|
| 1 | Bed plywood top with MNF set (Applicable to item No 01 to 06) (FD-246)Removingthe existing unserviceable broken wooden long rail and supply of first class hard wood (Teak wood) new long rail of size 35mmx90mmx1980 mm including 35 mm x 5mm flat iron of mild steel bent to right angles as shown on drg and as directed. |
| 2 | Removingthe existing unserviceable broken wooden head board including legs and supply and fix 900x660mmnew headboard including teak wood legs of size 60mmx60mm and all as specified and as shown on drg. |
| 3 | Removingthe existing unserviceable /broken foot board including legs and supply and fix 900x500mmnew footboard including teak wood legs of size 60mmx60mm and all as specified/directed and as shown on drg. |
| 4 | Removingthe existing unserviceable /broken wooden stiffeners (supporting pieces) and supply and fix first class hard wooden stiffeners of size 40cmx60cm complete all as specified/directed and as shown on drg. |
| 5 | Removingthe existing unserviceable plywood and supply and fix 900mmx1800mm x 12mm thick plywood commercial BWR grade bearing ISI marked all as specified/directed and as shown on drg. |
| 6 | Supply and fix 100mmx100mmx25mm thick teakwood corner bracket and screwed to the leg of bed plywood top all as specified/directed. |
| 7 | Sofa sets (Applicable to item Nos 07 to 15 ) (FD-281)Removing the existing unserviceable tapestry cloth, cushion and replacing with new tapestry cloth as per sample with foam cushion of size 560mmx530mm, 40 density, 100mm thick, including inner cloth all as shown on drgs and as directed.Note :- Each cushion for seat or back will be measured as single unit. |
| 8 | Removing the existing unserviceable leg from Sofa and supply and fix new teak wood leg of size 35mmx75mmx510mm all as shown on drg and as directed. |
| 9 | Removing the existing unserviceable arm restfrom sofa and supply and fix new teak wooden arm rest size 70mmx35mmx725mm all as shown on drawing and as directed . |
| 10 | Removing the existing unserviceable side railfrom sofa and supply and fix new teak wood side rail of size 35mmx100mmx690mm all as shown on drawing and as directed . |
| 11 | Removing the existing unserviceable bearerfrom sofa long pieces and supply and fix new teak wood bearer of size 1590mmx50mmx22mm all as shown on drawing and as directed . |
| 12 | Removing the existing unserviceable bearerfrom sofa short piecesand supply and fix new teak wood bearer of size 440mmx50mmx22mm all as shown on drawing and as directed . |
| 13 | Removing the existing unserviceable battensfrom sofa and supply and fix new teak wood battens of size 570mmx50mmx22mm all as shown on drawing and as directed . |
| 14 | Removing the existing unserviceable front railfrom sofa long piecesand supply and fix new teak wood front railall as shown on drawing and as directed . |
| 15 | Removing the existing unserviceable front rail from sofa short piecesand supply and fix new teak wood front railof size 22mmx102mmx1740mm all as shown on drawing and as directed . |
| 16 | Side board (Applicable to item Nos 16 to 25) (FD-241)Removing the existing unserviceable top and supply and fix new top made out of 18mm thick prelaminatedMDF Baord, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination not less than 1.5mm thick of sizes 1220mmx455mm etc complete all as specified/directed and as shown on drg. |
| 17 | Removing the existing unserviceable side andsupply and fix new side made out of 18mm thick prelaminated MDF Baord, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination not less than 1.5mm thick of sizes 760mmx455mm etc complete all as specified/directed and as shown on drg.Note:-Each side shall be measured as single units. |
| 18 | Removing the existing unserviceable back of side board and supply and fix new back with 6mm thick plywood, grade BWR, type BB, ISI marked of sizes 1220mmx700mm all as specified/directed and as shown on drg. |
| 19 | Removing the existing unserviceable bottom of drawer and supply and fix new 12mm thick plywood, grade BWR, type BB, ISI marked of size 380mmx450mm all as specified/directed and as shown on drg. |
| 20 | Removing the existing unserviceable drawer and supply and fix new drawer of size 380mmx450mmx155mm, made out of plywood 12 mm thick for sides and back and 18mm thick prelaminated MDF Baord exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for front and 6mm thick plywood for bottomas specified/directed and as shown on drg.Note:-Each drawer will be measured as single unit. |
| 21 | Removing the existing unserviceable shutter and supply and fix new shutter of size 600mmx390mm made out of 18mm thick prelaminatedMDF Baord exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including hinges,and lock all as specified/directed and as shown on drg.Note:- Each shutter will be measuredas single unit. |
| 22 | Removing the existing unserviceable bottom ofside board and supply and fix new bottom of sizes 455mmx1228mm, made out of18mm thick plywood, grade BWR, type BB all as specified/directed and as shown on drg. |
| 23 | Removing the existing unserviceable leg frame and supply and fix new teak woodleg frame with legs, sizes 1140mmx 380mm, etc complete all as specified/directed and as shown on drg. |
| 24 | Removing the existing unserviceable broken wooden legs and supply and fix new teak wood leg, size 45mmx45mmx125mm etc complete all as specified/directed and as shown on drg.Note:- Each leg will be measuredas single unit. |
| 25 | Supply and fixing of knob and shall be aluminum anoidised (Dark Brown or Brass Cromium Plated ) |
| 26 | Table dining 6 persons1500mm x 900mm (Applicable to item Nos 26 to 30 ) (FD-273 FD-239, FD/MAP-II/03)Removing the existing unserviceable damaged top and supply and fix with a new prelaminated MDF board 18mm thick BW typewith 1.5mm thick decorative withwith 4mm thick teak wood edging all round of size 1500mmx900mm all as specified/directed and as shown on drg. |
| 27 | Removing the existing unserviceable damaged long rails & supply and fix new teakwood long rail of size 25mmx100mmx1500mmall as specified/directed and as shown on drg |
| 28 | Removing the existing unserviceable damaged leg andsupply and fix new teakwood legof size 75mmx40mmx760mm all as specified/directed and as shown on drg . |
| 29 | Removing the existing unserviceable damaged side rails and supply and fix new teakwood side rails of size 25mmx100mmx900mm all as specified/directed and as shown on drg. |
| 30 | Removing the existing unserviceable4 corner wooden bracket size 25mmx100mmx100mm and supply and fix 4 corner wooden bracket size 25mmx100mmx100mm all as specified/directed and as shown on drg |
| 31 | Book case (FD-237)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/abbrassive cloth throughly smooth and clean off and applying one coat of french polishingto required finish complete all as specified and as directed. |
| 32 | Side Board (FD-241)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polishto required finish complete all as specified and as directed. |
| 33 | Table 900x600 with Drawer (FD-41 FD-283 FD-224 FD-55)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polishto required finish complete all as specified and as directed. |
| 34 | Table bed side (FD-28 FD-276 FD-243)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polishto required finish complete all as specified and as directed. |
| 35 | Table Dressing Gents (FD-31 FD-230)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polishto required finish complete all as specified and as directed. |
| 36 | Table Dressing Ladies (FD-32 FD-251)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 37 | Bed plywood top (FD-246)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 38 | Binsoiled linen large ( FD-70)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 39 | Chair dining (FD-16 FD-279)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polishcomplete all as specified and as directed. |
| 40 | Chair dining Map : (FD/MAP II/04)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polishcomplete all as specified and as directed. |
| 41 | Chair Easy (FD-17 FD-229)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 42 | Chair writing (FD-20 FD-280)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finishcomplete all as specified and as directed. |
| 43 | Hat stand with mirror ( FD-233)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 44 | Peg table (FD-384 FD-25 FD-236)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 45 | Sofa Set 4 Seater (FD-258)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying ono coat of french polish to required finish complete all as specified and as directed. |
| 46 | Sofa Set 5 Seater (FD-281)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finishcomplete all as specified and as directed. |
| 47 | Stool Dressing (FD-27)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finishcomplete all as specified and as directed. |
| 48 | Table 900x600 W/o Drawer (FD-284 FD-42)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finishcomplete all as specified and as directed. |
| 49 | Table Centre (FD-29 FD-274 FD-235)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 50 | Table dining 6 persons ( FD-273 FD-239)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finishcomplete all as specified and as directed. |
| 51 | Table dining 8 persons ( FD-273 FD-239)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finishcomplete all as specified and as directed. |
| 52 | Table office officer wooden (DB-4199)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polishcomplete all as specified and as directed. |
| 53 | Table writing( FD-249 FD-33 FD-275)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 54 | Teapoy (FD-34 FD-278 FD-232 FD-382)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finishcomplete all as specified and as directed. |
| 55 | Chair tubular steel with / without arms (Applicable to itemsNos 55 to 61) (FD-75)Material and labour for preparing the surfaces of old steel tubular frame of the chair with one coat of synthetic enamel paint smoke grey shade for chair tubular steel with arms all as directed/specified and as sshown on drg. |
| 56 | Material and labour for preparing the surfaces of old steel tubular frame of the chair with one coat of synthetic enamel paint smoke grey shade for chair tubular steel without arms all as directed/specified and as shown on drg. |
| 57 | Removing the existing unserviceable/damaged seats from chair tubular steel with/without arms andsupply and fix new seats of size 480mmx450x25mmx4 made out of teak wood frame with half round beading at edges and recanningwith new best quality of plastic cane size 2.0mm x 0.46 mm for weaving and 3mm x 0.60 mm for beading as per Godrej pattern as specified/directed all as directed/specified and as shown on drg. |
| 58 | Removing the existing unserviceable/damaged back from chair tublular steel with/without arms andsupply and fix new back of size 480mmx45mmx25mmx4 made out of teak wood frame all as directed/specified and and recanningwith new best quality of plastic cane size 2.0mm x 0.46 mm for weaving and 3mm x 0.60 mm for beading as per Godrej pattern as specified/directedas shown on drg. |
| 59 | Removing the existing unserviceable/broken arm rest andsupply and fix new arm rest of size 380mmx50mmx25mmx2 with 1st class hard wood made to shape and painted with two coats of black synthetic enamel paint for chair tubular steel with arms all as directed/specified and as shown on drg. |
| 60 | Removing the existing unserviceable rubber shoes from bottom of chair andsupply and fix new hard rubber shoes to the bottom of chair all as directed/specified and as shown on drg. |
| 61 | Removing the existing unserviceable PVC/rubber plug from top of chairs andsupply and fix new PVC / rubber plug to the top of chair all as directed/specified and as shown on drg. |
| 62 | Table bed side (Applicable to item Nos 62 to 66) (FD/E6/MAP/15 (R)Removing of UNSV top from table bed side and supply and fixing new top made out of 18mm thick prelaminated particle board with PVC edging fixed to frame all as shown on drawing and all as directed by Engineer-in-charge |
| 63 | Removing of UNSV side from table bed side and supply and fixing new side made out of 18mm thick prelaminated particle board fixed to frame with suitable size of screws all as shown on drawing and all as directed by Engineer-in-charge |
| 64 | Removing of UNSV back ply from table bed side and supply and fixing new back made out of 18mm thick plywood fixed to frame with suitable size of screws all as shown on drawing and all as directed by Engineer-in-charge |
| 65 | Removing of UNSV drawers from table bed side and supply and fixing new drawer made out of 18mm thick prelaminated particle board all as shown on drawing and all as directed by Engineer-in-charge |
| 66 | Removing of UNSV handle from table bed side and supply and fixing new handle of size 100mm long MS all as shown on drawing and all as directed by Engineer-in-charge |
| 67 | Teapoy (Applicable to item Nos 67 to 70) (FD-34 FD-278 FD-232 FD-382)Removing the existing unserviceable top and supply and fix new top of size 600mmx450mm made out of 18mm thick pre-laminated MDF Baord exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with 4mm thick teak wood edging al-round the top of teapoy all as specified and as shown on drg. |
| 68 | Removing the existing unserviceable leg and supply and fix new teak wood leg of size 515mmx45mmx45mm all as specified and as shown on drg. |
| 69 | Removing the existing unserviceable long rail and supply and fix new teak wood of size 450mmx50mmx20mm and 4 corner wooden bracket size 20mmx40mmx40mmall as specified and as shown on drgs. |
| 70 | Removing the existing unserviceable side rail and supply and fix new teak wood side rail of size 390mmx50mmx20mm all as specified and as shown on drgs. |
| 71 | Chair Dining ( FD-16 FD-279)Removing the existing unserviceable cane from chair dining of size 440mm x 430mm and recanningwith new best quality of plastic cane size 1.80mm x 0.46 mm for weaving and 3mm x 0.60 mm for beading as per Godrej pattern all as specified and as directed. |
| 72 | Chair writing ( FD-20 FD-280)Removing the existing unserviceable cane from Chair writingof size 535mm x 470mm and recanningwith new best quality of plastic cane size 1.80mm x 0.46 mm for weaving and 3mm x 0.60 mm for beading as per Godrej pattern as specified/directed. |
| 73 | Chair easy ( FD-17 FD-229)Removing the existing unserviceable cane from Chair easy seat/back rest of size 575mm x 510mm & 420mm x 330mm and recanningwith new best quality of plastic cane size 1.80mm x 0.46 mm for weaving and 3mm x 0.60 mm for beading as per Godrej pattern as specified/directed. |
| 74 | Stool Dressing CB ( FD-27 FD-282 FD-374)Removing the existing unserviceable cane from stool dressing CB of size 420mm x 275mm and recanningwith new best quality of plastic cane size 1.80mm x 0.46 mm for weaving and 3mm x 0.60 mm for beading as per Godrej pattern as specified/directed. |
| 75 | Chair dining JCO/OR (Applicable to item Nos 75 to 82) (FD/MAP II/05)Removing unserviceable PVC seat of chair dining JCO/ORand supply and fix new PVC seat ofsize 430mm(L)x440mm(front)/405mm(back) (W) made out of 04/05 mm thickcomplete all as shown on drg and as specified/directed |
| 76 | Removing unserviceable front leg of chair dining JCO/ORand supply and fix new teak wood leg of size 460mmx55mm x 30mm complete as shown on drg and as specified/directed. |
| 77 | Removing unserviceable back leg of chair dining JCO/ORand supply and fix new teak wood back leg of size 890mm x 55mm x 30mm duly curved, complete all as shown on drg and as specified/directed. |
| 78 | Removing unserviceable side rail of chair dining JCO/ORand supply and fix new teak wood side rail of size430mmx65mm x 30mm complete all as shown on drg and as specified/directed. |
| 79 | Removing the unserviceable front rail of chair dining JCO/ORand supply and fix new teak wood front rail of size 420mmx65mm x 30mm complete as shown on drg and as specified/directed. |
| 80 | Removing unserviceable back rail of chair dining JCO/OR and supply and fix new teak woodback rail of size 405mm x 65mmx30mm complete all as shown on drg and as specified/directed. |
| 81 | Removing unserviceable side Stiffner of chair dining JCO/ORand supply and fix new teak woodside Stiffner of size 430mmx25mmx20mm complete all as shown on drg and as specified/directed. |
| 82 | Removing unserviceable middle Stiffner of chair dining JCO/ORand supply and fix new teak wood middle Stiffner of size 440mmx25mmx20mm as shown on drg and as specified/directed. |
| 83 | Table 900X600 w/o drawer (Applicable to item Nos 83 to 86) (FD-42 FD-284)Removing the existing unserviceable table top and supply and fix new top of size 900mmx600mm of prelaminated particle board 18mm of size interior grade with 4mm thick teak wood edging all round all as specified and as shown on drgs. |
| 84 | Removing the existing unserviceable/damaged front and back rails and supply and fix new teak wood front and back rails of size 25mmx130mmx740mm all as specified and as shown on drg. |
| 85 | Removing the existing unserviceable damaged leg and supply and fix new teak wood leg of size 60mm to 40mm(bottom) with a height of 735mm all as specified and as shown on drg. |
| 86 | Removing the existing unserviceable damaged side rails and supply and fix new teak wood side rails of size 25mmx130mmx440mm all as specified and as shown on drg. |
| 87 | Table dressing with mirror ladies (Applicable to item Nos 87 to 94) ( FD-32 FD-251)Removing the existing unserviceable drawers and supply and fix new drawers of size 300mmx380mm & 315mmx115mm made out of 18mm thick pre-laminated MDF board BW Type with 1.5mm thick decorative with PVC lipping alround, prelaminated one side with decorative choice lamination & other side balancing white lamination for front and 6 mm thick plywood, grade BWR, type BB with no. of ply 5 for bottom of drawers, including fittings such as knobs etc all asspecified and as shown on drg.Note:-Each drawer shall be measured as single unit. |
| 88 | Removing the existing broken glass shutters and supply and fix new glass shutters of size 300mmx390mm all as specified and as shown on drgs.Note:- Each glass shutter will be measured as single unit. |
| 89 | Removing the existing unserviceable aluminium channel and supply and fix newaluminium channel of width 10mm thick suitable for the drawer of size 530mm long all as shown on drgs. |
| 90 | Removing the existing unserviceable plywood portion from back of mirror and supply and fix new back with frame of size 395mmx1230mm made out of 6 mm thick plywood, grade BWR, type BB with no of ply 5 all as specified and as shown on drgs. |
| 91 | Removing the existing unserviceable mirror and supply and fix new mirror of size 366mmx1220mm, 5 mm thick completeall as specified and shown on shown on drgs. |
| 92 | Removing the existing unserviceable 12mm ply wood from back and supply and fix new back of size 395mmx900mm of table dressing ladies made out of 12 mm thick plywood commercial quality all as specified and as shown on drgs. |
| 93 | Removing the existing unserviceable frame with legs and supply and fix new teak wood frame with 4 legs of size235mmx40mmx25mm & 650mmx40mmx25mm all as specified and shown on drgs. |
| 94 | Removing the existing unserviceable leg and supply and fix new leg made out of teak wood of 04 Nos legs of size 155x45x45mm all as specified and as shown on drgs.Note:- Each leg shall be measured as single unit. |
| 95 | Table peg (Applicable to item Nos 95 to 98) ( FD-384 FD-25 FD-236)Removing the existing unserviceable top and supply and fix new top of size 450x300 mm made out of 18mm thick pre-laminated MDF board BW Type with 1.5mm thick decorative withwith 4mm thick teak wood edging all round to the top of Pegtable all as specified and as shown on drg. |
| 96 | Removing the existing unserviceable bottom rail and supply and fix new teak wood bottom rail of size 20mmx40mmx300mm all as specified and as shown on drg. |
| 97 | Removing the existing unserviceable long rail and supply and fix new teak wood long rail of size20mmx 40mmx450mm and 4 corner wooden bracket size 20mmx40mmx40mm all as specified and as shown on drg. |
| 98 | Removing the existing unserviceable leg and supply and fix new teak wood leg of size 30x50x380 mm all as specified and as shown on drg. |
| 99 | Table centre (Applicable to item Nos 99 to 103) ( FD-29 FD-274 FD-235)Removing the existing unserviceable top and supply and fix new top of size 900mm x 450mm made out of 18mm thick pre-laminated MDF board BW Type with 1.5mm thick decorative withwith 4mm thick teak wood edging all round of table top all as specified and as shown on drg. |
| 100 | Removing the existing unserviceable leg and supply and fix new teak wood leg of size 30mmx60mmx400mm all as specified and as shown on drg. |
| 101 | Removing the existing unserviceablelong rail of size 30mmx60mmx900mm and supply and fix new teak wood long rail andall as specified and as shown on drg. |
| 102 | Removing the existing unserviceable short rail of size 30mmx60mmx450mm and supply and fix new teak wood short rail all as specified and as shown on drg. |
| 103 | Supply and fixing of 4 corner wooden bracket size 20mmx40mmx40mm. (Set of 04) |
| 104 | Chair Dining FD(Applicable to item Nos 104 to 111) (FD-16 FD-179)Removing the existing unserviceable rear legand supply and fix new teak wood rear leg of size 890mmx65mmx65mm complete all as shown on drg and as specified/directed. |
| 105 | Removing the existing unserviceable front leg and supply and fix new teak wood front leg of size 455mmx45mmx45mm complete as shown on drg and as specified/directed. |
| 106 | Removing the existing unserviceable back restand supply and fix new teak wood back rest of size 380mmx50mmx19mm complete as shown on drg and as specified/directed. |
| 107 | Removing the existing unserviceable front rail and supply and fix new teak wood front rail of size 400mmx65mmx30mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 108 | Removing the existing unserviceable rear rail and supply and fix new teak wood rear rail of size 400mmx65mmx30mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 109 | Removing the existing unserviceable side rails and supply and fix new teak wood side rails of size 380mmx65mmx30mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 110 | Removing the existing unserviceable side stiffner and supply and fix new teak wood side stiffner of size 430mmx20mmx25mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 111 | Removing the existing unserviceable middle stiffner and supply and fix new teak wood middle stiffner of size 430mmx20mmx25mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 112 | Chair Writing (Applicable to item Nos 112 to 120) (FD-20 FD-280)Removing the existing unserviceable rear leg and supply and fix new teak wood rear leg of size 890mmx65mmx65mm complete as shown on drg and as specified/directed.. |
| 113 | Removing the existing unserviceable front leg and supply and fix new teak wood front leg of size 675mmx45mmx45mm complete as shown on drg and as specified/directed. |
| 114 | Removing the existing unserviceable back rest and supply and fix new teak wood back rest of size 445mmx65mmx12mm complete as shown on drg and as specified/directed. |
| 115 | Removing the existing unserviceable front rail and supply and fix new teak wood front rail of size 490mmx65mmx30mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 116 | Removing the existing unserviceable rear rail and supply and fix new teak wood rear rail of size 440mmx65mmx30mmincluding drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 117 | Removing the existing unserviceable side rails and supply and fix new teak wood side rails 440mmx65mmx30mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 118 | Removing the existing unserviceable/ broken Arm rest and supply and fix new teak wood Arm rest of size 495mmx50mmx19mmcomplete as shown on drg and as specified/directed. |
| 119 | Removing the existing unserviceable side stiffner and supply and fix new teak wood side stiffner of size 470mmx20mmx25mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 120 | Removing the existing unserviceable middle stiffner and supply and fix new teak wood side stiffner of size 535mmx20mmx25mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 121 | Chair easy FD (Applicable to item Nos 121 to 126) (FD-17 FD-229)Removing the existing unserviceable rear leg and supply and fix new teak wood rear leg of size 535mmx40mmx40mm complete as shown on drg and as specified/directed. |
| 122 | Removing the existing unserviceable front leg and supply and fix new teak wood front leg of size 535mmx40mmx40mm complete as shown on drg and as specified/directed. |
| 123 | Removing the existing unserviceable broken Arm rest and supply and fix new teak wood arm rest of size 610mmx55mmx25mm complete as shown on drg and as specified/directed. |
| 124 | Removing the existing unserviceable front frame and supply and fix new teak wood front frame of size 510mmx55mmx25mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 125 | Removing the existing unserviceable front rail and supply and fix new teak wood front rail of size 510mmx55mmx25mm complete as shown on drg and as specified/directed. |
| 126 | Removing the existing unserviceable rear rail and supply and fix new teak wood rear rails of size 500mmx50mmx25mm complete as shown on drg and as specified/directed. |
| 127 | Chair dining Officers (Applicable to item Nos 127 to 134) FD/MAP II/04Removing unserviceable seat of chair dining officers with cushion and supply and fix new seat ofsize 450mmx450mm made out of75 mm thick 40 Density foam covered with tapestry cloth nailed to 12 mm thick Phenol Bonded plywood commercial, complete all as shown on drg and as specified/directed |
| 128 | Removing unserviceable front leg of chair dining officersand supply and fix new teak wood leg of size 420mmx50mm x 35mm complete as shown on drg and as specified/directed. |
| 129 | Removing unserviceable back leg of chair dining officersand supply and fix new teak wood back leg of size 950mm x 50mm x 35mm duly curved, complete all as shown on drg and as specified/directed. |
| 130 | Removing unserviceable side rail of chair dining officersand supply and fix new teak wood side rail of size450mmx65mm x 25mm complete all as shown on drg and as specified/directed. |
| 131 | Removing the unserviceable front rail of chair dining officersand supply and fix new teak wood front rail of size 420mmx65mm x 25mm complete as shown on drg and as specified/directed. |
| 132 | Removing unserviceable back rail of chair dining officers and supply and fix new teak woodback rail of size 420mm x 90mmx25mm complete all as shown on drg and as specified/directed. |
| 133 | Removing unserviceable side Stiffner of chair dining officersand supply and fix new teak woodside Stiffner of size 450mmx25mmx20mm complete all as shown on drg and as specified/directed. |
| 134 | Removing unserviceable middle Stiffner of chair dining officersand supply and fix new teak wood middle Stiffner of size 420mmx25mmx20mm as shown on drg and as specified/directed. |
| 135 | Table writing (Applicable to item Nos 135 to 141) FD-249 FD-33 FD-275Removing the existing unserviceable broken top and supply and fix new top made out of 18mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick teak wood edging, size 1145mmx600mm all as specified/directed and as shown on drg. |
| 136 | Removing the existing unserviceable/ damaged cupboard shutter and supply and fix new shutter made out of 18 mm thickprelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, size 400mmx700mm, including piano hinges and brass lock all as specified/directed and as shown on drg. |
| 137 | Removing the existing unserviceable drawer and supply and fix new drawer size 300mmx600mmx75mm, made out of teak wood plank 12 mm thick for sides and back and 18mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for front and 6mm thick plywood for bottom of drawer (Plywood, grade BWR, type BB with no. of ply 5) including fittings such as knobs etc all as specified/directed and as shown on drg.Note:- Each drawer will be measured as single unit. |
| 138 | Removing the existing unserviceable back and supply and fix new backsize 1145mmx700mm, made out of 6mm thick Plywood grade BWR, type BB, no. of ply 5, with two coats of synthetic enamel paint over a coat of primer all as specified/directed and as shown on drg. |
| 139 | Removing the existing unserviceable side and supply and fix new side size 600mmx700mm, made out of prelaminated particle board, 18mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination all as specified/directed and as shown on drg.Note:- Each side will be measured as single unit. |
| 140 | Removing the existing unserviceable leg and supply and fixnew teak wood leg size 35mmx55mmx717mm, etc complete all as specified/directed and as shown on drg. |
| 141 | Supply and fixing of knob and shall be aluminum anoidised (Dark Brown or Brass Cromium Plated ) |
