Tender For Provision Of Office Complex And Store Rooms For One Battalion And Addition Cum Special Repair To Training Infrastructure And Allied Facility For Officer Cadets Including Lady Cadets At Ima Dehradun, Dehradun-Uttarakhand

TDR : 52589901

Tender Notice
Corrigendum Details
BOQ

12 Days Left

Dehradun , Uttarakhand

Tender Brief : Corrigendum : Tender For Provision Of Office Complex And Store Rooms For One Battalion And Addition Cum Special Repair To Training Infrastructure And Allied Facility For Officer Cadets Including Lady Cadets At Ima Dehradun

Document Fees
₹ 3000 /-

EMD
₹ 1510000.0 /-

Tender Value
₹ 23.70 Crore /-

Submission Date
28-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	13-01-2026	Amendment to Date 13.01.26	Date	28-01-2026
2	06-01-2026	Amendment to Date	Date	21-01-2026
3	30-12-2025	Amendment to Date 30.12.25	Date	14-01-2026
4	23-12-2025	Amendment to Date 23.12.25	Date	07-01-2026

Name of Work: PROVN OF OFFICE COMPLEX AND STORE ROOMS FOR ONE BATTALION AND ADDITION CUM SPECIAL REPAIR TO TRAINING INFRASTRUCTURE AND ALLIED FACILITY FOR OFFICER CADETS INCLUDING LADY CADETS AT IMA DEHRADOON.

Sl. No.	Item Description
1	Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed
2	Demolition of cement concrete in any position not otherwise specified
3	M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection /hardstanding , laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed
4	M/L 40 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring using extra cement finished even and smooth complete all as specified and directed
5	M&Lforhardcore gauge exc 63 mm but not exc 100 mm broken stone or boulders, deposited, spread, watered and rolled/rammed to a true surfacecomplete all as specified and directed.
6	Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed
7	M&L for Precast RCC Slabs M-25 (20mm graded aggregate) set in CM 1:4 CM complete in all as specified and directed by Engr- in- Charge.
8	M&L for RCC M-25 (Using 20mm graded crushed stone aggregate) as in slabs, shelves and the like all as specified.
9	M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete in all as specified and directed
10	Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for fair finished surfaces (Horizontal or sloping) complete all as specified and directed
11	Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed
12	M&L brick work with sub class \"B\" old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed
13	M&L for half brick work with subclass ‘B’ bricks, straight or curved on plan to any radius built in CM 1:4 complete all as specified and directed
14	S&F in repair Fibrette Tile of \"Wood fiber Cement Composite \"1mm width wood fiber 15 mmmm thick of size 600x600/ 600x1200mm having excellent noise absorption of 1 NRC as per ISO: 354, Density 400 Kg/ m3, meets Fire Ratings as per BS 476 Part 5,6 and 7 class 1 and P, water resistant and thermal insulated. Installed on G.I studs 600x600mm center to center 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dippedgalvanized steel with 120GSM zinc coating with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results in ceiling.
15	S&F in repair stage wall side and stage ceiling with magnesite bonded wood bonded panels ofwith superfine wood fibres & gypsum,patented with magnesite cement, edge profiles consist of Natural standard Square edge, having density 400kg/m3, Acoustic NRC upto 0.85, eco- friendly, Fire Ratings - Non-combustibility At 750 o C, Thermal Resistance, Water Vapour Diffusion Resistant, size 600 x 600/ 1200/ 2400 x 20 mm installed on GI frame-system requires unfastening and refastening of fasteners if required and tiles will be screwed with screws. GI metal frame of 50 x 50mm making a grid of 600 x 600mm c/c. The frame is to be made in\"proper line after leveling. The C-System framework consisting of Channels fixed at 600mm centres, Long edges chamfer and kerfed for H-Spline; total thickness of system will be 70mmfrom the wall.Work complete all as specified and directed.
16	S&F in repair of2.4m ht ofWOODEN GROOVED ACOUSTICAL PANEL FOR WALL. Wood Based panels with lineal perforations. The panels shall be Non FR grade with melamine laminate panels 2440mm x 128mm x15mm with 2mm slats at 15 mm pitch, Toungue and Groove edges for seamless mounting. The back of the panels fixed wtih acoustical fleece for Sound Absorption. Panel is to be fixed on Dexune framework with screw fixed horizontal or vertical to wall at every 600mm with centre & edge bracket in tongue & groove system on framework. The cavity of framework should be inserted with rock wool with 24 kg density and 25mm thickness;alongwith all. The panelling should be properly done in proper alignment and level as per satisfaction engineer in charge all complete for all height and level.Work complete in all as specified anddirected
17	S&F in repair accoustical wall panelsSystem on Magnesite Bonded Fibrecrete Acoustic Panel 15mm thick 1220 x 610mm Natural Standard ND40 Screw fixed @ 200mm on GI batten frame of 50 x 35mm making a grid of 610 x 610mm c/c. The frame is to be made in proper line after leveling. The panels will be backed with Rockwool 50mm thick 96 kg density inserted inside the grid of 610 x 610mm. The panel should meet the stringent fire test required having Class ‘P’ rating for Ignitability test as per BS 476 part 5 and Class ‘1’ rating as per BS 476 part 7 for Surface Spread of Flame test. Class ‘P’ and Class ‘1’ are the highest rating. BS 476 part 6 Fire Propagation index, I = not greater than 4.11 and all specified and direcet by Engr-in-Charge
18	S&F Stage Proescinium: to be fabricated on site made with 48X36mm soft wood (partal/kail) Batten frame. infill in 48mm thick 40kg/cum density Rock wool insulation padding. fixing on 12mm Water Proof Ply. Finishing with 0.8mm sun mica Make with Merino Laminate. Fixing with Fevicol adesive. & With Acriylic Sheets Cove Design.Work complete in all as specified directed by Engineer in Charge over front wall.
19	S&F in repairStage Wooden Flooring: Acoustical Wooden Stage Flooring Compatible with Underground signal cabling and Pop-Up Boxes: S&F 75 X 22 thick in random length, 1st class teak wood INTER LOCKING planks flooring with tongue and groove joints on a layer of 19 mm thick BWR grade ply of approved make and manufacture, fixed to hardwood joint 50X 50 mm at 600 mm c/c in one direction and 60 X 50 mm Sal battens 600mm c/c on other direction, Hardwood joint resiliently supported on 100 X 100 mm Rubber Pads, the framework to be filled with 50mm thick Insulation Wool resin bonded insulation of density 24kg/cum. PU polishing of teakwood on the exposed surface: In horizontal/vertical plane (rate for flooring shall include providing additional framework required for housing microphone and power outlet junction - signal & Popup Stage boxes, If required S&F hinged 18mm thick teakwood cover for the junction boxes.Work complete in all Respect.
20	S&F in repairAcoustical sound reducing Doors of size 1.7X3.35m, Leaf of the acoustic wooden door is made up of an acoustic sandwich panel core, hardwood or marine plywood structure with stripping in the recesses and on the bottom, surfaced on both sides with 2.5mm thick high-pressure laminate in the desired veneer over MDF board. The core of the door is made up of a sandwich panel of different materials in order to achieve good sound refraction and therefore good acoustic performance.The door to be fabricated with 12mm thick commercial ply (Green/so near or equivalent make) veneer facing and finished with varnish on both sides. wooden framework filled with Insulation wool with one layer of 80mm thick. 24.Kg.Cu.M density insulation wool. The insulation should be supported with wooden batten of kail wood framework minimum 610mm x 610mm to avoid sagging. The door leaf will be fabricated using 90mm X 70mm thick. Teakwood frame. The fixed door frame (chowkhat) shall be teakwood of size 150mm X 80mm. The door will have a hydraulic door closer, crossbar door handle and relevant hardware for fabrication and fixing. Complete with the requisite door frame and magnetic and rubberized door seals all around of the door frame or as per specification, drawing, and as per the instructions of Engineer-in- Charge. the door to be attached with the door frame by SS ball bearing hinges with adequate strength and numbers to avoid sagging All joints to be sealed with Dow Corning 790 or equivalent mastic Sealant.The doors on the auditorium side to be finished using non-light reflective media like a carpet of dull laminate /veneer.Work complete in all as specified and directed bt Engr in Charge
21	S&F in repair CNC Design Cutting HDHMR Board: 12mm cnc design cutting high denstity high moisture resistance primum board with back fixing of 40% light transmission white acrylic sheet. Hard wood used for higher density of product special glue being used to make it water resistant product as per indian climate water resistance characteristics as per ISI standred ideal routable substrate with sharp cut & routed edge ready & smooth surface which absorbs less paint in painting process thus saves paint cost also easy workibililty cost effective paneling solution and backing design covered with moolight white acrylic sheet matte finish. Work complete in all as specified and directed by Engr in Charge.
22	S&F in repair of auditorium chairs specifiedall as specified and directed by Engr in Charge
23	S&F in repair Stage finishing items as under : The stage is 15.00 meter wide at front and 15 meter at the back. It will have centre opening motorized main curtains, mid curtains, rear curtains, side wings and ceiling curtains (Frills) to cover the light fittings. All these items will be considered as one lot. The height of curtain is approximately 4 meter.1. Main motorized curtain assembly - 3 No• 15000 mm in two parts with 900mm (min) overlap when close and should be stitched into double gathering with masking frills.• Guide rails made of 1”x1” MS angle or pipe• Curtain Carriers: Standard carriers of plated steel with a pair of neoprene wheels riveted parallel to body. Equip carriers with plated-steel swivel eye for attaching curtain snap or S-hook. Provide quantity of curtain carriers sufficient for track length, to suit curtain fabrication.• Master Curtain Carriers: One master carrier, for each leading curtain edge, of plated steel with two pairs of neoprene wheels and with two line clamps per carrier.
24	• End Pulleys and Floor Block: One dead-end, single-wheel pulley; one live-end,Double-wheel pulley; and one adjustable, floor block containing guarded ball bearing sheaves enclosed in steel housings.• 4 mm steel rope for movement.• Limit Switches: Fully closed and fully opened preset stops (mounted on drumassembly).
25	S&F in repairwhite Wall Hung WC with UF soft close slim seat cover (SKU: LYS-WHT-38951UFSM) of approved shape (size: Size:360x500x380 mm) including S&F vitreous china concealed cistern (SKU:JCS-WHT-2400S) withduel flush fitting, of flushing capacity 3 litre/6litre and adjustable 2litre/4 Litre including seat cover, and cistern fitting, nuts, boltsand gasket ,etc complete
26	S&F in repair white vitreous china powered by 220 volt AC Model based infrared sensor operated urinal of (Size: 480x300x740mm) approx. having Flow rate at 45 psi ≤ 2.5 lpm with concealed urinal sensor (SKU: SNR-CHR-5109), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge
27	S&F in repair Wash basin vanity in white color for over counter mounting (Size:420x420x140 mm), s dia CP waste and connections pipe 450mm / 600mm long braided hose with nipple, nut, oring and rubber washer etc complete. with C.P. wall flange and rubber adopter for waste connection, complete including cutting and making good the walls, wherever required, complete all as specified and directed.
28	S&Fin repairBlush Tall Boy Deck Mounted Sensor faucet with Control Box (SKU: SNR-CHR-51449) (Battery Operated) complete including cutting and making good the walls where required, complete all as specified and directed.
29	S&F in repair wall mounted CP Soap dispenser with metallic bottleetc complete in all respects, complete all as specified and directed.
30	S&F in repairhand shower (Health faucet) Flow rate at 45 psi ≤ 6 lpm with 1mtr long Easy Flex Tube in chrome finish and wall hook, complete all as specified and directed.
31	S&Fin repair Toilet Paper Holder with flap complete including cutting holes in wall and making good the wall wherever required, complete all as specified and directed.
32	S&F in repairtowel rail single towel rail 600mm long including fixing of brackets with CP screws with concealed fitting arrangement of approved quality and colour, complete all as specified and directed.
33	S&Fin repair first quality bottle trap (with internal partition) Bottle Trap (with Internal Partition) 32mm Size with 250mm & 190mm Long Wall Connection Pipes & Wall Flange etc complete in all respect as per site, complete all as specified and directed.
34	S&Fin repair of cp brass color soap dish of approved design, complete all as specified and directed.
35	S&F in repair solid state no touch operating fully highgenic SS hand drier of best quality, to be operated with 230 volts, single phase, with fully hygienic condition, with all accessories including cutting and making good the walls, wherever required, complete all as specified and directed.
36	M&L powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) inclpowder coating of any colour (Thickness or powder coating not less than 50 micron).complete all as specified and directed.
37	M&L powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.incl Powder Coating (minimum thickness of powder coating 50 micron) ® complete all as specified and directed.
38	S&F premium quality Manually operated Roller blinds with Solar protection fabric of high tenacity Polyester Yarn with PVC Coating & Grey Backing, & offer 100% blackout / heat radiance. Fabric shall have GREENGUARD-Weight: 310 to 500 g/m2 (+/-5%), Thickness: 0.47 to 0.55 mm (+/-5%), Fabric Openness Factor: 0%, Tensile Strength (Warp/Weft): 160/170 daN / 5cm, Tearing Strength (Warp/Weft): 11/13 daN, Solar Transmission- 0%, Solar Reflectance 25-69%, Solar Absorption 28-31%, Fungistatic Treatment: Degree 0, Excellent (EN ISO 846-A). Roller Tube shall be of extruded Aluminum alloy 38mm O.D (or as per system dimension) with a minimum wall thickness of 1.0mm duly anodized for long life. Clutch shall be wrap spring design with high strength fiberglass reinforced polyester assembly and high carbon steel springs to transmit motion from driving to driven members of clutch mechanism. complete in all as specified and directed bt Engr in Charge
39	S&Fin repairvitreous Chinawash hand basin, ofsize 550x400mm, CP brass waste coupling, 450 mm long HDPEPVC connection, 750 mm long 32mmbore HDPE waste down pipe including CI brackets complete all as specified and directed.
40	S&F as in repair Bevelled edge mirror frame less of selected quality of size 600 mm x 450 mm fixed with 4 nos SS studs etc complete all as specified and as directed
41	S&F in repairtubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed
42	S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed.
43	S&F in repairfancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.
44	S&F in repair mirror of size 1800 mm x 1200 mm x 6 mm thk., to be pasted on 6 mm thk ply as base, to be fixed with SS studs, complete all as specified and directed.
45	S&Ffrosted toughened glass partitions size 450 mm x 1000 mm x 6 mm thk., to be fixed with SS hardware. The edge of glass to be 4 mm chamfered both sides.
46	S&F in repair as 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck , chromium plated, screwed down high pressure, with or without lettered `Hot\" or `Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixedall as specified and as directed
47	S&Fin repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as speciied and directed.
48	S&F in repair in bib tap 15 mm long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed
49	S &F in repairvitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) all as specified and directed
50	S&F in repair PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed.
51	S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm,all complete as directed .
52	S&F in repairPVC connections 15mm size with PTMT nuts of length 600mm,all complete as directed .
53	Supply and fixed in repair CP grating 100mm dia and with or without hole complete all as specified and directed.
54	Supply and fixed in repair CP waste coupling 32 MM dia with fly nutssuitable for wash hand basin as direted.
55	S &F in repair of Vitreous China urinals, bowl type (back or corner wall type) in repair ,complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)complete all as specified and directed.
56	Dismantling plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
57	Dismantling plain or corrugated Asbestos cement (corrugated, semicorrugated, etc.) sheets in roofcoverings complete all as specified and directed.
58	S&F Pre- painted galvalumealuminum zinc coating GIbased corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified complete all as specified and directed Note:- The work shall be carried out in roof of triple storey bulding
59	S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
60	Dismantling timber scantling 40 sq cm and over in section , in any position for unframed work complete all as specified and directed by Engr-in-Charge
61	Dismantling timber scantling 40 sq cm and over in section , in any position for framed work complete all as specified and directed by Engr-in-Charge
62	S & F of 2nd class hard woodin scantling, clean sawn in any position and any description as in unframed work completeall as specified and directed.
63	Dismantling Mild Steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge
64	S&F MSjoist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section MS tubes, flats square bars etc as in roof trusses (framed) , trussed purlins, crane gantries , rails and fastening and heavy brackets framing inclusing distance pieces, cleats etc confirming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed by Engr-in-Charge
65	M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paintetc complete all as specified and as directed
66	S&F,in repairs,Wash down water closet , complete Vitreous China wash down water closet pan (pedestal pattern), Single Piece With Side Flush Cistern For Couple805mm mm,P Trap- 180 mm white, including flush pipe andfixing bolts etc all complete as directed .
67	Supply and fixed in repairs vitreouschina WHB whitetable top Basin With Fixing Accessories, Size: 595x435x185 mm on the plateform, complete all as specified and as directed .
68	S&F in repairs Overhead Shower ø105mm Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated)Rubit Cleaning Systemand shower arm with flange, all complete as specified and directed.
69	S&F in repair two way bib cock 15mm bore with wall flange complete all as specified and as directed
70	Supply and fixed in repairs CP angle with flange cock 15mm dia complete all as specified and as directed
71	Supply and fixed in repairs CPcentre hole basin mixer without Popup Waste System with 450mm Long Braided Hoses 15 mm bore for WHB,complete all as specified and as directed
72	Supply and fixed in repairs hot & cold 15mm diaWall Mixer with Provision For Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges complete all as specified and as directed
73	Supply and fixed in repairs Toilet Roll Holder with Stainless Steel Flapall completeas directed.
74	Supply and fixed in repairscorner Glass Shelf with Brackets complete all as specified and as directed
75	S&Fin repairs, for provn Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1. metre long easy flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
76	S&F in repair Towel Rack 600mm Long Without Lower Hangers but with 3 hooks, Stainless Steel
77	S&F Tata Parvash/Shakti Horman/JSW doors complete incl frame, shutter, flyproof shutter and fittings complate for vearndah :- Door Frames (Conform to IS4351: 2003) and Leaves are made from Skin Pass Galvanized Iron Sheet (Conform to IS277) with high quality zinc coating of 120 GSM with under mention specification.(i) Door Levels:- Constructed from 0.8 mm (22 SWG) thick Skin pass Galvanized Iron Sheet (Conform to IS 277) formed to provide a 46mm thick fully flush, double skin door shell with Lock Seam joints at stile edges. In-fill of Honeycomb Kraft Paperis used to give the required rigidity and effective acoustic insulation.(ii)DOOR FRAMES :- Constructed from 1.2 mm (18 SWG) thick Skin pass Galvanized Iron sheet (Conform to IS 277) formed to Double rebate profile as perspecifications. The Door Frames may be built into the brick or block walls using corrugated “TEE” anchors not welded to the Frames (First fix). Frames may also be fixed on plastered openings with the help of Anchor Fasteners (Second Fix). Door Frames are supplied to knockdown/welded form with butt joints for Bolted Assembly at site
78	FINISH :-The door frames and door shutters are primed with zinc- phosphate stoving primer and finished with Pure polyester / polyurethane powder/Epoxy Polyster for thickness 60 – 65 microns (Dry film thickness). RAL Powder is specifically procured from JOTUN/Reputed Brands. Fittings:- Shutter shall be provided with all SS fittings such as hinges 100 mm ,tower bolt 200 mm , handles 150 mm,sliding bolt 300 mmand hydraulic door closer for fly proof shutter
79	S&F Tata Parvash/Shakti HOrman/JSW doors complate incl frame, shutter, and fittings complate for corridor :- Door Frames (Conform to IS4351: 2003) and Leaves are made from Skin Pass Galvanized Iron Sheet (Conform to IS277) with high quality zinc coating of 120GSM with under mention specification.(i) Door Levels:- Constructed from 0.8 mm (22 SWG) thick Skin pass Galvanized Iron Sheet (Conform to IS 277) formed to provide a 46mm thick fully flush, double skin door shell with Lock Seam joints at stile edges. In-fill of Honeycomb Kraft Paperis used to give the required rigidity and effective acoustic insulation(ii)DOOR FRAMES :- Constructed from 1.2 mm (18 SWG) thick Skin pass Galvanized Iron sheet (Conform to IS 277) formed to single rebate / Double rebate profile as per your specifications. The Door Frames may be built into the brick or block walls using corrugated “TEE” anchors not welded to the Frames (First fix). Frames may also be fixed on plastered openings with the help of Anchor Fasteners (Second Fix). Door Frames are supplied to knockdown/welded form with butt joints for Bolted Assembly at site
80	FINISH :-The door frames and door shutters are primed with zinc- phosphate stoving primer and finished with Pure polyester / polyurethane powder/Epoxy Polyster for thickness 60 – 65 microns (Dry film thickness). RAL Powder is specifically procured from JOTUN/Reputed Brands. Fittings:- Shutter shall be provided with all SS fittings such as hinges 100 mm ,tower bolt 200 mm , handles 150 mm,sliding bolt 300 mm
81	S & Fin repair Hettiach steel silver 22 mm thick of suitable size closinghinges complete all as specified and directed.
82	M &L 600 x 600 x 10 mm thick exterior tile polished, multicolour approved shade as in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match including laid over 15 mm thick bedding layer of Cm 1:4 complete all as specified and directed
83	M & L for providing extra reinforcement with TMT bars 10mm dia and over as per site requirementincludingcranking, bending spirally for hoping for columns, hooking ends incl welding & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed on specific location.
84	M&Lfor providing, mixing & applying two component Epoxy resin concrete bonding coat on existing detoriated RCC surfaces as per manufacture specification including preparation of surface complete all as specified and directed
85	M&L for providing and fixing water tight centering and shuttering including bolting, strutting, propping etc. including removal of form work from column, beam etc complete all as specified and directed.
86	M&L for supply and apply a ready to use non shrink, cementitious free flow micro concrete up to thickness of 75mm complete all as specified and directed.
87	M&L for supply and apply a polymer modified cementitious bond coat, ratio polymer : water : cement of 1:4:6 by weight. Apply the patching mortar when the bond coat is tacky complete all as specified and directed.
88	Providing & fixing shear connectors of 8mm dia TOR steel up to 160mm length with anchor Fix ®-3+ / Mungo / Flscher FISV 390 / Hilti RE - 500 Epoxy resin RCC members including power drilling, Cleaning of holes insertion of epoxy, placing shear connectors in position to insure the bond as per manufacture recommendation complete as per site requirement and directed.
89	M&L Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including rilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete as specified anddirected.
90	M&L Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete as specified anddirected.
91	M&L Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5tre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete as specified anddirected.
92	S&F in repair stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement. Height of railing min 120 cm, vertical post of dia not less than 65 mm with ornamental top, at the interval of not more than 1.2 m, top rail 65 mm dia and middle rails min 2 Nos. not less than 25 mm dia, pattern all as approved by GE complete all as specified and directed.
93	M&L 100 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in hard standing, complete as specified anddirected.
94	S&F in repair 40mm dia stainless steel (Grade 304)made of Hollow tubes, including welding, grinding, buffing, polishingall as approved by GE complete all as specified and directed.
95	S&F in repair 40mm dia stainless steel (Grade 304)knobs/caps made of Hollow tubes, including welding, grinding, buffing, polishingall as approved by GE complete all as specified and directed.
96	S&F in repair 20mm dia stainless steel (Grade 304)made of Hollow tubes, including welding, grinding, buffing, polishingall as approved by GE complete all as specified and directed.
97	S&F in repair 20mm dia stainless steel (Grade 304)Hollow tubes knob/cap, including welding, grinding, buffing, polishingall as approved by GE complete all as specified and directed.
98	S&F in repair 450mm stainless steel normal Telescopic channel for drawer sliding, complete as specified anddirected.
99	Providing precast cement concrete louvres and jallies Type B0 1:2:4 (12.5mm (12.5mmgraded graded graded graded aggregate), 50mm thick (mea sured solid) Set in cement mortar Set in cement mortar 1:4, including all mould- ings but excluding frame including desmentaling existing jali, complete as specified anddirected.
100	M&L 12mm thick toughened glass frameless doorswith locking arrangement including stainless steel corners/brackets, cutting, polishing and bevelling all around , making holes for fixing of handles etc all complete as specified anddirected.
101	M&L in repairDouble action door spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box ,main body with staineless steelcover, governing pivot made of brass , other parts made of mild steel heavy duty and fixed complete all as directed.
102	M&L for 300 mm long stainless steel handle fixed to glass door all as specified & directed.
103	S&F,Aluminium powder coatedsection of any size like angle for jointing cleats etc all complete as specified and directed.
104	S&F for 5.5mm thick sheet glass, ordinary quality and glazing with rubber gasket and aluminium glazing clips, area in square n exc 0.5 Sqm in each pane . Note: Rubber gasket and glazing clips shall be measured and paid separately.
105	S&F for 5.0mm thick Figured glass, pin head type and glazing with rubber gasket and aluminium glazing clips, areain square n exc 0.5 sq. m in each pane.Note: Rubber gasket and glazing clips shall be measured and paid separately, complete as specified and directed.
106	Supply and fixed in repairs looking mirror 5.5mm thick,with First class hard wood (Teak wood) beading mounted on 6 mm thick commercialwater proof ply woodon backincluding necessary sprit polishing on teak wood beading and fixing clips etc complete as specified and directed.
107	S &F Brass chromium platedtowel ring 150 mmdia fixed in repair complete all as directed.
108	M&L, plain cement concrete1:5:10, type E 2, using40mm graded stoneaggregates, finished the surfaces even and fairas in filling in sunken portion of toilet floor, allcomplete as specified and directed.
109	Demolition of floor, hearth or wall tiling including cement mortar bedding (but no backing), removing serviceable tiles to store and rubbish off the premises,complete as specified and directed.
110	Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified.
111	Glazed coloured ceramic tiles (joint free) in vertical surface, size450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement tomatch coloured tiles over and including 10 mm thick rendering CM (1:4). complete as specified and directed.
112	Glazed Vitrifiedtiles full body light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cm (1:4) complete as specified and directed.
113	Vitrified Ceramic tiles full body light shade10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in verticle surfaces of dado/ skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cm (1:4) complete as specified and directed.
114	Non - skid coloured Ceramic tiles (joint free 7 to 8 mm thick (square/ rectangular) area of eachtile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15mm thick screed bed in CM (1:4) complete as specified and directed.
115	M&L colouredcement conc tiles 25cmX25cm X22 mm thick rubber pressed set jointed and pointed in neat cement slurry fixed with grey cement and withpigment incl 15mm th fixed in CM 1:6 cement screed bed comlete all as specified and directed
116	M&L for 25mm thick plain cementconcrete type B-0 1:2:4 (12.5mm graded aggregate) as in sub floors below tile etc complete as specified and directed.
117	Dismantling stone slab of any description or thickness in floors, aprons laid bedded and jointed in any mortarcomplete all as specified and directed
118	M&L for18-20mm thick granite (of any type) machine cut, polished including grinding and polishing complete as in shelves etc complete as specified and directed.
119	M&L for18-20mm thick granite (of any type) machine cut, laid over and incl 20mm thick cement mortar (1:6) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing , complete as specified and directed.
120	M&L for Machine cut kota stone slab size not less than 550x550 mm flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
121	M & L for screed bed of kota stone15mm thick in CM 1:6 or laying floor finishes complete all as specified and directed.
122	M&L for Machine cut kota stone slab flooring 20-25mm thick over Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed andjointed withincluding rubbing and polishing complete all as specified and directed
123	M & L for rendering/backing coat of kota stone in riser 15mm thick in CM 1:4, on fair faces of brick work or concrete surface complete all as specified and directed.
124	M&L forwhite marble work 18-20mm thick in steps, skirting, jambs,pillars, window cills, and like, laid over and incl 15mm thick rendering in cm (1:4) including pointing in colouredcement in cm (1:2) using marble dust with admixture of pigment to match with marble shade
125	M & L 16 to 18mm thick “ Udaipur green” stone, as in flooring,steps, cooking platforms and like set in and including 15 mm thick screed bed in cement mortar (1:4) including pointing in colour cement 1:2 using marble dust with admixture of pigment to match with shade of stone including rounding of exposed edges of udaipur green stone and demolition of existing stoneslabs including cement mortar bedding andrubbish off the premises complete all as directed.
126	Rounding to edges of stone slabs one edge, such as in steps, cooking platform,edge of WHB support and other similar situations all as specified & directed.
127	Complete full rounding of staircase edges with double thick patti full round moulded edges of required size. The granite/Marble treads shall be fixed with cement groove on treads and the double thick patti moulded edge shall be joined with araldite adhesive to the tread nosing. The cost shall be inclusive of cutting, moulding, transporation, edge polishing, bottom patticomplete all as specified and directed.
128	Dismantling of cast iron or reinforced concrete drain pipes 100mm bore, jointed in cement mortarandtakingout of trenches, if required
129	Dismantling of cast iron or reinforced concrete drain pipes75mm bore, jointed in cement mortarandtakingout of trenches, if required
130	S&F for 100mmbore Hubless Centrifugally cast (spun) (conformingIS 15905 -2011) soil, waste and vent pipes epoxy coated inside and out side in any length with or without ears, with EPDM rubber gasket as per manufacturers instructions, laid in trenches or in floors complete all as specified and directed.
131	S&F for 100 mm boreHubless Centrifugally cast (spun) (conformingIS 15905 -2011) iron soil, waste and vent pipes conformingIS 15905 -2011 epoxy coated inside and out side in any length with or without ears, with EPDM rubber gasket as per manufacturers instructions, fixed to walls, all complete.
132	S&F for 75mm Hubless Centrifugally cast (spun) bore sandSpun (conformingIS 15905 -2011)iron soil, waste and vent pipes epoxy coated inside and out side in any length with or without ears, with EPDM rubber gasket as per manufacturers instructions, laid in trenches or in floors all as specified and directed.
133	S&F for 75mm bore Hubless Centrifugally cast (spun) (conformingIS 15905 -2011) iron soil, waste and vent pipes epoxy coated inside and out side in any length with or without ears, with EPDM rubber gasket as per manufacturers instructions, fixed to walls, all as specified and directed.
134	S&F forHubless Centrifugally cast (spun)(conformingIS 15905 -2011) bends (any radius) 100mm pipe, diminishing pieces or tapers (larger bore measured) with oval access doors, with EPDM rubber gasket as per manufacturers instructions, fixed in repairs, all complete as directed.
135	S&F forHubless Centrifugally cast (spun)(conformingIS 15905 -2011) bends with oval access door, (any radius) 75mm pipe, diminshing pieces of tapers (large bore measured) with EPDM rubber gasket as per manufacturers instructions, fixed in repairs, all complete as directed.
136	S&F forHubless Centrifugally cast (spun)(conformingIS 15905 -2011) Bends (any radius) 75mm pipe, diminshing pieces of tapers (large bore measured) with EPDM rubber gasket as per manufacturers instructions, fixed in repairs, all complete as directed.
137	S&F forHubless Centrifugally cast (spun) (conformingIS 15905 -2011) 100mm Branch pieces, single (equal or unequal), ordinary or inverted (spigot or sockettype) or with parallel branches with EPDM rubber gasket as per manufacturers instructions, fixed in repairs, all complete as directed.
138	S&F for75mm boreHubless Centrifugally cast (spun) (conformingIS 15905 -2011) Branch pieces, single (equal or unequal), ordinary or inverted (spigot or sockettype) or with parallel brancheswith EPDM rubber gasket as per manufacturers instructions, fixed in repairs, all complete as directed.
139	S&F for Cast iron75mmHubless Centrifugally cast (spun (conformingIS 15905 -2011) ) diameter of floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1(using 20mm graded crushed stone aggregate),fixed in repairs, all complete as directed.
140	S&F in repair for 75 mm bore out let cast floor trap spun pipe (conforming to IS 3989) incl cockroach trap with gratings including including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and as directed
141	S&Fin repair50 mm bore Cast ironspun pipe (conforming to IS 3989) soil, waste and vent pipes, in any length with or without ears with leadt joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and as directed
142	S&Ffor 75 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears with lead joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and as directed
143	S&F for 100 mm bore Cast ironsoil, waste and vent pipes, in any length with or without ears with lead joints, laid in trenches or in floors or vertically cast, complete all as specified and as directed
144	S&F75mm bore cast iron Bends of (any radius), spun pipe (conforming to IS 3989) diminishing piecs or tapers (larger bore measured) complete all as specified and as directed
145	S&F100 mm bore cast iron Bends of (any radius),spun pipe (conforming to IS 3989) diminishing piecs or tapers (larger bore measured) complete all as specified and as directed
146	S&F75mm bore cast iron Tee of (any radius),spun pipe (conforming to IS 3989) diminishing piecs or tapers (larger bore measured) complete all as specified and as directed
147	S&F100 mm bore cast iron Tee of (any radius),spun pipe (conforming to IS 3989) diminishing piecs or tapers (larger bore measured) complete all as specified and as directed
148	S&F50 mm cast iron cowlsspun pipe (conforming to IS 3989) complete all as specified and as directed
149	S&F for cast iron100mm Branch pieces, single (equal or unequal), ordinary or inverted (spigot or sockettype) or with parallel branches with cement joints, fixed in repairs, all complete as directed.
150	S&F forcast iron75 mm Branch pieces, single (equal or unequal), ordinary or inverted (spigot or sockettype) or with parallel branches with cement joints, fixed in repairs, all complete as directed.
151	Sunkentreatment through manufacturer /authorized applicator of the manufacturer as approved by GE by applying a coat of cold applied bituminous primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm followed by APP modified five layer polymeric membrane 3mm thick, minimum weight 3.60 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/Sqm) manufactured by IWL/STP/Texas India/ Hydrotech Ltd. , laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfacesetc complete including taking down existing treatment of the RCC sunken slab, cleaning off all foreign matter by wire brushing, cleaning off surface with water and removal of spoil complete all as directed.
152	Roof treatment through manufacturer /authorized applicator of the manufacturer as approved by GE by applying a coat of cold applied bituminous primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm followed by APP modified five layer polymeric membrane 3mm thick, minimum weight 3.60 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/Sqm) manufactured by IWL/STP/Texas India/ Hydrotech Ltd. , laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfacesfinally finished with bituminous aluminum paint @ 0.10 Kg/Sqm etc complete including taking down existing roof treatment of the RCC slab, cleaning off all foreign matter by wire brushing, cleaning off surface with water and removal of spoil complete all as directed.
153	Taking up or down steel of tubing 15mm bore and connections, includingremovalfrom site , all as directed.
154	Taking up or down steel of tubing 20mm bore and connections, includingremoval from site , all as directed.
155	Taking up or down steel of tubing 25mm bore and connections, includingremoval from site , all as directed.
156	Taking up or down steel of tubing 40mm bore and connections, includingremoval from site , all as directed.
157	Supplying and laying of CPVC pipes 15mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
158	Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
159	Supplying and laying of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
160	Supplying and laying of CPVC pipes 40mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
161	S&F medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed
162	S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed
163	S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 25 mm dia bore pipe (including in short length) complete all as specified and as directed
164	Disconnecting existing tanks capacity exc 500 ltr and nexc 1000ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and doisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)
165	S&F 1000 ltr capacity Rotational moulded polythylene water storage tanks three layered,white, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling/ taking out of old water tank & removing to where directed complete all as specified and as directed.
166	S&F 2000 ltr capacity Rotational moulded polythylene water storage tanks three layered, white, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling/ taking out of old water tank & removing to where directed complete all as specified and as directed.
167	S&F 2000 ltr capacity Rotational moulded polythylene water storage tanks three layered, white, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part Icomplete all as specified and as directed.
168	S&F in repair Ball valves 25mm bore high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 90mm- 690 gm)
169	S&F in repair Gun-metal, globe or gate valves,for 25mm bore pipe with iron wheel head, screwed both endsfor iron pipe and fixed
170	Dismantling of wall/ceiling boards of any descriptionincluding cover fillets etc all complete as specified and directed.
171	M & L 595 mm X 595mm false ceiling system , using hot dipped galvanised steel section exposed surface with precoated capping, GI powerd coated tee and cross tee of size 24x32mm & 24x27mm having 0.27mm gauge at every 600mm c/c interval and wall angle of size 19x19mm having 0.35mm gauge fixed to the wall. The above grid is tobe suspended at every 1200mm c/c in both direction using 2mm thick pre-straightened GI wire laying designer tile ivory painted (high pressure steam cured) of 4 mm thickness (as per IS 14862) of size 595x595 mm and ant ine of the design (cascadev or electra) , back of the tile duly sanded and finished with a coat of protective paint over the formed grid etc complete all as specified and directed
172	S&F 18/19mm thick one side prelaminated colour WPC Sheet for cup board shutter and frame & fixed at site complete all as specified and directed.
173	Stainless steel handles fancy type 100 mm size for kitchen cabinet shutters fixedcomplete all as specified and directed.
174	S&F, Steel cup board with Hitachi fittings ofarea not exc4.50 sq m with frame and shutter with three drawers including cabinet for drawer and open shoe rack, locking arrangement, mirror etc. withfollowing specifications :- 1. Frames and shutters shall be made out of 1.00mm thick MS sheet.2. Locking arrangements with two stainless steellock and handle shall be provided on shutters. 3. All drawer shall be provided with loc, andchannel system heavy duty.4. One SS handle of size 75mmon each drawer shall be provided. 5. Bottom portion shall be open for shoe racks in three parts. 6. Mirrorof size 0.45mtr X1.20mtr with MS sheet frame shall be provided . 7. One 15mm dia stainless steel heavy duty conduit pipe with end brackets for hanger shall be provided. 8. Frame shall be fixed with dash fasteners.9. Two coatsof Hamerton paintof approprate colour over one coat of red oxide primer, including taking down exiting unserviceable wooden cup boards andmake good the edges/ sides, all complete as specified and directed .
175	S & F factory made WPC single extruded 100% lead free ROHS certified board of 18mm thick pre laminated moulded shutter for kitchen cupboard. The laminated shutter should be 10 mm deep mould on the pre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.
176	Providing and fixing factory made uPVC white colour casement (Openable) window made of extrudedprofiles with wall thickness of 2.3mm ( + – 0.2mm) Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters ) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, includingdrilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). Tprofile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mmlong fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of\"zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) Area exceeding 2.00 Sqm each complete all as per specified and directed.
177	S&F factory made UPVC white colour Slinding Window threetrack made of extruded profiles with wall thickness of 2.3mm (±0.2mm),Window profile with hollow section with multi chamber, frame (88mm X 52mm), sliding sash (42mm X 67mm), Sliding mesh sash (42x57mm), sliding interlock(one vertical length in each shutter) (45.5mm X 28mm), glazing bead (24.5mm X 16mm) willbe mitered, cut and fusion welded at all corners, including railing of holesfor fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket 1.2 ± 0.2mm thick galvanised steelframe (30mm x 18mm) 2 Nos, sliding sash (30mm X 18mm) 2 Nos, sliding mesh sash (26mm X 10mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners.Haradware (tough lock of zinc alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of apaerture 1.40mm and required accessories.Note :The unit rate includes cost of glass and all other connected accessories).
178	M & Labour for 25mm dia Stainless Steel Heavy dutyCurtain Rod of Grade SS-304 fancy type with curtain rod holder and bracket complete all as specified and directed
179	M & Labour for Brackets, Ends Cap and Holder suitable for 25mm dia Stainless Steel Curtain Rod fancy type complete all as specified and Approved
180	S&F,in repairs, Stainless steelcurtain rod 25 mm dia and 2mm thick with and including brackets 02 Nos and finial 02 Nos.complete all as specified and directed.
181	S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
182	M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate for fixing of hold fast and making good all as specified and directed.
183	Supply & fixing factory made WPCdoor frame 100% Solid(wood polymer composite) Size100mm x 50 mm Single Rebated ,made from wpc material comparising of virign PVC polymer of K value 58-60 (suspension grade ) calcium corbonate and natural fibers ( wood powder/rice husk /wheat husk)minimum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance to spread of flame of class \"A\" category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasterns / hold fast of required dia and length,colour of door frame to match that of shutter all as per specifications drawings complete all as specified and directed.
184	M&L Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk).
185	Taking down chowkhats or frames with shutter (without taking off shutters from the frame) area of eachexc 4.0 sq. m, each and refixing in same opening after easing .
186	Taking down chowkhats or frames with shutter (without taking off shutters from the frame) area of ecahnot exc 1.5 sq. m,
187	Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of sizeexc 1.5 Sqm and n.exc 4 Sqm complete all as specified and directed
188	S&F for 105x60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified, supplied and fixed.
189	S&F for 125x60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified, supplied and fixed.
190	S & FIInd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.
191	M/L 40 mm thick IInd class hard wood(teak wood) plain framed panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, all as specified and directed.
192	S &F 35 mm IInd class hardwoodGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or S & F for rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
193	S&F 30mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated divided into squaresandprepaned to receive glass, gauge etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads.
194	M & L 5.5mm thick sheet glass ordinary quality and fixed to wooden doors with wooden beads or tinned tacks in square not exc 0.5 Sqm each pane complete all as specified and directed.
195	S&F 50 mm magnetic lock for cupboard complete all as specified and directed .
196	S & F 100mm SS Butt hingesand fixedall as specified and directed.
197	S&F 150 mm SSbarrel tower boltsand fixed complete all as specified.
198	S & F 150 mm SShandles complete all as specified.
199	S&F 200 mm Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified.
200	S&F 150mm aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
201	S&F aluminium alloysliding door bolts, 300 mm plate type, stove enamelled black, with bright bolt not less than 12mm dia with and incl a min of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed
202	S&F150mm Aluminium handles, cast type anodised complete all as specified and directed
203	S & F 125 mmExtruded aluminium alloy handles, fabricated type, anodisedcomplete all as specified.
204	S&F in repair stop valves/angle valves fancy typechromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unionsfixed for 15 mm dia bore pipe complete all as specified and as directed
205	S&F 75mm stainless steel butt hinges complete all as specified and directed.
206	S&F 100mm stainless steel butt hinges complete all as specified and directed.
207	S&F door closer hydraulically regulated designation No.3,universal type,suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg and fixed
208	S & F 3mm thick frosted Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
209	S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
210	S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen with plug/waste pipe washers including cantiliver bracket or, connecting unions etc over all size 915 x 460mm with bowel size 410mm x 330mm x 160mm complete all as specified and as directed
211	M&LOne coats of anti corrosive spray paintwith teak wood grains finish by mechanical method to old steel surface incl preparation of old paintedsurface complete all as specified and directed.
212	S&F for steel ventilator with top hungcshutter including hinges, steel peg stay, complete all as specified and directed.
213	Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth
214	Taking down and raking out cement plaster in brick or concrete surfaces
215	M & L plastering in two layers consisting of 10mm thick in CM 1:4 and top layer of 5mm thick in CM 1:4 mixed with liquid water proofing compound on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed. (WPC shall be measured and paid seperately)
216	Supply only integral water proofing compound.
217	M&L Rendering 15mm thick1:6 CM on fair faces of brick work or concrete surfaces finished even and smooth without usingextra cement , all as specified and directed.
218	M&L for 15 mmthick rendering in CM (1:6) on other than fare faces of brick wall or concrete surfaces finished even and smooth without usingextra cement , all as specified and directed.
219	M&L for 10 mmthick rendering in CM (1:4) ready mix on fare faces of brick wall or concrete surfaces finished even and smooth (using WPC)all as specified and directed.
220	Rendering 5 mm thick in CM (1:3) using coarse sand on wall or ceiling of concrete surface finish even and smooth without using extra cement complete all as specified and directed.
221	M&L for preparation of old painted surfaces of steel surfaceof any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
222	M&L for preparing of old painted surfaces of wood & wood based surfaceof any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
223	M&L for preparation of new wooden surfaces , any width or girth includingcleaning, rubbing with sand paper of different sizes, filler coat,including one or more coats of french polishing up to desired finishing as per satisfication of Engr-in-Charge.
224	M&L for three coats of white wash on ceiling on new plastered surfaces including preparation of surfaces complete all as specified and as directed.
225	Preparation of old plastered surfaces of ceilingincluding brooming down or steel wire brushing scrap down smoke soots, mouds, moss, and efflorescent salts and trading oil and greasy spotsand applying one coat of white wash on ceiling all as specified.
226	M&L for preparation of old plastered surfaces of ceiling including brooming down or steel wire brushing scrap down smoke soots, mouds, moss, and efflorescent salts and trading oil and greasy spotsand applying one coat of OBD on ceiling , all as specified and directed.
227	Preparation of old plastered/unplastered surfaces of wall and applying twocoat of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger) on walls over two coat of external wall care putty complete all as directed.Note : Work will be carried out upto triple storied buildings.
228	M&L two coats ofApex(weather proof)paint over external wall care putty on newly plastered surface incl prepration all as specified and directed.
229	Preparation of new plastered/ puttied surfaces of walland applyingtwo coats of oil bound distemperover one priming coatfor distempering, complete as specified and directed.
230	M&L for preparation ofplastered or unplasteredold treated wall surfaces including brooming down or steel wire brushing, scrap down smoke soots, mouds, moss, and efflorescent salts and trading oil and greasy spotsand applying one coat of OBD on walls all as specified.
231	Preparation of new plastered/ puttied surfaces of wall by brooming down including cornices, pillar etcapplying three coat of white wash on walls complete all as specified.
232	Preparation of old plastered/un-plastered surfaces of wall by brooming down including cornices, pillar etc and applying one coat of white wash on walls omplete all as specified.
233	FIRE FIGHTING
234	Supplying laying, testing & commissioning of \"C\" class heavy duty MS Pipe conforming to IS 1239/3589 iincluding fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation &providing cementconcrete blocksassupports, anticorrosivetreatmentwithcoaltar/asphalttapeasperIS10221, refilling the trench etc. of 100 mm dia complete as required.
235	Supply, laying, testing & commissioning of \"C\" class heavy duty MSERWpipe conforming to IS3589/IS 1239including Welding,fittingslike elbows,tees,flanges,tapers,nutsbolts,gasketsetc.andfixingthe pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete all as specified and complete all as directed for the following :-
236	MS ERW pipe of size 80 mm as per relevant IS
237	MS ERW pipe of size 40 mm as per relevant IS
238	MS ERW pipe of size 25 mm as per relevant IS
239	Supplying, fixing, testing & commissioning of double flanged non returnsluice valve of rating PN 1.6 with non rising spindle, bronze/guE12:E18n metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of 100 mm dia as required
240	Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of 100 mm dia as required
241	Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of 80 mm dia as required
242	Supplying, fixing, testing & commissioning of double flanged butterfly valveISI marked complete with nuts, bolts, washers, gaskets E12:E18 of 40/50 mm dia as required
243	Supplying, fixing, testing & commissioning of Gun metalBallvalve of size 20/25 mm dia
244	S&F 2 way fire bridge inlet connection (FBIC) comprising to gun metal body and gun metal instantanous male inlet coupling conforming to IS 904 with plug and cap with chain as required with nut bolts with high pressure rubber gasket suitable for 100 mm dia MS pipe connection as required complete all as directed by Engineer-in-Charge
245	Supply installation testing and commissioning 100% synthetic flex canvas non percolating type confirming to IS 636 RRL hose (type A) ISI marked 63 mm dia x 15 m long with stainless steel male and female coupling (ISI marked) bound and riveted to hose pipes with copper rivets and copper wire as required.
246	Supplying and fixingHose Reel of 20 mm dia and 30 meter length made of thermoplastic(Teftilereinforced)type-2asperIS:12585andDrum&brackets for fixing the equipments on wall complete with connections from riseras required and specified.
247	Supplyingandfixingweatherproofstandardhoseboxwithdouble door of size 800 mm x 600 mm x 250 mm Depthmade of 1.6 mm thick MS sheethaving double opening glazed doorwith 4 mm thick glass suitable for accommodating 2 number 15 Mtrs long 63 mm dia hose pipe, 1 no short branch pipe mounted on wall & duly painted with Post office RED externally and white internally with synthetic enamel paint complete in all respect for internal hydrant as required.
248	Supplying &fixing 63mm diagun metalshortbranch pipe with 20 mmnominalinternaldiametersizenozzleconformingtoIS903 suitable for instantaneous connection to interconnect hose pipe coupling as required
249	Supplyingandfixingdouble headedlanding hydrantvalvewith instantaneousGunmetalcouplingof63mmdiawith castironwheelISImarkedconformingtoIS5290(Type - A)with blank cap and chain as required.
250	S&F Dry Powder type(ABC) Fire extinguisher(IS: 15683) 4.5 Kg capacity ( 8 Kote + 4 Drill mess + 4 Raman Hall + 14 Drill lines+ 12 GCs Accn)
251	S&F fire fighting stand post with MSboard of size 1000 mm x 500 mm x 6 mmincluding making hooks/ bracket on board , and painting in red colour andwritingletter on board as instructedby Engr-in-Charge and PCC/bricks works required to hold two bucket on ground all as specified and directed.( 4 Kote + 2 Drill mess + 2 Raman Hall + 7 Drill lines+ 2 GCs)
252	S&F water type extinguisher(IS: 15683) 9 Kg capacity
253	S& F light weight squeenze grip type CO2 Extinguisher(IS: 15683) 9 kg capacity
254	S&F Dry Mechanical foam extinguisher(IS: 15683) 9 ltr capacity
255	S&F Fire buckets(Dry sand) (IS:2546)
256	S&F Fire Beaters with 20 feet long handle with duly painted with red enamel paint all as specified
257	S&F Fire Axe with suitable length handle duly painted with red enamel paint all as specified and directed
258	S&F Fire Hooks with 20 Feet long handle duly painted with red enamel paint
259	Providing and fixing of 5000 litrs capacity water tank (for priming purpose) madeupofvirgin/FDAGrade plasticmaterialincludingsuitable fixing accessories forsurface /roof mounting etc as required.
260	Supplying ,fixing,testing&commissioningofinstallationcontrol valveofcastironbody,brass/bronzeworkingpartscomprisingof water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates,pressure gauges,emergency releases, strainer,pressureswitch,cockvalvecompletewithdrainvalveand bypass, test control valve, ball valves, MS pipe, flanges, orifice plate, gasket etc of required size.:
261	Supply,installation,testing&commissioning of horizontaltype booster pump setBooster pumpsConfirming to IS- 12469 :1988 With CI Casing bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for 440 volts, 3 phase, 50 Hz ,30 Mtr head& 900 LPM dischargewith suitable size dia delivery line in the open well includingweather proof joint, connecting the delivery pipesetc as required for terrece pump complete all as specified and directed by fire authority.
262	Supply andfixinginpositiontheindustrialtypepressuregauges 4\"dial 0-14 kgs rating with gun metal / brass valves complete as required
263	Supply andfixinginpositionpressure switchinM.S.pipelineincluding connection etc. as required.
264	Supply and fix Automatic air release valve 40/50 mm dia suitable for fire fighting system made ofgun metal complete all as spd and directed
265	Supply and fixStrainer for Suction for 100 mm diacomplete all as specified .
266	M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint (For terrace tank stage)
267	Supplying, installation, testing & commissioning of analog addressable fire alarm control panel micro processor based network and expandable with dual stage alarm facilities like hooter, fire/fault indicators, audio visual signals, auto learn features, PC networking connectivity, communication facility with battery backup for 8 hrs normal operation and 15 minutes alarm operation. The control panel shall be provided with hot redundant CPU(degraded mode is not acceptable). The control panel, battery charger etc. shall be UL listed. The panel should be 1 loop capacity & it shall be capable to extend upto 2 loops.The panel shall consist 640 characters LCD display and for networking with software and programming including maintenance free batteries complete all as specified and directed.
268	Supplying, installation, testing & commissioning of Detectors Complying with and type certified to EN - 45Addressable type multisensor detector with heat and smoke combination with base with self built intelligence as per IS: 11360
269	Supplying, installation, testing & commissioning of response indicator on surface or recessed MS Box having two LED, metallic cover complete with all connections etc as required.
270	Supplying, installation, testing & commissioning of addressable manual call point complete as required.
271	Supplying, installation, testing &commissioning of loop poweredsounderstrobe complete as required.
272	Supplying,installation,testing&commissioningofaddressablefire control module complete as required
273	Supplying,installation,testing&commissioningofShort circuit/faultisolator complete with base as required.
274	Supplying installation testing and commissioning of addressable electronic Hooter with audioable range of 25 to 30 mtr with suitable output wattage.These Hooter should be such that they are capable of public announcement as well as used for fault as requried.
275	Supplying installation testing and commissioning of Fire Alarm Sounders / Sirens Electronic type horizontal two stage continous normal operation for at least 50 minutes with sound level 65 DB to 120 DB measured at 1.5 Mtr with sound output variation of + 5 DB3500 m range
276	Supply and fix 10 Watt wall mount CD Speaker/Hooter
277	Supply and fix 250 Watt Amplifier
278	Supplyingandfixingof20 mm diaPVCconduitalongwith accessoriesinsurface/recessincludingpaintingincaseofsurface conduit,orcuttingthewallandmakinggoodthesameincaseof recessed conduit as required.(For Fire Alarm System)
279	Supply, laying & testing PVC insulated,unsheathed multistranded FRLSH copper conductor of size 1.5 sq mm single core, 1100 Volts gradecableelectric control cables (Heavy duty) all as specified and directed.
280	Supplyingandfixingof booster pump controller in sheet enclosure Type MU-G6 DOL for three phase motor 415 volts, 50 HZ, 5 HP, 6-10 Amps relay range including suitable size LT panel, outdoor type, for mounting/fixing the pump controller, cubical compartmentalised of 2mm thick CRCA sheet powder coated front door openable with angle iron 45x45x5 mm frame bottom of the panel board, grouted by using PCC foundation 1:2:4 type C1 with 20 mm graded stone aggregate, thimbling and cable entry boxes with cable gland inculding painting with two coat of powder coated paintingover a coat of red oxide primercomplete all specified and directed.
281	Note for Fire Fighting Schdule Portion Items-(i) Contractor shall be obtain approval for firefighting and fire alarm system approve plans from local fire authority. The plans shall be clearly marked and indicate the complete fire protection arrangements and the means of access/escape for the existing building with suitable legend along with standard signs and symbols on the drawings. Layout/arrangement of fire fighting wrks shall be approved by the GE before commencement of wk.(ii)The work shall be got executed through fire alarm specialist firm who shall design supply, install , testing and commissioning fire alarm system consisting of fire alarm sounders, break glass units, smoke detector, beam detector and control units etc as specified /required at site.(iii) After completion of fire fighting installations duly tested and certified by the licensed Fire Consultant. The information regarding fire safety measures shall be furnished as per relevant annexure along with details. The completion certificate with respect to his work as required for occupation of the building without any extra cost.
282	SPECIAL ITEM OF WORK
283	S&F Pre- painted galvalumealuminum zinc coating GIbased corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified complete all as specified and directed. Note:- The work shall be carried out in roof of triple storey bulding.
284	S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
285	M&L Rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running railsand guides for sliding doors;fixed with angle cleats or other connecting plates incl fixing with expension fastner to wall as directed by Engr in charge complete all as specified and directed. Note:- The work shall be carried out in roof of triple storey bulding(Fe-290 Gde E-165)
286	M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paintetc complete all as specified and as directed.
287	Supply Installation,Testing and commissioning of 100% Inverter VRF Modular unitscomplete with Inverter Scrollcompressor fitted with Conentrated winding, air cooled condenser with low noise fan havinginterconnected control wiring and refrigerant piping housed in compact housing duly powder coated, Conformal Coating on PCB, Hydrophilic Blue Fins, All Outdoor Units from & Above 18HP should have two Compressors & twin accmulators for better performance of Machine. All units are Cooling & Heating both with Eco Friendly Refrigerant(R-410a). Unit should deliver 100% capacity without deration upto 42°C Ambient Temperature.Operating Outdoor Ambient Temperature Range Cooling 10°C to 56°C & for Heating -10°C to 24°C.IPLV should be more than 6.7. VRF Installation work to be execute by OEM or OEM Authorised Vendor Only. All Drawings & Heat Load should be Vetted through OEM /NIT/IIT.Inside Room Condition should met criteria of 24 +/- 2 Degree Centigrate and 50 +/- 5 % Realitive Humidity . Note: -Extra Refrigerant Gas other than Pre charged Gas will be paid extra as per schedule item 9.-All Outdoor Unit placed on MS Stand as per Schedule Item 8 with proper PCC.-Outdoor Unit Capacity should not be less than 40HP (28HP+12HP) with Outdoor Y Joint Capacity.- For any Additional Capacity required, no Payment will be made Extra.- Tentative Design Sheet enclosed As per Appendix \"A\"
288	Supply installation,testing and commissioning ofHiwall Units with evaporator coil,fan and Fan motor,with corded remote control and necessaryaccessories etc suitable for operation on 230 V +- 10% 50 Hz single phase AC supply complete as required.The units shall be of1.5Tr (500CFM) (For Rest & Projector Room) capacities.
289	Supply, Installation, testing and commissioning of (Air Handling Unit) Floor Mounted type, ‘EUROVENT CERTIFIED’ / \"AHRI Certified\" 45 mm thick double skin Casing consist of Outer Skin of 0.6mm Pre Coated GI, Inner Skin of 0.6mm Plain SS-304, Frame work consist of Thermal Break Aluminium profile with thermal barrier, insulated panels of Thickness 45mm CFC Free PUF injected (Density: 40 kg / Cu. m.), Drain tray material consist of 20 G SS-304 Tray duly insulated with 13 mm closed cell Nitrile insulation, GSS Base Channel, with Mixing Chamber. Coil Casing / Blank offs SS-304, Include AHU Control Panel with VFD, with AHU Kit & Controllers(Include Remotes)Coil section with 6 row deep DX cooling coil, For Supply: With Copper tube(IGT):-Tube Dia 9.52 mm / 3/8” O.D, Thickness of Tube 0.5mm,Fins Thickness of 0.15mm of Plain Aluminium Fins, Copper with hydrophilic coating 11 to 13 Nos.Per Inch. Filter Section - Pre (Eu-4) Filter & Fine Fiter Section - EU-7 Rigid media, Motor - EC Fan motor. UVGI Lamp, CO2 Sensor.Total Refrigerant gas flow pressure drop including distributor - Max. 4 psig(Coil to be selected at below parameter:-a. 7.2°CEvaporative Tempb. 54°CCondensing Tempc. 4° C Superheatd. 5°C Subcoolinge. Fluid Pressure Drop not more than 35 Pascal)
290	DISTRIBUTORS SHOULD BE IN VERTICAL POSITIONSupply Air , Return and Fresh Air Damper require in AL construction with motorised Acuator.SS piping system for Pan type humdifier from humidifer to AHU section will install after the heater section ( Rate of Humdifier to be quoted separately) in respective item. Heater Section: GI strip heater in 3 bank construction is require as per below capacity with connected heater operating panel in Stap with sensor , contactors and relays.All AHU should be place on PCC Platform of 450mm height.Note:- Capacity of AHU should not be less than 31Tr (8500 CFM) 50mm Static Pressure, with Heater 8Kw (With AHU Kit+Remote+AHU Control Panel)Capacity. Static Pressure should not be less than 50mm. Heater Capacity should not be less than 8KW. No Extra Payment will be done for any extra Capacity provided by the Contractor due to design requirment as vetted by OEM/NIT/IIT.
291	S&F refrigerantY-JointforCombiningOutdoorandIndoorUnitsrequiredfordistributionof refrigerantincopperpipingasperfinalapproveddrawing whichwillbesubmitted byOEM.
292	Supply,installation,testingandcommissioninghighpressureinterconnectingrefrigerantpipeof followingsizesincludingcivilworklike wallopening forcopper anddrain pipefor VRFsystem with (19mm/13mm thick) closed cell elastomeric nitrile rubber tubular insulation between indoor & outdoor units as per specifications.All Piping intall on cable trays(As per Sch Item 11) with cover for outdoor locations as per OEM recommendations and PVC sleeves shall be provided wherever pipe is crossing the wall. All Exposed piping should be UV Pianted. Food grade nitrogen shall beusedwhilemakingbrazing jointscomplete allas specifiedand directed:-
293	6.4 mm with 13 mmthick insulation
294	12.7 mm with 13 mmthick insulation
295	15.9 mm with 13 mmthick insulation
296	19.1 mm with 13 mmthick insulation
297	22.2 mm with 19 mmthick insulation
298	28.6 mm with 19mm thick insulation
299	34.9 mm with 19mm thick insulation
300	38.1mm with 19mm thick insulation
301	Supply and fixing in position the 32mm dia of PVC (UPVC quality) pipes, cut in required lengths and joined with PVC cement and also providing and fixing in position the necessary \"U\" trap elbows, tees, and reducer and all types of fittings. Cost to include all necessary as required. Necessary Wall cutting and making the wall good and its cost should be included. The pipe to be insulated by 9mm thick nitrile rubber thermal insulation of class 0 category.
302	Supply, fixing, testing and commissioning of 2 Core x 0.75mm² control wiring ( Sheilded Wire) from outdoor to indoor units to the central controllerwith all necessary accessories to make it functional as per OEM Recommendation.
303	Supply and fixing of MS Stand as per OEM Recommendation and Placing of Outdour Unit on MS Stand of C Channel.
304	Supply, Charging of Refrigerant Gas R410a as per OEM Recommendation
305	Supply and fixing of 125mm deep AntivibrationFlexible Jointsmade out of imported fire retardant fabric with extruded aluminium frame/ flange on both sides for Outdoor Units.
306	Supplying and installation for following size of perforated Hot Dipped Galvanised Iron Covered cable tray for exposed refrigerant pipe With Bends, Tee, Cross Member & Reducer (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
307	150 mm wide x 50 mm depth x 1.6 mm thickness.
308	300 mm wide x 50 mm depth x 1.6 mm thickness.
309	450 mm wide x 50 mm depth x 2.0 mm thickness.
310	Supply and installation, testing, commissioning Outdoor type feeder piller Box made out of 3.15 mm thick CRCA sheet , 415 Volt, 3 phase , 50 HZ supply factory made & MS angle section 40 x40x 5mm frame with front and back openable double door with provision of locking arrangement dust & varmin proof , gasket, TPN busbar shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof duly spray painted inside and outside of panel with one coat of red oxide primer and two coat of synthetic enamel paint grey completeall as specifed abd directed& Connisting of the followingequipments:-(i) MCCB, 4 pole , 25 KA , 300Amps adjustable to thermal MagneticRelease-01 No ( Incomming)(ii)MCCB, 4 Pole, 16 KA, 32Amps -2, 40 Amps -1 No, 63 Amps - 4Nos.(Out going)(iii) Indication Lamp 22.5 mm dia LED type 240Volts AC to show three phase availability- 01 set MAKE : L & T/Secure/Conserv(iv) Solid aluminium bus bar 400 Amp for 3 phase , 200 Amp for neutral, Includes Auto Phase Sequencer to stable Phase.(v) PCC and block Mesonry work for grouting of panel complete all as specified and directed
311	M&L Earthingwith galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised earth strip 32x6 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion includingprovision of 40 mm GI Tubing, light grade and watering pipe shall be 20 mm bore GI light grade including excavation & earth work, PCC pit with CI cover, Charcol, salt, funnel, wire mesh, GI strip Up to 7.5 mtrs length complete all as specified and directed.( 05 for Spl item of Work + 18 External Electric Supply)
312	M & L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised steel or iron wire all as directed.
313	Supply, Laying, jointing and testing of electric cable XLPE 3.5 Core 150 sqmm insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor laid in trenches/duct/pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed.
314	M&L for control wiring with 4 core X 16 sqmm , FRLS PVC round insulated and sheathed wire featuring a bright annealed bare copper conductor cable 1100 Volts grade with multi stranded, wire colour black, drawn through concealed conduit including PVC rigid conduit medium grade 50 mm dia as per IS 694 with on Cable Tray complete all as specified and directed(Note : Four run of wire with PVC conduit will be considered as one Length.)
315	M&L for control wiring with 4 core X 4 sqmm , FRLS PVC round insulated and sheathed wire featuring a bright annealed bare copper conductor cable 1100 Volts grade with multi stranded, wire colour black, drawn through concealed conduit including PVC rigid conduit medium grade 50 mm dia as per IS 694 with on Cable Tray complete all as specified and directed(Note : Four run of wire with PVC conduit will be considered as one Length.)
316	M&L for control wiring with 3 core X 1.5sqmm , FRLS PVC round insulated and sheathed wire featuring a bright annealed bare copper conductor cable 1100 Volts grade with multi stranded, wire colour black, drawn through concealed conduit including PVC rigid conduit medium grade 50 mm dia as per IS 694 with on Cable Tray complete all as specified and directed(Note : Four run of wire with PVC conduit will be considered as one Length.)
317	S & F 12way SPN Ditribution Box with 240 Volts, 2 to 40 Amps complete all as specified and directed.
318	S & F TPN, 63 Amp & 40Amps complete all as specified and directed.
319	Supply , assembly and erection of Rectangular GI Duct (Factory Fabricated) (Zinc Coat as per IS) made out of \"L\" shaped hollow profile, duly factory boxed, including all accessories such as corner, Cleat , Carrige bolt, Gasket and appropriate sealant on langitudinal joints etc complete including necessary MS Channels, Gurder supports as approved by Engr-in-charge including making of hole in any type of wall and making good with plastering work , masonry work and necessary MS channel supports complete all as specified and as directed
320	22 Gauge GI Sheet as IS Code (Aspect Ratio should be maintained 1:3 Ratio)
321	Supply & erection of 15 mm thick nitrile duct insulation with Aluminum foil. The thermal insulation shall be 15 mm thick non-fibrous, fire retardant, closed cell, tri- dimensional chemically crosslinked polythylene foam, confirming to class O\" for fire propagation and class 1 for surface spread of flame & factory laminated aluminum foil complete all as specified and directed.
322	Supply and fixing insulation acoustic lining of supply air ducting complete with Open cell nitrile Insulation 15mm thick of density 32 kg/cum or above complete all as specified and directed.
323	Supply and fixing of fire proof double layered canvas cloth connection for indoor unit outlet including inspection opening complete with flanges made out of 22 GSS Sheet on both side for connection to indoor unit and duct with nuts , bolts complete all as specified and directed.
324	Supply, installation ,testing and balancing of Supply Air Aluminium Grills/Diffusers with volume control dampers , power coated , extruded aluminium construction complete all specified and as directed.
325	Supply, installation ,testing and balancing of Return Air Aluminium Grills/Diffusers without volume control dampers , power coated , extruded aluminium construction complete all specified and as directed.
326	Material Laying & Fabrication ofsteel work such as in cross arms angle iron breaching supports, clamps and back plate, mesh, fabricated from MS section confirming to grade Fe-410 -0 or Fe -310 -0 including nuts, bolts, washers, bending cold or hot drilling holes bolts in any shape or size as indicated or directed included of one primer coat, one under coat & one finishing coat of aluminium paint and all as spd and directed.
327	Taking down oldAC Units (include Piping, Drain, Stands, & related Items) & Existing False Ceiling deposited to user all as directed by engr-in-charge.Note:-.Contrcator is advised to visit site before quoting rate.
328	Supply , install , testing and commissioning of horizontal type pan humidifer 8 Litre/Hr installed outside AHU with canopy suitable for outdoor type application with digital comunication facility and taking command fromAHU complete with suitable size of PVCwater tank , Pumps, Spray nozzle piping and electrical accessories complete with necessary foundation and stand as per OEM recommendation , all as specified and directed by Engg-in-charge. Note:Capacity of Humidifier should provide by contractor as per OEM/NIT/IIT recommendation for additional capacity .No extra payment will be made to contractor for same .
329	M&L PUF/PIR ROOFING DOUBLE SKIN PANELS of 50 MM thick Profile: Suitable for solar panels installation without puncturing the roof. Density :- PIR (B2) 40(+-2)kg/m3, Ext. Skin:- PPGL(Pre-Painted Galvalum Steel),AZ-150 Skin Thickness:-0.50 MM interior Skin:-PPGL(PPGL(Pre-Painted Galvalume Steel),AZ-70, Skin Thickness:-0.40 MM, Ext.Colour:– RAL 9002, Int.Colour:-RAL9002, Joint type :- Tongue & Groove, Ribbed type :- Staandard Ribb, Effective Width of 1000mm & Length should as per Site Condition complete all Specified as Directed.(Rate to be quoted including Installation with all complete Accessories Required)
330	M&L of Galvalume Sheet (2mm) Shed without puncturing the roof. for AHU covering from Direct Sun Exposure & protecting from Rain water Width of 1000mm & Length should as per Site Condition complete all Specified as Directed.(Rate to be quoted including Installation with all complete Accessories Required)
331	Supply and apply tack coat of STARBOND 30-3 of following items for outdoor ducting completed all as specified and directed.(a) After erection nitrile duct thermal insulation apply tack coat of STARBOARD 30-36 and embed the selective lagging fabric (glass fiber cloth/canvas cloth) immediately.(b) Apply first coat STARBOND 30-36 by brush or roller when tack coat is cured i.e is 2-3 hours.(c) Apply final coat STARBOND 30-36 by brush or roller after first coat is fully cured.
332	Supply , install , testing and commissioning of Industrial-grade LED temperature (-20°C to 60°C) and humidity (5% to 95% RH) display board with industrial-grade microprocessor chips and imported high-precision sensors to ensure the excellent reliability, high precision, and interchangeability of the products.
333	ROAD / PATH
334	M&L for providing premix bituminous macadamnot exc 50mm thick with 4% paving bitumen as binder content by weight of total mix, laid and rolled with 8 to 12 tonne power roller and compacted and consolidated to required gradient to uniform surfaces complete all as specified and directed
335	Preparing old black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etccomplete all as specified.
336	M&L for bituminous premix dense asphaltic concrete 40mm consolidatd thickness with6% binder content by weight of total mix using paving bitumen VG-30 grade rolled and compacted to requied camber and gradient complete to a unifom surface all as specilfied and directed.
337	M&L forproviding 2.5mm thick road marking strips100 mm wide(reflective) of specified shade/colour using hot thermoplastic material by fully automatic thermoplastic paint applicator machine,fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe, heater, driven by skilled operator on road surface including cost of materials, labour, T&P, cleaning the road surface of all dirt, scales, oil, grease and foreign materials etc, complete as per the direction of Engineer-in-Charge and strictly in accordance to applicable specifications.
338	Applying evenly a priming/ tack coat with bituminous primer at 05 kg per 10 Sqm complete all as specified.
339	EXTERNAL WATER SUPPLY
340	Supply and laying pipe galvanized, “Medium grade”, including fittings of follwing dia complete with all fitting and fixtures concealed in wall/surface or ceiling or laying under ground
341	50 mm dia
342	40 mm dia
343	25 mm dia
344	20 mm dia
345	S&F Gun metal globe valve with iron wheel head ,screwed both ends for iron pipe and fixed of size 40 mm
346	S&F Gun metal globe valve with iron wheel head ,screwed both ends for iron pipe and fixed of size 50 mm
347	Supply and Fix Valve, stop, screwed, supplied and installed complete for size 25 mmdia pipe.
348	Supply and Fix Valve, stop, screwed, supplied and installed complete for size 20 mmdia pipe
349	Taking down old GI pipe of any size 40/50 mm dia etc. complete with all accessories incl removing materials to store for keeping in safe custody for taking creditand making good disturbed surfaces of walls, floors, etc complete all as specified and dircted.
350	Taking down old GI pipe of any size 20/25 mm dia etc. complete with all accessories incl removing materials to store for keeping in safe custody or for taking creditand making good disturbed surfaces of walls, floors, etc complete all as specified and dircted.
351	Taking down gun metal globe valve of any size and type incl removing materials to store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
352	EXTERNAL ELECTRIC SUPPLY
353	Supply and fixing/erecting of Tubular steel poles shall be swaged type & shall conform to IS 2713 (parts I to III) 1998. A through hole of 14 mm diameter shall be provided in each pole at a height of 300 mm above the planting depth for earthing arracngements, finials and with CI base plate and finial taper plug, bolts, nuts & screws as specified type 410 SP 31, (9.0 Mtr long) plate shall be of cast iron, protection against corrosion. The poles shall be coated with two coats of black bitumonous paint through out internally and externally up to the planting depth. The remaining portion of the exterior with one coat of red oxidepaint & two coat of aluminium paintandtwo coats of zebra marking with enamelled paint (Yellow & Black)from ground level to 1 mtr height including white washing to the coping and cleaning the bushes surrounding the pole bottom up to 1 mtr radius. Poles shall be numbered and the rate for above items shall be inclusive in the quoted rate complete all as spec ified and directed.Note All Earthwork and concrete work shal be measured and paid seperately under respective items involved in this schedule. (10 Nos for Drill lines )
354	Supply and FixingLED Street Light 70 Wattmade ofpressure die cast aluminum housingwith energy efficent LEDs,Direct modular IP lens,IP-66Protection,Potted driver with system efficiencyof 120 lumen/watt at system level, with GI bracket made out of 32/40 mm GI pipe medium grade and MS clamps for fixing of light fitting complete are included in quoted rate and connected with three coreinsulated PVC sheatedcoppercable from cable junction box to light fiiting all as specified and directed.
355	Supply and FixingLED FloodLight 70 Wattmade ofpressure die cast aluminum housing with energy efficent LEDs,Direct PC lens,IP-66Protection,Potted driverwith system efficiencyof 120 lumen/watt at system level with CCT 3000 K, including Fixing arrangmentfor fixing of light fitting complete and connected with three core 1.5 Sqmminsulated PVC sheatedcoppercable from specified pointto light fiiting all as specified and directed.(GCs Accn)
356	Supply and FixingLED FloodLight 200 Wattmade ofpressure die cast aluminum housing with energy efficent LEDs,Direct PC lens,IP-66Protection,Potted driverwith system efficiencyof 120 lumen/watt at system level with CCT 3000 K, including Fixing arrangmentfor fixing of light fitting complete and connected with three core 1.5 Sqmminsulated PVC sheatedcoppercable from specified pointto light fiiting all as specified and directed.(GCs Accn)
357	S&F in replacement LED post top lantern 40 W with die cast aluminium spigot, spun aluminium powder coated top cover, PDC heat sink, opal diffuser and clear acrylic, IP 65 with driver including connection complete flexible copper cable of size 1.5 sqmm 3 core all as specifeid and as directed. (GCs Accn)
358	S&F cable junction boxwith connection terminal , factory made of size not less than 210 mmx310 mmx111 mmwith IP66 protection made out of high quality thermoplastic poly corbonate having copperterminals, weatherproofwith metric knockout for cable entry, outdoor type fixed to pole with MS clamp made of MS flat 40x3mm including 01 No MCB SP 6Amp fixed on din rail MCB should be covered by poly corbonate transparent cover all as specified and directed.
359	M&Lin replacementsub main wiring with 2 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 2.5 Sq.mm. (nominal area) drawing in and including 20/25mm. dia PVC conduit medium duty concealed/surface (column/beam/ roof) conduit heavy duty accessories and fittingswith chasing/cutting complete with 1 run of copper conductor multistranded of size 2.5 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed including taking down old sub main wiring.
360	Supplying, laying in replacement, jointing and testing LT underground cable of size 35 sqmm 3.5 core heavy duty, 1100 Volts, PVC insulated and sheathed, armoured with multi-stranded aluminium conductor cable conforming to latest IS , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/ drains/culverts duly protected in galvanised steel pipe of suitable sizes all bare conductor of cable duly insulated 1.1 KV grade heat shrinkable sleeve including cable gland and lugging etc at both ends all complete all as specified and directed.
361	Supplying, laying in replacement, jointing and testing LT underground cable of size 10 sqmm 4 core heavy duty, 1100 Volts, PVC insulated and sheathed, armoured with multi-stranded aluminium conductor cable conforming to latest IS , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/ drains/culverts duly protected in galvanised steel pipe of suitable sizes all bare conductor of cable duly insulated 1.1 KV grade heat shrinkable sleeve including cable gland and lugging etc at both ends all complete all as specified and directed.
362	M&L for dry sand cushioning over and below the U/G cable laid (total depth of sand shall be 23cm punned till 18 cm) complete all as specified and directed by Engineer-in-Charge. Note : Punned thickness will be considered for measurement
363	M&L for providing old size sub class \"B\" bricks laid perpendicular to the cable abutting each other all as specified and directed by the Engineer-in-charge.
364	M & L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate for pole foundation, filling and mass concrete complete all as specified and directed.
365	M & L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate for foundationto pole coping including necessary formwork with fair finished surface complete all as specified and directed
366	M&Lfor 40 mm dia, 6 Kg pressure , HDPE pipewith all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete for 40 mm dia all as spd & directed
367	M& L for boring holes (manually) under road ,hard standing,without damaging surface for 40 mm dia GI pipe etc complete all as specified and directed.
368	M & L for road cutting for laying of LT UG cable / galvanised iron pipe complete all as specified and directed.
369	M&L for earthingcomplete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round the plateusing 4 mm dia GI earth wire as earth lead moulded and rivetted to earthplate at one end and connected to main equipment at switch/control board at another end, GI earth leadprotected in and including 15 mm dia GI ‘medium grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘medium grade’ as water pipe from earth chamber to upper edge of the earth plate,GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mmthick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as per electrical plate No.3 of SSR Part-II 2010 and testing on completion all as specified and directed. ( 02 Ext Electric + 50 Int Electric)
370	M & L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised steel or iron wire all as directed.
371	Supply, installation, commissioning and testing of factory made (CPRI approved) LT panel Board confirm standards of IS/IEC61439-1 & IEC 61439-2 of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening,and having provision for front and rear side opening with rubber beading, suitable size bus bar and mild steel cable glands for each cable to make it weather and vermin proof.double door hinged type,both side openable, air fins for ventilation, panel shall be mounted on ISMC Chanel of size (50 x 50 x 6 mm) & duly spray paintedinternally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs suitable long each duly grouted in plaincement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) incl all connections incoming / out going completeand comprising of the followings and specified hereafter:-(01 nos - Raman Hall, 01 nos - Drill mess.)
372	(i) Aluminium bus bar not less than375 Amps current rating capacity comprising of 4 Aluminium strips of appropriate size provided with heat shrinkable sleeve not less than one mm thick.(ii) Cable Alley for I/C 250 Amps and 5 Outgoing feeders(iii) INCOMING:- (a) MCCB 4 Pole, 250 Amps ,415 Volt of breaking capacity 35 KAwith Adjustable Thermal and Adjustable Magnetic- 02 Nos.(b) On load Change over 4 pole 415 V 250 Amps-01 No(iv)OUTGOING:- (a) MCCB 4 pole, 100 Amps, 415 Volt of breaking capacity 25 KAwith Adjustable Thermal and Fixed Magnetic -04 Nos(v) MCCB 4 Pole 40 Amps, 415 Volt of breaking capacity 25 KA -01 Nos(vi) MCB SPN 240 Volt ,32 Amps-01 Nos(vii) Voltmeter 0 -500 volts digital type with selector switch.- 01 No(viii) Ampere Meter 0-200 Amperes,digital type, CT connected with suitable CTs and selector switch-1 No (ix) Phase indicator, LED type -Set of Three
373	Supply, installation, commissioning and testing of factory made (CPRI approved) LT panel Board confirm standards of IS/IEC61439-1 & IEC 61439-2 of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening,and having provision for front and rear side opening with rubber beading, suitable size bus bar and mild steel cable glands for each cable to make it weather and vermin proof.double door hinged type,both side openable, air fins for ventilation, panel shall be mounted on ISMC Chanel of size (50 x 50 x 6 mm) & duly spray paintedinternally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs suitable long each duly grouted in plaincement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) incl all connections incoming / out goingcomplete all as specified and comprising of following and specified hererafter :-(07 nos - Drill lines.)
374	(i) Aluminium bus bar not less than200 Amps current rating capacity comprising of 4 Aluminium strips of appropriate size provided with heat shrinkable sleeve not less than one mm thick.(ii) Cable Alley for I/C 125Amps and 5 Outgoing feeders(iii) INCOMING:- (a) MCCB 4 Pole, 160 Amps ,415 Volt of breaking capacity 25 KAwith Adjustable Thermal and FixedMagnetic- 02 Nos. (b) On load Change over 4 pole 415 V 160 Amps -01 No (v) MCCB 4 Pole 40 Amps, 415 Volt of breaking capacity 25 KA -01 Nos(vi) MCB SPN 240 Volt ,32 Amps-01 Nos(vii) Voltmeter 0 -500 volts digital type with selector switch.- 01 No(viii) Ampere Meter 0-200 Amperes,digital type, CT connected with suitable CTs and selector switch-1 No (ix) Phase indicator, LED type -Set of Three
375	Supply, install, testing & Commissioning of automatic street light control system of 25A suitable for automatic switching of Street lights of 240V, 50Hz,Controller shall have following function -(a) Controller shall be automatically switch on the street lights as programmed time setting and astro function.(b) Controller shall be automatically switch off the street lights as programmed time setting and astro function. FollowingComponents shall be fitted in a enclosure, wired and programmed for complete function. 1 No. 25A, 4pole MCB in thermal magnetic release for overload and shortcircuit protection. 1Nos 3 position (auto - off- manual) 25A, 4pole modlar type contactors. Phase indication Lamps R+Y+B 230/400V, Astonomical time switch of Switching Capacity 16A, ohmic 250V AC, at PF-1, having minimum running reserve 5 years/43800 hours and clockprecision 0.1sec./day, having facility of location programing by city name or geographical coordinates , offset time+/- 120 minute relative to sunrise/sunset.( 02 NosGCAccn, 01No ACC Wing, 01 Nos Drill Mess, 01 No Drill Lines))
376	M&L forPVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt, 2.5 sqmmx 3 core conforming to IS 694 for connection of flood lights and burrial lights etc.
377	SEWAGE DISPOSAL
378	Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
379	Demolition and breaking up drain pipes 150mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar
380	M & L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation of man hole concretecomplete all as specified and directed.
381	M&L for Concrete bed type C-2 1:3:6 for drain pipes of 150mm boreincluding packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed
382	M & L brick work with old size sub class B brick straight or curved on planexc. 6.00 M mean radius built in CM 1:4.
383	S&F 150mm boreReinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed.
384	M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed/benching to manhole, complete all as specified and directed.
385	M&L Extra for forming fair finished drain or channel 30 cm inner girth on cement concrete using extra cement incl forms, mould etc.
386	M & L PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in coping including all necessary formwork.
387	M&L Rendering 15 mm thickin CM 1:4 on brick surfaces of Manhole and finished the surface even and smooth without using extra cement using WPC.(WPC Shall be meassured in separate item).
388	M&L for precast cement concrete type B-1 1:2:4 (20 mm graded stone aggregates) set in Cm (1:4) in cover slab and similar work including formwrok Notes : Reinforcement shall be measured masured and paid seperately
389	M&L TMT bars 8 mm dia as in reinforcement cut to length, bent to shape as required including cranking bending and binding with MS wire n.less than 0.9mm dia
390	AREA DRAINAGE
391	M&L for cement concrete type C-2 1:3:6 (using 20 mm graded stone aggregates as in surface channels and drains
392	M&L Extra for forming fair finished drain or channel for 45 CM inner girth in cement concrete, using ex- tracement, including forms, moulds, mi-tred/stopped ends etc.
393	M&L for TMT bars 10 mm dia and over, cut to lengt, bent to shape required including cranking, bending spirally for hooping for columns, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips
394	BOUNDARY WALL
395	M&L for cement concrete type D-2 1:4:8 (using 40 mm graded crushed stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed.
396	M&L for rendering 15 mm thick in Cement mortar (1:4) on fair faces of stone masonary/concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed.
397	M&L for rendering 15 mm thick in Cement mortar (1:4) on unfair faces of stone masonary/concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed.
398	Preparation of newsteel surfaces of any description, over 10 cm in width or girth and applying two coat of synthetic enamel paint with approved shade over a coat of red oxide primer complete all as specified and directed.
399	M & L Framed work such as grills, gratings, etc.. with ends of barsshouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as directed.
400	M& L for Providing precast cement concrete louvres and jallies,35mm thick type B-0 1:2:4 (12.5 mm graded aggregate) set in CM 1:4 (measured solid), including all mould- ings but excluding frame.
401	M&L for applying two coats of weather proof exterior emulsion paint (Apex of Asian, weather coat of Berger) of tint over a priming coat on wall, chajjas, facia etc complete all as directed. Note : The work will be carried out upto double storey building.The rate of scaffolding is included for this item also.
402	INTERNAL ELECTRIFICATION
403	Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc. complete all as specified and directed.
404	M&L for point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS-H ,new concealed PVC conduit medium grade not less than 20 mm dia,conduit fittings and all accessories with suitable size of anodisedGI metal flush box, for mounting of Modular switches, sockets, fan regulator etc,including modular flush box, modular frame and modular white cover plate as top cover, including contineous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS-H up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of the following. Note: (a) Colour code shall be maintained as per IE rule (b) Old existing concealed conduit & inspection box may be used for RCC slab/ Roof only.( c) Quoted rate also deem to be included cost of cutting chases for wiring.
405	One light/bell point controlled by one,one way switch.
406	One ceiling fan/Exhaust fan point controlled by one,one way switch through Regulator.
407	One three pin 5 Amp socket on same board with other switches.
408	One three pin 5 Amp socket on independent board
409	One light point controlled by two way switch
410	All as per item No.404 above but with stranded copper conductor 2.5 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 markedfor 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.
411	All as per item No 404 above but AC/Geyser point with table 4.0 Sq mm size, with earth continuity coductor of size 4.0 Sq mm.(One circuit for one point only) complete all as specified and directed.
412	Supply and fix modular switch 1 way 6/10 A, 1 Module complete all as specified and directed.
413	Supply and fix modular switch 1 way 16/20A, 1 Module with indicator lamp complete all as specified and directed.
414	S&F Modular switch 2 way 6A,1 Module SP 230 V AC complete all as specified & directed.
415	Supply and fix modular bell push 6A, 1 Module complete all as specified and directed.
416	Supply and fix modular socket 6/10A, 2/3 pin combined 2 Module complete all as specified and directed.
417	Supply and fix modular socket 16/20A, 2/3 pin combined 2 Module complete all as specified and directed.
418	Suply and fixfor Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and directed.
419	Material and labour for ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as specified and directed.
420	S&F lamp holder PVC/polycarbonate B22 type, 230 V AC complete all as specified and directed.
421	S&F in replacement of distribution boards epoxy powder coated TP & N 12 ways (VTPN MCCB DB) with metal door (IP 54 IK 09 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 250 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts includingone MCCB 415 Volt 36 KA, 4Pole, 250 Amp magnetic release adjustable typeas incoming and for any combination of SP/TP MCBs for outgoings complete including disconnecting and taking down existing DB complete all as directed. (For Main DB at stair case of 02 GCs Accns)Note: (i) MCCB 4P 250A, 36 KA magnetic release incoming MCBS are deemed to be included in quoted rates. (ii) The outgoing MCB will be measured and paid separately under relavant items of this schedule.
422	S&F MCB 415 Volt 16 KA TP 100 Amp \"B\" series magnetic release adjustable range as outgoing with fixing arrangement complete all as specified.
423	Supply & fixing in replacementand Testing TP & N Vertical load line (VTPN) 4 way 415 Volts 50 Hz indoor type double door sheet metal enclosure IP-43 DB\"sIK-09 flush mounted with insulated Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable management including for provnof MCCBas in comer including connecting terminal strip complete and SP MCBs as out going etc complete pre wired with suitable size copper conductor. The DB\"s shallhold type test certificate as per IEC 61439-3 complete all as specified and directed by Eng-in-charge including taking out old unserviceable DB and removing from site. (Note :- MCB/ MCCBshall be measured and paid separately)
424	S&F in replacementsheet metal enclosures 240 voltwith 100 ampsrated shorting copperbus bar for double door 8 way IP-43DB\"s IK -09 with acralic door suitable for one MCB SPN as incoming and 6 MCB SP as out going,mounting flush on wall and making good disturbed surfaces complete all as specified and directed by Engr-in-charge, including taking down old unserviceable DBs . (Note:-MCBs shall be measured and paid separately).
425	S&F in replacementsheet metal enclosures 240 voltwith 100 ampsrated shorting copperbus bar for double door 12 way IP-43DB\"s IK-09 with acralic door suitable for one MCB SPN as incoming and 10 MCB SP as out going,mounting flush on wall and making good disturbed surfaces complete all as specified and directed by Engr-in-charge, including taking down old unserviceable DBs . (MCBs shall be measured and paid separately).
426	S&F MCB double pole 240 Volt 10 KA 40-63 Amp \"B\" series conforming to ISI marked complete all as specified & directed .
427	S&F MCB single pole and240 volt 10 KA 5-32 Amp \"B\" series conforming to ISI marked all as specified and directed .
428	S&F MCB single pole and240 volt 10 KA 40 Amp \"B\" series conforming to ISI marked all as specified and directed .
429	S&F MCCB 415 Volt 16 KA 4 pole 63 Amp magnetic trip release along with factory madesheet metal enclousres with fixing arrangement complete all as specified and directed.
430	S&F MCCB 415 Volt 16 KA 4 pole 100 Amp magnetic trip release & setting as incoming with fixing arrangement complete all as specified and directed.
431	Supply & fix in replacment LED Batten(4 ft)with aluminum extruded channel(housing) and polycarbonate diffuuser for glare free light with input power 20 Watt, system efficiancy not less than 100 lm/watt with in builtsurge protection not less than 2.0 KV with acessories like both side end cap, driver, holder,screwincluding LED light with three core flexible sheathedcopper conductor cable of suitable size to connect with ceiling rose complete all as directed.
432	S&F2\"x2\"fully diffused recess mounting LED luminaire made up of CRCA body having minimum 3600 lumen with efficacy of 120 lm/watt,Driver must have surge protection of 2.0 KV,suitable for Armstrong/Grid Ceiling complete as required includung all connections with three core flexible copper conductor cable of suitable size, Minimum Two years warranty should be provided. Note :- Design of lights will be approved by the GE
433	S&F LED light fitting mirror type with aluminum housing and polycarbonate diffuuser 2 feet ,10 watt 220V AC decorative type with acessories like both side end cap, driver, holder,screwincluding LED light with three core flexible sheathedcopper conductor cable of suitable size to connect withceiling rose complete all as directed. .
434	S&F Decorative, wall mounting, brushed nickel finish fixture with opal glass diffuser suitable with 9 W LED lamp B22 base with and including one No 9 watt LED bulb. complete with accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size. MakeHavells Floretine WL 1LS B22 SS or equivalant
435	Supply and fixing Round recess mounted LED down light fitting made up of pressure die cast aluminium body having minimum 1200 lumens with the efficacy of 100lm/watt suitable for Armstrong/Grid ceilingMake PHILIPS cat no. DN296B LED12S-6500 PSU WH or equivalant Note :- Design of lights will be approved by the GE
436	Supply and fixing Round recess mounted COB LED( spot) light fitting made up of pressure die cast aluminium body having minimum 1200 lumens with the efficacy of 100lm/watt suitable for Armstrong/Grid ceiling .Note :- Design of lights will be approved by the GE
437	S&F in replacementof LEDBulkheadLightwithaluminum housing and polycarbonate opaldiffuuser with input power 10 Watt, IP-65 ,system efficiancy not less than 100lm/watt & inbuiltsurge protection not less than 2.0 KV with acessoriesconnecting up with three core flexiblesheathedcopper conductor cable of suitable size from ceiling rose complete all as directed.
438	S&F ceiling fans complete with Aluminium blades ,down rods ,electronic regulator and accessories ,230 V ,1200 mm sweep.Min air delivery 225 CMM with service value nnot less than6.00 ,BEE Five Star Rated with Brushless Direct Current(BLDC) Motor. Note: (1) Rate for taking down and trasportaion to deposit at E/M storeyard to ceiling fan deemed to be incuded in this rate.
439	S&F electric water heater storage type ABS outer body and glass line coated inner tank suitable to withstand 8 bar pressure and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated with LED temp Indicator and integrated shock safe plug complete with all accessories such as safety valve, thermostate, NRV, Fixing bolts, stainless steel braided connection piece 450 mm long etc as specified by EIC.
440	S&F sheet steelenclosure with 20 Amp Modularsocket ,Cover Plate,20 Amp Plug top and Modular20 Amp MCB SP 10 KA ( ready plug & play all-in-one device) complete all as specified by EIC.
441	S&F exhaust fans complete with Blades,frames & louvers etc with steel body AC single phase 230 Vof size 300 mm sweep and speed not less than1400 RPM with double ball bearing ,100% copper winding motor all as specified by EIC . Note:(1) Rate for taking down and trasportaion to deposit at E/M storeyard incl making hole of suitable size deemed to be incuded in this rate.
442	Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1400, Copper winding of sweep 250 mm. Note:(1) Rate formaking hole of suitable size deemed to be incuded in this rate.
443	Supply and Fixing in replacementIntegral LED Street Light Luminaire comprising of high pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 35/40 wattwith efficiency120 lumen/wattincluding GI brackete made out of 25/32 mm GI pipe medium grade and MS clamps for fixing of light fitting complete and connected with twin core PVC insulated copper flexible cable with existing point all as specified and directed.
444	Taking down old unserviceable sub main/LAN/TV/telephone wiring of any size and type including all connecting accessories. The rate for making goodto the damaged surfaces of the wall or floor are deemed to be included in quoted rate.
445	M&Lin replacementsub main wiring with 2 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sq.mm. (nominal area) drawing in and including 20 mm. dia or higherPVC conduit medium duty concealed, conduit heavy duty accessories and fittingswith chasing/ cutting and Insulated unsheathed FRLS-H cable copper conductor multistranded of size 4.0 Sqmm as earth wire upto common earth and connected to earth dolly complete all as specified & directed.Note :- (a) Colour code shall be maintained as per IE rule (b) Old existing concealed conduit & inspection box may be used for RCC slab/ Roof only.( c) Quoted rate also deem to be included cost of cutting chases for wiring. (d)Quoted rate also deem to be included cost of cutting chases for taking out old concealed conduit/ casing capingand taking down old submain wiring
446	M&Lin replacementsub main wiring with 2 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sq.mm. (nominal area) drawing in and including 20 mm. dia or higherPVC conduit medium duty concealed, conduit heavy duty accessories and fittingswith chasing/ cutting and Insulated unsheathed FRLS-H cable copper conductor multistranded of size 6.0 Sqmm as earth wire upto common earth and connected to earth dolly complete all as specified & directed.Note :- (a) Colour code shall be maintained as per IE rule (b) Old existing concealed conduit & inspection box may be used for RCC slab/ Roof only.( c) Quoted rate also deem to be included cost of cutting chases for wiring. (d)Quoted rate also deem to be included cost of cutting chases for taking out old concealed conduit/ casing capingand taking down old submain wiring
447	M&Lin replacementsub main wiring with 4 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 10 Sq.mm. (nominal area) drawing in and including 20 mm. dia or higherPVC conduit medium duty concealed, conduit heavy duty accessories and fittingswith chasing/ cutting and Insulated unsheathed FRLS-H cable copper conductor multistranded of size 10.0 Sqmm as earth wire upto common earth and connected to earth dolly complete all as specified & directed.Note :- (a) Colour code shall be maintained as per IE rule (b) Old existing concealed conduit & inspection box may be used for RCC slab/ Roof only.( c) Quoted rate also deem to be included cost of cutting chases for wiring. (d)Quoted rate also deem to be included cost of cutting chases for taking out old concealed conduit/ casing capingand taking down old submain wiring
448	Taking down old unserviceable LT UG cable of any size and type including all connecting accessories. The rate for making goodto the damaged surfaces of the wall/floor/ground/road are deemed to be included in quoted rate.
449	Supply and lay cable XLPE insulated screened PVC bedded,galvanised steel strip or wire armoured,electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 4 core
450	Supply and lay cable XLPE insulated screened PVC bedded,galvanised steel strip or wire armoured,electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 4 core
451	S&F Modular LAN socket (RJ 45 Computer Socket Cat 6) 01 Module size socket with inner and outer frame plate matching with surrounding for mounting modular LAN socket as per site requirementcomplete all as directed.
452	S&F of modular TV socket complete with modular plate including modular frame fitted on modular GI metal box of 1/2 module.
453	S&F Junction box (1 to 4 way) comlete all as spd and directed.
454	S&F LED basedBollard lights 15 watt 230 volts AC outdoor type with aluminum pipe housing with mushroom shapeglare free PMMA diffuser,10000 mm heightand high LumenIP-65 protection complete with driver and lamp complete.
455	S&F LED wall mounted metal and Synthetic LED Bedside Black study lamp 3.0W, 4V, adjustable arm including connecting up with three core flexible copper conductor cable of suitable size.
456	Supply and fixing Panel light 4\"x1\" 28 watt, 220V AC surface type with high efficiancy SMD LED & PMMA diffuser soft glare free light complete with drivers, LED lamp suitable for roof, including connecting up with driver three core flexible copper conductor case of suitable size complete.Note :- Design of lights will be approved by the User/GE
457	S&F LED light fitting 1x07 Watt picture wall light with driver, Bronze finish for superior feel Metallic body, Warm White 3000K with good Color rendering (CRI>80), Flexible neck for adjusting beam, product dimension 13.9L x 7.1W x 3.7H Centimeters connecting up with three core flexible copper conductor cable of suitable size complete.
458	S&F LED profile/strip lightsPHILIPS Led Strip Polycarbonate Profile Shine 240 LEDs per meter , White/WW/Blue/Red 220V AC decorative type with driver, connector, diffuser cover with accessories & holder and including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.Note :- (i)Quoted rate also deem to be included cost of Al profile channel with milky cover as directed for LED strip suiable for cove lighting,edge lighting & recessed linear lighting in ceiling/Roof.
459	S&F high efficiency LED Bulb12W Bulb B-22 Typecomplete all as specified and directed.
460	M&L for cutting, chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth.
461	M&L for TV Wiring with Co axial RG-6 heavy duty PVC insulated, PVC sheathed cable having single strand of 0.7 mm dia taped in concealed PVC conduit suitable for television wiring including all necessary connections from terminal box to TV socket, drawn in separate concealed PVC conduit complete all as directed.
462	M&L for LAN Wiring with UTP CAT 6 computer LAN Cable with star seperater PVC insulated, PVC sheathed cable having single strand suitable for LAN wiring including all necessary connections from terminal box to Telephone socket, drawn in separate concealed PVC conduit complete all as directed.
463	Supply install testing and commissioning of 16PORTPatch Panel complete with accessories and RJ 45 plug etc, as specified and required for complete connection.
464	S&F rigid non-metallic PVC conduit of 20mm external dia, exclusive of boxes (Junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing of accessories such as couplers, lock nuts, saddles, pipe hooks etc
465	Supply and Fixing of electric chimney with autoclean function with min 900mmx750mmx600mm (width) dimensions having suction power of inlets 1300 Cum/hrs, motor warrany 3 years with power consumption 180W, 230V, 50Htz having 3 speed gesture movement in black coated CRCA material and to be installed with proper aluminium/GI hood suitable size length as recommended by manufacturers from electric chimney to outside of bldg.
466	M& L forflame proof concealed point wiring on wall and surface wiring on ceiling /roof with neccessary fixing arrangment with multistranded PVC-FRLScopper conductor 1.5 Sq. mm (nominal area), single core,insulated and unsheathed stranded wire 1100 Volts gradedrawn in & including16 gaugestove enameled ERW rigid steelconduit(Metalic) not less than 19 mm dia with all MS conduit accessories forlight points controlled by one Switch , includingmultistranded PVC-FRLScopper conductor 1.5 Sq. mm (nominal area), single core,insulated and unsheathed stranded wire as earth continuity conductor up to common earth and connecting to earth dolly for one flame proof light point /Exhaust fan point. Note:-(i)Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.(ii) Junction Boxes shall be measured separately
467	S& F flame proof rotary type with termination box in LM6, 16 Amp, single pole 250V.
468	S& F flame proof threaded type junctionbox in LM6,Al alloy 2 Way complete all as specified
469	S& F flame proof threaded type junctionbox in LM6,Al alloy 3 Way complete all as specified
470	S& F flame proof threaded type junctionbox in LM6,Al alloy 4 Way complete all as specified
471	M& L forflame proof concealed point wiring on wall and surface wiring on ceiling /roof with neccessary fixing arrangment with multistranded PVC-FRLScopper conductor 2.5 Sq. mm (nominal area), single core,insulated and unsheathed stranded wire 1100 Volts gradedrawn in & including16 gaugestove enameled ERW rigid steelconduit(Metalic) not less than 19 mm dia with all MS conduit accessories for15 Amp socket outletcontrolled by one Switch , includingmultistranded PVC-FRLScopper conductor 2.5 Sq. mm (nominal area), single core,insulated and unsheathed stranded wire as earth continuity conductor up to common earth and connecting to earth dolly. Note:-(i)Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.(ii) Junction Boxes shall be measured separately
472	S&F Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth as specified
473	Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable.
474	Supply and Fixing of Flameproof cum Waterproof LED Bulk Head light fitting of 15W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen \"A\" clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size.
475	S & F flame proof exhaust fan 300 bmm sweep heavy duty 230 volts single phase 1440 rpm along with louver shutter all as specified and directed.
476	M&L for Earthing complete with copper earth plate electrode 600×600×3.15mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to copper earth lead strip 20x3 mmby means of bolts, nuts, check nuts and washers of copper / brass all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. ( for Lighting protection system). Note : 1. Upto 7.5 Mtr copper strip included in quoted rate for earthing. (2). On testing after completion if the desired earth resistance (ie 5 Ohm) is not obtained the earthing will be redone at no extra cost.
477	Supply and fixing of earth continuity conductor ie 25x4 mm AluminumStripfixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipeor any other indicated situationas required, fixedwithsaddles / insulators at 50cm distance, complete all as specified and directed. Note :-Quoted rate also deem to be included cost of saddles / insulators.
478	M&L Test point terminal block made of gun metal or phosphorus bronze of size 75x75x25mm, drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screws, complete all as specified and as directed.
479	Material & labour for lightening conductor assembly made out of GI pipelight grade of size 50 mm bore along with welded flange at one end & GI reducer socket 50 x 40mm at another end connected with GI pipelight grade of size 40 mm borewith one end GI reducer socket to connect air termination & connector for earth strip duly fixed with necessary nuts bolts & washers in PCC 1:2:4 type of suitable size as per site requirmentcomplete all as directed by Engr-in-chargeNote : GI pipe 40/50mm & air temination shall be measured & paid separately under relevant items
480	Supply only GI pipe light grade of size 40 mm bore for erection of lightening conductor complete as required and directed by Engineer-in-Charge.
481	Supply only GI pipe light grade of size 50 mm bore for erection of lightening conductor complete as required and directed by Engineer-in-Charge.
482	Supply & Fixing air termination Aluminium rod 20 mm dia, 300 mm long for lightening conductor.
483	EARTH WORK FOR WHOLE WORK
484	Excavation in trenches not exc1.5 min depthandnot exc 1.5 mtr wideincludinggetting out in any type of soil complete all as specified and as directed.
485	Returning filling in including levelling spreadingwatering and well ramming in layers not exceeding 25 cmthick in soft/loose soilcomplete all asspecified and directed .
486	Removing of surplus soil to a distance exceeding 250 mtr not exceeding 500 mtrand depositingwhere directed at a level not exceeding1.5 mtr above the starting point complete all as specified and as directed.
487	Removing of surplus soil to a distance not exceeding 50 mtrand depositingwhere directed at a level not exceeding1.5 mtr above the starting point complete all as specified and as directed.
488	Quantities of certain items of respective schedule have been merged in the same items of other schedule & will be measured and paid accordingly.
489	Note : Tenderers may note that amount of credit Rs 31,78,482.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttarakhand Tenders

Construction Tenders

Turnkey Projects Tenders

Infrastructure Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Provision Of Office Complex And Store Rooms For One Battalion And Addition Cum Special Repair To Training Infrastructure And Allied Facility For Officer Cadets Including Lady Cadets At Ima Dehradun, Dehradun-Uttarakhand

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Provision Of Office Complex And Store Rooms For One Battalion And Addition Cum Special Repair To Training Infrastructure And Allied Facility For Officer Cadets Including Lady Cadets At Ima Dehradun, Dehradun-Uttarakhand

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us