Tender For Interior Renovation Of Aimt Civil Work For Renovation

Sharing tender

Tender For Interior Renovation Of Aimt Civil Work For Renovation CENTERING AND SHUTTERING Cantering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform, Lintels, beams, plinth beams, girders, bressumers and cantilevers, Columns, Pillars, Piers, Abutments, Posts and Struts etc. RCC SLAB Providing and laying in position cement concrete in RCC slab for reinforced cement concrete work, using cement content as per approved design mix etc. complete HYSD REINFORCEMENT Providing and fixing in position of M.S./HYSD bar reinforcement of various diameters for R.C.C. footing, foundations, slabs, beams and columns, chajjas, lintels etc. as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. WATER PROOFINGProviding and supplying water proofing in Dr. Fixit or equivalent for foundation, floor, plinth beam oth any other structural elements, with water proofing for the in concrete with water proof compoumd in Dr. Fixit or equivelent with excavation, backfilling, testing etc complete PLASTERProviding and applying 12 or necessary mm thick internal plaster in cement mortar 1:3 with at all heights and locations in one coat for masonry (except stone masonry) and concrete surfaces including racking out joints, hacking of concrete surface, watering, finishing, curing, scaffolding, coating reinforcement, chicken mesh etc. complete. EMULSION PAINTProviding and applying plastic emulsion paint on old and new surfaces of approved quality, colour and shade to surfaces in two coats including scaffolding and preparing the surfaces (excluding the primer coat) (high quality paint as approved by engineer incharge) Make: Royal High Grade or Equivalent etc. complete. DECKING SLABTata Bluescope Smartdek 51 Structural Decking Sheet, Thickness 1.2mm Surface, Zinc Coated, suitable for construction of composite floor slab (Make: TATA or Equivalent) CARBON FIBRE Providingandapplying single layers uni-directionCarbonfibrewrapping (600gsm)overthe existing RCCmember as perdesign/ instructionof Consulting Engineer including primer application, saturant coating using rollerandstampingbrushes. (Measurementonthebasisof actualareaof fibre cut prior to wrapping). JACKETING IN M 25 CONCRETEProvising and fixing jacketing at necessary locations, with M 25 grade, with making surface, treating reinforcement, provision of scoffolding, necessary support, fabriaction of steel work, concreting as per the necessary design and approval by structural engineer etc.complete MISCELLENIOUS WORKSProviding and fixing, HILTI, additional works like joinary, etc. complete DISMANTLING AND CLEANING BROKEN DEBRISDismantling flooring, plastering, partitions, false ceiling etc. and cleaning all necessary debris including transportation to necessary location as local rules . It includes any necessary permission from local authority etc. complete SURFACE PREPARATIONSurface Preparation: Hamering and Carefully removing existing damaged loose and disintegrated concrete of R.C.C. members at all heights, levels and surfaces at any thickness & carting away debris to all leads & lifts all complete debris removal at desired site area NPV TYPE INJECTIONFixing of NRV Type Injection Nozzles/Packers: Drilling of holes of 14 mm dia and Approx. 125 mm or as per the thickness of the RCC member, (for atlest 1/3 depth of the member in staggered pattern) deep in the bodyof the concrete for slab, columns or beams and fixing of nozzles as per designers recommendations or at 300mm C/C bothways. EPOXY GORUTINGEpoxy Resin Injection Grouting :Providing low viscosity thermosetting free flow two component based resin Epoxy Grouting for cracks less than 3mm wide in R.C.C.members, columns, beams, junctions of column and beam and slab, etc. with non shrink, free flow low viscosity solvent free epoxy grout with 3 to 5 kg/cm2 pressure, including cleaning, chipping, and removing any loose material with tools, brush and forced air, over the crack, seal exposed crack and provide nozzle at take off point of grout. Sikadur / CERA EPLV POLYMER REPAIRSPolymer Repairs - Patching or leveling the damaged surface: Polymer Modified Mortar: Cleaning the rebars with rust converter for giving anti corrosion treatment of rebars .Cleaning the concrete with compressed air. Applying two coats of Steel Protective Coating to the rebars .Applying Epoxy bond coat for bonding of old and new concrete mortar Epoxy Bonding Agent to the concrete and steel surface. Applying High Strength Polymer modified cement mortar to patch up the damaged concrete section in planks of 25 mm thickness. Curing the repaired surface for 1 days.