|
| 1 | Charpoy MS Square NCOs (FD/MAP II/01)Removing the existing unserviceable plywood from charpoy MS SquareNCO\"s and preparation of old painted steel surfaces and applying one coat of synthetic enamel paint colour black to all external and internal surfaces including refixing/fixing the plywood charpoy MS Square etc complete all as specified and as directed.Note : New plywood incorporated will be measured and paid seperatelyunder relevant item of this schedule. |
| 2 | Charpoy MS Square NCOs (FD/MAP II/01)Removing of existing unserviceable Rectangular MS Tube short rail and supply and fixing of 25mmx65mm of 16 GaugeMS Rectangular Tube as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primerall as specified as per drawing and directed by Engr-in-Charge. |
| 3 | Charpoy MS Square NCOs (FD/MAP II/01)Removing of existing unserviceable Rectangular MS Tube long rail and supply and fixing of 25mmx65mm of 16 GaugeMS Rectangular Tube as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primerall as specified as per drawing and directed by Engr-in-Charge. |
| 4 | Charpoy MS Square NCOs (FD/MAP II/01)Removing of existing unserviceable MS Square leg of 32mmx32mm and supply and fixing of 32mmx32mmx440mm of 16 GaugeMS Square leg as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primerall as specified as per drawing and directed by Engr-in-Charge. |
| 5 | Charpoy MS Square NCOs (FD/MAP II/01)Removing of existing unserviceable MS Square Stiffener of 25mmx25mm and supply and fixing of 25mmx25mmx900mm of 16 GaugeMS Square stiffeners as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primerall as specified as per drawing and directed by Engr-in-Charge. |
| 6 | Charpoy MS Square JCOs (FD-CECZ/TD/726)Removing the existing plywood from charpoy MS SquareJCO\"s and preparation of old painted steel surfaces and applying one coat of synthetic enamel paint colour black to all external and internal surfaces including refixing/fixing the new plywood to the charpoy MS square etc complete all as specified and as directed.Note : New plywood incorporated will be measured and paid seperatelyunder relevant item of this schedule. |
| 7 | Charpoy MS Square JCOs (FD-CECZ/TD/726)Removing of existing unserviceable Rectangular MS Tube short rail and supply and fixing of 25mmx65mm of 16 GaugeMS Rectangular Tube as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primerall as specified as per drawing and directed by Engr-in-Charge. |
| 8 | Charpoy MS Square JCOs (FD-CECZ/TD/726)Removing of existing unserviceable Rectangular MS Tube long rail and supply and fixing of 25mmx65mm of 16 GaugeMS Rectangular Tube as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primerall as specified as per drawing and directed by Engr-in-Charge. |
| 9 | Charpoy MS Square JCOs (FD-CECZ/TD/726)Removing of existing unserviceable MS Square Head Rest of 32mmx32mm and supply and fixing of 32mmx32mm of 16 GaugeMS Square leg as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primerall as specified as per drawing and directed by Engr-in-Charge. |
| 10 | Charpoy MS Square JCOs(FD-CECZ/TD/726)Removing of existing unserviceable MS Square leg of 32mmx32mm and supply and fixing of 32mmx32mmx440mm of 16 GaugeMS Square leg as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primerall as specified as per drawing and directed by Engr-in-Charge. |
| 11 | Charpoy MS Square JCOs (FD-CECZ/TD/726)Removing of existing unserviceable MS Square stiffeners of 25mmx25mm and supply and fixing of 25mmx25mmx900mm of 16 GaugeMS Square stiffeners as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primerall as specified as per drawing and directed by Engr-in-Charge. |
| 12 | Bed hard top MS square for Offrs (FD/E6/MAP/08 ®)Removing the existing plywood from charpoy MS square Offrs and preperation of old painted steel surfaces and applying one coat of syntheticenamel paint colour black to all external and internal surfaces including refixing/fixing the plywood on charpoy MS Square etc complete all as specified and directed .Note : New plywood incorporated will be measured and paid seperately as supply only under relevant item of this schedule. |
| 13 | Charpoy MS Square for Offrs (FD/E6/MAP/08 ®)Removing of existing unserviceable Rectangular MS Tube short rail and supply and fixing of 25mmx65mmx900mm of 18 GaugeMS Rectangular Tube as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primerall as specified as per drawing and directed by Engr-in-Charge. |
| 14 | Charpoy MS Square for offrs (FD/E6/MAP/08 ®)Removing of existing unserviceable Rectangular MS Tube long rail and supply and fixing of 25mmx65mmx2050mm of 18 GaugeMS Rectangular Tube as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primerall as specified as per drawing and directed by Engr-in-Charge. |
| 15 | Charpoy MS Square Offrs (FD/E6/MAP/08 ®)Removing of existing unserviceable MS Square Head Rest of 38mmx38mm and supply and fixing of 38mmx38mm of width 900mm and height 800mm of 18 GaugeMS Square leg as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primerall as specified as per drawing and directed by Engr-in-Charge. |
| 16 | Charpoy MS Square Offrs (FD/E6/MAP/08 ®)Removing of existing unserviceable MS Square Foot Rest of 38mmx38mm and supply and fixing of 38mmx38mm of width 900mm and height 800mm of 18 GaugeMS Square leg as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primerall as specified as per drawing and directed by Engr-in-Charge. |
| 17 | (Applicable to Ser No 1, 06 and 12 ) Supply only new plywood BWR Grade ISImarked of size 1980 mm x 900 mm x 12 mm and fix with headless MS nut & bolt 6 mm dia 75 mm length with washer all as specified/directed and as shown on drg.Note : The size of plywood all as specified/directed and as shown on drgis suitable to the items Nos 09, 10 & 11 for fixing only all as specified/directed and as shown on drg. |
| 18 | Charpoy GI Pipe with Plywood top (FD-220)Removing the existing unserviceable plywood from Charpoy GI pipe Plywood top , fixing of new plywood BWR Grade ISI marked of size 1980mm x 900mm x 12mm rounded edges on four corner and fixed with headless MS nut & bolt 6 mm dia 75 mm length with washer and directed by the Engr-in- charge Note : New plywood incorporated will be measured and paid seperately as supply only under relevant item of this schedule. |
| 19 | Supply only new plywood BWR Grade ISImarked of size 1980 mm x 900 mm x 12 mmall as specified/directed and as shown on drg. |
| 20 | Chair Verandah (FD/E6/MAP-II/06)Removing the existing unserviceable seat and back from chair verandah of size 455mm x 455mm and fixing of best quality PVC Seat and Back 4mm thick with weight not less than 1.85Kg and Grooves 90x10mm, 10Nos on the seat and back as shown in drawing. |
| 21 | Material and labour for preparing old steel surfaces of frame of chair verandah with one coat of synthetic enamel paint white colour, as shown on drawing and all as specified/directed. |
| 22 | Supply and fix new hard rubber toes of appropriate size, suitable to chair verandahas shown on drawing and all as specified/directed. |
| 23 | Chair writing steel (Applicable to item Nos 23 to 27) (FD/E6/MAP/12)Removing the existing unserviceable damaged fabric from seat and back and supply and fix new fabric to seat and back and shall contain materials in various colours - acylic , polyester, polypropylene of approx size 950mmx500mm (for seat and back both) upholstered with pvc lipping all round. |
| 24 | Removing the existing unserviceable damaged foam including plywood and supply and fix new polyurethane foam of approx size 950mmx500mm (for seat and back both) shall be 50mm thick and shall be moulded with density 50-55 kgs per cum and hardness 20 +/- 2 kgs/m2 on hampden machine. |
| 25 | Removing the existing unserviceable damaged armrest and supply and fix new armrest made of black integral skin polyurethane with 75-85 hardness and reinforced with MS insert it shall be scratch and wheather resistant both hand rest sections to have slope towards front. |
| 26 | Material and labour for preparing the surfaces of old steel frame of the chair with one coat of synthetic enamel paintblack shade (spray painting for better finish)for chair writing steel all as directed/specified and as shown on drg. |
| 27 | Removing the existing unserviceable damaged contoured lumber support and supply and fix new contoured lumber support for extra comfort. |
| 28 | Chair computer/Chair revolving (Applicable to item Nos 28 to 33) (FD/E6/MAP/01)Removing the existing un serviceable/damaged fabric of seatand supply and fix the new fabirc ofseat 510mm x 470mm x 60mm with PVC lipping alround.(Note : Size of seat can vary to +- 100mm) |
| 29 | Chair computer/Chair revolving (FD/E6/MAP/01)Removing the existing un serviceable/damagedfabric of back and supply and fix the new fabric of back of seat 620mm x 470mm x 60mmPVC lipping. (Note : Size of back can vary to +- 100mm) |
| 30 | Chair computer/Chair revolving (FD/E6/MAP/01)Removing the existing un serviceable/damagedseatand supply and fix the new seat of seat 510mm x 470mm x 60mm (12 mm hot pressed ply wood, upholstered with fabric and moulded polyurethane foam. |
| 31 | Removing the existing un serviceable/damagedback and supply and fix the new back of seat 620mm x 470mm x 60mm (12 mm hot pressed ply wood, upholstered with fabric and moulded polyurethane foam with PVC lipping. (Note : Size of seat and back can vary to +- 100mm) |
| 32 | Removing the existing broken Pedestal assy (injection moulded in black 30% Glass filled nylone A 10.5 MM dia forged bright Zinc plated MS castor pin is of press fitted into each prong for holding the cators.It is 600 mm pitch-centre Dia) from revolving chairs & computer chairs ,supply and fix new Fibre Stem Base |
| 33 | Removing the existing broken bottom gas lift (Up & Down) hydraulic with pouch (Maintenance free environmental friendly, chrome free cylinder tube shll be fixed ina MS black powder coated outer central column tube 38 mm dia and 2mm thick.It shall have 100 mm stroke length and gas pressure of 300 newton force, should under go an impact test)from revolving chairs, computer chairs supply and fix new bottom gas lift (hydraulic) with pouch of Make : Godrej or equivelent Note : Adjustable Tilting Mechanism to be designed with the following mechanism.Forward tilt, self regulating tilt tension + manual override, 4 position tilt lock. Anti-shock back mechanism to prevent back rest from hitting the user when the lock released. 360 swivel mechanism to allow fluid lateral movement) |
| 34 | Chair revolving with Arm high back (Applicable to item Nos 34 to 37) (TP)Removing the existing un serviceable seat (cushioned) and supply and fix the new seat of seat 510mm x 470mm x 60mm (12 mm hot pressed ply wood, upholstered with leatherette and moulded polyurethane foam for chair revolving padded with arm high back all as shown on drg and as directed. |
| 35 | Removing the existing un serviceable back (cushioned) and supply and fix the new back of seat 510mm x 470mm x 60mm (12 mm hot pressed ply wood, upholstered with leatherette and moulded polyurethane foam for chair revolving padded with arm high back all as shown on drg and as directed.(Note : Size of seat and back can vary to +- 100mm) |
| 36 | Removing the existing broken bottom gas lift (Up & Down) hydraulic with pouch (Maintenance free environmental friendly, chrome free cylinder tube shll be fixed ina MS black powder coated outer central column tube 38 mm dia and 2mm thick.It shall have 100 mm stroke length and gas pressure of 300 newton force, should under go an impact test)from revolving chairs, computer chairs supply and fix new bottom gas lift (hydraulic) with pouch of Make : Godrej or equivelent Note : Adjustable Tilting Mechanism to be designed with the following mechanism.Forward tilt, self regulating tilt tension + manual override, 4 position tilt lock. Anti-shock back mechanism to prevent back rest from hitting the user when the lock released. 360 swivel mechanism to allow fluid lateral movement) |
| 37 | Removing the existing broken padded Arm rest (Black integral skin polyurethane finforced with leatherette and MS insert.It shall be scratch and weather reisistant) as per samplefrom revolving chairs & computer chairs ,supply and fix new arm rest . |
| 38 | Almirah large steel (Applicable to items Nos 38 to 39) (FD-1031)Supply and Welding of support to the shelf ofalmirah large steelmade of 1mm thick CRC Sheet of 100mm wide and 920mm long bend to the shape duly painting of affected area with two coats of enamel paint over one coat of red oxide primer as directed by the Engr in Charge.Note : Welding of support to each shelf will be measured as single unit. |
| 39 | Removing the existing unserviceable three way locking device and supply and fixthree way locking device with cover for almirah large steel completeasshown on drgs and all as directed by the Engr in Charge |
| 40 | Almirah small steel (Applicable to items Nos 40 to 41) (FD-1032)Supply and Welding of support to the shelf ofalmirah Small steelmade 1mm thick CRC Sheet of 100mm wide and 765mm long bend to shape duly painting of affected area with two coats of enamel paint over one coat of red oxide primer as directed by the Engr in Charge. Note : Welding of support to each shelf will be measured as single unit. |
| 41 | Removing the existing unserviceable three way locking device and supply and fixthree way locking device with cover for almirah medium steel completeasshown on drgs and all as directed by the Engr in Charge |
| 42 | Almirah large steel / Small steel (Applicable to items Nos 42 to 50) (FD-1031 FD-1032 FD-67)Removing the existing unserviceable lock and supply and fix new sutable lock of appropriate size,with duplicate keys chromium plated or equivalent as suitable in almirah large/ medium steel as shown on drgs and all as directed.Notes :(i)Unit rate quoted shall include for provision/repairs to back plate, cover to key hole, back side cover, locking device etc. (ii) Removing the existing steel chromium plated handle and supply and fix new handles shall be measured and paid separately. |
| 43 | Removing the existing unserviceable handle and supply and fix new chromium plated M S handle 125mm long to almirah large/medium steel as shown on drg and all as specified and as directed. |
| 44 | Material and Labour for spot welding the shelves to almirah sides as directed and shown on drgs for almirah large/medium steel.Note:-Welding each shelfcompletely will be measured as a single unit. |
| 45 | Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on all external and internal surfaces of almirah large steel of Size 920 x 485 x 1985mm complete all as specified and as directed. |
| 46 | Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on all external and internal surfaces of almirah medium steel of Size 760mm x 440mm x 1270 mm complete all as specified and as directed. |
| 47 | Removing the existing unserviceable/ damaged shelves for almirah large steel and supply and fix MS sheet CRC 1mm thick bent to shape and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirahall as specified and as shown on drg. |
| 48 | Removingthe existing unserviceable/ damaged shelves for almirah medium steel and supply and fix MS sheet CRC1mm thick bent to shape and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirahall as specified and as shown on drg. |
| 49 | Removing the existing unserviceable/ damaged/ broken legs for almirah large and supply and fix new legs and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah all as specified and as shown on drg. |
| 50 | Removingthe existing unserviceable/ damaged/ broken legs for almirah medium and supply and fix new legs and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah all as specified and as shown on drg. |
| 51 | Locker steel (Applicable to items Nos 51 to 56) (FD-1029)Material and Labour for cleaning/preparing the existing surfaces of locker steel including inner and outer surfaces and applying one coat of synthetic enamel paint by spray process to achieve a uniform finish all as directed and as shown on drg. |
| 52 | Removingthe existing unserviceable/damaged/broken legs for lockers steel and supply & fix new legs and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the lockerand providing rubber pad 3mm thick for legs all as specified and as shown on drgs. |
| 53 | Supply and Welding of support to the shelves ofLocker Steelmade 1mm thick CRC Sheet of 100mm wide and 350mm long bend to shape as directed by the Engr in Charge |
| 54 | Removing the existing unserviceable/damaged hanging rod andsupply and fix new hanging rod 20 mm dia steel chromium plated conduit pipe and two sockets shall be provided at the end of hanging rod. |
| 55 | Removing the existing unserviceable/damaged handle andsupply and fix new chromium plated handle 100 mm long to locker steel fixed to shutters all as specified/directed and as shown on drg |
| 56 | Removing the existing unserviceable/damaged Hasp and staple andsupply and fix new cromium plated hasp & staple 75 mm longto locker steel all as specified/directed and as shown on drg. |
| 57 | Almirah large steel 1/2 Hanging X 1/2 Shelving (Applicable to items Nos 57 to 61) (FD-1033)Removing the existing unserviceable three way locking device and supply & fixthree way locking device with cover for almirah large steel all as specified/directed and as shown on drg. |
| 58 | Removing the existing unserviceable lock and supply & fix new steel lockwith duplicate keys (Both locks Inner drawer and door) chromium plated as suitable to almirah all as specified/directed and as shown on drg. Notes : (i)Unit rate quoted shall include for provision/repairs to back plate, cover to key hole, back side cover, locking device etc. (ii) Steel chromium plated handle shall be measured and paid separately. |
| 59 | Removing the existing unserviceable handle and supply & fix new chromium plated steel handle 125mm long to almirah large/medium steel all as specified/directed and as shown on drg. |
| 60 | Removingthe existing unserviceable clamps for shelves and spot welding the shelves to almirah sides all as specified/directed and as shown on drg.Note :- Welding each shelfcompletely will be measured as a single unit. |
| 61 | Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint to all external and internal surfaces of almirah large steel (Size 920 x 485 x 1985mm) and to fix 3mm hard rubber pad in the bottom of legs all as specified/directed and as shown on drg. |
| 62 | Table office clerk steel (Applicable to items Nos 62 to 66)(FD-1004)Material and Labour for cleaning / preparing the existing surfaces of table office clerks steel including inner surfaces of steel drawers and applying one coat of synthetic enamel paint by spray process to achieve a uniform finish and to fixhard rubber shoe for legs all as directed. |
| 63 | Removing the existing unserviceable/damaged leg and replacing with new leg of 25mm x 25mm square MS tube 1.6mm thick and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the table office clerk and all as specified and shown on drgs. |
| 64 | Removing the existing unserviceable/damaged frame and replacing with new frame of 25mm x 25mm square MS tube 1.6mm thick and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the table office clerk and all as specified and shown on drgs. |
| 65 | Removing the existing unserviceable drawers of table office clerk steel and supply and fix new drawer made of MS sheet CRC 1 mm thick bent to shape to its original position and applying one coat of synthetic enamel paint over a coat of red oxide primer all as specified and as shown on drgs. |
| 66 | Removingthe existing unserviceable top and supply and fix 18 mm thickMDF Board commercial exterior grade all as specified/directed and as shown on drg. |
