|
| 1 | S&F of Aluminum composite panels / PVC louvers of Al strong make for external wall cladding at all levels with all necessary Aluminum member frame works at all heights and elevation fixed on to the supporting brick masonry/ RCC frame, fastening material and hardware complete with all labour, material, equipment, handling, transportation, workmanship, preparation of shop drawings, staging, scaffolding, etc, all complete. The work shall also include for providing structural glazing with 12mm or more thick toughened glass of approved colour, to match with existing elevation of the building. The payment for structural glazing shall be all as per ACP panelling work only. Contractor to quote the rate after due estimation of ACP panelling portion and Glazing portion as per site. Work is to be executed as per approved shop drawings and Instructions of the Engineer-in-Charge. The aluminum composite panel should consist of 3mm thick thermoplastic core of anti oxidant LOPE sandwiched between 2 skins of 0.5mm thick aluminum alloy sheet making a total panel thickness of 4mm. The surface shall be finished with PVDF based coating of minimum 30 micron on the topsides and services coating on the reverse side shall be with polymer paint. The surface shall be protected with self adhesive peel off masking foil. The system shall be designed to withstand a wind pressure of 150kg/Sqm and shall be fixed to the Masonry/RC frame with necessary clamps, brackets and anchor fasteners. All clamps and brackets shall be hot dip galvanized minimum 80 microns thick and shall conform to IS: 4759-1996. The extruded aluminum section shall be anodized in approved colour with anodic coating of minimum 20 microns. Extruded section shall be 6063 T5 or T6 alloy conforming to ASTM B221. Any other festering straps, nuts, bolts, rivets, washers, etc. shall be in stainless steel SS304 grade Including providing open cell polyethylene backer rods, weather sealant etc. The weather sealant shall be Dow Corning 688/795 or equivalent. All the work shall be as per Manufacturer\"s specifications and approved shop drawings.Note: The rate quoted shall include for preparation of 3D design / drawings of the building with ACP panelling / glazing and UPVC window. The work shall commence only after the Digital model of the building with ACP panelling and UPVC windows is approved by GE / Engr-in-charge. |
| 2 | Taking down Chowkhats or frames (without taking off shutters from frame) exc 1.5 sq.m but n exc 4 sq.m each |
| 3 | M&L for toughened glass 12mm thick as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required. |
| 4 | M&L for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) in double frame pattern suitable for grooved type of flase ceiling to facilitate aesthetic lighting, design as approved by Accepting officer to flat surface over 2nd class soft wood fillets or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately). Contractor shall be well versed with the typical design of the false design. The details of the design may be obtained from Contract section. The area of false ceiling shall be measured flat with double framing. |
| 5 | M&L for GI frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. |
| 6 | Taking down Chowkhats or frames (without taking off shutters from frame) exc 1.5 sq.m but n exc 4 sq.m each |
| 7 | M&L for preparation of old treated surfaces and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/ 10sqm) applied over 3mm external wall care putty including complete removal of existing treatment all as specified. |
| 8 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete |
| 9 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite |
| 10 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 11 | Providing and fixing factory made uPVC coloured fixed window as approved by Accepting Officer Area exceeding 2.00 sqm made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.) |
| 12 | Providing and fixing factory made uPVC coloured Sliding window as approved by Accepting Officer Three track Area exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 13 | S&F for Veneered decorative plywood 12mm thick, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with screws to timber frame work |
| 14 | M&L for Providing and fixing factory made uPVC coloured casement (Openable) Door as approved by Accepting Officer made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 15 | M&L for preparation of old decorated surfaces including for peeling of old putty, scrubbing the surfaces to remove all the loose particles and applying 2 mm thick wall care putty,a coat of primer and applying two coats of oil bound distemper on walls complete all as specified and as directed. |
| 16 | M&L for preparation of old decorated surfaces and applying one coat of plastic emulsion paint onwalls after filling all holes and cracks with wall care putty complete all as specified and as directed . |
| 17 | M&L for 600mm x 600mmx 10mm thick Endura tiles any colour or any pattern in floors and vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 20mm thick screed bed or bedding layer in cement mortarCM (1:6) and 100mm thick concrete beneath including dismantling of old tiles and concrete from its position complete all as specified and directed.(Make : Johnson Endura tiles or equivalent in make as listed in List of Manufacturers) |
| 18 | M&L for Figured glass 5mm thick, pin head type and glazing with oil putty in squares exc 0.5 sq. m in eachpane |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 20 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed. |
| 21 | M&L 10 mm thick Screed bed or beddding layer of CM 1:4 over 20mm thick PCC 1:2:4 (12.5mm graded aggrgate) in for laying floor finishes. |
| 22 | M&L for Vitrified Ceramic tiles dark shade / double charged / ultra charged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 23 | M&L for Glazed ceramic coloured tiles in vertical surface 600 X 1200 X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick backing coat 1:3all specified and directed. |
| 24 | S&F of 12mm thick bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with a provision of LED light strip all around the mirror. The control shall be touch operated on the mirror. |
| 25 | S&F in repair wall mounted single piece EWC white colour with P/S trap white coloured with and including PVC white coloured seat cover including all connecting to flushing cistern including for S&F in repair single Piece Slim Concealed Cistern with Wall Mounting Frame, Installation Kit and “P- Type or S-Type” Drain Pipe Connection Set for Wallmounted WC (with Flush Control Plate) (Make : CERA Cat No S1013142 or equivalent for single piece WC and flushing cistern) |
| 26 | S&F in repairs Health Faucet with 1 meter CP flexible tube & hookand all necessary fittings all as specified and directed. (Make: Jaquar Cat No 573 or equivalent of make listed in list of manufacturers ) |
| 27 | S&F in repair counter top wash basin including making good wall or floor fitting to match existing surface complete all as specified and directed. (Make: Jaquar Cat No 35935 or equivalent of make listed in list of manufacturers) |
| 28 | S & F in repair 40mm dia brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixedcomplete all as specified and directed. |
| 29 | S & F in repair 40mm dia brass chromium plated bottle traps for urinal with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed includig for removal of old connections complete all as specified and directed. |
| 30 | Supply & fix in pillar tap with 200mm long extension body cast copper alloy with capstan head, fancy type, chromium plated screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe & fixed, complete15 mm dia suitable for WHB complete all as specified and directed by Engr-in-Charge.(Make : Jaquar Cat No 10001 or equivalent of make listed in list of manufacturers ) |
| 31 | S&F in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterflyhandle screwed both ends etc complete all as specified and as directed .(Make : Jaquar Cat No 10053 or equivalent of make listed in list of manufacturers ) |
| 32 | S&F in repair chromium plated fancy type2 way bib tap 15mm complete at any position etc complete all as specified and as directed. |
| 33 | M&L for Pre-cast cement concrete Type C1 1:3:6 (20mm graded aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4, complete |
| 34 | S&F PVC connections 15mm size with PTMT nuts of length 300mm |
| 35 | M&L for preparation of old painted surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of plastic emulsion paint. |
| 36 | Taking down carefully copper/aluminium point wiring (light,fan socket or power ) point complete,including fixtures and fittings such as switches, ceiling rose, pendents, regulators, sockets, tube light fitting,main switch,MCB and DB\"s etccomplete all as specified anddirected. |
| 37 | M&L for point wiring with 1.5 Sq mmsingle corePVC insulated unsheathedcopper FRLSH multi stranded conductor cable in andincludingConcealed PVC conduitof size 20/25mm ISImarked inclusive oftees ,bend ,elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc withwhite laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi strandedcopper conductor 1.5Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminalincludingcutting, chasses and makinggooddisturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :- |
| 38 | (a) One light point / fan point controlled by one switch. |
| 39 | (b) One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board . |
| 40 | (c) One 5 pin 6 amps socket point controlled by one 6 amps switch on same board . |
| 41 | All as per item No.2 above, but point wiring with 2.5 sqmm and earth conductor of size 1.5 sqmm complete all as specified and directed for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switchon independent board. |
| 42 | Supply & fixing modular type switch 6 Amps ,1way,1 module. |
| 43 | Supply & fixing modular type switch 16 Amps ,1way,1 module . |
| 44 | Supply & fixing modular type socket 6 Amps, 2/3 Pin combined 2 module . |
| 45 | Supply & fixing modular type socket 6 A/16 Amps, 6 Pin combined 2 module. |
| 46 | Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body |
| 47 | Supply &fix modular type fan regulator stepped type 120 W- 2 module. |
| 48 | Supply and fixing LED lights fitting 1x 22W, 220V, 4\" long AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 49 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 50 | Supply and fix round type Unique slimmest recess com surface panel, solution to provide variable cutout size for installation in recess 18 W LED complete all as specified |
| 51 | Supply and fix Track mounted 10 W LED light with modern design, compact size with High power COB LED to provide focussed light. Track light is a method of lighting where light fixtures are attached anywhere on a continuous track rail which is electrically charged as compared to the need of routing electrical wiring to individual light position complete all as specified and directed. |
| 52 | Supply, fix and testing customisable,flexible colour cordinated LED strip lightmtr in length,(WW/CDL/NW/RGB) or color as per site requirement, 24 watts with driver, 120 LED/mtr with light travel function wide viewing angle with an IR remote control for good light distribution including superior adhesive for ease of installation on wall/ceiling/TV cabinates etc.including connecting arrengments as per site requirement complete all as specified and directed.Make: Philips/Havells/CromptonNote: Drivers, strip connectors and neccessary connecting items shall be included in quoted rates. |
| 53 | Supply and fix Decorative, surface mounted conical shape fixture20W LED Filament Lamp complete all as specified. |
| 54 | Supply and fix in repair, factory made, sheet metal enclosure, singledoor, 240 volts, AC,SPN, vertical distribution board, 16 way, painted with epoxy based powder coated suitable for mountingMCB as incomer of rating upto 40Amps, FP, 16-36 KA and MCB SP /TP as outgoings and complete withand including 200 amps rated copper busbar, neutral bar,earth bar, connecting cable links with and including top and bottom removable gland plate, complete withIP 43 protection,all as specified and as directed. |
| 55 | Supply & fix for MCB SP 6 to 32 Amps 10 KA,\"C\" seriescomplete all as specified and directed. |
| 56 | Supply & fix MCB DP 40 Amps 10 KA,\"C\" series complete all as specified and directed. |
| 57 | Material and labour for submain wiring along with earth wire using 2 X 2.5 sq mm(colour coading) + 1X2.5 sq mm earth wire(green colour) of single core PVC insulatedmultistranded copper conductor1100 Volts grade FRLS type in and including PVC conduit medium grade not less than 25 mm dia with all conduit accessories concealed in wall/ceiling/beams/column etc. completeall as specified |
| 58 | Taking down ceiling/Exhaust fan/wall fans,from its positionandkeeping aside in safe custody for servicing and unserviceable fan shall be deposited in MES store yard |
| 59 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 60 | Supply and fix exhaust fanAC single phase 230/240Volts of size 300 mm sweep with louver. |
| 61 | Cutting the existing surfaceof wall on brick/stone masonaryfor making round holeat any heightsuitable for fixing 380/300 mm sweep exhaust fan andmaking good the distrubed surfaceand matching with existing surface complete all as specified and directed. |
| 62 | Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mmdia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion |
| 63 | Supply and fixing in repairs LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with all accessories and necessaryfixing arrangementon wall at any height includingthree core 0.5 sqmm copper cable from connector to fitting and removing old unserviceable item complete all as specified and directed. |
| 64 | Supply and fix in repairsGI bracket pipe of size 32 mm dia medium grade of 1.2 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces. The bracket pipe shall be welded to the MS stripof size 32mmX 5mm thick at three placesfor purpose of giving strengthening to the bracket pipe and fixing with necessary suitablenuts,bolts & washers and removing of old unserviceable item complete all as specified and directed. |
