melt glue used for fixing the 2mm thick PVC edge banding (ii) Table frame shall be made of prime quality 3 drawers provided on one side (iii). BETWEEN TWO PERSON ONE PEDESTAL (SHARING) 3 Drawer pedestal is made of 18mm thick ply. PROVIDING AND FIXING TABLE FRNT SIDE 45MM THICK PARTITION FOR SCREEN FABRIC & WHITE BOARD , PARTITON HEIGHT 1200MM. 6 PERSON 32 Providing and Placing COMPUTER TABLE table of size. 4800mm(L)x 600mm(W)x 750mm(H) having llowing configurations:-(i) 18mm thick table top made of post aminated ply board of grade-II, type-II of approved shade with the not melt glue used for fixing the 2mm thick PVC edge banding (ii) Table frame shall be made of prime quality 3 drawers provided on one side (iii). BETWEEN TWO PERSON ONE PEDESTAL (SHARING) 3 Drawer pedestal is made of 18mm thick ply. PROVIDING AND FIXING TABLE FRNT SIDE 45MM THICK PARTITION FOR SCREEN FABRIC & WHITE BOARD , PARTITON HEIGHT 1200MM. 5 PERSON 33 Providing and Placing COMPUTER TABLE table of size. 1800mm(L)x 600mm(W)x 750mm(H) having llowing configurations:-(i) 18mm thick table top made of post aminated ply board of grade-II, type-II of approved shade with the not melt glue used for fixing the 2mm thick PVC edge banding (ii) Table frame shall be made of prime quality 3 drawers provided on one side (iii). BETWEEN TWO PERSON ONE PEDESTAL (SHARING) 3 Drawer pedestal is made of 18mm thick ply. PROVIDING AND FIXING TABLE FRNT SIDE 45MM THICK PARTITION FOR SCREEN FABRIC & WHITE BOARD , PARTITON HEIGHT 1200MM. 2 PERSON 34 Meeting table Overall Size- Length-1800mm, Width-1200mm, Height-750mm, Top made thick 25mm thick Pre-laminated MDF Board, Legs made of 25mm thick Pre-laminated MDF Board. Front Modestry Panel 18mm thick Pre-laminated MDF Board. All edges made of 2mm thick PVC edge bend. Over all appearance of product as shown in picture. 35 Overall Size:- Length:1800mm, Width: 900mm, Height: 750mm, Top made of 35 mm thick Pre-laminated MDF Board. PVC edge beading of 2 mm edges by Through Feed Machine. Provision of Cable manager as per L.H. or R.H. side requirement. Cable duct made of 0.8 mm CRCA Sheet. Leg/Side made of 25 mm thick Pre-laminated MDF Board fitted with Aluminium section of size 60X40 with grooving. Leg/Side Base & Top plate with profile cut made of M.S. plate 44 mm width & 4 mm thk with knock down fitting arrangement. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface. The overall appearance of the product shall be as per photograph. 36 Table Overall Dimensions:-Round top Ø900 mm / Square top 1200 X 1200- Height: 750 mm.Tabletop:- Material: 25mm Thick Pre-Laminated MDF Board (PL-MDF)- Edge: Covered with 2mm Thick Edge Banding.Leg: Square tube 75 x 75 x 1.6 mm thick round CRCA tube for sturdy support.Top Plate: 2.5 mm thick CRCA plate with precise forming for stability.Base Plate: 8 mm thick MS plate equipped with levelers for balance.Connection Mechanism: Top and base plate connected using M12 stud for secure assembly with specially design injection mouldedplastic bracket..Product comes with knock down coinstruction for easy transportation.Finish: All metal components are epoxy powder-coated after seven-tank anti-corrosion treatment for enhanced durability 37 UE 102 Low Back- Overall Size - Max/Min. Height-1165/1045mm, Width-690mm, Depth - 700mm, Seat Height640/520mm, Seat Size-W-560mm x D-530mm, Back Size-H-640mm x W-530mm, 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable centre tilt mechanism and with Single piece die castes Nylon arm rest with Cushion. Quality Latherite tapestry with Single and double stitch. High density PU cushion. Over all appearance of product as shown in picture. Available in only Black Latherite. 38 Metal Table for Canteen Room Size-1200x1200x750mm Legs- 40mm x 40mm metal legs, Table top 18mm thick Ply Laminate Finish, Metal legs would be Powder Coated, 4 Person 39 The overall size of dinning chair shall be 520mm (B) x 550mm(D) x 840mm total height x 450mm sear height. The seat and back are made of injectionmoulded high impact strength polypropylene polymer compound with indoor grade UV Resistance. The Powder coated (DFT50+ microns) welled tubularframe is made from 2.22 + 0.03 cm x 0.16+/- 0.0128cm and 3.5+/- 0.03cmx1.5+/-0.03 cm x 0.16 +/- 0.0128 cm M.S.E.R.W tube. The Shoes are made of high impact strength polypropylene polymer compound with indoorgrad UV Resistance and pressed fitted with tubular frame. 40 Cafeteria Bench Size-L-2100xD-750x H-900mm, Understructure Would be Stainless steel 202 Grade Legs would be 25x25 ss Finish 41 Table 3600x1200x750mm, Top 36mm thick Pre laminated MDF Board , Understructure 25mm thick Pre laminated MDF Board . 10 Seater 42 Conference Table L-12900mm, W-1800mm, H-750mm, Top and legs 36mm thick Post laminate ply and Front modesty panel-25mm thick Pre laminated MDF Board. 43 Overall Size:- Length:1200mm, Width: 600mm, Height: 750mm, Top made of 25mm thick Pre-laminated MDF Board. PVC edge beading of 2 mm edges by Through Feed Machine. Provision of Cable manager as per L.H. or R.H. side requirement. Cable duct made of 0.8 mm CRCA Sheet. Leg/Side made of 25 mm thick Pre-laminated MDF Board fitted with Aluminium section of size 60X40 with grooving. Leg/Side Base & Top plate with profile cut made of M.S. plate 44 mm width & 4 mm thk with knock down fitting arrangement. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface. The overall appearance of the product shall be as per photograph. 44 Providing and Placing in Position office table Of size 1500mm(L)x 750mm(W)x 750mm(H) having following configurations:-(i) 18mm thick table top made of post laminated ply board of grade-II, type-II of approved shade with the hot melt glue used for fixing the 2mm thiCk PVC edge banding. (ii) Table frame shall be made of prime quality 3 drawersprovided on one side (iii). 3 Drawer pedestal is made of 18mm thigh ply 45 Wheelchair made of MS Frame, 24 Mag Wheels, Removable Footrests, Foldable Design, Comfortable Rexine Seat, Supports up to 100 kg, Self-Propelled and Attendant Use, Dimensions 101D x 65W x 86H cm, color - Black Tolerence shoiuld be 10mm +/- 46 Visitor - 3 seater- Over all sizes- 1765mm X 710mm X 775mm (L X W X H). 3- Seater visitor bench with 3 individual seats of 450 mm. width.Made of MS cold rolled close annealed press formed Sheet components duly seamless welded to get proper finish. Steel perforated MS moulded one piece seat and back fitted in moulded chrome plated side strips. three individual seats fitted on MS tube support of 75mm x 35mm. seat and bottom support are Powder coated. The open- ends of the pipes will be covered& finished. All joints will be properly welded & finished. The whole structure including seats are powder- coated. Appearance as per attached photograph. Please Enable Macros to View BoQ information
